coreboot-gerrit March 2022

coreboot-gerrit@coreboot.org

1 participants
6696 discussions

Change in coreboot[master]: [UNTESTED] sb/intel/bd82x6x: Fix replay issues
by Angel Pons (Code Review) 11 Apr '24

11 Apr '24

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/49165 ) Change subject: [UNTESTED] sb/intel/bd82x6x: Fix replay issues ...................................................................... [UNTESTED] sb/intel/bd82x6x: Fix replay issues Rewrite suspicious register handling as per reference code. Proper handling of the value in the RPC register needs some IOBP operations, and will be done in a follow-up once `pch_iobp_update` can be used. Change-Id: I40c7eb2323c22185ca8184166b3ca225c61e9299 Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M src/southbridge/intel/bd82x6x/early_pch.c 1 file changed, 23 insertions(+), 23 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/65/49165/1 diff --git a/src/southbridge/intel/bd82x6x/early_pch.c b/src/southbridge/intel/bd82x6x/early_pch.c index 767d3ad..6daafe0 100644 --- a/src/southbridge/intel/bd82x6x/early_pch.c +++ b/src/southbridge/intel/bd82x6x/early_pch.c @@ -16,8 +16,6 @@ #include "pch.h" #include "chip.h" -#define SOUTHBRIDGE PCI_DEV(0, 0x1f, 0) - static void wait_iobp(void) { while (RCBA8(IOBPS) & 1) @@ -67,13 +65,17 @@ void early_pch_init_native_dmi_post(void) { - RCBA32(CIR0); // !!! = 0x01200654 - RCBA32(CIR0) = 0x01200654; - RCBA32(CIR0); // !!! = 0x01200654 - RCBA32(CIR0) = 0x012a0654; - RCBA32(CIR0); // !!! = 0x012a0654 - RCBA8(UPDCR); // !!! = 0x00 - RCBA8(UPDCR) = 0x05; + u32 reg32; + + reg32 = RCBA32(CIR0); + reg32 &= ~(0xff << 16 | 0xfff); + reg32 |= 0x654; /* Set the recommended TC encoding */ + reg32 |= 0x20 << 16; + reg32 |= 0x0a << 16; /* VCp enabled */ + RCBA32(CIR0) = reg32; + RCBA32(CIR0); /* Read back for posted write to take effect */ + + RCBA8(UPDCR) = RCBA8(UPDCR) | 1 << 2 | 1 << 0; /* * Virtual Channel resources must match settings in DMIBAR! @@ -135,23 +137,21 @@ void early_pch_init_native(void) { - pci_write_config8(SOUTHBRIDGE, 0xa6, pci_read_config8(SOUTHBRIDGE, 0xa6) | 2); + /* Lock down PMBASE */ + pci_or_config8(PCH_LPC_DEV, GEN_PMCON_LOCK, 1 << 1); - RCBA32(CIR1) = 0x00109000; - RCBA32(REC); // !!! = 0x00000000 - RCBA32(REC) = 0x40000000; + RCBA32(CIR1) = 0x00109000; /* Mask some errors */ + RCBA32_OR(REC, 1 << 30); RCBA32(0x100c) = 0x01110000; - RCBA8(0x2340) = 0x1b; - RCBA32(CIR6); // !!! = 0x0a080000 - RCBA32(CIR6) = 0x0a280000; - RCBA32(0x2310); // !!! = 0xc809605b - RCBA32(0x2310) = 0xa809605b; + RCBA8(0x2340) = 0x1b; /* Set Gen 1 Common Clock N_FTS */ + RCBA32_OR(CIR6, 1 << 21); + RCBA32_AND_OR(0x2310, ~(3 << 29), 1 << 29); RCBA32(DMC2) = 0x00854c74; - RCBA8(RPC); // !!! = 0x00 - RCBA32(0x2310); // !!! = 0xa809605b - RCBA32(0x2310) = 0xa809605b; - RCBA32(0x2310); // !!! = 0xa809605b - RCBA32(0x2310) = 0xa809605b; + + /* TODO: Handle non-zero cases */ + RCBA8(RPC); + RCBA32_AND_OR(0x2310, ~(3 << 22), 0); + RCBA32_AND_OR(0x2310, ~(3 << 20), 0); write_iobp(0xea007f62, 0x00590133); write_iobp(0xec007f62, 0x00590133); -- To view, visit https://review.coreboot.org/c/coreboot/+/49165 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I40c7eb2323c22185ca8184166b3ca225c61e9299 Gerrit-Change-Number: 49165 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

2 3

Change in libgfxinit[master]: gma: Use a full `case` statement in Decode_Stolen
by Angel Pons (Code Review) 11 Apr '24

11 Apr '24

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/libgfxinit/+/44934 ) Change subject: gma: Use a full `case` statement in Decode_Stolen ...................................................................... gma: Use a full `case` statement in Decode_Stolen Hopefully, this will cause a `missing case` warning when adding support for a new platform, instead of silently using the wrong functions. Change-Id: I39f37e931977f4f437b619188436c37752f6b915 Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M common/hw-gfx-gma.adb 1 file changed, 13 insertions(+), 14 deletions(-) git pull ssh://review.coreboot.org:29418/libgfxinit refs/changes/34/44934/1 diff --git a/common/hw-gfx-gma.adb b/common/hw-gfx-gma.adb index 9157bbe..f36470e 100644 --- a/common/hw-gfx-gma.adb +++ b/common/hw-gfx-gma.adb @@ -739,20 +739,19 @@ GGC : Word16; begin Dev.Read16 (GGC, GGC_Reg); - if Config.Gen_G45 or Config.CPU_Ironlake then - GTT_Size := GTT_Size_Gen4 (GGC); - Stolen_Size := Stolen_Size_Gen4 (GGC); - elsif Config.CPU_Sandybridge or Config.CPU_Ivybridge or Config.CPU_Haswell - then - GTT_Size := GTT_Size_Gen6 (GGC); - Stolen_Size := Stolen_Size_Gen6 (GGC); - elsif Config.CPU_Broadwell then - GTT_Size := GTT_Size_Gen8 (GGC); - Stolen_Size := Stolen_Size_Gen8 (GGC); - else - GTT_Size := GTT_Size_Gen8 (GGC); - Stolen_Size := Stolen_Size_Gen9 (GGC); - end if; + + -- Upcasting is necessary to cover all cases + GTT_Size := + (case CPU_Type (Config.CPU) is + when G45 .. Ironlake => GTT_Size_Gen4 (GGC), + when Sandybridge .. Haswell => GTT_Size_Gen6 (GGC), + when Broadwell .. Kabylake => GTT_Size_Gen8 (GGC)); + Stolen_Size := + (case CPU_Type (Config.CPU) is + when G45 .. Ironlake => Stolen_Size_Gen4 (GGC), + when Sandybridge .. Haswell => Stolen_Size_Gen6 (GGC), + when Broadwell => Stolen_Size_Gen8 (GGC), + when Broxton .. Kabylake => Stolen_Size_Gen9 (GGC)); end Decode_Stolen; -- Additional runtime validation that FB fits stolen memory and aperture. -- To view, visit https://review.coreboot.org/c/libgfxinit/+/44934 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: libgfxinit Gerrit-Branch: master Gerrit-Change-Id: I39f37e931977f4f437b619188436c37752f6b915 Gerrit-Change-Number: 44934 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

2 2

Change in libgfxinit[master]: gma registers: Allow to specify an offset for display registers
by Angel Pons (Code Review) 11 Apr '24

11 Apr '24

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/libgfxinit/+/44786 ) Change subject: gma registers: Allow to specify an offset for display registers ...................................................................... gma registers: Allow to specify an offset for display registers Certain platforms, namely Bay Trail and Braswell, have the display engine registers at an offset relative to GTTMMADR base. Apart from that, the registers are rather similar to the ones on GMCH platforms. Allow platforms to specify at which offset within GTTMM the display registers are located. Use zero for all currently-supported platforms. Change-Id: Id5497a23776e9aa9e2fd5ca0479030cb8e55712f Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M common/hw-gfx-gma-config.ads.template M common/hw-gfx-gma-registers.adb 2 files changed, 3 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/libgfxinit refs/changes/86/44786/1 diff --git a/common/hw-gfx-gma-config.ads.template b/common/hw-gfx-gma-config.ads.template index 241fe8e..ecbd908 100644 --- a/common/hw-gfx-gma-config.ads.template +++ b/common/hw-gfx-gma-config.ads.template @@ -55,6 +55,8 @@ Default_MMIO_Base : constant := <<DEFAULT_MMIO_BASE>>; + Display_Base_Offset : constant := 0; + LVDS_Dual_Threshold : constant := 95_000_000; Ignore_Presence_Straps : constant Boolean := <<IGNORE_STRAPS>>; diff --git a/common/hw-gfx-gma-registers.adb b/common/hw-gfx-gma-registers.adb index 3f0d7ae..5ea134a 100644 --- a/common/hw-gfx-gma-registers.adb +++ b/common/hw-gfx-gma-registers.adb @@ -211,7 +211,7 @@ SPARK_Mode => Off is begin - return Reg'Enum_Rep; + return Reg'Enum_Rep + Config.Display_Base_Offset; end Index; end Rep; -- To view, visit https://review.coreboot.org/c/libgfxinit/+/44786 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: libgfxinit Gerrit-Branch: master Gerrit-Change-Id: Id5497a23776e9aa9e2fd5ca0479030cb8e55712f Gerrit-Change-Number: 44786 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

2 18

Change in libgfxinit[master]: Add Bay Trail options
by Angel Pons (Code Review) 11 Apr '24

11 Apr '24

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/libgfxinit/+/44790 ) Change subject: Add Bay Trail options ...................................................................... Add Bay Trail options This will build the G45 code, though. Actual Bay Trail code will be added in subsequent commits. Change-Id: Ib30ea668da9641ccf1f94f8f25cfb897faa54aaa Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M common/Makefile.inc M common/hw-gfx-gma-config.ads.template M common/hw-gfx-gma-config_helpers.adb M common/hw-gfx-gma-panel.adb M common/hw-gfx-gma-registers.adb M common/hw-gfx-gma-registers.ads M common/hw-gfx-gma.adb M common/hw-gfx-gma.ads A common/valleyview/Makefile.inc A configs/baytrail 10 files changed, 154 insertions(+), 50 deletions(-) git pull ssh://review.coreboot.org:29418/libgfxinit refs/changes/90/44790/1 diff --git a/common/Makefile.inc b/common/Makefile.inc index f2a2fbb..8935dda 100644 --- a/common/Makefile.inc +++ b/common/Makefile.inc @@ -57,13 +57,14 @@ CONFIG_GFX_GMA_ANALOG_I2C_PORT := $(call strip_quotes,$(CONFIG_GFX_GMA_ANALOG_I2C_PORT)) CONFIG_GFX_GMA_IGNORE_PRESENCE_STRAPS := $(if $(filter y,$(CONFIG_GFX_GMA_IGNORE_PRESENCE_STRAPS)),True,False) -_GEN_TLA_SUBSTITUTIONS := $g45\|ilk\|hsw\|skl$ +_GEN_TLA_SUBSTITUTIONS := $g45\|vlv\|ilk\|hsw\|skl$ _GEN_NONCONST := $(strip \ $(if $(filter G45,$(CONFIG_GFX_GMA_GENERATION)),g45, \ + $(if $(filter Valleyview,$(CONFIG_GFX_GMA_GENERATION)),vlv, \ $(if $(filter Ironlake,$(CONFIG_GFX_GMA_GENERATION)),ilk, \ $(if $(filter Haswell,$(CONFIG_GFX_GMA_GENERATION)),hsw, \ - $(if $(filter Skylake,$(CONFIG_GFX_GMA_GENERATION)),skl))))) + $(if $(filter Skylake,$(CONFIG_GFX_GMA_GENERATION)),skl)))))) # GNATprove (GPL 2017) doesn't realize when a boolean expression # that depends both on static values and variables can be evalu- # ated at compile time (e.g. `False and then Variable` is always @@ -113,6 +114,8 @@ ifneq ($(filter G45,$(CONFIG_GFX_GMA_GENERATION)),) subdirs-y += g45 +else ifneq ($(filter Valleyview,$(CONFIG_GFX_GMA_GENERATION)),) +subdirs-y += valleyview else ifneq ($(filter Ironlake,$(CONFIG_GFX_GMA_GENERATION)),) subdirs-y += ironlake else ifneq ($(filter Haswell,$(CONFIG_GFX_GMA_GENERATION)),) diff --git a/common/hw-gfx-gma-config.ads.template b/common/hw-gfx-gma-config.ads.template index a39ecd9..b260e76 100644 --- a/common/hw-gfx-gma-config.ads.template +++ b/common/hw-gfx-gma-config.ads.template @@ -20,18 +20,20 @@ CPU_First : constant CPU_Type := (case Gen is - when G45 => G45, - when Ironlake => Ironlake, - when Haswell => Haswell, - when Broxton => Broxton, - when Skylake => Skylake); + when G45 => G45, + when Valleyview => Baytrail, + when Ironlake => Ironlake, + when Haswell => Haswell, + when Broxton => Broxton, + when Skylake => Skylake); CPU_Last : constant CPU_Type := (case Gen is - when G45 => GM45, - when Ironlake => Ivybridge, - when Haswell => Broadwell, - when Broxton => Broxton, - when Skylake => Kabylake); + when G45 => GM45, + when Valleyview => Baytrail, + when Ironlake => Ivybridge, + when Haswell => Broadwell, + when Broxton => Broxton, + when Skylake => Kabylake); CPU_Var_Last : constant CPU_Variant := (case Gen is when Haswell | Skylake => ULX, @@ -118,6 +120,7 @@ -- values start after a line break. Gen_G45 : <genbool> := Gen = G45; + Gen_Valleyview : <genbool> := Gen = Valleyview; Gen_Ironlake : <genbool> := Gen = Ironlake; Gen_Haswell : <genbool> := Gen = Haswell; Gen_Broxton : <genbool> := Gen = Broxton; @@ -160,8 +163,9 @@ Is_LP : <hswsklbool> := Is_ULT or Is_ULX; ---------- CPU pipe: --------- - Has_Tertiary_Pipe : <ilkbool> := Ivybridge_On; - Disable_Trickle_Feed : <genbool> := not Gen_Haswell; + Has_Tertiary_Pipe : <ilkbool> := Ivybridge_On; -- VLV: False -- c.f. EDS or similar +-- Disable_Trickle_Feed : <genbool> := not Gen_Haswell; -- VLV: True -- intel_display_power.c: vlv_init_display_clock_gating() + Disable_Trickle_Feed : <genbool> := not Gen_Haswell and not Gen_Valleyview; -- VLV: False -- wise icon says: intel_display.c: i9xx_plane_ctl() conditions around 'DISPPLANE_TRICKLE_FEED_DISABLE' Pipe_Enabled_Workaround : <hswbool> := CPU_Broadwell; Has_EDP_Transcoder : <genbool> := Haswell_On; Use_PDW_For_EDP_Scaling : <hswbool> := CPU_Haswell; @@ -176,9 +180,15 @@ Has_Ivybridge_Cursors : <ilkbool> := Ivybridge_On; VGA_Plane_Workaround : <ilkbool> := CPU_Ivybridge; Has_GMCH_DP_Transcoder : <genbool> := Gen_G45; - Has_GMCH_VGACNTRL : <genbool> := Gen_G45; - Has_GMCH_PFIT_CONTROL : <genbool> := Gen_G45; + Has_GMCH_VGACNTRL : <genbool> := Gen_G45 or Gen_Valleyview; + Has_GMCH_PFIT_CONTROL : <genbool> := Gen_G45 or Gen_Valleyview; + -- wise icon checks bay trail and says: + -- + -- Looks like there are two sets of PP controls and they are tied to the + -- chosen display pipe (instead of the set of physical pins as usual). + -- This will screw us eventually, but nothing to worry about now. + -- --------- Panel power: ------- Has_PP_Write_Protection : <genbool> := Up_To_Ironlake; Has_PP_Port_Select : <genbool> := Up_To_Ironlake; @@ -188,7 +198,7 @@ Has_New_Backlight_Control : <genbool> := Gen_Broxton; ----------- PCH/FDI: --------- - Has_PCH : <genbool> := not Gen_Broxton and not Gen_G45; + Has_PCH : <genbool> := not (Gen_Broxton or Gen_Valleyview or Gen_G45); Has_PCH_DAC : <hswbool> := (Gen_Ironlake or (Gen_Haswell and then not Is_LP)); @@ -209,7 +219,7 @@ Has_FDI_RX_Power_Down : <genbool> := Gen_Haswell; ---------- Clocks: ----------- - Has_GMCH_RawClk : <genbool> := Gen_G45; + Has_GMCH_RawClk : <genbool> := Gen_G45 or Gen_Valleyview; Has_GMCH_Mobile_VCO : <g45bool> := GMCH_GM45; Has_Broadwell_CDClk : <hswbool> := CPU_Broadwell; Can_Switch_CDClk : <hswbool> := Broadwell_On; @@ -298,6 +308,7 @@ Default_CDClk_Freq : <ilkhswvar> CDClk_Range := (if Gen_G45 then 320_000_000 -- unused + elsif Gen_Valleyview then 320_000_000 -- runtime configurable elsif CPU_Ironlake then 450_000_000 elsif CPU_Sandybridge or CPU_Ivybridge then 400_000_000 elsif Gen_Haswell and then Is_ULX then 337_500_000 @@ -308,6 +319,7 @@ Default_RawClk_Freq : <hswvar> Frequency_Type := (if Gen_G45 then 100_000_000 -- unused, depends on FSB + elsif Gen_Valleyview then 100_000_000 -- not constant, must be looked at runtime elsif Gen_Ironlake then 125_000_000 elsif Gen_Haswell then (if Is_LP then 24_000_000 else 125_000_000) elsif Gen_Broxton then Frequency_Type'First -- none needed @@ -326,7 +338,7 @@ (Primary => 4096, Secondary => 2048, Tertiary => Pos32'First) - elsif Gen_Ironlake or CPU_Haswell then + elsif Gen_Valleyview or Gen_Ironlake or CPU_Haswell then (Primary => 4096, Secondary => 2048, Tertiary => 2048) @@ -349,12 +361,12 @@ HDMI_Max_Clock_24bpp : constant Frequency_Type := (case Gen is when Generation'First .. G45 => 165_000_000, - when Ironlake => 225_000_000, + when Valleyview .. Ironlake => 225_000_000, when Haswell .. Generation'Last => 300_000_000); ---------------------------------------------------------------------------- - Display_Base_Offset : constant := 0; + Display_Base_Offset : constant := (if Gen_Valleyview then 16#18_0000# else 0); GTT_PTE_Size : <hswvar> Natural := (if Has_64bit_GTT then 8 else 4); @@ -379,6 +391,10 @@ -- From Haswell on, we have to distinguish between -- Normal, ULT (U CPU lines) and ULX (Y CPU lines). + function Is_Baytrail (Device_Id : Word16) return Boolean is -- VLV: i915_pciids.h: INTEL_VLV_IDS + ((Device_Id and 16#fffc#) = 16#0f30# or + (Device_Id and 16#fffd#) = 16#0155#); + function Is_Haswell_Y (Device_Id : Word16) return Boolean is ((Device_Id and 16#ffef#) = 16#0a0e#); function Is_Haswell_U (Device_Id : Word16) return Boolean is @@ -450,6 +466,7 @@ (case CPU is when G45 => (Device_Id and 16#ff02#) = 16#2e02#, when GM45 => (Device_Id and 16#fffe#) = 16#2a42#, + when Baytrail => Is_Baytrail (Device_Id), when Ironlake => (Device_Id and 16#fff3#) = 16#0042#, when Sandybridge => (Device_Id and 16#ffc2#) = 16#0102#, when Ivybridge => (Device_Id and 16#ffc3#) = 16#0142#, diff --git a/common/hw-gfx-gma-config_helpers.adb b/common/hw-gfx-gma-config_helpers.adb index 2a09305..4141e15 100644 --- a/common/hw-gfx-gma-config_helpers.adb +++ b/common/hw-gfx-gma-config_helpers.adb @@ -29,7 +29,7 @@ begin return (case Config.Gen is - when G45 => -- everything on GMCH + when G45 | Valleyview => -- everything on GMCH or SoC (case Port is when LVDS => LVDS, when eDP => DIGI_A, -- n/a, actually diff --git a/common/hw-gfx-gma-panel.adb b/common/hw-gfx-gma-panel.adb index e343deb..e5670ae 100644 --- a/common/hw-gfx-gma-panel.adb +++ b/common/hw-gfx-gma-panel.adb @@ -114,12 +114,18 @@ DIVISOR => Registers.PCH_PP_DIVISOR)) -- won't be used else - (Panel_1 .. Panel_2 => + (Panel_1 => (STATUS => Registers.GMCH_PP_STATUS, CONTROL => Registers.GMCH_PP_CONTROL, ON_DELAYS => Registers.GMCH_PP_ON_DELAYS, OFF_DELAYS => Registers.GMCH_PP_OFF_DELAYS, - DIVISOR => Registers.GMCH_PP_DIVISOR))); + DIVISOR => Registers.GMCH_PP_DIVISOR), + Panel_2 => + (STATUS => Registers.VLV_PIPE_B_PP_STATUS, + CONTROL => Registers.VLV_PIPE_B_PP_CONTROL, + ON_DELAYS => Registers.VLV_PIPE_B_PP_ON_DLY, + OFF_DELAYS => Registers.VLV_PIPE_B_PP_OFF_DLY, + DIVISOR => Registers.VLV_PIPE_B_PP_DIVISOR))); function PCH_PP_ON_DELAYS_PWR_UP (US : Natural) return Word32 is begin @@ -256,11 +262,14 @@ end if; if Override_Delays then - if Config.Has_PP_Port_Select then + if Config.Gen_Valleyview then + Port_Select := PCH_PP_ON_DELAYS_PORT_SELECT_DP_C; + elsif Config.Has_PP_Port_Select then Port_Select := (case Config.Panel_Ports (Panel_1) is when LVDS => PCH_PP_ON_DELAYS_PORT_SELECT_LVDS, when eDP => PCH_PP_ON_DELAYS_PORT_SELECT_DP_A, + when DP1 | HDMI1 => PCH_PP_ON_DELAYS_PORT_SELECT_DP_A, -- FIXME: VLV HACK when DP2 | HDMI2 => PCH_PP_ON_DELAYS_PORT_SELECT_DP_C, when DP3 | HDMI3 => PCH_PP_ON_DELAYS_PORT_SELECT_DP_D, when others => 0); diff --git a/common/hw-gfx-gma-registers.adb b/common/hw-gfx-gma-registers.adb index 641f192..66d16e8 100644 --- a/common/hw-gfx-gma-registers.adb +++ b/common/hw-gfx-gma-registers.adb @@ -252,15 +252,18 @@ ---------------------------------------------------------------------------- -- Write a specific register - procedure Write (Register : Registers_Index; Value : Word32) + procedure Write + (Register : Registers_Index; + Value : Word32; + Verbose : Boolean := True) is begin - pragma Debug (Debug.Put (GNAT.Source_Info.Enclosing_Entity & ": ")); - pragma Debug (Debug.Put_Word32 (Value)); - pragma Debug (Debug.Put (" -> ")); - pragma Debug (Debug.Put_Word32 (Register'Enum_Rep * Register_Width)); - pragma Debug (Debug.Put (":")); - pragma Debug (Debug.Put_Line (Registers_Index'Image (Register))); + pragma Debug (Verbose, Debug.Put (GNAT.Source_Info.Enclosing_Entity & ": ")); + pragma Debug (Verbose, Debug.Put_Word32 (Value)); + pragma Debug (Verbose, Debug.Put (" -> ")); + pragma Debug (Verbose, Debug.Put_Word32 (Register'Enum_Rep * Register_Width)); + pragma Debug (Verbose, Debug.Put (":")); + pragma Debug (Verbose, Debug.Put_Line (Registers_Index'Image (Register))); Regs.Write (Rep.Index (Register), Value); pragma Debug (Debug.Register_Write_Wait); @@ -289,7 +292,7 @@ pragma Warnings (GNATprove, Off, "unused assignment to ""Ignored_Success"""); -- Wait for the bits in @Register@ indicated by @Mask@ to be of @Value@ - procedure Wait + procedure Wait_Quietly (Register : in Registers_Index; Mask : in Word32; Value : in Word32; @@ -301,14 +304,6 @@ Timeout : Time.T; Timed_Out : Boolean := False; begin - pragma Debug (Debug.Put (GNAT.Source_Info.Enclosing_Entity & ": ")); - pragma Debug (Debug.Put_Word32 (Value)); - pragma Debug (Debug.Put (" <- ")); - pragma Debug (Debug.Put_Word32 (Mask)); - pragma Debug (Debug.Put (" & ")); - pragma Debug (Debug.Put_Word32 (Register'Enum_Rep * Register_Width)); - pragma Debug (Debug.Put (":")); - pragma Debug (Debug.Put_Line (Registers_Index'Image (Register))); Timeout := Time.MS_From_Now (TOut_MS); loop @@ -318,14 +313,36 @@ Timed_Out := False; exit; end if; - pragma Debug (Timed_Out, Debug.Put (GNAT.Source_Info.Enclosing_Entity)); - pragma Debug (Timed_Out, Debug.Put_Line (": Timed Out!")); exit when Timed_Out; Timed_Out := Time.Timed_Out (Timeout); end loop; Success := not Timed_Out; + end Wait_Quietly; + + procedure Wait + (Register : in Registers_Index; + Mask : in Word32; + Value : in Word32; + TOut_MS : in Natural := Default_Timeout_MS; + Verbose : in Boolean := False; + Success : out Boolean) + is + begin + pragma Debug (Debug.Put (GNAT.Source_Info.Enclosing_Entity & ": ")); + pragma Debug (Debug.Put_Word32 (Value)); + pragma Debug (Debug.Put (" <- ")); + pragma Debug (Debug.Put_Word32 (Mask)); + pragma Debug (Debug.Put (" & ")); + pragma Debug (Debug.Put_Word32 (Register'Enum_Rep * Register_Width)); + pragma Debug (Debug.Put (":")); + pragma Debug (Debug.Put_Line (Registers_Index'Image (Register))); + + Wait_Quietly (Register, Mask, Value, TOut_MS, Verbose, Success); + + pragma Debug (not Success, Debug.Put (GNAT.Source_Info.Enclosing_Entity)); + pragma Debug (not Success, Debug.Put_Line (": Timed Out!")); end Wait; procedure Wait diff --git a/common/hw-gfx-gma-registers.ads b/common/hw-gfx-gma-registers.ads index 68e5664..b158300 100644 --- a/common/hw-gfx-gma-registers.ads +++ b/common/hw-gfx-gma-registers.ads @@ -46,6 +46,10 @@ MI_MODE, INSTPM, GT_MODE, + VLV_IOSF_DOORBELL_REQ, + VLV_IOSF_DATA, + VLV_IOSF_ADDR, + VLV_DPIO_CTL, CACHE_MODE_0, CTX_SIZE, PP_DCLV_HIGH, @@ -188,6 +192,11 @@ GMCH_PP_OFF_DELAYS, GMCH_PP_DIVISOR, GMCH_PFIT_CONTROL, + VLV_PIPE_B_PP_STATUS, + VLV_PIPE_B_PP_CONTROL, + VLV_PIPE_B_PP_ON_DLY, + VLV_PIPE_B_PP_OFF_DLY, + VLV_PIPE_B_PP_DIVISOR, PIPEB_DDI_FUNC_CTL, PIPEB_MSA_MISC, SRD_CTL_B, @@ -757,7 +766,8 @@ BXT_PORT_PCS_DW12_GRP_A, BXT_PORT_TX_DW2_GRP_A, BXT_PORT_TX_DW3_GRP_A, - BXT_PORT_TX_DW4_GRP_A); + BXT_PORT_TX_DW4_GRP_A + ); pragma Warnings (GNATprove, Off, "pragma ""KEEP_NAMES"" ignored *(not yet supported)", @@ -772,6 +782,16 @@ (Invalid_Register => 0, --------------------------------------------------------------------------- + -- Valleyview registers + --------------------------------------------------------------------------- + + VLV_IOSF_DOORBELL_REQ => 16#00_2100# / Register_Width, + VLV_IOSF_DATA => 16#00_2104# / Register_Width, + VLV_IOSF_ADDR => 16#00_2108# / Register_Width, + + VLV_DPIO_CTL => 16#00_2110# / Register_Width, + + --------------------------------------------------------------------------- -- Pipe A registers --------------------------------------------------------------------------- @@ -800,8 +820,8 @@ PIPEA_DATA_N1 => 16#06_0034# / Register_Width, PIPEA_LINK_M1 => 16#06_0040# / Register_Width, PIPEA_LINK_N1 => 16#06_0044# / Register_Width, - PIPEA_GMCH_DATA_M => 16#07_0050# / Register_Width, - PIPEA_GMCH_DATA_N => 16#07_0054# / Register_Width, + PIPEA_GMCH_DATA_M => 16#07_0050# / Register_Width, -- aliased by VLV_DDL1 + PIPEA_GMCH_DATA_N => 16#07_0054# / Register_Width, -- aliased by VLV_DDL2 PIPEA_GMCH_LINK_M => 16#07_0060# / Register_Width, PIPEA_GMCH_LINK_N => 16#07_0064# / Register_Width, PIPEA_DDI_FUNC_CTL => 16#06_0400# / Register_Width, @@ -1436,6 +1456,11 @@ GMCH_PP_OFF_DELAYS => 16#06_120c# / Register_Width, GMCH_PP_DIVISOR => 16#06_1210# / Register_Width, GMCH_PFIT_CONTROL => 16#06_1230# / Register_Width, + VLV_PIPE_B_PP_STATUS => 16#06_1300# / Register_Width, + VLV_PIPE_B_PP_CONTROL => 16#06_1304# / Register_Width, + VLV_PIPE_B_PP_ON_DLY => 16#06_1308# / Register_Width, + VLV_PIPE_B_PP_OFF_DLY => 16#06_130c# / Register_Width, + VLV_PIPE_B_PP_DIVISOR => 16#06_1310# / Register_Width, PCH_PP_STATUS => 16#0c_7200# / Register_Width, -- aliased with BXT_PP_STATUS_1 PCH_PP_CONTROL => 16#0c_7204# / Register_Width, -- aliased with BXT_PP_CONTROL_1 PCH_PP_ON_DELAYS => 16#0c_7208# / Register_Width, -- aliased with BXT_PP_ON_DELAYS_1 @@ -1668,6 +1693,8 @@ GMCH_ADPA : constant Registers_Index := FDI_TX_CTL_B; GMCH_HDMIB : constant Registers_Index := GMCH_SDVOB; GMCH_HDMIC : constant Registers_Index := GMCH_SDVOC; + VLV_DDL1 : constant Registers_Index := PIPEA_GMCH_DATA_M; + VLV_DDL2 : constant Registers_Index := PIPEA_GMCH_DATA_N; CURACNTR : constant Registers_Index := CUR_CTL_A; CURABASE : constant Registers_Index := CUR_BASE_A; CURAPOS : constant Registers_Index := CUR_POS_A; @@ -1704,10 +1731,11 @@ procedure Write (Register : Registers_Index; - Value : Word32) + Value : Word32; + Verbose : Boolean := True) with Global => (In_Out => Register_State), - Depends => (Register_State => (Register, Register_State, Value)), + Depends => (Register_State => (Register, Register_State, Value), null => Verbose), Pre => True, Post => True; @@ -1718,6 +1746,14 @@ pragma Warnings (GNATprove, Off, "unused initial value of ""Verbose""", Reason => "Only used on debugging path"); + + procedure Wait_Quietly + (Register : in Registers_Index; + Mask : in Word32; + Value : in Word32; + TOut_MS : in Natural := Default_Timeout_MS; + Verbose : in Boolean := False; + Success : out Boolean); procedure Wait (Register : in Registers_Index; Mask : in Word32; diff --git a/common/hw-gfx-gma.adb b/common/hw-gfx-gma.adb index 9157bbe..a363738 100644 --- a/common/hw-gfx-gma.adb +++ b/common/hw-gfx-gma.adb @@ -422,7 +422,7 @@ Audio_VID_DID : Word32; begin case Config.Gen is - when G45 => + when G45 .. Valleyview => Registers.Read (Registers.G4X_AUD_VID_DID, Audio_VID_DID); when Ironlake => Registers.Read (Registers.PCH_AUD_VID_DID, Audio_VID_DID); diff --git a/common/hw-gfx-gma.ads b/common/hw-gfx-gma.ads index 1215fc5..d7f7ab8 100644 --- a/common/hw-gfx-gma.ads +++ b/common/hw-gfx-gma.ads @@ -33,11 +33,12 @@ subtype GTT_Range is Natural range 0 .. 16#8_0000# - 1; GTT_Rotation_Offset : constant GTT_Range := GTT_Range'Last / 2 + 1; - type Generation is (G45, Ironlake, Haswell, Broxton, Skylake); + type Generation is (G45, Valleyview, Ironlake, Haswell, Broxton, Skylake); type CPU_Type is (G45, GM45, + Baytrail, Ironlake, Sandybridge, Ivybridge, diff --git a/common/valleyview/Makefile.inc b/common/valleyview/Makefile.inc new file mode 100644 index 0000000..766ade0 --- /dev/null +++ b/common/valleyview/Makefile.inc @@ -0,0 +1,15 @@ +gfxinit-y += ../g45/hw-gfx-gma-connectors.adb +gfxinit-y += ../g45/hw-gfx-gma-gmch-dp.adb +gfxinit-y += ../g45/hw-gfx-gma-gmch-dp.ads +gfxinit-y += ../g45/hw-gfx-gma-gmch-hdmi.adb +gfxinit-y += ../g45/hw-gfx-gma-gmch-hdmi.ads +gfxinit-y += ../g45/hw-gfx-gma-gmch-lvds.adb +gfxinit-y += ../g45/hw-gfx-gma-gmch-lvds.ads +gfxinit-y += ../g45/hw-gfx-gma-gmch-vga.adb +gfxinit-y += ../g45/hw-gfx-gma-gmch-vga.ads +gfxinit-y += ../g45/hw-gfx-gma-plls.adb +gfxinit-y += ../g45/hw-gfx-gma-plls.ads +gfxinit-y += ../g45/hw-gfx-gma-port_detect.adb +gfxinit-y += ../g45/hw-gfx-gma-gmch.ads +gfxinit-y += ../g45/hw-gfx-gma-power_and_clocks.ads +gfxinit-y += ../g45/hw-gfx-gma-power_and_clocks.adb diff --git a/configs/baytrail b/configs/baytrail new file mode 100644 index 0000000..9df28fd --- /dev/null +++ b/configs/baytrail @@ -0,0 +1,6 @@ +CONFIG_GFX_GMA_DYN_CPU = y +CONFIG_GFX_GMA_GENERATION = Valleyview +CONFIG_GFX_GMA_PANEL_1_PORT = DP1 +CONFIG_GFX_GMA_PANEL_2_PORT = DP2 +CONFIG_GFX_GMA_ANALOG_I2C_PORT = PCH_DAC +CONFIG_GFX_GMA_DEFAULT_MMIO = 16\#e000_0000\# -- To view, visit https://review.coreboot.org/c/libgfxinit/+/44790 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: libgfxinit Gerrit-Branch: master Gerrit-Change-Id: Ib30ea668da9641ccf1f94f8f25cfb897faa54aaa Gerrit-Change-Number: 44790 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

2 15

Change in coreboot[master]: arch,toolchain,xcompile: Use GCC as linker
by Jacob Garber (Code Review) 04 Apr '24

04 Apr '24

Jacob Garber has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/40811 ) Change subject: arch,toolchain,xcompile: Use GCC as linker ...................................................................... arch,toolchain,xcompile: Use GCC as linker Code generation when using LTO is not done until after linking, so the compiler must be invoked at all linking stages instead of the linker. Replace $(LD) with GCC, and prefix all linker-specific flags with -Wl so they will be passed to the linker. Change-Id: Ia551cf84c8f6eb3b010450fc572876a318a257d1 Signed-off-by: Jacob Garber <jgarber1(a)ualberta.ca> --- M Makefile.inc M src/arch/arm/Makefile.inc M src/arch/arm64/Makefile.inc M src/arch/ppc64/Makefile.inc M src/arch/riscv/Makefile.inc M src/arch/x86/Makefile.inc M src/cpu/x86/smm/Makefile.inc M src/lib/Makefile.inc M toolchain.inc M util/xcompile/xcompile 10 files changed, 33 insertions(+), 33 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/11/40811/1 diff --git a/Makefile.inc b/Makefile.inc index e315732..ef95870 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -479,7 +479,7 @@ # Disable style checks for now ADAFLAGS_common += -gnatyN -LDFLAGS_common := --gc-sections -nostdlib -nostartfiles -static --emit-relocs +LDFLAGS_common := -nostdlib -nostartfiles -static -Wl,--emit-relocs,--gc-sections ifeq ($(CONFIG_WARNINGS_ARE_ERRORS),y) CFLAGS_common += -Werror diff --git a/src/arch/arm/Makefile.inc b/src/arch/arm/Makefile.inc index a8abfaf..f13bf1e 100644 --- a/src/arch/arm/Makefile.inc +++ b/src/arch/arm/Makefile.inc @@ -54,11 +54,11 @@ $(objcbfs)/bootblock.debug: $$(bootblock-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) -T $(call src-to-obj,bootblock,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(bootblock-objs)) --end-group + $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) -T $(call src-to-obj,bootblock,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(bootblock-objs)) -Wl,--end-group $(objcbfs)/decompressor.debug: $$(decompressor-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) -T $(call src-to-obj,decompressor,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(decompressor-objs)) --end-group + $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) -T $(call src-to-obj,decompressor,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(decompressor-objs)) -Wl,--end-group endif # CONFIG_ARCH_BOOTBLOCK_ARM @@ -70,7 +70,7 @@ $(objcbfs)/verstage.debug: $$(verstage-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_verstage) $(LDFLAGS_verstage) -o $@ -L$(obj) -T $(call src-to-obj,verstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(verstage-objs)) --end-group + $(LD_verstage) $(LDFLAGS_verstage) -o $@ -L$(obj) -T $(call src-to-obj,verstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(verstage-objs)) -Wl,--end-group verstage-y += boot.c verstage-y += div0.c @@ -103,7 +103,7 @@ $(objcbfs)/romstage.debug: $$(romstage-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_romstage) $(LDFLAGS_romstage) -o $@ -L$(obj) -T $(call src-to-obj,romstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(romstage-objs)) --end-group + $(LD_romstage) $(LDFLAGS_romstage) -o $@ -L$(obj) -T $(call src-to-obj,romstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(romstage-objs)) -Wl,--end-group endif # CONFIG_ARCH_ROMSTAGE_ARM @@ -132,6 +132,6 @@ $(objcbfs)/ramstage.debug: $$(ramstage-objs) @printf " CC $(subst $(obj)/,,$(@))\n" - $(LD_ramstage) $(LDFLAGS_ramstage) -o $@ -L$(obj) -T $(call src-to-obj,ramstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(ramstage-objs)) --end-group + $(LD_ramstage) $(LDFLAGS_ramstage) -o $@ -L$(obj) -T $(call src-to-obj,ramstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(ramstage-objs)) -Wl,--end-group endif # CONFIG_ARCH_RAMSTAGE_ARM diff --git a/src/arch/arm64/Makefile.inc b/src/arch/arm64/Makefile.inc index c3d1fe5..e9d6d05 100644 --- a/src/arch/arm64/Makefile.inc +++ b/src/arch/arm64/Makefile.inc @@ -50,11 +50,11 @@ $(objcbfs)/bootblock.debug: $$(bootblock-objs) $(obj)/config.h @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) --whole-archive --start-group $(filter-out %.ld,$(bootblock-objs)) --end-group -T $(call src-to-obj,bootblock,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) + $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(bootblock-objs)) -Wl,--end-group -T $(call src-to-obj,bootblock,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) $(objcbfs)/decompressor.debug: $$(decompressor-objs) $(obj)/config.h @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) --whole-archive --start-group $(filter-out %.ld,$(decompressor-objs)) --end-group -T $(call src-to-obj,decompressor,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) + $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(decompressor-objs)) -Wl,--end-group -T $(call src-to-obj,decompressor,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) endif # CONFIG_ARCH_BOOTBLOCK_ARM64 @@ -66,7 +66,7 @@ $(objcbfs)/verstage.debug: $$(verstage-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_verstage) $(LDFLAGS_verstage) -o $@ -L$(obj) --whole-archive --start-group $(filter-out %.ld,$(verstage-objs)) --end-group -T $(call src-to-obj,verstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) + $(LD_verstage) $(LDFLAGS_verstage) -o $@ -L$(obj) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(verstage-objs)) -Wl,--end-group -T $(call src-to-obj,verstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) verstage-y += boot.c verstage-y += div0.c @@ -104,7 +104,7 @@ $(objcbfs)/romstage.debug: $$(romstage-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_romstage) $(LDFLAGS_romstage) -o $@ -L$(obj) --whole-archive --start-group $(filter-out %.ld,$(romstage-objs)) --end-group -T $(call src-to-obj,romstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) + $(LD_romstage) $(LDFLAGS_romstage) -o $@ -L$(obj) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(romstage-objs)) -Wl,--end-group -T $(call src-to-obj,romstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) endif # CONFIG_ARCH_ROMSTAGE_ARM64 @@ -139,7 +139,7 @@ $(objcbfs)/ramstage.debug: $$(ramstage-objs) @printf " CC $(subst $(obj)/,,$(@))\n" - $(LD_ramstage) $(LDFLAGS_ramstage) -o $@ -L$(obj) --whole-archive --start-group $(filter-out %.ld,$(ramstage-objs)) --end-group -T $(call src-to-obj,ramstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) + $(LD_ramstage) $(LDFLAGS_ramstage) -o $@ -L$(obj) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(ramstage-objs)) -Wl,--end-group -T $(call src-to-obj,ramstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) # Build ARM Trusted Firmware (BL31) diff --git a/src/arch/ppc64/Makefile.inc b/src/arch/ppc64/Makefile.inc index 1c35f6f..b8da940 100644 --- a/src/arch/ppc64/Makefile.inc +++ b/src/arch/ppc64/Makefile.inc @@ -29,8 +29,8 @@ $(objcbfs)/bootblock.debug: $$(bootblock-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) \ - -T $(call src-to-obj,bootblock,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(bootblock-objs)) \ - $(LIBGCC_FILE_NAME_bootblock) --end-group $(COMPILER_RT_bootblock) + -T $(call src-to-obj,bootblock,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(bootblock-objs)) \ + $(LIBGCC_FILE_NAME_bootblock) -Wl,--end-group $(COMPILER_RT_bootblock) endif @@ -55,7 +55,7 @@ $(objcbfs)/romstage.debug: $$(romstage-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_romstage) $(LDFLAGS_romstage) -o $@ -L$(obj) -T $(call src-to-obj,romstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(romstage-objs)) --end-group $(COMPILER_RT_romstage) + $(LD_romstage) $(LDFLAGS_romstage) -o $@ -L$(obj) -T $(call src-to-obj,romstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(romstage-objs)) -Wl,--end-group $(COMPILER_RT_romstage) romstage-c-ccopts += $(ppc64_flags) romstage-S-ccopts += $(ppc64_asm_flags) @@ -88,7 +88,7 @@ $(objcbfs)/ramstage.debug: $$(ramstage-objs) @printf " CC $(subst $(obj)/,,$(@))\n" - $(LD_ramstage) $(LDFLAGS_ramstage) -o $@ -L$(obj) -T $(call src-to-obj,ramstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(ramstage-objs)) --end-group $(COMPILER_RT_ramstage) + $(LD_ramstage) $(LDFLAGS_ramstage) -o $@ -L$(obj) -T $(call src-to-obj,ramstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(ramstage-objs)) -Wl,--end-group $(COMPILER_RT_ramstage) ramstage-c-ccopts += $(ppc64_flags) ramstage-S-ccopts += $(ppc64_asm_flags) diff --git a/src/arch/riscv/Makefile.inc b/src/arch/riscv/Makefile.inc index 17f225a..fd18e55 100644 --- a/src/arch/riscv/Makefile.inc +++ b/src/arch/riscv/Makefile.inc @@ -69,14 +69,14 @@ $(objcbfs)/bootblock.debug: $$(bootblock-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) \ - -T $(call src-to-obj,bootblock,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(bootblock-objs)) \ - $(LIBGCC_FILE_NAME_bootblock) --end-group $(COMPILER_RT_bootblock) + -T $(call src-to-obj,bootblock,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(bootblock-objs)) \ + $(LIBGCC_FILE_NAME_bootblock) -Wl,--end-group $(COMPILER_RT_bootblock) bootblock-c-ccopts += $(riscv_flags) bootblock-S-ccopts += $(riscv_asm_flags) ifeq ($(CONFIG_ARCH_RISCV_RV32),y) -LDFLAGS_bootblock += -m elf32lriscv +LDFLAGS_bootblock += -Wl,-m,elf32lriscv endif #CONFIG_ARCH_RISCV_RV32 endif #CONFIG_ARCH_BOOTBLOCK_RISCV @@ -104,13 +104,13 @@ $(objcbfs)/romstage.debug: $$(romstage-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_romstage) $(LDFLAGS_romstage) -o $@ -L$(obj) -T $(call src-to-obj,romstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(romstage-objs)) --end-group $(COMPILER_RT_romstage) + $(LD_romstage) $(LDFLAGS_romstage) -o $@ -L$(obj) -T $(call src-to-obj,romstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(romstage-objs)) -Wl,--end-group $(COMPILER_RT_romstage) romstage-c-ccopts += $(riscv_flags) romstage-S-ccopts += $(riscv_asm_flags) ifeq ($(CONFIG_ARCH_RISCV_RV32),y) -LDFLAGS_romstage += -m elf32lriscv +LDFLAGS_romstage += -Wl,-m,elf32lriscv endif #CONFIG_ARCH_RISCV_RV32 endif #CONFIG_ARCH_ROMSTAGE_RISCV @@ -153,13 +153,13 @@ $(objcbfs)/ramstage.debug: $$(ramstage-objs) @printf " CC $(subst $(obj)/,,$(@))\n" - $(LD_ramstage) $(LDFLAGS_ramstage) -o $@ -L$(obj) -T $(call src-to-obj,ramstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(ramstage-objs)) --end-group $(COMPILER_RT_ramstage) + $(LD_ramstage) $(LDFLAGS_ramstage) -o $@ -L$(obj) -T $(call src-to-obj,ramstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(ramstage-objs)) -Wl,--end-group $(COMPILER_RT_ramstage) ramstage-c-ccopts += $(riscv_flags) ramstage-S-ccopts += $(riscv_asm_flags) ifeq ($(CONFIG_ARCH_RISCV_RV32),y) -LDFLAGS_ramstage += -m elf32lriscv +LDFLAGS_ramstage += -Wl,-m,elf32lriscv endif #CONFIG_ARCH_RISCV_RV32 endif #CONFIG_ARCH_RAMSTAGE_RISCV diff --git a/src/arch/x86/Makefile.inc b/src/arch/x86/Makefile.inc index 2d00709..af52f70 100644 --- a/src/arch/x86/Makefile.inc +++ b/src/arch/x86/Makefile.inc @@ -77,7 +77,7 @@ $$(objcbfs)/$(1).debug: $$$$($(1)-libs) $$$$($(1)-objs) @printf " LINK $$(subst $$(obj)/,,$$(@))\n" - $$(LD_$(1)) $$(LDFLAGS_$(1)) -o $$@ -L$$(obj) $$(COMPILER_RT_FLAGS_$(1)) --whole-archive --start-group $$(filter-out %.ld,$$($(1)-objs)) $$($(1)-libs) --no-whole-archive $$(COMPILER_RT_$(1)) --end-group -T $(call src-to-obj,$(1),$(dir)/memlayout.ld) --oformat $(2) + $$(LD_$(1)) $$(LDFLAGS_$(1)) -o $$@ -L$$(obj) $$(COMPILER_RT_FLAGS_$(1)) -Wl,--whole-archive,--start-group $$(filter-out %.ld,$$($(1)-objs)) $$($(1)-libs) -Wl,--no-whole-archive $$(COMPILER_RT_$(1)) -Wl,--end-group -T $(call src-to-obj,$(1),$(dir)/memlayout.ld) -Wl,--oformat=$(2) -LANG=C LC_ALL= $$(OBJCOPY_$(1)) --only-section .illegal_globals $$(@) $$(objcbfs)/$(1)_null.offenders >/dev/null 2>&1 if [ -z "$$$$($$(NM_$(1)) $$(objcbfs)/$(1)_null.offenders 2>&1 | grep 'no symbols')" ];then \ echo "Forbidden global variables in $(1):"; \ @@ -209,11 +209,11 @@ postcar-y += postcar.c postcar-$(CONFIG_COLLECT_TIMESTAMPS_TSC) += timestamp.c -LDFLAGS_postcar += -Map $(objcbfs)/postcar.map +LDFLAGS_postcar += -Wl,-Map,$(objcbfs)/postcar.map $(objcbfs)/postcar.debug: $$(postcar-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_postcar) $(LDFLAGS_postcar) -o $@ -L$(obj) $(COMPILER_RT_FLAGS_postcar) --whole-archive --start-group $(filter-out %.ld,$^) --no-whole-archive $(COMPILER_RT_postcar) --end-group -T $(call src-to-obj,postcar,src/arch/x86/memlayout.ld) + $(LD_postcar) $(LDFLAGS_postcar) -o $@ -L$(obj) $(COMPILER_RT_FLAGS_postcar) -Wl,--whole-archive,--start-group $(filter-out %.ld,$^) -Wl,--no-whole-archive $(COMPILER_RT_postcar) -Wl,--end-group -T $(call src-to-obj,postcar,src/arch/x86/memlayout.ld) $(objcbfs)/postcar.elf: $(objcbfs)/postcar.debug.rmod cp $< $@ @@ -314,9 +314,9 @@ $(objgenerated)/ramstage.o: $$(ramstage-objs) $(COMPILER_RT_ramstage) $$(ramstage-libs) @printf " CC $(subst $(obj)/,,$(@))\n" ifeq ($(CONFIG_ARCH_RAMSTAGE_X86_32),y) - $(LD_ramstage) -m elf_i386 -r -o $@ $(COMPILER_RT_FLAGS_ramstage) --whole-archive --start-group $(filter-out %.ld,$(ramstage-objs)) $(ramstage-libs) --no-whole-archive $(COMPILER_RT_ramstage) --end-group + $(LD_ramstage) -Wl,-m,elf_i386 -r -o $@ $(COMPILER_RT_FLAGS_ramstage) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(ramstage-objs)) $(ramstage-libs) -Wl,--no-whole-archive $(COMPILER_RT_ramstage) -Wl,--end-group else - $(LD_ramstage) -m elf_x86_64 -r -o $@ $(COMPILER_RT_FLAGS_ramstage) --whole-archive --start-group $(filter-out %.ld,$(ramstage-objs)) $(ramstage-libs) --no-whole-archive $(COMPILER_RT_ramstage) --end-group + $(LD_ramstage) -Wl,-m,elf_x86_64 -r -o $@ $(COMPILER_RT_FLAGS_ramstage) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(ramstage-objs)) $(ramstage-libs) -Wl,--no-whole-archive $(COMPILER_RT_ramstage) -Wl,--end-group endif endif # CONFIG_ARCH_RAMSTAGE_X86_32 / CONFIG_ARCH_RAMSTAGE_X86_64 diff --git a/src/cpu/x86/smm/Makefile.inc b/src/cpu/x86/smm/Makefile.inc index 11a4e67..2e63fb3 100644 --- a/src/cpu/x86/smm/Makefile.inc +++ b/src/cpu/x86/smm/Makefile.inc @@ -26,7 +26,7 @@ smm-c-deps:=$$(OPTION_TABLE_H) $(obj)/smm/smm.o: $$(smm-objs) $(COMPILER_RT_smm) - $(LD_smm) -nostdlib -r -o $@ $(COMPILER_RT_FLAGS_smm) --whole-archive --start-group $(smm-objs) --no-whole-archive $(COMPILER_RT_smm) --end-group + $(LD_smm) -nostdlib -r -o $@ $(COMPILER_RT_FLAGS_smm) -Wl,--whole-archive,--start-group $(smm-objs) -Wl,--no-whole-archive $(COMPILER_RT_smm) -Wl,--end-group # change to the target path because objcopy will use the path name in its # ELF symbol names. @@ -53,7 +53,7 @@ # SMM Stub Module. The stub is used as a trampoline for relocation and normal # SMM handling. $(obj)/smmstub/smmstub.o: $$(smmstub-objs) $(COMPILER_RT_smmstub) - $(LD_smmstub) -nostdlib -r -o $@ $(COMPILER_RT_FLAGS_smmstub) --whole-archive --start-group $(smmstub-objs) --no-whole-archive $(COMPILER_RT_smmstub) --end-group + $(LD_smmstub) -nostdlib -r -o $@ $(COMPILER_RT_FLAGS_smmstub) -Wl,--whole-archive,--start-group $(smmstub-objs) -Wl,--no-whole-archive $(COMPILER_RT_smmstub) -Wl,--end-group # Link the SMM stub module with a 0-byte heap. ifeq ($(CONFIG_ARCH_RAMSTAGE_X86_32),y) diff --git a/src/lib/Makefile.inc b/src/lib/Makefile.inc index 085f6b2..adcd16a 100644 --- a/src/lib/Makefile.inc +++ b/src/lib/Makefile.inc @@ -290,7 +290,7 @@ # rmdoule is named $(1).rmod define rmodule_link $(strip $(1)): $(strip $(2)) $$(COMPILER_RT_rmodules_$(4)) $(call src-to-obj,rmodules_$(4),src/lib/rmodule.ld) | $$(RMODTOOL) - $$(LD_rmodules_$(4)) $$(LDFLAGS_rmodules_$(4)) $(RMODULE_LDFLAGS) -T $(call src-to-obj,rmodules_$(4),src/lib/rmodule.ld) --defsym=__heap_size=$(strip $(3)) -o $$@ --whole-archive --start-group $(filter-out %.ld,$(2)) --end-group + $$(LD_rmodules_$(4)) $$(LDFLAGS_rmodules_$(4)) $(RMODULE_LDFLAGS) -T $(call src-to-obj,rmodules_$(4),src/lib/rmodule.ld) -Wl,--defsym=__heap_size=$(strip $(3)) -o $$@ -Wl,--whole-archive,--start-group $(filter-out %.ld,$(2)) -Wl,--end-group $$(NM_rmodules_$(4)) -n $$@ > $$(basename $$(a)).map endef diff --git a/toolchain.inc b/toolchain.inc index 865227b..f52a518 100644 --- a/toolchain.inc +++ b/toolchain.inc @@ -117,7 +117,7 @@ $(error Check your .config file for CONFIG_ARCH_$(1)_* settings)) CC_$(1) := $(CC_$(2)) GCC_$(1) := $(GCC_CC_$(2)) -LD_$(1) := $(LD_$(2)) +LD_$(1) := $(CC_$(2)) NM_$(1) := $(NM_$(2)) AR_$(1) := $(AR_$(2)) GNATBIND_$(1) := $(GNATBIND_$(2)) @@ -130,7 +130,7 @@ CPPFLAGS_$(1) = $$(CPPFLAGS_common) $$(CPPFLAGS_$(2)) -D__ARCH_$(2)__ COMPILER_RT_$(1) := $$(COMPILER_RT_$(2)) COMPILER_RT_FLAGS_$(1) := $$(COMPILER_RT_FLAGS_$(2)) -LDFLAGS_$(1) = $$(LDFLAGS_common) $$(LDFLAGS_$(2)) +LDFLAGS_$(1) = $$(CFLAGS_$(1)) $$(LDFLAGS_common) $$(LDFLAGS_$(2)) endef # define_class: Allows defining any program as dynamic class and compiler tool diff --git a/util/xcompile/xcompile b/util/xcompile/xcompile index 18e08a0..5e32120 100755 --- a/util/xcompile/xcompile +++ b/util/xcompile/xcompile @@ -363,7 +363,7 @@ TCLIST="i386 x86_64" TWIDTH="32" TABI="elf" - CC_RT_EXTRA_GCC="--wrap __divdi3 --wrap __udivdi3 --wrap __moddi3 --wrap __umoddi3" + CC_RT_EXTRA_GCC="-Wl,--wrap=__divdi3,--wrap=__udivdi3,--wrap=__moddi3,--wrap=__umoddi3" } arch_config_ppc64() { -- To view, visit https://review.coreboot.org/c/coreboot/+/40811 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ia551cf84c8f6eb3b010450fc572876a318a257d1 Gerrit-Change-Number: 40811 Gerrit-PatchSet: 1 Gerrit-Owner: Jacob Garber <jgarber1(a)ualberta.ca> Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Philipp Hug <philipp(a)hug.cx> Gerrit-Reviewer: ron minnich <rminnich(a)gmail.com> Gerrit-MessageType: newchange

10 49

Change in ...coreboot[master]: autoport: Add support for Haswell-LynxPoint platform
by Iru Cai (vimacs) (Code Review) 24 Mar '24

24 Mar '24

Hello Iru Cai, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/30890 to review the following change. Change subject: autoport: Add support for Haswell-LynxPoint platform ...................................................................... autoport: Add support for Haswell-LynxPoint platform It can now generate a buildable source for Clevo W650SZ. TODO: - Support Lynx Point LP (GPIO registers differ from non-LP) - Use PCH HD-Audio in azilia instead of the CPU/Northbridge HD-Audio Change-Id: I4f6e8c97b5122101de2f36bba8ba9f8ddd5b813a Signed-off-by: Iru Cai <mytbk920423(a)gmail.com> --- M util/autoport/azalia.go A util/autoport/haswell.go A util/autoport/lynxpoint.go M util/autoport/main.go 4 files changed, 625 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/90/30890/1 diff --git a/util/autoport/azalia.go b/util/autoport/azalia.go index c525189..3090dd0 100644 --- a/util/autoport/azalia.go +++ b/util/autoport/azalia.go @@ -62,4 +62,9 @@ RegisterPCI(0x8086, 0x1c20, azalia{}) /* C216/ivybridge */ RegisterPCI(0x8086, 0x1e20, azalia{}) + /* Haswell */ + RegisterPCI(0x8086, 0x0c0c, azalia{}) + /* Lynx Point */ + RegisterPCI(0x8086, 0x8c20, azalia{}) + RegisterPCI(0x8086, 0x9c20, azalia{}) } diff --git a/util/autoport/haswell.go b/util/autoport/haswell.go new file mode 100644 index 0000000..d3c9d9f --- /dev/null +++ b/util/autoport/haswell.go @@ -0,0 +1,119 @@ +package main + +type haswellmc struct { + variant string +} + +func (i haswellmc) Scan(ctx Context, addr PCIDevData) { + inteltool := ctx.InfoSource.GetInteltool() + + /* FIXME:XX Move this somewhere else. */ + MainboardIncludes = append(MainboardIncludes, "drivers/intel/gma/int15.h") + MainboardEnable += (` /* FIXME: fix those values*/ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +`) + + DevTree = DevTreeNode{ + Chip: "northbridge/intel/haswell", + MissingParent: "northbridge", + Comment: "FIXME: check gfx.ndid and gfx.did", + Registers: map[string]string{ + "gpu_dp_b_hotplug": FormatInt32((inteltool.IGD[0xc4030] >> 2) & 7), + "gpu_dp_c_hotplug": FormatInt32((inteltool.IGD[0xc4030] >> 10) & 7), + "gpu_dp_d_hotplug": FormatInt32((inteltool.IGD[0xc4030] >> 18) & 7), + "gpu_panel_port_select": FormatInt32((inteltool.IGD[0xc7208] >> 30) & 3), + "gpu_panel_power_up_delay": FormatInt32((inteltool.IGD[0xc7208] >> 16) & 0x1fff), + "gpu_panel_power_backlight_on_delay": FormatInt32(inteltool.IGD[0xc7208] & 0x1fff), + "gpu_panel_power_down_delay": FormatInt32((inteltool.IGD[0xc720c] >> 16) & 0x1fff), + "gpu_panel_power_backlight_off_delay": FormatInt32(inteltool.IGD[0xc720c] & 0x1fff), + "gpu_panel_power_cycle_delay": FormatInt32(inteltool.IGD[0xc7210] & 0xff), + "gpu_cpu_backlight": FormatHex32(inteltool.IGD[0x48254]), + "gpu_pch_backlight": FormatHex32((inteltool.IGD[0xc8254] >> 16) * 0x10001), + "gpu_ddi_e_connected": FormatBool(((inteltool.IGD[0x64000] >> 4) & 1) == 0), + /* FIXME:XX hardcoded. */ + "gfx.ndid": "3", + "gfx.did": "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }", + }, + Children: []DevTreeNode{ + { + Chip: "cpu_cluster", + Dev: 0, + Children: []DevTreeNode{ + { + Chip: "cpu/intel/haswell", + Children: []DevTreeNode{ + { + Chip: "lapic", + Dev: 0, + }, + { + Chip: "lapic", + Dev: 0xacac, + Disabled: true, + }, + }, + Registers: map[string]string{ + /* FIXME:XX hardcoded. */ + "c1_acpower": "1", + "c2_acpower": "3", + "c3_acpower": "5", + "c1_battery": "1", + "c2_battery": "3", + "c3_battery": "5", + }, + }, + }, + }, + + { + Chip: "domain", + Dev: 0, + PCIController: true, + ChildPCIBus: 0, + PCISlots: []PCISlot{ + PCISlot{PCIAddr: PCIAddr{Dev: 0x0, Func: 0}, writeEmpty: true, additionalComment: "Host bridge"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1, Func: 0}, writeEmpty: true, additionalComment: "PCIe Bridge for discrete graphics"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x2, Func: 0}, writeEmpty: true, additionalComment: "Internal graphics"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x3, Func: 0}, writeEmpty: true, additionalComment: "Mini-HD audio"}, + }, + }, + }, + } + + PutPCIDev(addr, "Host bridge") + + /* FIXME:XX some configs are unsupported. */ + + KconfigBool["CPU_INTEL_HASWELL"] = true + KconfigBool["NORTHBRIDGE_INTEL_HASWELL"] = true + KconfigBool["INTEL_INT15"] = true + KconfigBool["HAVE_ACPI_TABLES"] = true + KconfigBool["HAVE_ACPI_RESUME"] = true + + KconfigInt["MAX_CPUS"] = 8 + + DSDTIncludes = append(DSDTIncludes, DSDTInclude{ + File: "cpu/intel/common/acpi/cpu.asl", + }) + + DSDTPCI0Includes = append(DSDTPCI0Includes, DSDTInclude{ + File: "northbridge/intel/haswell/acpi/haswell.asl", + }, DSDTInclude{ + File: "drivers/intel/gma/acpi/default_brightness_levels.asl", + }) +} + +func init() { + RegisterPCI(0x8086, 0x0c00, haswellmc{variant: "Desktop"}) + RegisterPCI(0x8086, 0x0c04, haswellmc{variant: "Mobile"}) + RegisterPCI(0x8086, 0x0a04, haswellmc{variant: "ULT"}) + RegisterPCI(0x8086, 0x0c08, haswellmc{variant: "Server"}) + for _, id := range []uint16{ + 0x0402, 0x0412, 0x0422, + 0x0406, 0x0416, 0x0426, + 0x0d16, 0x0d26, 0x0d36, + 0x0a06, 0x0a16, 0x0a26, + } { + RegisterPCI(0x8086, id, GenericVGA{GenericPCI{Comment: "VGA controller"}}) + } +} diff --git a/util/autoport/lynxpoint.go b/util/autoport/lynxpoint.go new file mode 100644 index 0000000..df20c3f --- /dev/null +++ b/util/autoport/lynxpoint.go @@ -0,0 +1,495 @@ +package main + +import ( + "fmt" + "os" +) + +type lynxpoint struct { + variant string + node *DevTreeNode +} + +func (b lynxpoint) writeGPIOSet(ctx Context, sb *os.File, + val uint32, set uint, partno int, constraint uint32) { + + max := uint(32) + if set == 3 { + max = 12 + } + + bits := [6][2]string{ + {"GPIO_MODE_NATIVE", "GPIO_MODE_GPIO"}, + {"GPIO_DIR_OUTPUT", "GPIO_DIR_INPUT"}, + {"GPIO_LEVEL_LOW", "GPIO_LEVEL_HIGH"}, + {"GPIO_RESET_PWROK", "GPIO_RESET_RSMRST"}, + {"GPIO_NO_INVERT", "GPIO_INVERT"}, + {"GPIO_NO_BLINK", "GPIO_BLINK"}, + } + + for i := uint(0); i < max; i++ { + if ((constraint>>i)&1 == 1) { + fmt.Fprintf(sb, " .gpio%d = %s,\n", + (set-1)*32+i, + bits[partno][(val>>i)&1]) + } + } +} + +func (b lynxpoint) GPIO(ctx Context, inteltool InteltoolData) { + var constraint uint32 + gpio := Create(ctx, "gpio.c") + defer gpio.Close() + + AddROMStageFile("gpio.c", "") + + Add_gpl(gpio) + gpio.WriteString("#include <southbridge/intel/common/gpio.h>\n\n") + + /* TODO: different in LP PCH */ + addresses := [3][6]int{ + {0x00, 0x04, 0x0c, 0x60, 0x2c, 0x18}, + {0x30, 0x34, 0x38, 0x64, -1, -1}, + {0x40, 0x44, 0x48, 0x68, -1, -1}, + } + + for set := 1; set <= 3; set++ { + for partno, part := range []string{"mode", "direction", "level", "reset", "invert", "blink"} { + addr := addresses[set-1][partno] + if addr < 0 { + continue + } + fmt.Fprintf(gpio, "static const struct pch_gpio_set%d pch_gpio_set%d_%s = {\n", + set, set, part) + + constraint = 0xffffffff + switch part { + case "direction": + /* Ignored on native mode */ + constraint = inteltool.GPIO[uint16(addresses[set-1][0])] + case "level": + /* Level doesn't matter for input */ + constraint = inteltool.GPIO[uint16(addresses[set-1][0])] + constraint &^= inteltool.GPIO[uint16(addresses[set-1][1])] + case "reset": + /* Only show reset */ + constraint = inteltool.GPIO[uint16(addresses[set-1][3])] + case "invert": + /* Only on input and only show inverted GPIO */ + constraint = inteltool.GPIO[uint16(addresses[set-1][0])] + constraint &= inteltool.GPIO[uint16(addresses[set-1][1])] + constraint &= inteltool.GPIO[uint16(addresses[set-1][4])] + case "blink": + /* Only on output and only show blinking GPIO */ + constraint = inteltool.GPIO[uint16(addresses[set-1][0])] + constraint &^= inteltool.GPIO[uint16(addresses[set-1][1])] + constraint &= inteltool.GPIO[uint16(addresses[set-1][5])] + } + b.writeGPIOSet(ctx, gpio, inteltool.GPIO[uint16(addr)], uint(set), partno, constraint) + gpio.WriteString("};\n\n") + } + } + + gpio.WriteString(`const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; +`) +} + +func (b lynxpoint) IsPCIeHotplug(ctx Context, port int) bool { + portDev, ok := PCIMap[PCIAddr{Bus: 0, Dev: 0x1c, Func: port}] + if !ok { + return false + } + return (portDev.ConfigDump[0xdb] & (1 << 6)) != 0 +} + +func (b lynxpoint) GetGPIOHeader() string { + return "southbridge/intel/lynxpoint/pch.h" +} + +func (b lynxpoint) EnableGPE(in int) { + b.node.Registers[fmt.Sprintf("gpi%d_routing", in)] = "2" +} + +func (b lynxpoint) EncodeGPE(in int) int { + return in + 0x10 +} + +func (b lynxpoint) DecodeGPE(in int) int { + return in - 0x10 +} + +func (b lynxpoint) NeedRouteGPIOManually() { + b.node.Comment += ", FIXME: set gpiX_routing for EC support" +} + +func (b lynxpoint) Scan(ctx Context, addr PCIDevData) { + + SouthBridge = &b + + inteltool := ctx.InfoSource.GetInteltool() + b.GPIO(ctx, inteltool) + + KconfigBool["SOUTHBRIDGE_INTEL_LYNXPOINT"] = true + if b.variant == "Lynx Point LP" { + KconfigBool["INTEL_LYNXPOINT_LP"] = true + } + KconfigBool["SERIRQ_CONTINUOUS_MODE"] = true + KconfigInt["USBDEBUG_HCD_INDEX"] = 2 + KconfigComment["USBDEBUG_HCD_INDEX"] = "FIXME: check this" + dmi := ctx.InfoSource.GetDMI() + if dmi.Vendor == "LENOVO" { + KconfigInt["DRAM_RESET_GATE_GPIO"] = 10 + } else { + KconfigInt["DRAM_RESET_GATE_GPIO"] = 60 + } + KconfigComment["DRAM_RESET_GATE_GPIO"] = "FIXME: check this" + + /* Not strictly speaking correct. These subsys/subvendor referer to PCI devices. + But most systems don't have any of those. But the config needs to be set + nevertheless. So set it to southbridge subsys/subvendor. */ + KconfigHex["MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID"] = uint32(GetLE16(addr.ConfigDump[0x2c:0x2e])) + KconfigHex["MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID"] = uint32(GetLE16(addr.ConfigDump[0x2e:0x30])) + + ich9GetFlashSize(ctx) + + DSDTDefines = append(DSDTDefines, + DSDTDefine{ + Key: "BRIGHTNESS_UP", + Value: "\\_SB.PCI0.GFX0.INCB", + }, + DSDTDefine{ + Key: "BRIGHTNESS_DOWN", + Value: "\\_SB.PCI0.GFX0.DECB", + }, + DSDTDefine{ + Key: "ACPI_VIDEO_DEVICE", + Value: "\\_SB.PCI0.GFX0", + }) + + /* SPI init */ + MainboardIncludes = append(MainboardIncludes, "southbridge/intel/lynxpoint/pch.h") + + cur := DevTreeNode{ + Chip: "southbridge/intel/lynxpoint", + Comment: "Intel Series 8 Lynx Point PCH", + + Registers: map[string]string{ + "pirqa_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x60]), + "pirqb_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x61]), + "pirqc_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x62]), + "pirqd_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x63]), + "pirqe_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x68]), + "pirqf_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x69]), + "pirqg_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x6a]), + "pirqh_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x6b]), + "sata_ahci": "1", + "gen1_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x84:0x88]), + "gen2_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x88:0x8c]), + "gen3_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x8c:0x90]), + "gen4_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x90:0x94]), + "sata_port_map": fmt.Sprintf("0x%x", PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 2}].ConfigDump[0x92]&0x3f), + }, + PCISlots: []PCISlot{ + PCISlot{PCIAddr: PCIAddr{Dev: 0x14, Func: 0}, writeEmpty: false, additionalComment: "USB 3.0 Controller"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 0}, writeEmpty: true, additionalComment: "Management Engine Interface 1"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 1}, writeEmpty: true, additionalComment: "Management Engine Interface 2"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 2}, writeEmpty: true, additionalComment: "Management Engine IDE-R"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 3}, writeEmpty: true, additionalComment: "Management Engine KT"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x19, Func: 0}, writeEmpty: true, additionalComment: "Intel Gigabit Ethernet"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1a, Func: 0}, writeEmpty: true, additionalComment: "USB2 EHCI #2"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1b, Func: 0}, writeEmpty: true, additionalComment: "High Definition Audio"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 0}, writeEmpty: true, additionalComment: "PCIe Port #1"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 1}, writeEmpty: true, additionalComment: "PCIe Port #2"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 2}, writeEmpty: true, additionalComment: "PCIe Port #3"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 3}, writeEmpty: true, additionalComment: "PCIe Port #4"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 4}, writeEmpty: true, additionalComment: "PCIe Port #5"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 5}, writeEmpty: true, additionalComment: "PCIe Port #6"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 6}, writeEmpty: true, additionalComment: "PCIe Port #7"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 7}, writeEmpty: true, additionalComment: "PCIe Port #8"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1d, Func: 0}, writeEmpty: true, additionalComment: "USB2 EHCI #1"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1e, Func: 0}, writeEmpty: true, additionalComment: "PCI bridge"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 0}, writeEmpty: true, additionalComment: "LPC bridge"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 2}, writeEmpty: true, additionalComment: "SATA Controller 1"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 3}, writeEmpty: true, additionalComment: "SMBus"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 5}, writeEmpty: true, additionalComment: "SATA Controller 2"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 6}, writeEmpty: true, additionalComment: "Thermal"}, + }, + } + + b.node = &cur + + PutPCIChip(addr, cur) + PutPCIDevParent(addr, "PCI-LPC bridge", "lpc") + + DSDTIncludes = append(DSDTIncludes, DSDTInclude{ + File: "southbridge/intel/lynxpoint/acpi/platform.asl", + }) + DSDTIncludes = append(DSDTIncludes, DSDTInclude{ + File: "southbridge/intel/lynxpoint/acpi/globalnvs.asl", + Comment: "global NVS and variables", + }) + DSDTIncludes = append(DSDTIncludes, DSDTInclude{ + File: "southbridge/intel/lynxpoint/acpi/sleepstates.asl", + }) + DSDTPCI0Includes = append(DSDTPCI0Includes, DSDTInclude{ + File: "southbridge/intel/lynxpoint/acpi/pch.asl", + }) + + sb := Create(ctx, "romstage.c") + defer sb.Close() + Add_gpl(sb) + sb.WriteString(`#include <stdint.h> +#include <cpu/intel/romstage.h> +#include <cpu/intel/haswell/haswell.h> +#include <northbridge/intel/haswell/haswell.h> +#include <northbridge/intel/haswell/pei_data.h> +#include <southbridge/intel/common/gpio.h> +#include <southbridge/intel/lynxpoint/pch.h> + +static const struct rcba_config_instruction rcba_config[] = { +`) + RestoreDIRRoute(sb, "D31IR", uint16(inteltool.RCBA[0x3140])) + RestoreDIRRoute(sb, "D29IR", uint16(inteltool.RCBA[0x3144])) + RestoreDIRRoute(sb, "D28IR", uint16(inteltool.RCBA[0x3146])) + RestoreDIRRoute(sb, "D27IR", uint16(inteltool.RCBA[0x3148])) + RestoreDIRRoute(sb, "D26IR", uint16(inteltool.RCBA[0x314c])) + RestoreDIRRoute(sb, "D25IR", uint16(inteltool.RCBA[0x3150])) + RestoreDIRRoute(sb, "D22IR", uint16(inteltool.RCBA[0x315c])) + RestoreDIRRoute(sb, "D20IR", uint16(inteltool.RCBA[0x3160])) + + sb.WriteString(` + RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS), + + RCBA_END_CONFIG, +};`) + + sb.WriteString(` + +void mainboard_config_superio(void) +{ +} + +void mainboard_romstage_entry(unsigned long bist) +{ + struct pei_data pei_data = { + .pei_version = PEI_VERSION, + .mchbar = (uintptr_t)DEFAULT_MCHBAR, + .dmibar = (uintptr_t)DEFAULT_DMIBAR, + .epbar = DEFAULT_EPBAR, + .pciexbar = DEFAULT_PCIEXBAR, + .smbusbar = SMBUS_IO_BASE, + .wdbbar = 0x4000000, + .wdbsize = 0x1000, + .hpet_address = HPET_ADDR, + .rcba = (uintptr_t)DEFAULT_RCBA, + .pmbase = DEFAULT_PMBASE, + .gpiobase = DEFAULT_GPIOBASE, + .temp_mmio_base = 0xfed08000, + .system_type = 1, /* desktop/server, FIXME: check this */ + .tseg_size = CONFIG_SMM_TSEG_SIZE, + .spd_addresses = { 0xa0, 0xa2, 0xa4, 0xa6 }, /* FIXME: check this */ + .ec_present = 0, + .dimm_channel0_disabled = 0, /* FIXME: leave channel 0 enabled */ + .dimm_channel1_disabled = 0, /* FIXME: leave channel 1 enabled */ + .max_ddr3_freq = 1600, + .usb2_ports = { + /* Length, Enable, OCn#, Location */ +`) + + pdo1 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1d, Func: 0}].ConfigDump[0x64] + ocmap1 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1d, Func: 0}].ConfigDump[0x74:0x78] + pdo2 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1a, Func: 0}].ConfigDump[0x64] + ocmap2 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1a, Func: 0}].ConfigDump[0x74:0x78] + + for port := uint(0); port < 14; port++ { + var port_oc int = -1 + var port_pos string + var port_disable uint8 + + if port < 8 { + port_disable = (pdo1 >> port) & 1 + for oc := 0; oc < 4; oc++ { + if ((ocmap1[oc] & (1 << port)) != 0) { + port_oc = oc + break + } + } + } else { + port_disable = (pdo2 >> (port - 8)) & 1 + for oc := 0; oc < 4; oc++ { + if ((ocmap2[oc] & (1 << (port - 8))) != 0) { + port_oc = oc + 4 + break + } + } + } + if port_disable == 1 { + port_pos = "USB_PORT_SKIP" + } else { + port_pos = "USB_PORT_BACK_PANEL" + } + if port_oc == -1 { + fmt.Fprintf(sb, " { 0x0040, %d, USB_OC_PIN_SKIP, %s },\n", + (port_disable ^ 1), port_pos) + } else { + fmt.Fprintf(sb, " { 0x0040, %d, %d, %s },\n", + (port_disable ^ 1), port_oc, port_pos) + } + } + + sb.WriteString(` }, + .usb3_ports = { +`) + + xpdo := PCIMap[PCIAddr{Bus: 0, Dev: 0x14, Func: 0}].ConfigDump[0xe8] + u3ocm := PCIMap[PCIAddr{Bus: 0, Dev: 0x14, Func: 0}].ConfigDump[0xc8:0xd0] + + for port := uint(0); port < 6; port++ { + var port_oc int = -1 + port_disable := (xpdo >> port) & 1 + for oc := 0; oc < 8; oc++ { + if (u3ocm[oc] & (1 << port)) != 0 { + port_oc = oc + break + } + } + if port_oc == -1 { + fmt.Fprintf(sb, " { %d, USB_OC_PIN_SKIP },\n", + (port_disable ^ 1)) + } else { + fmt.Fprintf(sb, " { %d, %d },\n", + (port_disable ^ 1), port_oc) + } + } + + sb.WriteString(` }, + }; + + struct romstage_params romstage_params = { + .pei_data = &pei_data, + .gpio_map = &mainboard_gpio_map, + .rcba_config = &rcba_config[0], + .bist = bist, + }; + + romstage_common(&romstage_params); +}`) + + gnvs := Create(ctx, "acpi_tables.c") + defer gnvs.Close() + + Add_gpl(gnvs) + gnvs.WriteString(`#include <southbridge/intel/lynxpoint/nvs.h> + +/* FIXME: check this function. */ +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + // the lid is open by default. + gnvs->lids = 1; + + gnvs->tcrt = 100; + gnvs->tpsv = 90; +} +`) + +} + +func init() { + for _, id := range []uint16 { + 0x8c41, 0x8c49, 0x8c4b, 0x8c4f, + } { + RegisterPCI(0x8086, uint16(id), lynxpoint{variant: "Lynx Point Mobile"}) + } + + for _, id := range []uint16 { + 0x8c42, 0x8c44, 0x8c46, 0x8c4a, + 0x8c4c, 0x8c4e, 0x8c50, 0x8c5c, + } { + RegisterPCI(0x8086, uint16(id), lynxpoint{variant: "Lynx Point Desktop"}) + } + + for _, id := range []uint16 { + 0x8c52, 0x8c54, 0x8c56, + } { + RegisterPCI(0x8086, uint16(id), lynxpoint{variant: "Lynx Point Server"}) + } + + for _, id := range []uint16 { + 0x9c41, 0x9c43, 0x9c45, + } { + RegisterPCI(0x8086, uint16(id), lynxpoint{variant: "Lynx Point LP"}) + } + + /* PCIe bridge */ + for _, id := range []uint16{ + 0x8c10, 0x8c12, 0x8c14, 0x8c16, 0x8c18, 0x8c1a, 0x8c1c, 0x8c1e, + 0x9c10, 0x9c12, 0x9c14, 0x9c16, 0x9c18, 0x9c1a, + } { + RegisterPCI(0x8086, id, GenericPCI{}) + } + + /* SMBus controller */ + RegisterPCI(0x8086, 0x1c22, GenericPCI{MissingParent: "smbus"}) + RegisterPCI(0x8086, 0x1e22, GenericPCI{MissingParent: "smbus"}) + RegisterPCI(0x8086, 0x8c22, GenericPCI{MissingParent: "smbus"}) + RegisterPCI(0x8086, 0x9c22, GenericPCI{MissingParent: "smbus"}) + + /* SATA */ + for _, id := range []uint16{ + 0x8c00, 0x8c02, 0x8c04, 0x8c06, 0x8c08, 0x8c0e, + 0x8c01, 0x8c03, 0x8c05, 0x8c07, 0x8c09, 0x8c0f, + 0x9c03, 0x9c05, 0x9c07, 0x9c0f, + } { + RegisterPCI(0x8086, id, GenericPCI{}) + } + + /* EHCI */ + for _, id := range []uint16{ + 0x9c26, 0x8c26, 0x8c2d, + } { + RegisterPCI(0x8086, id, GenericPCI{}) + } + + /* XHCI */ + RegisterPCI(0x8086, 0x8c31, GenericPCI{}) + RegisterPCI(0x8086, 0x9c31, GenericPCI{}) + + /* ME and children */ + for _, id := range []uint16{ + 0x8c3a, 0x8c3b, + } { + RegisterPCI(0x8086, id, GenericPCI{}) + } + + /* Ethernet */ + RegisterPCI(0x8086, 0x8c33, GenericPCI{}) +} diff --git a/util/autoport/main.go b/util/autoport/main.go index 05a829b..c1920a7 100644 --- a/util/autoport/main.go +++ b/util/autoport/main.go @@ -236,6 +236,12 @@ pcidev.ConfigDump[addr]) } +func RestoreDIRRoute(f *os.File, regname string, val uint16) { + fmt.Fprintf(f, " RCBA_SET_REG_16(%s, DIR_ROUTE(PIRQ%c, PIRQ%c, PIRQ%c, PIRQ%c)),\n", + regname, 'A' + (val & 7), 'A' + ((val >> 4) & 7), + 'A' + ((val >> 8) & 7), 'A' + ((val >> 12) & 7)) +} + func RestorePCI32Simple(f *os.File, pcidev PCIDevData, addr uint16) { fmt.Fprintf(f, " pci_write_config32(PCI_DEV(%d, 0x%02x, %d), 0x%02x, 0x%02x%02x%02x%02x);\n", pcidev.Bus, pcidev.Dev, pcidev.Func, addr, -- To view, visit https://review.coreboot.org/c/coreboot/+/30890 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4f6e8c97b5122101de2f36bba8ba9f8ddd5b813a Gerrit-Change-Number: 30890 Gerrit-PatchSet: 1 Gerrit-Owner: Iru Cai (vimacs) <mytbk920423(a)gmail.com> Gerrit-Reviewer: Iru Cai <mytbk920423(a)gmail.com> Gerrit-MessageType: newchange

14 77

Change in coreboot[master]: WIP: riscv/mb/qemu: fix DRAM probing
by Philipp Hug (Code Review) 05 Mar '24

05 Mar '24

Philipp Hug has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36486 ) Change subject: WIP: riscv/mb/qemu: fix DRAM probing ...................................................................... WIP: riscv/mb/qemu: fix DRAM probing Current version of qemu raise an exception when accessing invalid memory. Modify the probing code to temporary redirect the exception handler like on ARM platform. TEST=qemu detects RAM size correctly Change-Id: I25860f688c7546714f6fdbce8c8f96da6400813c Signed-off-by: Philipp Hug <philipp(a)hug.cx> --- M src/arch/riscv/Makefile.inc M src/arch/riscv/include/arch/exception.h A src/arch/riscv/ramdetect.c M src/arch/riscv/trap_handler.c M src/arch/riscv/trap_util.S M src/lib/ramdetect.c 6 files changed, 57 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/86/36486/1 diff --git a/src/arch/riscv/Makefile.inc b/src/arch/riscv/Makefile.inc index 0039fab..7465a8f 100644 --- a/src/arch/riscv/Makefile.inc +++ b/src/arch/riscv/Makefile.inc @@ -101,6 +101,7 @@ romstage-y += stages.c romstage-y += misc.c romstage-$(ARCH_RISCV_PMP) += pmp.c +romstage-y += ramdetect.c romstage-y += smp.c romstage-y += \ $(top)/src/lib/memchr.c \ @@ -142,6 +143,7 @@ ramstage-y += virtual_memory.c ramstage-y += stages.c ramstage-y += misc.c +ramstage-y += ramdetect.c ramstage-y += smp.c ramstage-y += boot.c ramstage-y += tables.c diff --git a/src/arch/riscv/include/arch/exception.h b/src/arch/riscv/include/arch/exception.h index 6fbbdf0..cdca582 100644 --- a/src/arch/riscv/include/arch/exception.h +++ b/src/arch/riscv/include/arch/exception.h @@ -53,7 +53,7 @@ } void redirect_trap(void); -void trap_handler(trapframe *tf); +void default_trap_handler(trapframe *tf); void handle_supervisor_call(trapframe *tf); void handle_misaligned(trapframe *tf); diff --git a/src/arch/riscv/ramdetect.c b/src/arch/riscv/ramdetect.c new file mode 100644 index 0000000..47153ab --- /dev/null +++ b/src/arch/riscv/ramdetect.c @@ -0,0 +1,46 @@ +/* + * This file is part of the coreboot project. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include <arch/exception.h> +#include <types.h> +#include <console/console.h> +#include <device/mmio.h> +#include <ramdetect.h> +#include <arch/smp/spinlock.h> + +static enum { + ABORT_CHECKER_NOT_TRIGGERED, + ABORT_CHECKER_TRIGGERED, +} abort_state = ABORT_CHECKER_NOT_TRIGGERED; + +extern void(*trap_handler)(trapframe *tf); + +#define insn_size 4 +static void ramcheck_trap_handler(trapframe *tf) +{ + printk(BIOS_DEBUG, "TRAP 0x%lx!!!\n", tf->epc); + abort_state = ABORT_CHECKER_TRIGGERED; + + /* + * skip read instruction. + * currenctly hardcoded to 32bit instruction size + */ + write_csr(mepc, read_csr(mepc) + insn_size); +} + +int probe_mb(const uintptr_t dram_start, const uintptr_t size) +{ + uintptr_t addr = dram_start + (size * MiB) - sizeof(uint32_t); + void *ptr = (void *)addr; + + abort_state = ABORT_CHECKER_NOT_TRIGGERED; + trap_handler = ramcheck_trap_handler; + barrier(); + read32(ptr); + trap_handler = default_trap_handler; + barrier(); + return abort_state == ABORT_CHECKER_NOT_TRIGGERED; +} diff --git a/src/arch/riscv/trap_handler.c b/src/arch/riscv/trap_handler.c index 6b39fab..1d51268 100644 --- a/src/arch/riscv/trap_handler.c +++ b/src/arch/riscv/trap_handler.c @@ -118,7 +118,10 @@ break; } } -void trap_handler(trapframe *tf) + +void(*trap_handler)(trapframe *tf) = default_trap_handler; + +void default_trap_handler(trapframe *tf) { write_csr(mscratch, tf); if (tf->cause & 0x8000000000000000ULL) { diff --git a/src/arch/riscv/trap_util.S b/src/arch/riscv/trap_util.S index 67e917c..93f5afd 100644 --- a/src/arch/riscv/trap_util.S +++ b/src/arch/riscv/trap_util.S @@ -120,7 +120,8 @@ save_tf mv a0, sp - jal trap_handler + ld t0, trap_handler + jalr t0 restore_regs addi sp, sp, MENTRY_FRAME_SIZE diff --git a/src/lib/ramdetect.c b/src/lib/ramdetect.c index 2c83092..eaf6190 100644 --- a/src/lib/ramdetect.c +++ b/src/lib/ramdetect.c @@ -58,6 +58,8 @@ if (saved_result) return saved_result; + printk(BIOS_DEBUG, "RAMDETECT: Starting\n"); + /* Find the MSB + 1. */ size_t tmp = probe_size; do { -- To view, visit https://review.coreboot.org/c/coreboot/+/36486 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I25860f688c7546714f6fdbce8c8f96da6400813c Gerrit-Change-Number: 36486 Gerrit-PatchSet: 1 Gerrit-Owner: Philipp Hug <philipp(a)hug.cx> Gerrit-MessageType: newchange

8 36

Change in coreboot[master]: [TEST] Add support for link time optimization
by Jacob Garber (Code Review) 22 Feb '24

22 Feb '24

Jacob Garber has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/38989 ) Change subject: [TEST] Add support for link time optimization ...................................................................... [TEST] Add support for link time optimization - Code generation is not done until after linking, so the compiler must be invoked at all linking stages instead of the linker. As a consequence all linker arguments must be prefixed with -Wl. - Partial linking is not supported. Instead, object files are collected into thin archives that are linked instead. - The dead_code() macro causes linking errors, since dead functions aren't optimized out until after linking has begun. This macro could be replaced with the preprocessor if necessary, or just disabled for LTO builds. - Wrapping libgcc functions causes a symbol mismatch when using LTO. Wrapping these functions was originally done to support alternate regparam values, though AFAICT this isn't used anywhere. Using LTO leads to a ~10% decrease in stage size for QEMU and ~18% for the Thinkpad T500, and both targets boot successfully. Change-Id: I48c31ea8b1b57276125cffdac44c7c16642547ac Signed-off-by: Jacob Garber <jgarber1(a)ualberta.ca> --- M Makefile.inc M src/Kconfig M src/arch/x86/Makefile.inc M src/cpu/x86/smm/Makefile.inc M src/include/assert.h M src/lib/Makefile.inc M src/lib/gcc.c M toolchain.inc M util/xcompile/xcompile 9 files changed, 42 insertions(+), 24 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/89/38989/1 diff --git a/Makefile.inc b/Makefile.inc index 1f18726..b85c11b 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -434,6 +434,10 @@ endif endif +ifeq ($(CONFIG_LTO),y) +CFLAGS_common += -flto -fuse-linker-plugin -fno-fat-lto-objects +endif + ADAFLAGS_common += -gnatp ADAFLAGS_common += -Wuninitialized -Wall -Werror ADAFLAGS_common += -pipe -g -nostdinc @@ -478,7 +482,7 @@ # Disable style checks for now ADAFLAGS_common += -gnatyN -LDFLAGS_common := --gc-sections -nostdlib -nostartfiles -static --emit-relocs +LDFLAGS_common := -nostdlib -nostartfiles -static -Wl,--emit-relocs,--gc-sections ifeq ($(CONFIG_WARNINGS_ARE_ERRORS),y) CFLAGS_common += -Werror diff --git a/src/Kconfig b/src/Kconfig index f75f942..4b81818 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -116,6 +116,15 @@ For details see https://ccache.samba.org. +config LTO + bool "Use link time optimization" + # Enable now for testing + default y + depends on COMPILER_GCC + help + Compile with link time optimization. This can often decrease the + final binary size, but may increase compilation time. + config FMD_GENPARSER bool "Generate flashmap descriptor parser using flex and bison" default n diff --git a/src/arch/x86/Makefile.inc b/src/arch/x86/Makefile.inc index 534f2ce..75f96d2 100644 --- a/src/arch/x86/Makefile.inc +++ b/src/arch/x86/Makefile.inc @@ -80,7 +80,7 @@ $$(objcbfs)/$(1).debug: $$$$($(1)-libs) $$$$($(1)-objs) @printf " LINK $$(subst $$(obj)/,,$$(@))\n" - $$(LD_$(1)) $$(LDFLAGS_$(1)) -o $$@ -L$$(obj) $$(COMPILER_RT_FLAGS_$(1)) --whole-archive --start-group $$(filter-out %.ld,$$($(1)-objs)) $$($(1)-libs) --no-whole-archive $$(COMPILER_RT_$(1)) --end-group -T $(call src-to-obj,$(1),$(dir)/memlayout.ld) --oformat $(2) + $$(LD_$(1)) $$(LDFLAGS_$(1)) -o $$@ -L$$(obj) $$(COMPILER_RT_FLAGS_$(1)) -Wl,--whole-archive,--start-group $$(filter-out %.ld,$$($(1)-objs)) $$($(1)-libs) -Wl,--no-whole-archive $$(COMPILER_RT_$(1)) -Wl,--end-group -T $(call src-to-obj,$(1),$(dir)/memlayout.ld) -Wl,--oformat=$(2) -LANG=C LC_ALL= $$(OBJCOPY_$(1)) --only-section .illegal_globals $$(@) $$(objcbfs)/$(1)_null.offenders >/dev/null 2>&1 if [ -z "$$$$($$(NM_$(1)) $$(objcbfs)/$(1)_null.offenders 2>&1 | grep 'no symbols')" ];then \ echo "Forbidden global variables in $(1):"; \ @@ -212,11 +212,11 @@ postcar-y += postcar.c postcar-$(CONFIG_COLLECT_TIMESTAMPS_TSC) += timestamp.c -LDFLAGS_postcar += -Map $(objcbfs)/postcar.map +LDFLAGS_postcar += -Wl,-Map,$(objcbfs)/postcar.map $(objcbfs)/postcar.debug: $$(postcar-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_postcar) $(LDFLAGS_postcar) -o $@ -L$(obj) $(COMPILER_RT_FLAGS_postcar) --whole-archive --start-group $(filter-out %.ld,$^) --no-whole-archive $(COMPILER_RT_postcar) --end-group -T $(call src-to-obj,postcar,src/arch/x86/memlayout.ld) + $(LD_postcar) $(LDFLAGS_postcar) -o $@ -L$(obj) $(COMPILER_RT_FLAGS_postcar) -Wl,--whole-archive,--start-group $(filter-out %.ld,$^) -Wl,--no-whole-archive $(COMPILER_RT_postcar) -Wl,--end-group -T $(call src-to-obj,postcar,src/arch/x86/memlayout.ld) $(objcbfs)/postcar.elf: $(objcbfs)/postcar.debug.rmod cp $< $@ @@ -309,18 +309,20 @@ endif -$(objcbfs)/ramstage.debug: $(objgenerated)/ramstage.o $(call src-to-obj,ramstage,src/arch/x86/memlayout.ld) - @printf " CC $(subst $(obj)/,,$(@))\n" - $(LD_ramstage) $(CPPFLAGS) $(LDFLAGS_ramstage) -o $@ -L$(obj) $< -T $(call src-to-obj,ramstage,src/arch/x86/memlayout.ld) - -$(objgenerated)/ramstage.o: $$(ramstage-objs) $(COMPILER_RT_ramstage) $$(ramstage-libs) - @printf " CC $(subst $(obj)/,,$(@))\n" ifeq ($(CONFIG_ARCH_RAMSTAGE_X86_32),y) - $(LD_ramstage) -m elf_i386 -r -o $@ $(COMPILER_RT_FLAGS_ramstage) --whole-archive --start-group $(filter-out %.ld,$(ramstage-objs)) $(ramstage-libs) --no-whole-archive $(COMPILER_RT_ramstage) --end-group +LDFLAGS_ramstage += -Wl,-m,elf_i386 else - $(LD_ramstage) -m elf_x86_64 -r -o $@ $(COMPILER_RT_FLAGS_ramstage) --whole-archive --start-group $(filter-out %.ld,$(ramstage-objs)) $(ramstage-libs) --no-whole-archive $(COMPILER_RT_ramstage) --end-group +LDFLAGS_ramstage += -Wl,-m,elf_x86_64 endif +$(objcbfs)/ramstage.debug: $(objgenerated)/ramstage.a $(call src-to-obj,ramstage,src/arch/x86/memlayout.ld) + @printf " CC $(subst $(obj)/,,$(@))\n" + $(LD_ramstage) $(CPPFLAGS) $(LDFLAGS_ramstage) $(COMPILER_RT_FLAGS_ramstage) -o $@ -L$(obj) -Wl,--whole-archive,--start-group $< -Wl,--no-whole-archive $(COMPILER_RT_ramstage) -Wl,--end-group -T $(call src-to-obj,ramstage,src/arch/x86/memlayout.ld) + +$(objgenerated)/ramstage.a: $$(ramstage-objs) $$(ramstage-libs) + @printf " AR $(subst $(obj)/,,$(@))\n" + $(AR_ramstage) rcT $@ $(filter-out %.ld,$(ramstage-objs)) $(ramstage-libs) + endif # CONFIG_ARCH_RAMSTAGE_X86_32 / CONFIG_ARCH_RAMSTAGE_X86_64 smm-$(CONFIG_IDT_IN_EVERY_STAGE) += exception.c diff --git a/src/cpu/x86/smm/Makefile.inc b/src/cpu/x86/smm/Makefile.inc index 11a4e67..f582a31 100644 --- a/src/cpu/x86/smm/Makefile.inc +++ b/src/cpu/x86/smm/Makefile.inc @@ -25,8 +25,8 @@ smm-generic-ccopts += -D__SMM__ smm-c-deps:=$$(OPTION_TABLE_H) -$(obj)/smm/smm.o: $$(smm-objs) $(COMPILER_RT_smm) - $(LD_smm) -nostdlib -r -o $@ $(COMPILER_RT_FLAGS_smm) --whole-archive --start-group $(smm-objs) --no-whole-archive $(COMPILER_RT_smm) --end-group +$(obj)/smm/smm.a: $$(smm-objs) + $(AR_smm) rcT $@ $^ # change to the target path because objcopy will use the path name in its # ELF symbol names. @@ -53,7 +53,7 @@ # SMM Stub Module. The stub is used as a trampoline for relocation and normal # SMM handling. $(obj)/smmstub/smmstub.o: $$(smmstub-objs) $(COMPILER_RT_smmstub) - $(LD_smmstub) -nostdlib -r -o $@ $(COMPILER_RT_FLAGS_smmstub) --whole-archive --start-group $(smmstub-objs) --no-whole-archive $(COMPILER_RT_smmstub) --end-group + $(LD_smmstub) -nostdlib -r -o $@ $(COMPILER_RT_FLAGS_smmstub) -Wl,--whole-archive,--start-group $(smmstub-objs) -Wl,--no-whole-archive $(COMPILER_RT_smmstub) -Wl,--end-group # Link the SMM stub module with a 0-byte heap. ifeq ($(CONFIG_ARCH_RAMSTAGE_X86_32),y) @@ -72,9 +72,9 @@ # C-based SMM handler. ifeq ($(CONFIG_ARCH_RAMSTAGE_X86_32),y) -$(eval $(call rmodule_link,$(obj)/smm/smm.elf, $(obj)/smm/smm.o, $(CONFIG_SMM_MODULE_HEAP_SIZE),x86_32)) +$(eval $(call rmodule_link,$(obj)/smm/smm.elf, $(obj)/smm/smm.a, $(CONFIG_SMM_MODULE_HEAP_SIZE),x86_32)) else -$(eval $(call rmodule_link,$(obj)/smm/smm.elf, $(obj)/smm/smm.o, $(CONFIG_SMM_MODULE_HEAP_SIZE),x86_64)) +$(eval $(call rmodule_link,$(obj)/smm/smm.elf, $(obj)/smm/smm.a, $(CONFIG_SMM_MODULE_HEAP_SIZE),x86_64)) endif $(obj)/smm/smm: $(obj)/smm/smm.elf.rmod @@ -82,8 +82,8 @@ else # CONFIG_SMM_TSEG -$(obj)/smm/smm: $(obj)/smm/smm.o $(src)/cpu/x86/smm/smm.ld - $(LD_smm) $(LDFLAGS_smm) -o $(obj)/smm/smm.elf -T $(src)/cpu/x86/smm/smm.ld $(obj)/smm/smm.o +$(obj)/smm/smm: $(obj)/smm/smm.a $(src)/cpu/x86/smm/smm.ld + $(LD_smm) $(LDFLAGS_smm) -o $(obj)/smm/smm.elf -T $(src)/cpu/x86/smm/smm.ld -Wl,--whole-archive,--start-group $(obj)/smm/smm.a -Wl,--no-whole-archive $(COMPILER_RT_smm) --end-group $(NM_smm) -n $(obj)/smm/smm.elf | sort > $(obj)/smm/smm.map $(OBJCOPY_smm) -O binary $(obj)/smm/smm.elf $@ diff --git a/src/include/assert.h b/src/include/assert.h index e0db0bc..6901953 100644 --- a/src/include/assert.h +++ b/src/include/assert.h @@ -61,7 +61,8 @@ dead_code_assertion_failed_at_line_##line(); \ } while (0) #define _dead_code(line) __dead_code(line) -#define dead_code() _dead_code(__LINE__) +//#define dead_code() _dead_code(__LINE__) +#define dead_code() /* This can be used in the context of an expression of type 'type'. */ #define dead_code_t(type) ({ \ diff --git a/src/lib/Makefile.inc b/src/lib/Makefile.inc index 2333f64..ac6d624 100644 --- a/src/lib/Makefile.inc +++ b/src/lib/Makefile.inc @@ -291,7 +291,7 @@ # rmdoule is named $(1).rmod define rmodule_link $(strip $(1)): $(strip $(2)) $$(COMPILER_RT_rmodules_$(4)) $(call src-to-obj,rmodules_$(4),src/lib/rmodule.ld) | $$(RMODTOOL) - $$(LD_rmodules_$(4)) $$(LDFLAGS_rmodules_$(4)) $(RMODULE_LDFLAGS) -T $(call src-to-obj,rmodules_$(4),src/lib/rmodule.ld) --defsym=__heap_size=$(strip $(3)) -o $$@ --whole-archive --start-group $(filter-out %.ld,$(2)) --end-group + $$(LD_rmodules_$(4)) $$(LDFLAGS_rmodules_$(4)) $(RMODULE_LDFLAGS) -T $(call src-to-obj,rmodules_$(4),src/lib/rmodule.ld) -Wl,--defsym=__heap_size=$(strip $(3)) -o $$@ -Wl,--whole-archive,--start-group $(filter-out %.ld,$(2)) -Wl,--no-whole-archive $$(COMPILER_RT_rmodules_$(4)) -Wl,--end-group $$(NM_rmodules_$(4)) -n $$@ > $$(basename $$(a)).map endef diff --git a/src/lib/gcc.c b/src/lib/gcc.c index 5a93f45..66a7788 100644 --- a/src/lib/gcc.c +++ b/src/lib/gcc.c @@ -24,6 +24,7 @@ /* TODO: maybe this code should move to arch/x86 as architecture * specific implementations may vary */ +#if 0 #define WRAP_LIBGCC_CALL(type, name) \ asmlinkage type __real_##name(type a, type b); \ type __wrap_##name(type a, type b); \ @@ -33,3 +34,4 @@ WRAP_LIBGCC_CALL(unsigned long long, __udivdi3) WRAP_LIBGCC_CALL(long long, __moddi3) WRAP_LIBGCC_CALL(unsigned long long, __umoddi3) +#endif diff --git a/toolchain.inc b/toolchain.inc index 865227b..f52a518 100644 --- a/toolchain.inc +++ b/toolchain.inc @@ -117,7 +117,7 @@ $(error Check your .config file for CONFIG_ARCH_$(1)_* settings)) CC_$(1) := $(CC_$(2)) GCC_$(1) := $(GCC_CC_$(2)) -LD_$(1) := $(LD_$(2)) +LD_$(1) := $(CC_$(2)) NM_$(1) := $(NM_$(2)) AR_$(1) := $(AR_$(2)) GNATBIND_$(1) := $(GNATBIND_$(2)) @@ -130,7 +130,7 @@ CPPFLAGS_$(1) = $$(CPPFLAGS_common) $$(CPPFLAGS_$(2)) -D__ARCH_$(2)__ COMPILER_RT_$(1) := $$(COMPILER_RT_$(2)) COMPILER_RT_FLAGS_$(1) := $$(COMPILER_RT_FLAGS_$(2)) -LDFLAGS_$(1) = $$(LDFLAGS_common) $$(LDFLAGS_$(2)) +LDFLAGS_$(1) = $$(CFLAGS_$(1)) $$(LDFLAGS_common) $$(LDFLAGS_$(2)) endef # define_class: Allows defining any program as dynamic class and compiler tool diff --git a/util/xcompile/xcompile b/util/xcompile/xcompile index 3203d71..8515813 100755 --- a/util/xcompile/xcompile +++ b/util/xcompile/xcompile @@ -363,7 +363,7 @@ TCLIST="i386 x86_64" TWIDTH="32" TABI="elf" - CC_RT_EXTRA_GCC="--wrap __divdi3 --wrap __udivdi3 --wrap __moddi3 --wrap __umoddi3" + #CC_RT_EXTRA_GCC="-Wl,--wrap=__divdi3,--wrap=__udivdi3,--wrap=__moddi3,--wrap=__umoddi3" } arch_config_ppc64() { -- To view, visit https://review.coreboot.org/c/coreboot/+/38989 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I48c31ea8b1b57276125cffdac44c7c16642547ac Gerrit-Change-Number: 38989 Gerrit-PatchSet: 1 Gerrit-Owner: Jacob Garber <jgarber1(a)ualberta.ca> Gerrit-Reviewer: Jacob Garber <jgarber1(a)ualberta.ca> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

9 34

Change in coreboot[master]: nb/amd/agesa: select ROMSTAGE_CACHED_CBMEM
by Arthur Heymans (Code Review) 20 Feb '24

20 Feb '24

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37198 ) Change subject: nb/amd/agesa: select ROMSTAGE_CACHED_CBMEM ...................................................................... nb/amd/agesa: select ROMSTAGE_CACHED_CBMEM AGESA sets up MTRR's to cache the whole dram, so decompressing postcar stage to cbmem should be fast and is now selected by default. Change-Id: I62ffe1bd646e9ddad77be240f030601790f4da4b Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/northbridge/amd/agesa/family14/Kconfig M src/northbridge/amd/agesa/family15tn/Kconfig M src/northbridge/amd/agesa/family16kb/Kconfig 3 files changed, 3 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/98/37198/1 diff --git a/src/northbridge/amd/agesa/family14/Kconfig b/src/northbridge/amd/agesa/family14/Kconfig index 173714f..cfafb23 100644 --- a/src/northbridge/amd/agesa/family14/Kconfig +++ b/src/northbridge/amd/agesa/family14/Kconfig @@ -14,6 +14,7 @@ ## config NORTHBRIDGE_AMD_AGESA_FAMILY14 bool + select ROMSTAGE_CACHED_CBMEM if NORTHBRIDGE_AMD_AGESA_FAMILY14 diff --git a/src/northbridge/amd/agesa/family15tn/Kconfig b/src/northbridge/amd/agesa/family15tn/Kconfig index a0841eb..e6a469f 100644 --- a/src/northbridge/amd/agesa/family15tn/Kconfig +++ b/src/northbridge/amd/agesa/family15tn/Kconfig @@ -14,6 +14,7 @@ ## config NORTHBRIDGE_AMD_AGESA_FAMILY15_TN bool + select ROMSTAGE_CACHED_CBMEM if NORTHBRIDGE_AMD_AGESA_FAMILY15_TN diff --git a/src/northbridge/amd/agesa/family16kb/Kconfig b/src/northbridge/amd/agesa/family16kb/Kconfig index 2be2fd3..e34ef60 100644 --- a/src/northbridge/amd/agesa/family16kb/Kconfig +++ b/src/northbridge/amd/agesa/family16kb/Kconfig @@ -15,6 +15,7 @@ ## config NORTHBRIDGE_AMD_AGESA_FAMILY16_KB bool + select ROMSTAGE_CACHED_CBMEM if NORTHBRIDGE_AMD_AGESA_FAMILY16_KB -- To view, visit https://review.coreboot.org/c/coreboot/+/37198 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I62ffe1bd646e9ddad77be240f030601790f4da4b Gerrit-Change-Number: 37198 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

6 28

Change in coreboot[master]: mb/hp: Add Elitebook 8560w as an HP Sandy/Ivy Bridge laptop variant
by Iru Cai (vimacs) (Code Review) 10 Feb '24

10 Feb '24

Hello Iru Cai, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/39398 to review the following change. Change subject: mb/hp: Add Elitebook 8560w as an HP Sandy/Ivy Bridge laptop variant ...................................................................... mb/hp: Add Elitebook 8560w as an HP Sandy/Ivy Bridge laptop variant Change-Id: I15181792b1efa45a2a94d78e43c6257da1acf950 Signed-off-by: Iru Cai <mytbk920423(a)gmail.com> --- A Documentation/mainboard/hp/8560w.md A Documentation/mainboard/hp/8560w_flash.webp M Documentation/mainboard/index.md M src/mainboard/hp/snb_ivb_laptops/Kconfig M src/mainboard/hp/snb_ivb_laptops/Kconfig.name A src/mainboard/hp/snb_ivb_laptops/variants/8560w/board_info.txt A src/mainboard/hp/snb_ivb_laptops/variants/8560w/early_init.c A src/mainboard/hp/snb_ivb_laptops/variants/8560w/gpio.c A src/mainboard/hp/snb_ivb_laptops/variants/8560w/hda_verb.c A src/mainboard/hp/snb_ivb_laptops/variants/8560w/overridetree.cb 10 files changed, 477 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/98/39398/1 diff --git a/Documentation/mainboard/hp/8560w.md b/Documentation/mainboard/hp/8560w.md new file mode 100644 index 0000000..6a7c197 --- /dev/null +++ b/Documentation/mainboard/hp/8560w.md @@ -0,0 +1,82 @@ +# HP EliteBook 8560w + +This page describes how to run coreboot on the [HP EliteBook 8560w]. + +## Required proprietary blobs + +- Intel Firmware Descriptor, ME and GbE firmware +- EC: please read [EliteBook Series](elitebook_series) + +## Flashing instructions + +HP EliteBook 8560w has an 8MB SOIC-8 flash chip on the bottom of the +mainboard. You just need to remove the service cover, and use an SOIC-8 +clip to read and flash the chip. + +![8560w_chip_location](8560w_flash.webp) + +```eval_rst ++---------------------+------------+ +| Type | Value | ++=====================+============+ +| Socketed flash | no | ++---------------------+------------+ +| Model | MX25L6406E | ++---------------------+------------+ +| Size | 8 MiB | ++---------------------+------------+ +| Package | SOIC-8 | ++---------------------+------------+ +| Write protection | no | ++---------------------+------------+ +| Dual BIOS feature | no | ++---------------------+------------+ +| In circuit flashing | yes | ++---------------------+------------+ +| Internal flashing | yes | ++---------------------+------------+ +``` + +## Untested + +- mainboards with 4 memory slots + +## Working + +- i7-2720QM, 8G+8G +- Arch Linux boot from SeaBIOS payload +- EHCI debug: the port is beside the eSATA port +- SATA +- eSATA +- USB2 and USB3 +- keyboard +- Gigabit Ethernet +- WLAN +- WWAN +- VGA and DisplayPort +- audio +- EC ACPI +- Using `me_cleaner` +- dock: PS/2 keyboard, USB, DisplayPort +- TPM +- S3 suspend/resume + +## Technology + +```eval_rst ++------------------+--------------------------------------------------+ +| Northbridge | :doc:`../../northbridge/intel/sandybridge/index` | ++------------------+--------------------------------------------------+ +| Southbridge | bd82x6x | ++------------------+--------------------------------------------------+ +| CPU | model_206ax | ++------------------+--------------------------------------------------+ +| Super I/O | SMSC LPC47n217 | ++------------------+--------------------------------------------------+ +| EC | SMSC KBC1126 | ++------------------+--------------------------------------------------+ +| Coprocessor | Intel Management Engine | ++------------------+--------------------------------------------------+ +``` + +[HP EliteBook 8560w]: https://support.hp.com/us-en/product/hp-elitebook-8560w-mobile-workstation/… diff --git a/Documentation/mainboard/hp/8560w_flash.webp b/Documentation/mainboard/hp/8560w_flash.webp new file mode 100644 index 0000000..b8295bc --- /dev/null +++ b/Documentation/mainboard/hp/8560w_flash.webp Binary files differ diff --git a/Documentation/mainboard/index.md b/Documentation/mainboard/index.md index e46e0f3..a20a0bf 100644 --- a/Documentation/mainboard/index.md +++ b/Documentation/mainboard/index.md @@ -55,6 +55,7 @@ ### EliteBook series - [EliteBook common](hp/elitebook_series.md) +- [EliteBook 8560w](hp/8560w.md) - [EliteBook 8760w](hp/8760w.md) ## Intel diff --git a/src/mainboard/hp/snb_ivb_laptops/Kconfig b/src/mainboard/hp/snb_ivb_laptops/Kconfig index d0105ff..0ec0d27 100644 --- a/src/mainboard/hp/snb_ivb_laptops/Kconfig +++ b/src/mainboard/hp/snb_ivb_laptops/Kconfig @@ -37,6 +37,7 @@ default "2760p" if BOARD_HP_2760P default "8460p" if BOARD_HP_8460P default "8470p" if BOARD_HP_8470P + default "8560w" if BOARD_HP_8560W default "8770w" if BOARD_HP_8770W default "folio_9470m" if BOARD_HP_FOLIO_9470M default "revolve_810_g1" if BOARD_HP_REVOLVE_810_G1 @@ -47,6 +48,7 @@ default "EliteBook 2760p" if BOARD_HP_2760P default "EliteBook 8460p" if BOARD_HP_8460P default "EliteBook 8470p" if BOARD_HP_8470P + default "EliteBook 8560w" if BOARD_HP_8560W default "EliteBook 8770w" if BOARD_HP_8770W default "EliteBook Folio 9470m" if BOARD_HP_FOLIO_9470M default "EliteBook Revolve 810 G1" if BOARD_HP_REVOLVE_810_G1 @@ -75,6 +77,7 @@ default 1 if BOARD_HP_2760P default 1 if BOARD_HP_8460P default 2 if BOARD_HP_8470P + default 1 if BOARD_HP_8560W default 2 if BOARD_HP_8770W default 0 if BOARD_HP_FOLIO_9470M default 2 if BOARD_HP_REVOLVE_810_G1 # FIXME: check this diff --git a/src/mainboard/hp/snb_ivb_laptops/Kconfig.name b/src/mainboard/hp/snb_ivb_laptops/Kconfig.name index c4a8662..360373e 100644 --- a/src/mainboard/hp/snb_ivb_laptops/Kconfig.name +++ b/src/mainboard/hp/snb_ivb_laptops/Kconfig.name @@ -61,6 +61,17 @@ select SOUTHBRIDGE_INTEL_C216 select SUPERIO_SMSC_LPC47N217 +config BOARD_HP_8560W + bool "EliteBook 8560w" + + select BOARD_HP_SNB_IVB_LAPTOPS + select BOARD_ROMSIZE_KB_8192 + select MAINBOARD_USES_IFD_GBE_REGION + select SOUTHBRIDGE_INTEL_BD82X6X + select SUPERIO_SMSC_LPC47N217 + select MAINBOARD_HAS_LPC_TPM + select MAINBOARD_HAS_TPM1 + config BOARD_HP_8770W bool "EliteBook 8770w" diff --git a/src/mainboard/hp/snb_ivb_laptops/variants/8560w/board_info.txt b/src/mainboard/hp/snb_ivb_laptops/variants/8560w/board_info.txt new file mode 100644 index 0000000..af1e296 --- /dev/null +++ b/src/mainboard/hp/snb_ivb_laptops/variants/8560w/board_info.txt @@ -0,0 +1,7 @@ +Category: laptop +Board URL: https://support.hp.com/us-en/product/hp-elitebook-8560w-mobile-workstation/… +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: n +Release year: 2011 diff --git a/src/mainboard/hp/snb_ivb_laptops/variants/8560w/early_init.c b/src/mainboard/hp/snb_ivb_laptops/variants/8560w/early_init.c new file mode 100644 index 0000000..57eafe2 --- /dev/null +++ b/src/mainboard/hp/snb_ivb_laptops/variants/8560w/early_init.c @@ -0,0 +1,52 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2020 The coreboot project Authors. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include <bootblock_common.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <northbridge/intel/sandybridge/raminit_native.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <superio/smsc/lpc47n217/lpc47n217.h> +#include <ec/hp/kbc1126/ec.h> + +#define SERIAL_DEV PNP_DEV(0x4e, LPC47N217_SP1) + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 1, 0 }, /* USB0 */ + { 1, 1, 0 }, /* USB1 */ + { 1, 1, 1 }, /* eSATA */ + { 1, 1, 1 }, /* camera */ + { 0, 0, 2 }, + { 1, 0, 2 }, /* bluetooth */ + { 0, 0, 3 }, + { 1, 0, 3 }, + { 0, 1, 4 }, + { 1, 1, 4 }, /* WWAN */ + { 1, 0, 5 }, + { 1, 0, 5 }, /* dock */ + { 1, 0, 6 }, + { 1, 0, 6 }, +}; + +void bootblock_mainboard_early_init(void) +{ + lpc47n217_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + kbc1126_enter_conf(); + kbc1126_mailbox_init(); + kbc1126_kbc_init(); + kbc1126_ec_init(); + kbc1126_pm1_init(); + kbc1126_exit_conf(); +} + +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + read_spd(&spd[0], 0x50, id_only); + read_spd(&spd[1], 0x51, id_only); + read_spd(&spd[2], 0x52, id_only); + read_spd(&spd[3], 0x53, id_only); +} diff --git a/src/mainboard/hp/snb_ivb_laptops/variants/8560w/gpio.c b/src/mainboard/hp/snb_ivb_laptops/variants/8560w/gpio.c new file mode 100644 index 0000000..29358aa --- /dev/null +++ b/src/mainboard/hp/snb_ivb_laptops/variants/8560w/gpio.c @@ -0,0 +1,230 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2020 The coreboot project Authors. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_NATIVE, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_GPIO, + .gpio11 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_NATIVE, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_OUTPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio11 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_OUTPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio23 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio0 = GPIO_LEVEL_LOW, + .gpio11 = GPIO_LEVEL_LOW, + .gpio17 = GPIO_LEVEL_HIGH, + .gpio22 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_HIGH, + .gpio27 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio24 = GPIO_RESET_RSMRST, + .gpio30 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio3 = GPIO_INVERT, + .gpio6 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio10 = GPIO_INVERT, + .gpio13 = GPIO_INVERT, + .gpio14 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_NATIVE, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_GPIO, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_GPIO, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_GPIO, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_GPIO, + .gpio55 = GPIO_MODE_GPIO, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_GPIO, + .gpio61 = GPIO_MODE_GPIO, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio37 = GPIO_DIR_OUTPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio44 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_OUTPUT, + .gpio50 = GPIO_DIR_INPUT, + .gpio51 = GPIO_DIR_INPUT, + .gpio52 = GPIO_DIR_INPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_INPUT, + .gpio55 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_OUTPUT, + .gpio60 = GPIO_DIR_OUTPUT, + .gpio61 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio33 = GPIO_LEVEL_LOW, + .gpio35 = GPIO_LEVEL_LOW, + .gpio37 = GPIO_LEVEL_LOW, + .gpio49 = GPIO_LEVEL_LOW, + .gpio53 = GPIO_LEVEL_HIGH, + .gpio57 = GPIO_LEVEL_LOW, + .gpio60 = GPIO_LEVEL_HIGH, + .gpio61 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_NATIVE, + .gpio67 = GPIO_MODE_NATIVE, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_GPIO, + .gpio71 = GPIO_MODE_GPIO, + .gpio72 = GPIO_MODE_GPIO, + .gpio73 = GPIO_MODE_GPIO, + .gpio74 = GPIO_MODE_GPIO, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio68 = GPIO_DIR_OUTPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_OUTPUT, + .gpio71 = GPIO_DIR_OUTPUT, + .gpio72 = GPIO_DIR_OUTPUT, + .gpio73 = GPIO_DIR_OUTPUT, + .gpio74 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio68 = GPIO_LEVEL_HIGH, + .gpio70 = GPIO_LEVEL_HIGH, + .gpio71 = GPIO_LEVEL_HIGH, + .gpio72 = GPIO_LEVEL_LOW, + .gpio73 = GPIO_LEVEL_HIGH, + .gpio74 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/hp/snb_ivb_laptops/variants/8560w/hda_verb.c b/src/mainboard/hp/snb_ivb_laptops/variants/8560w/hda_verb.c new file mode 100644 index 0000000..d7573d5 --- /dev/null +++ b/src/mainboard/hp/snb_ivb_laptops/variants/8560w/hda_verb.c @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2020 The coreboot project Authors. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x111d7605, /* Codec Vendor / Device ID: IDT */ + 0x103c1631, /* Subsystem ID */ + + 11, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(0, 0x103c1631), + AZALIA_PIN_CFG(0, 0x0a, 0x40f000f0), + AZALIA_PIN_CFG(0, 0x0b, 0x0421401f), + AZALIA_PIN_CFG(0, 0x0c, 0x04a11020), + AZALIA_PIN_CFG(0, 0x0d, 0x90170110), + AZALIA_PIN_CFG(0, 0x0e, 0x40f000f0), + AZALIA_PIN_CFG(0, 0x0f, 0x40f000f0), + AZALIA_PIN_CFG(0, 0x10, 0x40f000f0), + AZALIA_PIN_CFG(0, 0x11, 0x90a60130), + AZALIA_PIN_CFG(0, 0x1f, 0x40f000f0), + AZALIA_PIN_CFG(0, 0x20, 0x40f000f0), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/hp/snb_ivb_laptops/variants/8560w/overridetree.cb b/src/mainboard/hp/snb_ivb_laptops/variants/8560w/overridetree.cb new file mode 100644 index 0000000..d716b46 --- /dev/null +++ b/src/mainboard/hp/snb_ivb_laptops/variants/8560w/overridetree.cb @@ -0,0 +1,60 @@ +# +# This file is part of the coreboot project. +# +# Copyright 2020 The coreboot project Authors. +# +# SPDX-License-Identifier: GPL-2.0-or-later +# + +chip northbridge/intel/sandybridge + device domain 0x0 on + subsystemid 0x103c 0x1631 inherit + device pci 01.0 on end # PCIe Bridge for discrete graphics + device pci 02.0 off end # Internal graphics + + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "docking_supported" = "0" + register "gen1_dec" = "0x007c0201" + register "gen2_dec" = "0x000c0101" + register "gen3_dec" = "0x00fcfe01" + register "gen4_dec" = "0x000402e9" + register "gpi6_routing" = "2" + register "pcie_hotplug_map" = "{ 0, 1, 1, 0, 0, 0, 0, 0 }" + # HDD(0), ODD(1), eSATA(4) + register "sata_port_map" = "0x3b" + + device pci 1c.0 on end # PCIe Port #1, WWAN + device pci 1c.1 on end # PCIe Port #2, ExpressCard + device pci 1c.2 on end # PCIe Port #3, SD/MMC + device pci 1c.3 on end # PCIe Port #4, WLAN + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1c.6 off end # PCIe Port #7 + device pci 1c.7 on end # PCIe Port #8, NEC USB 3.0 Host Controller + device pci 1f.0 on # LPC bridge + chip ec/hp/kbc1126 + register "ec_data_port" = "0x60" + register "ec_cmd_port" = "0x64" + register "ec_ctrl_reg" = "0xca" + register "ec_fan_ctrl_value" = "0x6b" + device pnp ff.1 off end + end + chip superio/smsc/lpc47n217 + device pnp 4e.3 on # Parallel + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 4e.4 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.5 off end # COM2 + end + + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end + end + end + end +end -- To view, visit https://review.coreboot.org/c/coreboot/+/39398 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I15181792b1efa45a2a94d78e43c6257da1acf950 Gerrit-Change-Number: 39398 Gerrit-PatchSet: 1 Gerrit-Owner: Iru Cai (vimacs) <mytbk920423(a)gmail.com> Gerrit-Reviewer: Iru Cai <mytbk920423(a)gmail.com> Gerrit-MessageType: newchange

4 10

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit March 2022