coreboot-gerrit February 2022

coreboot-gerrit@coreboot.org

1 participants
7066 discussions

Change in coreboot[master]: mb/google/volteer: Implement variant_devtree_update for volteer sku's
by Shaunak Saha (Code Review) 07 Aug '23

07 Aug '23

Shaunak Saha has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/44261 ) Change subject: mb/google/volteer: Implement variant_devtree_update for volteer sku's ...................................................................... mb/google/volteer: Implement variant_devtree_update for volteer sku's HybridStorageMode FSP UPD needs to be set only for optane storage. Enabling HybridStorageMode causes some extra delay in FspSiliconInit due to HECI command and hence is avoided for NVMe and SATA scenerios. This change disables "HybridStorageMode" by default from baseboard devicetree. Any volteer variant which is using optane should enable "HybridStorageMode" from the override devicetree file.This change also provides an implementation of variant_devtree_update() for volteer that enables HybridStorageMode for SKU ID = 3 and 5. BUG=b:158573805 TEST=Verify HybridStorageMode is disabled when SKU ID != 3 or 5 and enabled for those 2 sku's only. Signed-off-by: Shaunak Saha <shaunak.saha(a)intel.com> Change-Id: I5c3bcfafe1710155bb47f706c3568dd9500c1975 --- M src/mainboard/google/volteer/Makefile.inc A src/mainboard/google/volteer/ramstage.c M src/mainboard/google/volteer/variants/baseboard/devicetree.cb M src/mainboard/google/volteer/variants/baseboard/include/baseboard/variants.h M src/mainboard/google/volteer/variants/volteer/Makefile.inc A src/mainboard/google/volteer/variants/volteer/variant.c 6 files changed, 39 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/61/44261/1 diff --git a/src/mainboard/google/volteer/Makefile.inc b/src/mainboard/google/volteer/Makefile.inc index c01f993..b5579a7 100644 --- a/src/mainboard/google/volteer/Makefile.inc +++ b/src/mainboard/google/volteer/Makefile.inc @@ -10,6 +10,7 @@ ramstage-y += ec.c ramstage-$(CONFIG_FW_CONFIG) += fw_config.c ramstage-y += mainboard.c +ramstage-y += ramstage.c smm-y += smihandler.c diff --git a/src/mainboard/google/volteer/ramstage.c b/src/mainboard/google/volteer/ramstage.c new file mode 100644 index 0000000..084e69e --- /dev/null +++ b/src/mainboard/google/volteer/ramstage.c @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/variants.h> +#include <soc/ramstage.h> + +void mainboard_silicon_init_params(FSP_S_CONFIG *params) +{ + variant_devtree_update(); +} + +void __weak variant_devtree_update(void) +{ + /* Override dev tree settings per board */ +} + diff --git a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb index 53bbe5a..ccd1877 100644 --- a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb @@ -81,7 +81,9 @@ # Enable Optane PCIE 11 using clk 0 register "PcieRpEnable[10]" = "1" register "PcieRpLtrEnable[10]" = "1" - register "HybridStorageMode" = "1" + # Disable it by default. Device tree overwrite needs to enable this feature + # for platforms using Optane memory. + register "HybridStorageMode" = "0" # Enable SD Card PCIE 8 using clk 3 register "PcieRpEnable[7]" = "1" diff --git a/src/mainboard/google/volteer/variants/baseboard/include/baseboard/variants.h b/src/mainboard/google/volteer/variants/baseboard/include/baseboard/variants.h index 2f90a42..aa8ea27 100644 --- a/src/mainboard/google/volteer/variants/baseboard/include/baseboard/variants.h +++ b/src/mainboard/google/volteer/variants/baseboard/include/baseboard/variants.h @@ -21,4 +21,6 @@ const struct lpddr4x_cfg *variant_memory_params(void); int variant_memory_sku(void); +void variant_devtree_update(void); + #endif /* __BASEBOARD_VARIANTS_H__ */ diff --git a/src/mainboard/google/volteer/variants/volteer/Makefile.inc b/src/mainboard/google/volteer/variants/volteer/Makefile.inc index 13269db..04af3ae 100644 --- a/src/mainboard/google/volteer/variants/volteer/Makefile.inc +++ b/src/mainboard/google/volteer/variants/volteer/Makefile.inc @@ -3,3 +3,4 @@ bootblock-y += gpio.c ramstage-y += gpio.c +ramstage-y += variant.c diff --git a/src/mainboard/google/volteer/variants/volteer/variant.c b/src/mainboard/google/volteer/variants/volteer/variant.c new file mode 100644 index 0000000..8d3adef --- /dev/null +++ b/src/mainboard/google/volteer/variants/volteer/variant.c @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/variants.h> +#include <chip.h> +#include <ec/google/chromeec/ec.h> + +void variant_devtree_update(void) +{ + uint32_t sku_id; + config_t *cfg = config_of_soc(); + + if (google_chromeec_cbi_get_sku_id(&sku_id)) + return; + + if ((sku_id == 3) || (sku_id == 5)) + cfg->HybridStorageMode = 1; +} -- To view, visit https://review.coreboot.org/c/coreboot/+/44261 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I5c3bcfafe1710155bb47f706c3568dd9500c1975 Gerrit-Change-Number: 44261 Gerrit-PatchSet: 1 Gerrit-Owner: Shaunak Saha <shaunak.saha(a)intel.com> Gerrit-MessageType: newchange

4 11

Change in coreboot[master]: soc/intel/baytrail: Start VBOOT in bootblock
by Arthur Heymans (Code Review) 07 Aug '23

07 Aug '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36874 ) Change subject: soc/intel/baytrail: Start VBOOT in bootblock ...................................................................... soc/intel/baytrail: Start VBOOT in bootblock The earlier the more that can be updated via RW fmap regions. Change-Id: Ifcaf6ad8e27c09fee99cf6a8b12f9fadcb0cef2c Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/mainboard/google/rambi/Makefile.inc M src/soc/intel/baytrail/Kconfig M src/soc/intel/baytrail/Makefile.inc M src/soc/intel/baytrail/pmutil.c 4 files changed, 9 insertions(+), 6 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/74/36874/1 diff --git a/src/mainboard/google/rambi/Makefile.inc b/src/mainboard/google/rambi/Makefile.inc index 0e80b64..6660d23 100644 --- a/src/mainboard/google/rambi/Makefile.inc +++ b/src/mainboard/google/rambi/Makefile.inc @@ -13,6 +13,7 @@ ## GNU General Public License for more details. ## +verstage-$(CONFIG_CHROMEOS) += chromeos.c romstage-$(CONFIG_CHROMEOS) += chromeos.c ramstage-$(CONFIG_CHROMEOS) += chromeos.c ramstage-$(CONFIG_EC_GOOGLE_CHROMEEC) += ec.c diff --git a/src/soc/intel/baytrail/Kconfig b/src/soc/intel/baytrail/Kconfig index cfea93a..e4e8c30 100644 --- a/src/soc/intel/baytrail/Kconfig +++ b/src/soc/intel/baytrail/Kconfig @@ -41,11 +41,8 @@ config VBOOT select VBOOT_MUST_REQUEST_DISPLAY - select VBOOT_STARTS_IN_ROMSTAGE - -config BOOTBLOCK_CPU_INIT - string - default "soc/intel/baytrail/bootblock/bootblock.c" + select VBOOT_STARTS_IN_BOOTBLOCK + select VBOOT_SEPARATE_VERSTAGE config MMCONF_BASE_ADDRESS hex diff --git a/src/soc/intel/baytrail/Makefile.inc b/src/soc/intel/baytrail/Makefile.inc index eda3e25..d21f744 100644 --- a/src/soc/intel/baytrail/Makefile.inc +++ b/src/soc/intel/baytrail/Makefile.inc @@ -16,6 +16,8 @@ bootblock-y += ../../../cpu/x86/early_reset.S bootblock-y += bootblock/bootblock.c +verstage-y += pmutil.c + romstage-y += iosf.c romstage-y += memmap.c romstage-y += pmutil.c diff --git a/src/soc/intel/baytrail/pmutil.c b/src/soc/intel/baytrail/pmutil.c index 51174fc..2d14d84 100644 --- a/src/soc/intel/baytrail/pmutil.c +++ b/src/soc/intel/baytrail/pmutil.c @@ -368,7 +368,10 @@ { uint32_t gen_pmcon1; int rtc_fail; - struct chipset_power_state *ps = cbmem_find(CBMEM_ID_POWER_STATE); + struct chipset_power_state *ps = NULL; + + if (ENV_RAMSTAGE) + ps = cbmem_find(CBMEM_ID_POWER_STATE); if (ps != NULL) gen_pmcon1 = ps->gen_pmcon1; -- To view, visit https://review.coreboot.org/c/coreboot/+/36874 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ifcaf6ad8e27c09fee99cf6a8b12f9fadcb0cef2c Gerrit-Change-Number: 36874 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

4 6

Change in coreboot[master]: mb/gigabyte/ga-g41m-es2l: Prepare for a variant
by Arthur Heymans (Code Review) 07 Aug '23

07 Aug '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/41867 ) Change subject: mb/gigabyte/ga-g41m-es2l: Prepare for a variant ...................................................................... mb/gigabyte/ga-g41m-es2l: Prepare for a variant To ease the review of adding a variant (ga-g41m-combo) move a few things around without yet adding the variant. Change-Id: I0b22731849e157b76be97dbe02a7538f1cea472d Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/mainboard/gigabyte/ga-g41m-es2l/Kconfig M src/mainboard/gigabyte/ga-g41m-es2l/Makefile.inc M src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb M src/mainboard/gigabyte/ga-g41m-es2l/early_init.c A src/mainboard/gigabyte/ga-g41m-es2l/include/mainboard/superio.h A src/mainboard/gigabyte/ga-g41m-es2l/superio.h R src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/gpio.c R src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/hda_verb.c A src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/overridetree.cb A src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/superio.c 10 files changed, 166 insertions(+), 119 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/67/41867/1 diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/Kconfig b/src/mainboard/gigabyte/ga-g41m-es2l/Kconfig index fa6783d1..97f155a 100644 --- a/src/mainboard/gigabyte/ga-g41m-es2l/Kconfig +++ b/src/mainboard/gigabyte/ga-g41m-es2l/Kconfig @@ -7,7 +7,7 @@ select CPU_INTEL_SOCKET_LGA775 select NORTHBRIDGE_INTEL_X4X select SOUTHBRIDGE_INTEL_I82801GX - select SUPERIO_ITE_IT8718F + select SUPERIO_ITE_IT8718F if BOARD_GIGABYTE_GA_G41M_ES2L select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_1024 select PCIEXP_ASPM @@ -24,9 +24,17 @@ string default "gigabyte/ga-g41m-es2l" +config VARIANT_DIR + string + default "ga-g41m-es2l" if BOARD_GIGABYTE_GA_G41M_ES2L + +config OVERRIDE_DEVICETREE + string + default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb" + config MAINBOARD_PART_NUMBER string - default "GA-G41M-ES2L" + default "GA-G41M-ES2L" if BOARD_GIGABYTE_GA_G41M_ES2L config MAX_CPUS int diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/Makefile.inc b/src/mainboard/gigabyte/ga-g41m-es2l/Makefile.inc index 4100476..cf8ce96 100644 --- a/src/mainboard/gigabyte/ga-g41m-es2l/Makefile.inc +++ b/src/mainboard/gigabyte/ga-g41m-es2l/Makefile.inc @@ -1,7 +1,11 @@ ramstage-y += cstates.c -romstage-y += gpio.c bootblock-y += early_init.c romstage-y += early_init.c ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads + +CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/include +bootblock-y += variants/$(VARIANT_DIR)/superio.c +romstage-y += variants/$(VARIANT_DIR)/gpio.c +ramstage-y += variants/$(VARIANT_DIR)/hda_verb.c diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb b/src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb index 6328bc6..bdeda72 100644 --- a/src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb +++ b/src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb @@ -68,79 +68,6 @@ device pci 1e.3 off end # AC'97 Modem device pci 1f.0 on # ISA bridge subsystemid 0x1458 0x5001 - chip superio/ite/it8718f # Super I/O - register "TMPIN1.mode" = "THERMAL_RESISTOR" - register "TMPIN2.mode" = "THERMAL_RESISTOR" - register "TMPIN3.mode" = "THERMAL_DIODE" - register "TMPIN3.offset" = "0" - register "ec.vin_mask" = "VIN7 | VIN4 | VIN3 | VIN2 | VIN1 | VIN0" - - register "FAN1.mode" = "FAN_SMART_AUTOMATIC" - register "FAN1.smart.tmpin" = "3" - register "FAN1.smart.tmp_off" = "25" - register "FAN1.smart.tmp_start" = "30" - register "FAN1.smart.tmp_full" = "65" - register "FAN1.smart.tmp_delta" = "3" - register "FAN1.smart.smoothing" = "1" - register "FAN1.smart.pwm_start" = "0" - register "FAN1.smart.slope" = "10" - - register "FAN2.mode" = "FAN_SMART_AUTOMATIC" - register "FAN2.smart.tmpin" = "3" - register "FAN2.smart.tmp_off" = "25" - register "FAN2.smart.tmp_start" = "30" - register "FAN2.smart.tmp_full" = "65" - register "FAN2.smart.tmp_delta" = "3" - register "FAN2.smart.smoothing" = "1" - register "FAN2.smart.pwm_start" = "0" - register "FAN2.smart.slope" = "10" - - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - irq 0xf0 = 0x00 - irq 0xf1 = 0x80 - end - device pnp 2e.1 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - io 0x62 = 0x000 - drq 0x74 = 4 - irq 0xf0 = 0x08 - end - device pnp 2e.4 on # Environment controller - io 0x60 = 0x290 - irq 0x70 = 0x00 - io 0x62 = 0x000 - irq 0xf0 = 0x80 - irq 0xf1 = 0x00 - irq 0xf2 = 0x0a - irq 0xf3 = 0x80 - irq 0xf4 = 0x00 - irq 0xf5 = 0x00 - irq 0xf6 = 0xff - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - irq 0x70 = 1 - io 0x62 = 0x64 - irq 0xf0 = 0x48 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - irq 0x71 = 2 - irq 0xf0 = 0 - end - end end device pci 1f.1 on # PATA/IDE subsystemid 0x1458 0xb004 diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/early_init.c b/src/mainboard/gigabyte/ga-g41m-es2l/early_init.c index 4b0ea16..c204070 100644 --- a/src/mainboard/gigabyte/ga-g41m-es2l/early_init.c +++ b/src/mainboard/gigabyte/ga-g41m-es2l/early_init.c @@ -4,12 +4,7 @@ #include <device/pci_ops.h> #include <southbridge/intel/i82801gx/i82801gx.h> #include <northbridge/intel/x4x/x4x.h> -#include <superio/ite/it8718f/it8718f.h> -#include <superio/ite/common/ite.h> - -#define SERIAL_DEV PNP_DEV(0x2e, IT8718F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8718F_GPIO) -#define EC_DEV PNP_DEV(0x2e, IT8718F_EC) +#include <mainboard/superio.h> /* Early mainboard specific GPIO setup. * We should use standard gpio.h eventually @@ -17,43 +12,7 @@ void bootblock_mainboard_early_init(void) { - /* Set default GPIOs on superio */ - ite_reg_write(GPIO_DEV, 0x25, 0x00); - ite_reg_write(GPIO_DEV, 0x26, 0xc7); - ite_reg_write(GPIO_DEV, 0x27, 0x80); - ite_reg_write(GPIO_DEV, 0x28, 0x41); - ite_reg_write(GPIO_DEV, 0x29, 0x0a); - ite_reg_write(GPIO_DEV, 0x2c, 0x01); - ite_reg_write(GPIO_DEV, 0x62, 0x08); - ite_reg_write(GPIO_DEV, 0x72, 0x00); - ite_reg_write(GPIO_DEV, 0x73, 0x00); - ite_reg_write(GPIO_DEV, 0xb8, 0x00); - ite_reg_write(GPIO_DEV, 0xbb, 0x40); - ite_reg_write(GPIO_DEV, 0xc0, 0x00); - ite_reg_write(GPIO_DEV, 0xc1, 0xc7); - ite_reg_write(GPIO_DEV, 0xc2, 0x80); - ite_reg_write(GPIO_DEV, 0xc3, 0x01); - ite_reg_write(GPIO_DEV, 0xc4, 0x0a); - ite_reg_write(GPIO_DEV, 0xc8, 0x00); - ite_reg_write(GPIO_DEV, 0xc9, 0x04); - ite_reg_write(GPIO_DEV, 0xcb, 0x00); - ite_reg_write(GPIO_DEV, 0xcc, 0x02); - ite_reg_write(GPIO_DEV, 0xf0, 0x10); - ite_reg_write(GPIO_DEV, 0xf1, 0x40); - ite_reg_write(GPIO_DEV, 0xf6, 0x26); - ite_reg_write(GPIO_DEV, 0xfc, 0x52); - - ite_reg_write(EC_DEV, 0xf0, 0x80); - ite_reg_write(EC_DEV, 0xf1, 0x00); - ite_reg_write(EC_DEV, 0xf2, 0x0a); - ite_reg_write(EC_DEV, 0xf3, 0x80); - ite_reg_write(EC_DEV, 0x70, 0x00); // Don't use IRQ9 - ite_reg_write(EC_DEV, 0x30, 0x01); // Enable - - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - /* Disable SIO reboot */ - ite_reg_write(GPIO_DEV, 0xEF, 0x7E); + mainboard_early_superio(); /* IRQ routing */ RCBA32(D31IP) = 0x00002210; diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/include/mainboard/superio.h b/src/mainboard/gigabyte/ga-g41m-es2l/include/mainboard/superio.h new file mode 100644 index 0000000..ddc7d04 --- /dev/null +++ b/src/mainboard/gigabyte/ga-g41m-es2l/include/mainboard/superio.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifndef MAINBOARD_GIGABYTE_GA_G41M_ES2l_SUPERIO +#define MAINBOARD_GIGABYTE_GA_G41M_ES2l_SUPERIO + +void mainboard_early_superio(void); + +#endif diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/superio.h b/src/mainboard/gigabyte/ga-g41m-es2l/superio.h new file mode 100644 index 0000000..62bf591 --- /dev/null +++ b/src/mainboard/gigabyte/ga-g41m-es2l/superio.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifdef MAINBOARD_GIGABYTE_GA_G41M_ES2l_SUPERIO +#define MAINBOARD_GIGABYTE_GA_G41M_ES2l_SUPERIO + + + +#endif diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/gpio.c b/src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/gpio.c similarity index 100% rename from src/mainboard/gigabyte/ga-g41m-es2l/gpio.c rename to src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/gpio.c diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/hda_verb.c b/src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/hda_verb.c similarity index 100% rename from src/mainboard/gigabyte/ga-g41m-es2l/hda_verb.c rename to src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/hda_verb.c diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/overridetree.cb b/src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/overridetree.cb new file mode 100644 index 0000000..f481195 --- /dev/null +++ b/src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/overridetree.cb @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +chip northbridge/intel/x4x # Northbridge + device domain 0 on # PCI domain + chip southbridge/intel/i82801gx # Southbridge + device pci 1f.0 on # ISA bridge + subsystemid 0x1458 0x5001 + chip superio/ite/it8718f # Super I/O + register "TMPIN1.mode" = "THERMAL_RESISTOR" + register "TMPIN2.mode" = "THERMAL_RESISTOR" + register "TMPIN3.mode" = "THERMAL_DIODE" + register "TMPIN3.offset" = "0" + register "ec.vin_mask" = "VIN7 | VIN4 | VIN3 | VIN2 | VIN1 | VIN0" + + register "FAN1.mode" = "FAN_SMART_AUTOMATIC" + register "FAN1.smart.tmpin" = "3" + register "FAN1.smart.tmp_off" = "25" + register "FAN1.smart.tmp_start" = "30" + register "FAN1.smart.tmp_full" = "65" + register "FAN1.smart.tmp_delta" = "3" + register "FAN1.smart.smoothing" = "1" + register "FAN1.smart.pwm_start" = "0" + register "FAN1.smart.slope" = "10" + + register "FAN2.mode" = "FAN_SMART_AUTOMATIC" + register "FAN2.smart.tmpin" = "3" + register "FAN2.smart.tmp_off" = "25" + register "FAN2.smart.tmp_start" = "30" + register "FAN2.smart.tmp_full" = "65" + register "FAN2.smart.tmp_delta" = "3" + register "FAN2.smart.smoothing" = "1" + register "FAN2.smart.pwm_start" = "0" + register "FAN2.smart.slope" = "10" + + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + irq 0xf0 = 0x00 + irq 0xf1 = 0x80 + end + device pnp 2e.1 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + io 0x62 = 0x000 + drq 0x74 = 4 + irq 0xf0 = 0x08 + end + device pnp 2e.4 on # Environment controller + io 0x60 = 0x290 + irq 0x70 = 0x00 + io 0x62 = 0x000 + irq 0xf0 = 0x80 + irq 0xf1 = 0x00 + irq 0xf2 = 0x0a + irq 0xf3 = 0x80 + irq 0xf4 = 0x00 + irq 0xf5 = 0x00 + irq 0xf6 = 0xff + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + irq 0x70 = 1 + io 0x62 = 0x64 + irq 0xf0 = 0x48 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + irq 0x71 = 2 + irq 0xf0 = 0 + end + end + end + end + end +end diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/superio.c b/src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/superio.c new file mode 100644 index 0000000..c759532 --- /dev/null +++ b/src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/superio.c @@ -0,0 +1,49 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#include <mainboard/superio.h> +#include <superio/ite/it8718f/it8718f.h> +#include <superio/ite/common/ite.h> + +#define SERIAL_DEV PNP_DEV(0x2e, IT8718F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8718F_GPIO) +#define EC_DEV PNP_DEV(0x2e, IT8718F_EC) + +void mainboard_early_superio(void) +{ + /* Set default GPIOs on superio */ + ite_reg_write(GPIO_DEV, 0x25, 0x00); + ite_reg_write(GPIO_DEV, 0x26, 0xc7); + ite_reg_write(GPIO_DEV, 0x27, 0x80); + ite_reg_write(GPIO_DEV, 0x28, 0x41); + ite_reg_write(GPIO_DEV, 0x29, 0x0a); + ite_reg_write(GPIO_DEV, 0x2c, 0x01); + ite_reg_write(GPIO_DEV, 0x62, 0x08); + ite_reg_write(GPIO_DEV, 0x72, 0x00); + ite_reg_write(GPIO_DEV, 0x73, 0x00); + ite_reg_write(GPIO_DEV, 0xb8, 0x00); + ite_reg_write(GPIO_DEV, 0xbb, 0x40); + ite_reg_write(GPIO_DEV, 0xc0, 0x00); + ite_reg_write(GPIO_DEV, 0xc1, 0xc7); + ite_reg_write(GPIO_DEV, 0xc2, 0x80); + ite_reg_write(GPIO_DEV, 0xc3, 0x01); + ite_reg_write(GPIO_DEV, 0xc4, 0x0a); + ite_reg_write(GPIO_DEV, 0xc8, 0x00); + ite_reg_write(GPIO_DEV, 0xc9, 0x04); + ite_reg_write(GPIO_DEV, 0xcb, 0x00); + ite_reg_write(GPIO_DEV, 0xcc, 0x02); + ite_reg_write(GPIO_DEV, 0xf0, 0x10); + ite_reg_write(GPIO_DEV, 0xf1, 0x40); + ite_reg_write(GPIO_DEV, 0xf6, 0x26); + ite_reg_write(GPIO_DEV, 0xfc, 0x52); + + ite_reg_write(EC_DEV, 0xf0, 0x80); + ite_reg_write(EC_DEV, 0xf1, 0x00); + ite_reg_write(EC_DEV, 0xf2, 0x0a); + ite_reg_write(EC_DEV, 0xf3, 0x80); + ite_reg_write(EC_DEV, 0x70, 0x00); // Don't use IRQ9 + ite_reg_write(EC_DEV, 0x30, 0x01); // Enable + + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + /* Disable SIO reboot */ + ite_reg_write(GPIO_DEV, 0xEF, 0x7E); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/41867 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I0b22731849e157b76be97dbe02a7538f1cea472d Gerrit-Change-Number: 41867 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

3 3

Change in coreboot[master]: The .config is overwritten when added to coreboot.rom via CBFS at the...
by Jeremy Jackson (Code Review) 07 Aug '23

07 Aug '23

Jeremy Jackson has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/42028 ) Change subject: The .config is overwritten when added to coreboot.rom via CBFS at the end of the build (if you choose that option)... should this be a separate file for each of fallback and normal? Since there can be two different versions and/or configurations, would fallback/config and normal/config make more sense? Also the "revision" file might benefit from similar treatment. ...................................................................... The .config is overwritten when added to coreboot.rom via CBFS at the end of the build (if you choose that option)... should this be a separate file for each of fallback and normal? Since there can be two different versions and/or configurations, would fallback/config and normal/config make more sense? Also the "revision" file might benefit from similar treatment. Signed-off-by: Jeremy Jackson <jerj(a)coplanar.net> Change-Id: I3e904e44137f731f239f51dbf224965f33838e19 --- M Makefile.inc 1 file changed, 6 insertions(+), 6 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/28/42028/1 diff --git a/Makefile.inc b/Makefile.inc index 86467a6..b547f11 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -1195,13 +1195,13 @@ vgaroms/seavgabios.bin-file := $(CONFIG_PAYLOAD_VGABIOS_FILE) vgaroms/seavgabios.bin-type := raw -cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += config -config-file := $(DOTCONFIG):defconfig -config-type := raw +cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += $(CONFIG_CBFS_PREFIX)/config +$(CONFIG_CBFS_PREFIX)/config-file := $(DOTCONFIG):defconfig +$(CONFIG_CBFS_PREFIX)/config-type := raw -cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += revision -revision-file := $(obj)/build.h -revision-type := raw +cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += $(CONFIG_CBFS_PREFIX)/revision +$(CONFIG_CBFS_PREFIX)/revision-file := $(obj)/build.h +$(CONFIG_CBFS_PREFIX)/revision-type := raw BOOTSPLASH_SUFFIX=$(suffix $(call strip_quotes,$(CONFIG_BOOTSPLASH_FILE))) cbfs-files-$(CONFIG_BOOTSPLASH_IMAGE) += bootsplash$(BOOTSPLASH_SUFFIX) -- To view, visit https://review.coreboot.org/c/coreboot/+/42028 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3e904e44137f731f239f51dbf224965f33838e19 Gerrit-Change-Number: 42028 Gerrit-PatchSet: 1 Gerrit-Owner: Jeremy Jackson <jerj(a)coplanar.net> Gerrit-MessageType: newchange

7 14

Change in coreboot[master]: WIP: Hash RAM contents on S3 entry and verify on S3 resume
by Raul Rangel (Code Review) 07 Aug '23

07 Aug '23

Raul Rangel has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/42890 ) Change subject: WIP: Hash RAM contents on S3 entry and verify on S3 resume ...................................................................... WIP: Hash RAM contents on S3 entry and verify on S3 resume I used murmur3 since it's supposed to be fast. Though I don't think the license is really compatible. The ram_hash code still needs some refactoring to reduce duplication and to add the ability to handle unaligned blocks. BUG=b:159081993 TEST=Boot trembyle and see no verification failures. Signed-off-by: Raul E Rangel <rrangel(a)chromium.org> Change-Id: I6b38facba17bdd57a94987cfb49e71067ff8b769 --- M Makefile.inc M src/arch/x86/acpi_s3.c A src/include/murmur3.h A src/include/ram_hash.h M src/lib/Makefile.inc A src/lib/murmur3.c A src/lib/ram_hash.c M src/soc/amd/picasso/chip.c M src/soc/amd/picasso/memlayout.ld M src/soc/amd/picasso/smihandler.c 10 files changed, 595 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/90/42890/1 diff --git a/Makefile.inc b/Makefile.inc index 86335d9..b7020e8 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -410,8 +410,8 @@ CFLAGS_common += -Wwrite-strings -Wredundant-decls -Wno-trigraphs -Wimplicit-fallthrough CFLAGS_common += -Wstrict-aliasing -Wshadow -Wdate-time -Wtype-limits -Wvla CFLAGS_common += -Wlogical-op -Wduplicated-cond -Wdangling-else -CFLAGS_common += -fno-common -ffreestanding -fno-builtin -fomit-frame-pointer -CFLAGS_common += -ffunction-sections -fdata-sections -fno-pie +CFLAGS_common += -fno-common -ffreestanding -fno-builtin -fmit-frame-pointer +CFLAGS_common += -ffunction-sections -fdata-sections -fno-pie -Wno-implicit-fallthrough ifeq ($(CONFIG_COMPILER_GCC),y) # Don't add these GCC specific flags when running scan-build ifeq ($(CCC_ANALYZER_OUTPUT_FORMAT),) diff --git a/src/arch/x86/acpi_s3.c b/src/arch/x86/acpi_s3.c index d4c697e..9c209b2 100644 --- a/src/arch/x86/acpi_s3.c +++ b/src/arch/x86/acpi_s3.c @@ -9,6 +9,7 @@ #include <cpu/x86/smm.h> #include <fallback.h> #include <timestamp.h> +#include <ram_hash.h> #include <romstage_handoff.h> #if ENV_RAMSTAGE || ENV_POSTCAR @@ -70,6 +71,8 @@ timestamp_add_now(TS_ACPI_WAKE_JUMP); + verify_ram(); + acpi_do_wakeup((uintptr_t)vector); } diff --git a/src/include/murmur3.h b/src/include/murmur3.h new file mode 100644 index 0000000..138f87f --- /dev/null +++ b/src/include/murmur3.h @@ -0,0 +1,29 @@ +//----------------------------------------------------------------------------- +// MurmurHash3 was written by Austin Appleby, and is placed in the +// public domain. The author hereby disclaims copyright to this source +// code. + +#ifndef _MURMURHASH3_H_ +#define _MURMURHASH3_H_ + +#include <stdint.h> + +#ifdef __cplusplus +extern "C" { +#endif + +//----------------------------------------------------------------------------- + +void MurmurHash3_x86_32 (const void *key, int len, uint32_t seed, uint32_t *out); + +void MurmurHash3_x86_128(const void *key, int len, uint32_t seed, void *out); + +void MurmurHash3_x64_128(const void *key, int len, uint32_t seed, void *out); + +//----------------------------------------------------------------------------- + +#ifdef __cplusplus +} +#endif + +#endif // _MURMURHASH3_H_ diff --git a/src/include/ram_hash.h b/src/include/ram_hash.h new file mode 100644 index 0000000..67eaa76 --- /dev/null +++ b/src/include/ram_hash.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef RAM_HASH_H +#define RAM_HASH_H + +void hash_ram(void); +void verify_ram(void); + +#endif /* RAM_HASH_H */ diff --git a/src/lib/Makefile.inc b/src/lib/Makefile.inc index e0003bd..5bf0df2 100644 --- a/src/lib/Makefile.inc +++ b/src/lib/Makefile.inc @@ -145,6 +145,10 @@ ramstage-y += imd_cbmem.c ramstage-y += imd.c +bootblock-y += ram_hash.c crc32.c murmur3.c +ramstage-y += ram_hash.c crc32.c murmur3.c +smm-y += ram_hash.c crc32.c murmur3.c + postcar-$(CONFIG_VENDOR_EMULATION) += ramdetect.c postcar-y += cbmem_common.c postcar-$(CONFIG_CONSOLE_CBMEM) += cbmem_console.c diff --git a/src/lib/murmur3.c b/src/lib/murmur3.c new file mode 100644 index 0000000..f2b6b18 --- /dev/null +++ b/src/lib/murmur3.c @@ -0,0 +1,314 @@ +//----------------------------------------------------------------------------- +// MurmurHash3 was written by Austin Appleby, and is placed in the public +// domain. The author hereby disclaims copyright to this source code. + +// Note - The x86 and x64 versions do _not_ produce the same results, as the +// algorithms are optimized for their respective platforms. You can still +// compile and run any of them on any platform, but your performance with the +// non-native version will be less than optimal. + +#include "murmur3.h" + +//----------------------------------------------------------------------------- +// Platform-specific functions and macros + +#ifdef __GNUC__ +#define FORCE_INLINE __attribute__((always_inline)) inline +#else +#define FORCE_INLINE inline +#endif + +static FORCE_INLINE uint32_t rotl32 ( uint32_t x, int8_t r ) +{ + return (x << r) | (x >> (32 - r)); +} + +static FORCE_INLINE uint64_t rotl64 ( uint64_t x, int8_t r ) +{ + return (x << r) | (x >> (64 - r)); +} + +#define ROTL32(x,y) rotl32(x,y) +#define ROTL64(x,y) rotl64(x,y) + +#define BIG_CONSTANT(x) (x##LLU) + +//----------------------------------------------------------------------------- +// Block read - if your platform needs to do endian-swapping or can only +// handle aligned reads, do the conversion here + +#define getblock(p, i) (p[i]) + +//----------------------------------------------------------------------------- +// Finalization mix - force all bits of a hash block to avalanche + +static FORCE_INLINE uint32_t fmix32 ( uint32_t h ) +{ + h ^= h >> 16; + h *= 0x85ebca6b; + h ^= h >> 13; + h *= 0xc2b2ae35; + h ^= h >> 16; + + return h; +} + +//---------- + +static FORCE_INLINE uint64_t fmix64 ( uint64_t k ) +{ + k ^= k >> 33; + k *= BIG_CONSTANT(0xff51afd7ed558ccd); + k ^= k >> 33; + k *= BIG_CONSTANT(0xc4ceb9fe1a85ec53); + k ^= k >> 33; + + return k; +} + +//----------------------------------------------------------------------------- + +void MurmurHash3_x86_32 ( const void * key, int len, + uint32_t seed, uint32_t * out ) +{ + const uint8_t * data = (const uint8_t*)key; + const int nblocks = len / 4; + int i; + + uint32_t h1 = seed; + + uint32_t c1 = 0xcc9e2d51; + uint32_t c2 = 0x1b873593; + + //---------- + // body + + const uint32_t * blocks = (const uint32_t *)(data + nblocks*4); + + for(i = -nblocks; i; i++) + { + uint32_t k1 = getblock(blocks,i); + + k1 *= c1; + k1 = ROTL32(k1,15); + k1 *= c2; + + h1 ^= k1; + h1 = ROTL32(h1,13); + h1 = h1*5+0xe6546b64; + } + + //---------- + // tail + + const uint8_t * tail = (const uint8_t*)(data + nblocks*4); + + uint32_t k1 = 0; + + switch(len & 3) + { + case 3: k1 ^= tail[2] << 16; + case 2: k1 ^= tail[1] << 8; + case 1: k1 ^= tail[0]; + k1 *= c1; k1 = ROTL32(k1,15); k1 *= c2; h1 ^= k1; + }; + + //---------- + // finalization + + h1 ^= len; + + h1 = fmix32(h1); + + *(uint32_t*)out = h1; +} + +//----------------------------------------------------------------------------- + +void MurmurHash3_x86_128 ( const void * key, const int len, + uint32_t seed, void * out ) +{ + const uint8_t * data = (const uint8_t*)key; + const int nblocks = len / 16; + int i; + + uint32_t h1 = seed; + uint32_t h2 = seed; + uint32_t h3 = seed; + uint32_t h4 = seed; + + uint32_t c1 = 0x239b961b; + uint32_t c2 = 0xab0e9789; + uint32_t c3 = 0x38b34ae5; + uint32_t c4 = 0xa1e38b93; + + //---------- + // body + + const uint32_t * blocks = (const uint32_t *)(data + nblocks*16); + + for(i = -nblocks; i; i++) + { + uint32_t k1 = getblock(blocks,i*4+0); + uint32_t k2 = getblock(blocks,i*4+1); + uint32_t k3 = getblock(blocks,i*4+2); + uint32_t k4 = getblock(blocks,i*4+3); + + k1 *= c1; k1 = ROTL32(k1,15); k1 *= c2; h1 ^= k1; + + h1 = ROTL32(h1,19); h1 += h2; h1 = h1*5+0x561ccd1b; + + k2 *= c2; k2 = ROTL32(k2,16); k2 *= c3; h2 ^= k2; + + h2 = ROTL32(h2,17); h2 += h3; h2 = h2*5+0x0bcaa747; + + k3 *= c3; k3 = ROTL32(k3,17); k3 *= c4; h3 ^= k3; + + h3 = ROTL32(h3,15); h3 += h4; h3 = h3*5+0x96cd1c35; + + k4 *= c4; k4 = ROTL32(k4,18); k4 *= c1; h4 ^= k4; + + h4 = ROTL32(h4,13); h4 += h1; h4 = h4*5+0x32ac3b17; + } + + //---------- + // tail + + const uint8_t * tail = (const uint8_t*)(data + nblocks*16); + + uint32_t k1 = 0; + uint32_t k2 = 0; + uint32_t k3 = 0; + uint32_t k4 = 0; + + switch(len & 15) + { + case 15: k4 ^= tail[14] << 16; + case 14: k4 ^= tail[13] << 8; + case 13: k4 ^= tail[12] << 0; + k4 *= c4; k4 = ROTL32(k4,18); k4 *= c1; h4 ^= k4; + + case 12: k3 ^= tail[11] << 24; + case 11: k3 ^= tail[10] << 16; + case 10: k3 ^= tail[ 9] << 8; + case 9: k3 ^= tail[ 8] << 0; + k3 *= c3; k3 = ROTL32(k3,17); k3 *= c4; h3 ^= k3; + + case 8: k2 ^= tail[ 7] << 24; + case 7: k2 ^= tail[ 6] << 16; + case 6: k2 ^= tail[ 5] << 8; + case 5: k2 ^= tail[ 4] << 0; + k2 *= c2; k2 = ROTL32(k2,16); k2 *= c3; h2 ^= k2; + + case 4: k1 ^= tail[ 3] << 24; + case 3: k1 ^= tail[ 2] << 16; + case 2: k1 ^= tail[ 1] << 8; + case 1: k1 ^= tail[ 0] << 0; + k1 *= c1; k1 = ROTL32(k1,15); k1 *= c2; h1 ^= k1; + }; + + //---------- + // finalization + + h1 ^= len; h2 ^= len; h3 ^= len; h4 ^= len; + + h1 += h2; h1 += h3; h1 += h4; + h2 += h1; h3 += h1; h4 += h1; + + h1 = fmix32(h1); + h2 = fmix32(h2); + h3 = fmix32(h3); + h4 = fmix32(h4); + + h1 += h2; h1 += h3; h1 += h4; + h2 += h1; h3 += h1; h4 += h1; + + ((uint32_t*)out)[0] = h1; + ((uint32_t*)out)[1] = h2; + ((uint32_t*)out)[2] = h3; + ((uint32_t*)out)[3] = h4; +} + +//----------------------------------------------------------------------------- + +void MurmurHash3_x64_128 ( const void * key, const int len, + const uint32_t seed, void * out ) +{ + const uint8_t * data = (const uint8_t*)key; + const int nblocks = len / 16; + int i; + + uint64_t h1 = seed; + uint64_t h2 = seed; + + uint64_t c1 = BIG_CONSTANT(0x87c37b91114253d5); + uint64_t c2 = BIG_CONSTANT(0x4cf5ad432745937f); + + //---------- + // body + + const uint64_t * blocks = (const uint64_t *)(data); + + for(i = 0; i < nblocks; i++) + { + uint64_t k1 = getblock(blocks,i*2+0); + uint64_t k2 = getblock(blocks,i*2+1); + + k1 *= c1; k1 = ROTL64(k1,31); k1 *= c2; h1 ^= k1; + + h1 = ROTL64(h1,27); h1 += h2; h1 = h1*5+0x52dce729; + + k2 *= c2; k2 = ROTL64(k2,33); k2 *= c1; h2 ^= k2; + + h2 = ROTL64(h2,31); h2 += h1; h2 = h2*5+0x38495ab5; + } + + //---------- + // tail + + const uint8_t * tail = (const uint8_t*)(data + nblocks*16); + + uint64_t k1 = 0; + uint64_t k2 = 0; + + switch(len & 15) + { + case 15: k2 ^= (uint64_t)(tail[14]) << 48; + case 14: k2 ^= (uint64_t)(tail[13]) << 40; + case 13: k2 ^= (uint64_t)(tail[12]) << 32; + case 12: k2 ^= (uint64_t)(tail[11]) << 24; + case 11: k2 ^= (uint64_t)(tail[10]) << 16; + case 10: k2 ^= (uint64_t)(tail[ 9]) << 8; + case 9: k2 ^= (uint64_t)(tail[ 8]) << 0; + k2 *= c2; k2 = ROTL64(k2,33); k2 *= c1; h2 ^= k2; + + case 8: k1 ^= (uint64_t)(tail[ 7]) << 56; + case 7: k1 ^= (uint64_t)(tail[ 6]) << 48; + case 6: k1 ^= (uint64_t)(tail[ 5]) << 40; + case 5: k1 ^= (uint64_t)(tail[ 4]) << 32; + case 4: k1 ^= (uint64_t)(tail[ 3]) << 24; + case 3: k1 ^= (uint64_t)(tail[ 2]) << 16; + case 2: k1 ^= (uint64_t)(tail[ 1]) << 8; + case 1: k1 ^= (uint64_t)(tail[ 0]) << 0; + k1 *= c1; k1 = ROTL64(k1,31); k1 *= c2; h1 ^= k1; + }; + + //---------- + // finalization + + h1 ^= len; h2 ^= len; + + h1 += h2; + h2 += h1; + + h1 = fmix64(h1); + h2 = fmix64(h2); + + h1 += h2; + h2 += h1; + + ((uint64_t*)out)[0] = h1; + ((uint64_t*)out)[1] = h2; +} + +//----------------------------------------------------------------------------- diff --git a/src/lib/ram_hash.c b/src/lib/ram_hash.c new file mode 100644 index 0000000..9f07183 --- /dev/null +++ b/src/lib/ram_hash.c @@ -0,0 +1,223 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <stdint.h> +#include <murmur3.h> +#include <ram_hash.h> +#include <string.h> +#include <lib.h> +#include <console/console.h> +#include <commonlib/bsd/helpers.h> + +#define HASH_BUFFER 0x2BD000 +#define EHASH_BUFFER 0x3BD000 +// extern char HASH_BUFFER[]; +// extern char EHASH_BUFFER[]; + +struct hash_range { + uintptr_t start; + uintptr_t end; + unsigned int block_size; + unsigned int diff; +}; + +struct hash_entry { + uint32_t hash; + uint32_t data[]; +}; + +struct hash_range mem_layout[] = { + { + .start = 0x1000, + .end = 0xa0000, + .block_size = 1 * KiB, + .diff = 1 + }, + { + .start = 0x3bd000, + .end = 0x3c0000, + .block_size = 4 * KiB, + .diff = 0 + }, + { + .start = 0x3c0000, + .end = 0xcc4c0000, + .block_size = 256 * KiB, + .diff = 0 + }, + { + .start = 0xcc4c0000, + .end = 0xcc51c000, + .block_size = 4 * KiB, + .diff = 0 + }, +}; + +static struct hash_entry *hash_range(const struct hash_range *range, struct hash_entry *entry, + size_t buffer_size) +{ + unsigned int total_blocks = (range->end - range->start) / range->block_size; + void *current; + unsigned int i; + + for (i = 0; i < total_blocks; ++i) { + current = (void *)(range->start + i * range->block_size); + + if (!(i % 256)) + printk(BIOS_DEBUG, "%s: block %u/%u @ %p\n", __func__, i, total_blocks, + current); + + // printk(BIOS_ERR, "%s: buffer_size: %zd\n", __func__, buffer_size); + + if (buffer_size < sizeof(*entry)) { + printk(BIOS_ERR, "%s: Hash buffer is too small for entry\n", __func__); + return NULL; + } + + // printk(BIOS_ERR, "%s: current: %p\n", __func__, current); + // printk(BIOS_ERR, "%s: current_entry: %p\n", __func__, entry); + + /* Allocate one entry in the buffer */ + buffer_size -= sizeof(*entry); + + MurmurHash3_x86_32(current, range->block_size, 0xDEADBEEF, &entry->hash); + // printk(BIOS_ERR, "%s: crc: %#x\n", __func__, entry->hash); + + if (range->diff) { + if (buffer_size < range->block_size) { + printk(BIOS_DEBUG, "%s: Hash buffer is too small for data\n", + __func__); + return NULL; + } + + /* Allocate diff size in buffer */ + buffer_size -= range->block_size; + memcpy(entry->data, current, range->block_size); + + entry = (struct hash_entry *)((uintptr_t)(entry + 1) + + range->block_size); + } else { + entry++; + } + // printk(BIOS_ERR, "%s: next_entry: %p\n", __func__, entry); + } + + return entry; +} + +void hash_ram(void) +{ + struct hash_entry *current_entry = (struct hash_entry *)HASH_BUFFER; + struct hash_range *range; + unsigned int i; + + printk(BIOS_INFO, "%s: Start: HASH_BUFFER: %#x, EHASH_BUFFER: %#x\n", __func__, + HASH_BUFFER, EHASH_BUFFER); + + for (i = 0; i < ARRAY_SIZE(mem_layout); ++i) { + range = &mem_layout[i]; + printk(BIOS_DEBUG, "%s: Hashing range %p -> %p\n", __func__, + (void *)range->start, (void *)range->end); + current_entry = + hash_range(range, current_entry, + ((uintptr_t)EHASH_BUFFER - (uintptr_t)current_entry)); + + if (!current_entry) { + printk(BIOS_ERR, "%s: Hash buffer is too small\n", __func__); + break; + } + } + + printk(BIOS_INFO, "%s: Done\n", __func__); +} + +static struct hash_entry *verify_range(const struct hash_range *range, struct hash_entry *entry, + size_t buffer_size) +{ + unsigned int total_blocks = (range->end - range->start) / range->block_size; + void *current; + unsigned int i; + uint32_t crc; + + for (i = 0; i < total_blocks; ++i) { + current = (void *)(range->start + i * range->block_size); + + if (!(i % 256)) + printk(BIOS_DEBUG, "%s: block %u/%u @ %p\n", __func__, i, total_blocks, + current); + + // printk(BIOS_ERR, "%s: buffer_size: %zd\n", __func__, buffer_size); + + if (buffer_size < sizeof(*entry)) { + printk(BIOS_ERR, "%s: Hash buffer is too small for entry\n", __func__); + return NULL; + } + + // printk(BIOS_ERR, "%s: current: %p\n", __func__, current); + // printk(BIOS_ERR, "%s: current_entry: %p\n", __func__, entry); + + /* Allocate one entry in the buffer */ + buffer_size -= sizeof(*entry); + + MurmurHash3_x86_32(current, range->block_size, 0xDEADBEEF, &crc); + // printk(BIOS_ERR, "%s: crc: %#x\n", __func__, entry->hash); + + if (crc != entry->hash) { + printk(BIOS_ERR, "%s: crc error at %p. %x != %x\n", __func__, current, + crc, entry->hash); + } + + if (range->diff) { + if (buffer_size < range->block_size) { + printk(BIOS_DEBUG, "%s: Hash buffer is too small for data\n", + __func__); + return NULL; + } + + /* Allocate diff size in buffer */ + buffer_size -= range->block_size; + + if (crc != entry->hash) { + + printk(BIOS_ERR, "Expected:\n"); + hexdump(entry->data, range->block_size); + + printk(BIOS_ERR, "Actual:\n"); + hexdump(current, range->block_size); + } + + entry = (struct hash_entry *)((uintptr_t)(entry + 1) + + range->block_size); + } else { + entry++; + } + // printk(BIOS_ERR, "%s: next_entry: %p\n", __func__, entry); + } + + return entry; +} + +void verify_ram() +{ + struct hash_entry *current_entry = (struct hash_entry *)HASH_BUFFER; + struct hash_range *range; + unsigned int i; + + printk(BIOS_INFO, "%s: Start: HASH_BUFFER: %#x, EHASH_BUFFER: %#x\n", __func__, + HASH_BUFFER, EHASH_BUFFER); + + for (i = 0; i < ARRAY_SIZE(mem_layout); ++i) { + range = &mem_layout[i]; + printk(BIOS_DEBUG, "%s: Verifying range %p -> %p\n", __func__, + (void *)range->start, (void *)range->end); + current_entry = + verify_range(range, current_entry, + ((uintptr_t)EHASH_BUFFER - (uintptr_t)current_entry)); + + if (!current_entry) { + printk(BIOS_ERR, "%s: Hash buffer is too small\n", __func__); + break; + } + } + + printk(BIOS_INFO, "%s: Done\n", __func__); +} diff --git a/src/soc/amd/picasso/chip.c b/src/soc/amd/picasso/chip.c index 2abe54e..678ce03 100644 --- a/src/soc/amd/picasso/chip.c +++ b/src/soc/amd/picasso/chip.c @@ -14,6 +14,7 @@ #include <soc/southbridge.h> #include "chip.h" #include <fsp/api.h> +#include <ram_hash.h> /* Supplied by i2c.c */ extern struct device_operations picasso_i2c_mmio_ops; @@ -184,6 +185,7 @@ static void picasso_os_entry(void *unused) { picasso_disable_paging(NULL); + verify_ram(); } struct chip_operations soc_amd_picasso_ops = { diff --git a/src/soc/amd/picasso/memlayout.ld b/src/soc/amd/picasso/memlayout.ld index 27c72a2..a128019 100644 --- a/src/soc/amd/picasso/memlayout.ld +++ b/src/soc/amd/picasso/memlayout.ld @@ -92,6 +92,7 @@ REGION(pagetables, CONFIG_PAGE_TABLE_ADDR, 4096 * 12, 8) REGION(pdpt, ., 32, 32) + REGION(hash_buffer, 0x2BD000, 1M, 4) EARLY_RESERVED_DRAM_END(.) RAMSTAGE(CONFIG_RAMBASE, 8M) diff --git a/src/soc/amd/picasso/smihandler.c b/src/soc/amd/picasso/smihandler.c index 992dc2b..616f116 100644 --- a/src/soc/amd/picasso/smihandler.c +++ b/src/soc/amd/picasso/smihandler.c @@ -3,6 +3,7 @@ #include <arch/io.h> #include <console/console.h> #include <cpu/x86/smm.h> +#include <ram_hash.h> #include <cpu/x86/cache.h> #include <cpu/amd/amd64_save_state.h> #include <acpi/acpi.h> @@ -144,6 +145,13 @@ printk(BIOS_SPEW, "SMI#: SLP = 0x%04x\n", pm1cnt); slp_typ = acpi_sleep_from_pm1(pm1cnt); + /* + * Hash RAM as soon as we know we are entering S3 to catch any problems + * caused by the SMM handler, PSP, or SMU. + */ + if (slp_typ == ACPI_S3) + hash_ram(); + /* Do any mainboard sleep handling */ mainboard_smi_sleep(slp_typ); -- To view, visit https://review.coreboot.org/c/coreboot/+/42890 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I6b38facba17bdd57a94987cfb49e71067ff8b769 Gerrit-Change-Number: 42890 Gerrit-PatchSet: 1 Gerrit-Owner: Raul Rangel <rrangel(a)chromium.org> Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

3 8

Change in coreboot[master]: WIP: lib: Add murmur3 algorithm for RAM hash
by Raul Rangel (Code Review) 07 Aug '23

07 Aug '23

Raul Rangel has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/43301 ) Change subject: WIP: lib: Add murmur3 algorithm for RAM hash ...................................................................... WIP: lib: Add murmur3 algorithm for RAM hash This is the murmur3 algorithm from https://github.com/PeterScott/murmur3. I'm not sure we can even include this since it's public domain. We might need to use another hash algorithm. I picked it because it's supposed to be fast. I didn't cleanup the code at all. This is why -Wno-implicit-fallthrough was added to the CFLAGS. BUG=b:159081993 TEST=Suspend trembyle and see hashes being generated. Signed-off-by: Raul E Rangel <rrangel(a)chromium.org> Change-Id: I9dfd371c67966bf7a342fdb5562445e63afce664 --- M Makefile.inc A src/include/murmur3.h M src/lib/Kconfig M src/lib/Makefile.inc A src/lib/murmur3.c A src/lib/ram_hash_murmur.c 6 files changed, 362 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/01/43301/1 diff --git a/Makefile.inc b/Makefile.inc index 89bb3e4..9b39b39 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -421,7 +421,7 @@ CFLAGS_common += -Wstrict-aliasing -Wshadow -Wdate-time -Wtype-limits -Wvla CFLAGS_common += -Wlogical-op -Wduplicated-cond -Wdangling-else CFLAGS_common += -fno-common -ffreestanding -fno-builtin -fomit-frame-pointer -CFLAGS_common += -ffunction-sections -fdata-sections -fno-pie +CFLAGS_common += -ffunction-sections -fdata-sections -fno-pie -Wno-implicit-fallthrough ifeq ($(CONFIG_COMPILER_GCC),y) # Don't add these GCC specific flags when running scan-build ifeq ($(CCC_ANALYZER_OUTPUT_FORMAT),) diff --git a/src/include/murmur3.h b/src/include/murmur3.h new file mode 100644 index 0000000..138f87f --- /dev/null +++ b/src/include/murmur3.h @@ -0,0 +1,29 @@ +//----------------------------------------------------------------------------- +// MurmurHash3 was written by Austin Appleby, and is placed in the +// public domain. The author hereby disclaims copyright to this source +// code. + +#ifndef _MURMURHASH3_H_ +#define _MURMURHASH3_H_ + +#include <stdint.h> + +#ifdef __cplusplus +extern "C" { +#endif + +//----------------------------------------------------------------------------- + +void MurmurHash3_x86_32 (const void *key, int len, uint32_t seed, uint32_t *out); + +void MurmurHash3_x86_128(const void *key, int len, uint32_t seed, void *out); + +void MurmurHash3_x64_128(const void *key, int len, uint32_t seed, void *out); + +//----------------------------------------------------------------------------- + +#ifdef __cplusplus +} +#endif + +#endif // _MURMURHASH3_H_ diff --git a/src/lib/Kconfig b/src/lib/Kconfig index 8eeceec..0e4fa88 100644 --- a/src/lib/Kconfig +++ b/src/lib/Kconfig @@ -111,6 +111,8 @@ depends on ENABLE_RAM_HASH help The hash algorithm to use for RAM hash. -# TODO: Add algorithms + +config RAM_HASH_ALGO_MURMUR3 + bool "murmur3" endchoice diff --git a/src/lib/Makefile.inc b/src/lib/Makefile.inc index 05df3c6..54b23e2 100644 --- a/src/lib/Makefile.inc +++ b/src/lib/Makefile.inc @@ -148,6 +148,9 @@ ramstage-$(CONFIG_ENABLE_RAM_HASH) += ram_hash.c smm-$(CONFIG_ENABLE_RAM_HASH) += ram_hash.c +ramstage-$(CONFIG_RAM_HASH_ALGO_MURMUR3) += ram_hash_murmur.c murmur3.c +smm-$(CONFIG_RAM_HASH_ALGO_MURMUR3) += ram_hash_murmur.c murmur3.c + postcar-$(CONFIG_VENDOR_EMULATION) += ramdetect.c postcar-y += cbmem_common.c postcar-$(CONFIG_CONSOLE_CBMEM) += cbmem_console.c diff --git a/src/lib/murmur3.c b/src/lib/murmur3.c new file mode 100644 index 0000000..f2b6b18 --- /dev/null +++ b/src/lib/murmur3.c @@ -0,0 +1,314 @@ +//----------------------------------------------------------------------------- +// MurmurHash3 was written by Austin Appleby, and is placed in the public +// domain. The author hereby disclaims copyright to this source code. + +// Note - The x86 and x64 versions do _not_ produce the same results, as the +// algorithms are optimized for their respective platforms. You can still +// compile and run any of them on any platform, but your performance with the +// non-native version will be less than optimal. + +#include "murmur3.h" + +//----------------------------------------------------------------------------- +// Platform-specific functions and macros + +#ifdef __GNUC__ +#define FORCE_INLINE __attribute__((always_inline)) inline +#else +#define FORCE_INLINE inline +#endif + +static FORCE_INLINE uint32_t rotl32 ( uint32_t x, int8_t r ) +{ + return (x << r) | (x >> (32 - r)); +} + +static FORCE_INLINE uint64_t rotl64 ( uint64_t x, int8_t r ) +{ + return (x << r) | (x >> (64 - r)); +} + +#define ROTL32(x,y) rotl32(x,y) +#define ROTL64(x,y) rotl64(x,y) + +#define BIG_CONSTANT(x) (x##LLU) + +//----------------------------------------------------------------------------- +// Block read - if your platform needs to do endian-swapping or can only +// handle aligned reads, do the conversion here + +#define getblock(p, i) (p[i]) + +//----------------------------------------------------------------------------- +// Finalization mix - force all bits of a hash block to avalanche + +static FORCE_INLINE uint32_t fmix32 ( uint32_t h ) +{ + h ^= h >> 16; + h *= 0x85ebca6b; + h ^= h >> 13; + h *= 0xc2b2ae35; + h ^= h >> 16; + + return h; +} + +//---------- + +static FORCE_INLINE uint64_t fmix64 ( uint64_t k ) +{ + k ^= k >> 33; + k *= BIG_CONSTANT(0xff51afd7ed558ccd); + k ^= k >> 33; + k *= BIG_CONSTANT(0xc4ceb9fe1a85ec53); + k ^= k >> 33; + + return k; +} + +//----------------------------------------------------------------------------- + +void MurmurHash3_x86_32 ( const void * key, int len, + uint32_t seed, uint32_t * out ) +{ + const uint8_t * data = (const uint8_t*)key; + const int nblocks = len / 4; + int i; + + uint32_t h1 = seed; + + uint32_t c1 = 0xcc9e2d51; + uint32_t c2 = 0x1b873593; + + //---------- + // body + + const uint32_t * blocks = (const uint32_t *)(data + nblocks*4); + + for(i = -nblocks; i; i++) + { + uint32_t k1 = getblock(blocks,i); + + k1 *= c1; + k1 = ROTL32(k1,15); + k1 *= c2; + + h1 ^= k1; + h1 = ROTL32(h1,13); + h1 = h1*5+0xe6546b64; + } + + //---------- + // tail + + const uint8_t * tail = (const uint8_t*)(data + nblocks*4); + + uint32_t k1 = 0; + + switch(len & 3) + { + case 3: k1 ^= tail[2] << 16; + case 2: k1 ^= tail[1] << 8; + case 1: k1 ^= tail[0]; + k1 *= c1; k1 = ROTL32(k1,15); k1 *= c2; h1 ^= k1; + }; + + //---------- + // finalization + + h1 ^= len; + + h1 = fmix32(h1); + + *(uint32_t*)out = h1; +} + +//----------------------------------------------------------------------------- + +void MurmurHash3_x86_128 ( const void * key, const int len, + uint32_t seed, void * out ) +{ + const uint8_t * data = (const uint8_t*)key; + const int nblocks = len / 16; + int i; + + uint32_t h1 = seed; + uint32_t h2 = seed; + uint32_t h3 = seed; + uint32_t h4 = seed; + + uint32_t c1 = 0x239b961b; + uint32_t c2 = 0xab0e9789; + uint32_t c3 = 0x38b34ae5; + uint32_t c4 = 0xa1e38b93; + + //---------- + // body + + const uint32_t * blocks = (const uint32_t *)(data + nblocks*16); + + for(i = -nblocks; i; i++) + { + uint32_t k1 = getblock(blocks,i*4+0); + uint32_t k2 = getblock(blocks,i*4+1); + uint32_t k3 = getblock(blocks,i*4+2); + uint32_t k4 = getblock(blocks,i*4+3); + + k1 *= c1; k1 = ROTL32(k1,15); k1 *= c2; h1 ^= k1; + + h1 = ROTL32(h1,19); h1 += h2; h1 = h1*5+0x561ccd1b; + + k2 *= c2; k2 = ROTL32(k2,16); k2 *= c3; h2 ^= k2; + + h2 = ROTL32(h2,17); h2 += h3; h2 = h2*5+0x0bcaa747; + + k3 *= c3; k3 = ROTL32(k3,17); k3 *= c4; h3 ^= k3; + + h3 = ROTL32(h3,15); h3 += h4; h3 = h3*5+0x96cd1c35; + + k4 *= c4; k4 = ROTL32(k4,18); k4 *= c1; h4 ^= k4; + + h4 = ROTL32(h4,13); h4 += h1; h4 = h4*5+0x32ac3b17; + } + + //---------- + // tail + + const uint8_t * tail = (const uint8_t*)(data + nblocks*16); + + uint32_t k1 = 0; + uint32_t k2 = 0; + uint32_t k3 = 0; + uint32_t k4 = 0; + + switch(len & 15) + { + case 15: k4 ^= tail[14] << 16; + case 14: k4 ^= tail[13] << 8; + case 13: k4 ^= tail[12] << 0; + k4 *= c4; k4 = ROTL32(k4,18); k4 *= c1; h4 ^= k4; + + case 12: k3 ^= tail[11] << 24; + case 11: k3 ^= tail[10] << 16; + case 10: k3 ^= tail[ 9] << 8; + case 9: k3 ^= tail[ 8] << 0; + k3 *= c3; k3 = ROTL32(k3,17); k3 *= c4; h3 ^= k3; + + case 8: k2 ^= tail[ 7] << 24; + case 7: k2 ^= tail[ 6] << 16; + case 6: k2 ^= tail[ 5] << 8; + case 5: k2 ^= tail[ 4] << 0; + k2 *= c2; k2 = ROTL32(k2,16); k2 *= c3; h2 ^= k2; + + case 4: k1 ^= tail[ 3] << 24; + case 3: k1 ^= tail[ 2] << 16; + case 2: k1 ^= tail[ 1] << 8; + case 1: k1 ^= tail[ 0] << 0; + k1 *= c1; k1 = ROTL32(k1,15); k1 *= c2; h1 ^= k1; + }; + + //---------- + // finalization + + h1 ^= len; h2 ^= len; h3 ^= len; h4 ^= len; + + h1 += h2; h1 += h3; h1 += h4; + h2 += h1; h3 += h1; h4 += h1; + + h1 = fmix32(h1); + h2 = fmix32(h2); + h3 = fmix32(h3); + h4 = fmix32(h4); + + h1 += h2; h1 += h3; h1 += h4; + h2 += h1; h3 += h1; h4 += h1; + + ((uint32_t*)out)[0] = h1; + ((uint32_t*)out)[1] = h2; + ((uint32_t*)out)[2] = h3; + ((uint32_t*)out)[3] = h4; +} + +//----------------------------------------------------------------------------- + +void MurmurHash3_x64_128 ( const void * key, const int len, + const uint32_t seed, void * out ) +{ + const uint8_t * data = (const uint8_t*)key; + const int nblocks = len / 16; + int i; + + uint64_t h1 = seed; + uint64_t h2 = seed; + + uint64_t c1 = BIG_CONSTANT(0x87c37b91114253d5); + uint64_t c2 = BIG_CONSTANT(0x4cf5ad432745937f); + + //---------- + // body + + const uint64_t * blocks = (const uint64_t *)(data); + + for(i = 0; i < nblocks; i++) + { + uint64_t k1 = getblock(blocks,i*2+0); + uint64_t k2 = getblock(blocks,i*2+1); + + k1 *= c1; k1 = ROTL64(k1,31); k1 *= c2; h1 ^= k1; + + h1 = ROTL64(h1,27); h1 += h2; h1 = h1*5+0x52dce729; + + k2 *= c2; k2 = ROTL64(k2,33); k2 *= c1; h2 ^= k2; + + h2 = ROTL64(h2,31); h2 += h1; h2 = h2*5+0x38495ab5; + } + + //---------- + // tail + + const uint8_t * tail = (const uint8_t*)(data + nblocks*16); + + uint64_t k1 = 0; + uint64_t k2 = 0; + + switch(len & 15) + { + case 15: k2 ^= (uint64_t)(tail[14]) << 48; + case 14: k2 ^= (uint64_t)(tail[13]) << 40; + case 13: k2 ^= (uint64_t)(tail[12]) << 32; + case 12: k2 ^= (uint64_t)(tail[11]) << 24; + case 11: k2 ^= (uint64_t)(tail[10]) << 16; + case 10: k2 ^= (uint64_t)(tail[ 9]) << 8; + case 9: k2 ^= (uint64_t)(tail[ 8]) << 0; + k2 *= c2; k2 = ROTL64(k2,33); k2 *= c1; h2 ^= k2; + + case 8: k1 ^= (uint64_t)(tail[ 7]) << 56; + case 7: k1 ^= (uint64_t)(tail[ 6]) << 48; + case 6: k1 ^= (uint64_t)(tail[ 5]) << 40; + case 5: k1 ^= (uint64_t)(tail[ 4]) << 32; + case 4: k1 ^= (uint64_t)(tail[ 3]) << 24; + case 3: k1 ^= (uint64_t)(tail[ 2]) << 16; + case 2: k1 ^= (uint64_t)(tail[ 1]) << 8; + case 1: k1 ^= (uint64_t)(tail[ 0]) << 0; + k1 *= c1; k1 = ROTL64(k1,31); k1 *= c2; h1 ^= k1; + }; + + //---------- + // finalization + + h1 ^= len; h2 ^= len; + + h1 += h2; + h2 += h1; + + h1 = fmix64(h1); + h2 = fmix64(h2); + + h1 += h2; + h2 += h1; + + ((uint64_t*)out)[0] = h1; + ((uint64_t*)out)[1] = h2; +} + +//----------------------------------------------------------------------------- diff --git a/src/lib/ram_hash_murmur.c b/src/lib/ram_hash_murmur.c new file mode 100644 index 0000000..4f6ac9b --- /dev/null +++ b/src/lib/ram_hash_murmur.c @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <stdint.h> +#include <murmur3.h> +#include <ram_hash.h> + +uint32_t generate_hash(const void *buffer, unsigned int size) +{ + uint32_t hash; + MurmurHash3_x86_32(buffer, size, 0xDEADBEEF, &hash); + return hash; +} -- To view, visit https://review.coreboot.org/c/coreboot/+/43301 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I9dfd371c67966bf7a342fdb5562445e63afce664 Gerrit-Change-Number: 43301 Gerrit-PatchSet: 1 Gerrit-Owner: Raul Rangel <rrangel(a)chromium.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

4 6

Change in coreboot[master]: soc/amd/picasso: Add support for RAM hash
by Raul Rangel (Code Review) 07 Aug '23

07 Aug '23

Raul Rangel has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/43302 ) Change subject: soc/amd/picasso: Add support for RAM hash ...................................................................... soc/amd/picasso: Add support for RAM hash This CL allocates a region in EARLY_DRAM to store the RAM hashes. It also introduces a hard coded memory map based on the current e820 map. In the future we could maybe automate the generate of the hash_ranges. Until now we will need to keep it updated. To enable, add the following to your .config: CONFIG_ENABLE_RAM_HASH=y Hashing RAM from the SMM handler is pretty slow compared to trying it in bootblock. Not sure if the OS has reset the MTRRs. Example of entering S3: coreboot-4.12-1163-gd9cc83a4ce58-dirty Tue Jul 7 21:34:13 UTC 2020 smm starting (log level: 8)... SMI# #0 SMI#: SLP = 0x0c01 hash_ram: Start for_each_range: Processing range 0x1000 -> 0xa0000 Processed block 128: crc: 0x7f00c996. Remaining: 0 MiB Processed block 256: crc: 0x7f00c996. Remaining: 0 MiB Processed block 384: crc: 0x7f00c996. Remaining: 0 MiB Processed block 512: crc: 0x7f00c996. Remaining: 0 MiB for_each_range: Processing range 0x100000 -> 0x2000000 for_each_range: Processing range 0x22cd000 -> 0xcc50c000 Processed block 128: crc: 0x9a22c19c. Remaining: 3107 MiB Processed block 256: crc: 0x9a22c19c. Remaining: 2979 MiB Processed block 384: crc: 0x9a22c19c. Remaining: 2851 MiB ... Example of exiting S3: Timestamp - ACPI wake jump: 36887335255 verify_ram: Start for_each_range: Processing range 0x1000 -> 0xa0000 Processed block 128: crc: 0x7f00c996. Remaining: 0 MiB Processed block 256: crc: 0x7f00c996. Remaining: 0 MiB Processed block 384: crc: 0x7f00c996. Remaining: 0 MiB Processed block 512: crc: 0x7f00c996. Remaining: 0 MiB for_each_range: Processing range 0x100000 -> 0x2000000 for_each_range: Processing range 0x22cd000 -> 0xcc50c000 Processed block 128: crc: 0x9a22c19c. Remaining: 3107 MiB Processed block 256: crc: 0x9a22c19c. Remaining: 2979 MiB Processed block 384: crc: 0x9a22c19c. Remaining: 2851 MiB Processed block 512: crc: 0x9a22c19c. Remaining: 2723 MiB Processed block 640: crc: 0x9a22c19c. Remaining: 2595 MiB Processed block 768: crc: 0x9a22c19c. Remaining: 2467 MiB Processed block 896: crc: 0x9a22c19c. Remaining: 2339 MiB Processed block 1024: crc: 0x9a22c19c. Remaining: 2211 MiB Processed block 1152: crc: 0x9a22c19c. Remaining: 2083 MiB Processed block 1280: crc: 0x9a22c19c. Remaining: 1955 MiB Processed block 1408: crc: 0x9a22c19c. Remaining: 1827 MiB Processed block 1536: crc: 0x9a22c19c. Remaining: 1699 MiB Processed block 1664: crc: 0x9a22c19c. Remaining: 1571 MiB Processed block 1792: crc: 0x9a22c19c. Remaining: 1443 MiB Processed block 1920: crc: 0x9a22c19c. Remaining: 1315 MiB Processed block 2048: crc: 0x9a22c19c. Remaining: 1187 MiB Processed block 2176: crc: 0x9a22c19c. Remaining: 1059 MiB Processed block 2304: crc: 0x9a22c19c. Remaining: 931 MiB Processed block 2432: crc: 0x9a22c19c. Remaining: 803 MiB Processed block 2560: crc: 0x9a22c19c. Remaining: 675 MiB Processed block 2688: crc: 0x9a22c19c. Remaining: 547 MiB Processed block 2816: crc: 0x9a22c19c. Remaining: 419 MiB Processed block 2944: crc: 0x9a22c19c. Remaining: 291 MiB Processed block 3072: crc: 0x9a22c19c. Remaining: 163 MiB Processed block 3200: crc: 0x9a22c19c. Remaining: 35 MiB verify_ram: Done BUG=b:159081993 TEST=S3 suspend and resume on trembyle Signed-off-by: Raul E Rangel <rrangel(a)chromium.org> Change-Id: Ia9b80044dd794ddfb0b661d517367259917cd944 --- M src/soc/amd/picasso/Kconfig M src/soc/amd/picasso/Makefile.inc M src/soc/amd/picasso/memlayout.ld A src/soc/amd/picasso/ram_hash.c M src/soc/amd/picasso/smihandler.c 5 files changed, 65 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/02/43302/1 diff --git a/src/soc/amd/picasso/Kconfig b/src/soc/amd/picasso/Kconfig index fd2a205..2e7ce89 100644 --- a/src/soc/amd/picasso/Kconfig +++ b/src/soc/amd/picasso/Kconfig @@ -57,6 +57,7 @@ select HAVE_CF9_RESET select SUPPORT_CPU_UCODE_IN_CBFS select ACPI_NO_SMI_GNVS + select HAS_RAM_HASH config MEMLAYOUT_LD_FILE string @@ -174,6 +175,20 @@ Sets the size of DRAM allocation for verstage in linker script if running as a separate stage on x86. +config RAM_HASH_ADDR + hex + depends on ENABLE_RAM_HASH + default 0x21CD000 + help + Where in memory to store the hashes. + +config RAM_HASH_SIZE + hex + depends on ENABLE_RAM_HASH + default 0x100000 + help + Size of the RAM_HASH buffer. + config RAMBASE hex default 0x10000000 diff --git a/src/soc/amd/picasso/Makefile.inc b/src/soc/amd/picasso/Makefile.inc index 39269e9..679ee98 100644 --- a/src/soc/amd/picasso/Makefile.inc +++ b/src/soc/amd/picasso/Makefile.inc @@ -89,6 +89,9 @@ smm-y += smu.c smm-y += config.c +ramstage-$(CONFIG_ENABLE_RAM_HASH) += ram_hash.c +smm-$(CONFIG_ENABLE_RAM_HASH) += ram_hash.c + CPPFLAGS_common += -I$(src)/soc/amd/picasso CPPFLAGS_common += -I$(src)/soc/amd/picasso/include CPPFLAGS_common += -I$(src)/soc/amd/picasso/acpi diff --git a/src/soc/amd/picasso/memlayout.ld b/src/soc/amd/picasso/memlayout.ld index 6f43ba1..bb15263 100644 --- a/src/soc/amd/picasso/memlayout.ld +++ b/src/soc/amd/picasso/memlayout.ld @@ -89,6 +89,10 @@ VERSTAGE(CONFIG_VERSTAGE_ADDR, CONFIG_VERSTAGE_SIZE) #endif +#if CONFIG(ENABLE_RAM_HASH) + REGION(hash_buffer, 0x21CD000, 1M, 4) +#endif + EARLY_RESERVED_DRAM_END(.) RAMSTAGE(CONFIG_RAMBASE, 8M) diff --git a/src/soc/amd/picasso/ram_hash.c b/src/soc/amd/picasso/ram_hash.c new file mode 100644 index 0000000..c7f0be4 --- /dev/null +++ b/src/soc/amd/picasso/ram_hash.c @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <stdint.h> +#include <ram_hash.h> +#include <commonlib/bsd/helpers.h> + +struct hash_range mem_layout[] = { + { + .start = 0x1000, + .end = 0xa0000, + .block_size = 1 * KiB, + .diff = 1 + }, + { + .start = 0x100000, + .end = 0x2000000, + .block_size = 1 * MiB, + .diff = 0 + }, + { + .start = 0x22cd000, + .end = 0xcc50c000, + .block_size = 1 * MiB, + .diff = 0 + }, +}; + +void soc_hash_ram(void) +{ + hash_ram(mem_layout, ARRAY_SIZE(mem_layout)); +} +void soc_verify_ram(void) +{ + verify_ram(mem_layout, ARRAY_SIZE(mem_layout)); +} diff --git a/src/soc/amd/picasso/smihandler.c b/src/soc/amd/picasso/smihandler.c index 7e762a9..6832526 100644 --- a/src/soc/amd/picasso/smihandler.c +++ b/src/soc/amd/picasso/smihandler.c @@ -3,6 +3,7 @@ #include <arch/io.h> #include <console/console.h> #include <cpu/x86/smm.h> +#include <ram_hash.h> #include <cpu/x86/cache.h> #include <cpu/amd/amd64_save_state.h> #include <acpi/acpi.h> @@ -144,6 +145,13 @@ printk(BIOS_SPEW, "SMI#: SLP = 0x%04x\n", pm1cnt); slp_typ = acpi_sleep_from_pm1(pm1cnt); + /* + * Hash RAM as soon as we know we are entering S3 to catch any problems + * caused by the SMM handler, PSP, or SMU. + */ + if (slp_typ == ACPI_S3) + soc_hash_ram(); + /* Do any mainboard sleep handling */ mainboard_smi_sleep(slp_typ); -- To view, visit https://review.coreboot.org/c/coreboot/+/43302 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ia9b80044dd794ddfb0b661d517367259917cd944 Gerrit-Change-Number: 43302 Gerrit-PatchSet: 1 Gerrit-Owner: Raul Rangel <rrangel(a)chromium.org> Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

2 3

Change in ...coreboot[master]: nb/intel/sandybridge: Introduce soc/iomap.h
by Patrick Rudolph (Code Review) 07 Aug '23

07 Aug '23

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32075 Change subject: nb/intel/sandybridge: Introduce soc/iomap.h ...................................................................... nb/intel/sandybridge: Introduce soc/iomap.h Defines the memory ranges used by the northbridge in a separate header. Include the new header and rename the defines to match the one found in soc/intel/common. Change-Id: I93aa0e78ff52e46256debd26601600a96404509f Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/northbridge/intel/sandybridge/Makefile.inc M src/northbridge/intel/sandybridge/acpi.c M src/northbridge/intel/sandybridge/early_init.c A src/northbridge/intel/sandybridge/include/soc/iomap.h M src/northbridge/intel/sandybridge/northbridge.c M src/northbridge/intel/sandybridge/raminit_common.c M src/northbridge/intel/sandybridge/raminit_mrc.c M src/northbridge/intel/sandybridge/sandybridge.h 8 files changed, 92 insertions(+), 54 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/75/32075/1 diff --git a/src/northbridge/intel/sandybridge/Makefile.inc b/src/northbridge/intel/sandybridge/Makefile.inc index 54a4057..c3d9079 100644 --- a/src/northbridge/intel/sandybridge/Makefile.inc +++ b/src/northbridge/intel/sandybridge/Makefile.inc @@ -15,6 +15,8 @@ ifeq ($(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE)$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE),y) +CFLAGS_common += -Isrc/northbridge/intel/sandybridge/include + ramstage-y += ram_calc.c ramstage-y += northbridge.c ramstage-y += pcie.c diff --git a/src/northbridge/intel/sandybridge/acpi.c b/src/northbridge/intel/sandybridge/acpi.c index 4afb546..af2f37b 100644 --- a/src/northbridge/intel/sandybridge/acpi.c +++ b/src/northbridge/intel/sandybridge/acpi.c @@ -92,7 +92,8 @@ unsigned long tmp; tmp = current; - current += acpi_create_dmar_drhd(current, 0, 0, IOMMU_BASE1); + current += acpi_create_dmar_drhd(current, 0, 0, + GFXVT_BASE_ADDRESS); current += acpi_create_dmar_ds_pci(current, 0, 2, 0); current += acpi_create_dmar_ds_pci(current, 0, 2, 1); acpi_dmar_drhd_fixup(tmp, current); @@ -107,8 +108,8 @@ } const unsigned long tmp = current; - current += acpi_create_dmar_drhd(current, - DRHD_INCLUDE_PCI_ALL, 0, IOMMU_BASE2); + current += acpi_create_dmar_drhd(current, DRHD_INCLUDE_PCI_ALL, 0, + VTVC0_BASE_ADDRESS); current += acpi_create_dmar_ds_ioapic(current, 2, PCH_IOAPIC_PCI_BUS, PCH_IOAPIC_PCI_SLOT, 0); size_t i; diff --git a/src/northbridge/intel/sandybridge/early_init.c b/src/northbridge/intel/sandybridge/early_init.c index 5307a2c..2e0f087 100644 --- a/src/northbridge/intel/sandybridge/early_init.c +++ b/src/northbridge/intel/sandybridge/early_init.c @@ -35,20 +35,20 @@ return; /* setup BARs */ - MCHBAR32(0x5404) = IOMMU_BASE1 >> 32; - MCHBAR32(0x5400) = IOMMU_BASE1 | 1; - MCHBAR32(0x5414) = IOMMU_BASE2 >> 32; - MCHBAR32(0x5410) = IOMMU_BASE2 | 1; + MCHBAR32(0x5404) = GFXVT_BASE_ADDRESS >> 32; + MCHBAR32(0x5400) = GFXVT_BASE_ADDRESS | 1; + MCHBAR32(0x5414) = VTVC0_BASE_ADDRESS >> 32; + MCHBAR32(0x5410) = VTVC0_BASE_ADDRESS | 1; /* lock policies */ - write32((void *)(IOMMU_BASE1 + 0xff0), 0x80000000); + write32((void *)(GFXVT_BASE_ADDRESS + 0xff0), 0x80000000); const struct device *const azalia = pcidev_on_root(0x1b, 0); if (azalia && azalia->enabled) { - write32((void *)(IOMMU_BASE2 + 0xff0), 0x20000000); - write32((void *)(IOMMU_BASE2 + 0xff0), 0xa0000000); + write32((void *)(VTVC0_BASE_ADDRESS + 0xff0), 0x20000000); + write32((void *)(VTVC0_BASE_ADDRESS + 0xff0), 0xa0000000); } else { - write32((void *)(IOMMU_BASE2 + 0xff0), 0x80000000); + write32((void *)(VTVC0_BASE_ADDRESS + 0xff0), 0x80000000); } } @@ -67,12 +67,12 @@ { printk(BIOS_DEBUG, "Setting up static northbridge registers..."); /* Set up all hardcoded northbridge BARs */ - pci_write_config32(PCI_DEV(0, 0x00, 0), EPBAR, DEFAULT_EPBAR | 1); - pci_write_config32(PCI_DEV(0, 0x00, 0), EPBAR + 4, (0LL+DEFAULT_EPBAR) >> 32); - pci_write_config32(PCI_DEV(0, 0x00, 0), MCHBAR, (uintptr_t)DEFAULT_MCHBAR | 1); - pci_write_config32(PCI_DEV(0, 0x00, 0), MCHBAR + 4, (0LL+(uintptr_t)DEFAULT_MCHBAR) >> 32); - pci_write_config32(PCI_DEV(0, 0x00, 0), DMIBAR, (uintptr_t)DEFAULT_DMIBAR | 1); - pci_write_config32(PCI_DEV(0, 0x00, 0), DMIBAR + 4, (0LL+(uintptr_t)DEFAULT_DMIBAR) >> 32); + pci_write_config32(PCI_DEV(0, 0x00, 0), EPBAR, EP_BASE_ADDRESS | 1); + pci_write_config32(PCI_DEV(0, 0x00, 0), EPBAR + 4, EP_BASE_ADDRESS >> 32); + pci_write_config32(PCI_DEV(0, 0x00, 0), MCHBAR, MCH_BASE_ADDRESS | 1); + pci_write_config32(PCI_DEV(0, 0x00, 0), MCHBAR + 4, MCH_BASE_ADDRESS >> 32); + pci_write_config32(PCI_DEV(0, 0x00, 0), DMIBAR, DMI_BASE_ADDRESS | 1); + pci_write_config32(PCI_DEV(0, 0x00, 0), DMIBAR + 4, DMI_BASE_ADDRESS >> 32); printk(BIOS_DEBUG, " done\n"); } diff --git a/src/northbridge/intel/sandybridge/include/soc/iomap.h b/src/northbridge/intel/sandybridge/include/soc/iomap.h new file mode 100644 index 0000000..75fd9d9 --- /dev/null +++ b/src/northbridge/intel/sandybridge/include/soc/iomap.h @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _SOC_SANDYBRIDGE_IOMAP_H_ +#define _SOC_SANDYBRIDGE_IOMAP_H_ + +/* + * Memory-mapped I/O registers. + */ +#define MCFG_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS +#define MCFG_BASE_SIZE 0x4000000 + +/* Intel Enhanced Debug region must be 4MB */ + +#define IED_SIZE CONFIG_IED_REGION_SIZE + +#define ILB_BASE_ADDRESS 0xfed08000ULL +#define ILB_BASE_SIZE 0x400 + +#define DMI_BASE_ADDRESS 0xfed18000ULL +#define DMI_BASE_SIZE 0x1000 + +#define MCH_BASE_ADDRESS 0xfed10000ULL +#define MCH_BASE_SIZE 0x4000 + +#define EP_BASE_ADDRESS 0xfed19000ULL +#define EP_BASE_SIZE 0x1000 + +#define GFXVT_BASE_ADDRESS 0xfed90000ULL +#define GFXVT_BASE_SIZE 0x1000 + +#define VTVC0_BASE_ADDRESS 0xfed91000ULL +#define VTVC0_BASE_SIZE 0x1000 + +#define TPM_BASE_ADDRESS 0xfed40000ULL +#define TPM_BASE_SIZE 0x5000 + + +#endif diff --git a/src/northbridge/intel/sandybridge/northbridge.c b/src/northbridge/intel/sandybridge/northbridge.c index 5aa06c8..71dea62 100644 --- a/src/northbridge/intel/sandybridge/northbridge.c +++ b/src/northbridge/intel/sandybridge/northbridge.c @@ -112,8 +112,8 @@ /* Reserve IOMMU BARs */ const u32 capid0_a = pci_read_config32(dev, 0xe4); if (!(capid0_a & (1 << 23))) { - mmio_resource(dev, index++, IOMMU_BASE1 >> 10, 4); - mmio_resource(dev, index++, IOMMU_BASE2 >> 10, 4); + mmio_resource(dev, index++, GFXVT_BASE_ADDRESS / KiB, 4); + mmio_resource(dev, index++, VTVC0_BASE_ADDRESS / KiB, 4); } } diff --git a/src/northbridge/intel/sandybridge/raminit_common.c b/src/northbridge/intel/sandybridge/raminit_common.c index 55df03b..72ae5b0 100644 --- a/src/northbridge/intel/sandybridge/raminit_common.c +++ b/src/northbridge/intel/sandybridge/raminit_common.c @@ -41,23 +41,23 @@ * Channel X = [0, 1] * Command queue index Y = [0, 1, 2, 3] * - * DEFAULT_MCHBAR + 0x4220 + 0x400 * X + 4 * Y: command io register + * MCH_BASE_ADDRESS + 0x4220 + 0x400 * X + 4 * Y: command io register * Controls the DRAM command signals * Bit 0: !RAS * Bit 1: !CAS * Bit 2: !WE * - * DEFAULT_MCHBAR + 0x4200 + 0x400 * X + 4 * Y: addr bankslot io register + * MCH_BASE_ADDRESS + 0x4200 + 0x400 * X + 4 * Y: addr bankslot io register * Controls the address, bank address and slotrank signals * Bit 0-15 : Address * Bit 20-22: Bank Address * Bit 24-25: slotrank * - * DEFAULT_MCHBAR + 0x4230 + 0x400 * X + 4 * Y: idle register + * MCH_BASE_ADDRESS + 0x4230 + 0x400 * X + 4 * Y: idle register * Controls the idle time after issuing this DRAM command * Bit 16-32: number of clock-cylces to idle * - * DEFAULT_MCHBAR + 0x4284 + 0x400 * channel: execute command queue + * MCH_BASE_ADDRESS + 0x4284 + 0x400 * channel: execute command queue * Starts to execute all queued commands * Bit 0 : start DRAM command execution * Bit 18-19 : number of queued commands - 1 diff --git a/src/northbridge/intel/sandybridge/raminit_mrc.c b/src/northbridge/intel/sandybridge/raminit_mrc.c index c544a74..2382084 100644 --- a/src/northbridge/intel/sandybridge/raminit_mrc.c +++ b/src/northbridge/intel/sandybridge/raminit_mrc.c @@ -277,10 +277,10 @@ static void northbridge_fill_pei_data(struct pei_data *pei_data) { - pei_data->mchbar = (uintptr_t)DEFAULT_MCHBAR; - pei_data->dmibar = (uintptr_t)DEFAULT_DMIBAR; - pei_data->epbar = DEFAULT_EPBAR; - pei_data->pciexbar = CONFIG_MMCONF_BASE_ADDRESS; + pei_data->mchbar = MCH_BASE_ADDRESS; + pei_data->dmibar = DMI_BASE_ADDRESS; + pei_data->epbar = EP_BASE_ADDRESS; + pei_data->pciexbar = MCFG_BASE_ADDRESS; pei_data->smbusbar = SMBUS_IO_BASE; pei_data->wdbbar = 0x4000000; pei_data->wdbsize = 0x1000; diff --git a/src/northbridge/intel/sandybridge/sandybridge.h b/src/northbridge/intel/sandybridge/sandybridge.h index d7de843..dc9f889 100644 --- a/src/northbridge/intel/sandybridge/sandybridge.h +++ b/src/northbridge/intel/sandybridge/sandybridge.h @@ -17,6 +17,8 @@ #ifndef __NORTHBRIDGE_INTEL_SANDYBRIDGE_SANDYBRIDGE_H__ #define __NORTHBRIDGE_INTEL_SANDYBRIDGE_SANDYBRIDGE_H__ +#include <northbridge/intel/sandybridge/include/soc/iomap.h> + /* Device ID for SandyBridge and IvyBridge */ #define BASE_REV_SNB 0x00 #define BASE_REV_IVB 0x50 @@ -34,24 +36,6 @@ #define IVB_STEP_K0 (BASE_REV_IVB + 5) #define IVB_STEP_D0 (BASE_REV_IVB + 6) -/* Intel Enhanced Debug region must be 4MB */ - -#define IED_SIZE CONFIG_IED_REGION_SIZE - -/* Northbridge BARs */ -#ifndef __ACPI__ -#define DEFAULT_MCHBAR ((u8 *)0xfed10000) /* 16 KB */ -#define DEFAULT_DMIBAR ((u8 *)0xfed18000) /* 4 KB */ -#else -#define DEFAULT_MCHBAR 0xfed10000 /* 16 KB */ -#define DEFAULT_DMIBAR 0xfed18000 /* 4 KB */ -#endif -#define DEFAULT_EPBAR 0xfed19000 /* 4 KB */ -#define DEFAULT_RCBABASE ((u8 *)0xfed1c000) - -#define IOMMU_BASE1 0xfed90000ULL -#define IOMMU_BASE2 0xfed91000ULL - /* Everything below this line is ignored in the DSDT */ #ifndef __ACPI__ #include <cpu/intel/model_206ax/model_206ax.h> @@ -118,9 +102,9 @@ * MCHBAR */ -#define MCHBAR8(x) (*((volatile u8 *)(DEFAULT_MCHBAR + (x)))) -#define MCHBAR16(x) (*((volatile u16 *)(DEFAULT_MCHBAR + (x)))) -#define MCHBAR32(x) (*((volatile u32 *)(DEFAULT_MCHBAR + (x)))) +#define MCHBAR8(x) (*((volatile u8 *)((uintptr_t)MCH_BASE_ADDRESS + (x)))) +#define MCHBAR16(x) (*((volatile u16 *)((uintptr_t)MCH_BASE_ADDRESS + (x)))) +#define MCHBAR32(x) (*((volatile u32 *)((uintptr_t)MCH_BASE_ADDRESS + (x)))) #define MCHBAR32_OR(x, or) (MCHBAR32(x) = (MCHBAR32(x) | (or))) #define MCHBAR32_AND(x, and) (MCHBAR32(x) = (MCHBAR32(x) & (and))) #define MCHBAR32_AND_OR(x, and, or) \ @@ -133,9 +117,9 @@ * EPBAR - Egress Port Root Complex Register Block */ -#define EPBAR8(x) (*((volatile u8 *)(DEFAULT_EPBAR + (x)))) -#define EPBAR16(x) (*((volatile u16 *)(DEFAULT_EPBAR + (x)))) -#define EPBAR32(x) (*((volatile u32 *)(DEFAULT_EPBAR + (x)))) +#define EPBAR8(x) (*((volatile u8 *)((uintptr_t)EP_BASE_ADDRESS + (x)))) +#define EPBAR16(x) (*((volatile u16 *)((uintptr_t)EP_BASE_ADDRESS + (x)))) +#define EPBAR32(x) (*((volatile u32 *)((uintptr_t)EP_BASE_ADDRESS + (x)))) #define EPPVCCAP1 0x004 /* 32bit */ #define EPPVCCAP2 0x008 /* 32bit */ @@ -164,9 +148,9 @@ * DMIBAR */ -#define DMIBAR8(x) (*((volatile u8 *)(DEFAULT_DMIBAR + (x)))) -#define DMIBAR16(x) (*((volatile u16 *)(DEFAULT_DMIBAR + (x)))) -#define DMIBAR32(x) (*((volatile u32 *)(DEFAULT_DMIBAR + (x)))) +#define DMIBAR8(x) (*((volatile u8 *)((uintptr_t)DMI_BASE_ADDRESS + (x)))) +#define DMIBAR16(x) (*((volatile u16 *)((uintptr_t)DMI_BASE_ADDRESS + (x)))) +#define DMIBAR32(x) (*((volatile u32 *)((uintptr_t)DMI_BASE_ADDRESS + (x)))) #define DMIVCECH 0x000 /* 32bit */ #define DMIPVCCAP1 0x004 /* 32bit */ -- To view, visit https://review.coreboot.org/c/coreboot/+/32075 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I93aa0e78ff52e46256debd26601600a96404509f Gerrit-Change-Number: 32075 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

6 9

Change in coreboot[master]: console,boot_state: Denote unit in beginning in log message
by Paul Menzel (Code Review) 07 Aug '23

07 Aug '23

Paul Menzel has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/38136 ) Change subject: console,boot_state: Denote unit in beginning in log message ...................................................................... console,boot_state: Denote unit in beginning in log message Looking at the board status repository logs, lines similar to BS: postcar times (exec / console): total (unknown) / 0 ms BS: BS_DEV_ENUMERATE run times (exec / console): 6 / 0 ms are not obvious right away, as the unit visually only applies to the value after the slash. So, add the unit after `times`. BS: BS_DEV_ENUMERATE run times [ms] (exec / console): 6 / 0 Change-Id: If01a5d43a54aeefc0a6d49d4b600436c2a8328cd Signed-off-by: Paul Menzel <pmenzel(a)molgen.mpg.de> --- M src/console/printk.c M src/lib/hardwaremain.c 2 files changed, 2 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/36/38136/1 diff --git a/src/console/printk.c b/src/console/printk.c index 3ef28f3..be7c98b 100644 --- a/src/console/printk.c +++ b/src/console/printk.c @@ -49,7 +49,7 @@ if (!TRACK_CONSOLE_TIME) return; - printk(BIOS_DEBUG, "BS: " ENV_STRING " times (exec / console): total (unknown) / %ld ms\n", + printk(BIOS_DEBUG, "BS: " ENV_STRING " times [ms] (exec / console): total (unknown) / %ld\n", DIV_ROUND_CLOSEST(console_usecs, USECS_PER_MSEC)); } diff --git a/src/lib/hardwaremain.c b/src/lib/hardwaremain.c index eba5f12..cf1e1b7 100644 --- a/src/lib/hardwaremain.c +++ b/src/lib/hardwaremain.c @@ -250,7 +250,7 @@ execution = DIV_ROUND_CLOSEST(execution, USECS_PER_MSEC); console = DIV_ROUND_CLOSEST(console, USECS_PER_MSEC); if (execution) { - printk(BIOS_DEBUG, "BS: %s %s times (exec / console): %ld / %ld ms\n", + printk(BIOS_DEBUG, "BS: %s %s times [ms] (exec / console): %ld / %ld\n", state->name, sample_id[i], execution - console, console); /* Reset again to ignore printk() time above. */ console_time_get_and_reset(); -- To view, visit https://review.coreboot.org/c/coreboot/+/38136 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: If01a5d43a54aeefc0a6d49d4b600436c2a8328cd Gerrit-Change-Number: 38136 Gerrit-PatchSet: 1 Gerrit-Owner: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-MessageType: newchange

5 8

Change in coreboot[master]: util/lint/checkpatch: Update to 96 char line length limit
by Paul Menzel (Code Review) 07 Aug '23

07 Aug '23

Paul Menzel has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/38677 ) Change subject: util/lint/checkpatch: Update to 96 char line length limit ...................................................................... util/lint/checkpatch: Update to 96 char line length limit Follow up on commit bcbf2deb42 (Documentation/coding_style.md: Update line length limit) and update the script `checkpatch.pl`. Change-Id: I2b5c5d4cf9f0534298d00e76173cd448e8e13281 Signed-off-by: Paul Menzel <pmenzel(a)molgen.mpg.de> --- M util/lint/checkpatch.pl 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/77/38677/1 diff --git a/util/lint/checkpatch.pl b/util/lint/checkpatch.pl index 1affdb7..c6cbe69 100755 --- a/util/lint/checkpatch.pl +++ b/util/lint/checkpatch.pl @@ -51,7 +51,7 @@ my @exclude = (); #coreboot my $help = 0; my $configuration_file = ".checkpatch.conf"; -my $max_line_length = 80; +my $max_line_length = 96; my $ignore_perl_version = 0; my $minimum_perl_version = 5.10.0; my $min_conf_desc_length = 4; -- To view, visit https://review.coreboot.org/c/coreboot/+/38677 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I2b5c5d4cf9f0534298d00e76173cd448e8e13281 Gerrit-Change-Number: 38677 Gerrit-PatchSet: 1 Gerrit-Owner: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-MessageType: newchange

4 5

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit February 2022