coreboot-gerrit June 2020

coreboot-gerrit@coreboot.org

1 participants
2826 discussions

Change in coreboot[master]: Documentation: Add guidelines for new mainboard ports
by Patrick Rudolph (Code Review) 07 Aug '23

07 Aug '23

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/34632 ) Change subject: Documentation: Add guidelines for new mainboard ports ...................................................................... Documentation: Add guidelines for new mainboard ports This is WIP and partly copied from https://www.coreboot.org/Motherboard_Porting_Guide It also list what should be documented for new mainboard ports. Change-Id: I134dbf2341696ba0dd33c3d52bf787b8eaabbdab Signed-off-by: Patrick Rudolph <siro(a)das-labor.org> --- M Documentation/getting_started/index.md A Documentation/getting_started/new_mainboard_ports.md M Documentation/getting_started/writing_documentation.md 3 files changed, 95 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/32/34632/1 diff --git a/Documentation/getting_started/index.md b/Documentation/getting_started/index.md index 52d873e..7821ee1 100644 --- a/Documentation/getting_started/index.md +++ b/Documentation/getting_started/index.md @@ -7,3 +7,4 @@ * [Gerrit Guidelines](gerrit_guidelines.md) * [Documentation License](license.md) * [Writing Documentation](writing_documentation.md) +* [Adding new mainboards](new_mainboard_ports.md) diff --git a/Documentation/getting_started/new_mainboard_ports.md b/Documentation/getting_started/new_mainboard_ports.md new file mode 100644 index 0000000..cb7cd9b --- /dev/null +++ b/Documentation/getting_started/new_mainboard_ports.md @@ -0,0 +1,91 @@ +# Adding new mainboards + +Mainboard code is placed under `src/mainboards`. It glues the HW components +together by selecting appropiate northbridge, southbridge, on-board HW and +drivers. + +It provides the devicetree.cb, configures GPIOs, audio codecs, a static ACPI +board desciption and allows the romstage code to retrieve the SPD for +DRAM training. + +## Starting a new port from scratch + +1. Identify your platform + Try to find out as much as possible about the current hardware. + Dump information with existing tools: + * lspci + * lsusb + * superiotool + * inteltool + * ectool + * dmidecode + * acpidump + + Have a look at the mainboard schematics to see how those components are + connected. +2. Find a similar existing board + It a good idea to find a similar board and use it as reference. You should + then provide a proper GPIO configuration and devicetree.cb. +3. Find a similar SuperIo or BMC + To debug coreboot you should get the serial console working first. If your + board has a SuperIO or BMC try to find a compatible one. + Some boards have UART hardware on the SoC, makeing external components + obsolete. +4. Start with a minimal bootable configuration. That is: + * serial is working + * SPD reading/DRAM is working + * A payload that is able to boot an operating system +5. Be able to recover from a bad flash. You should use external flashing as + it's likely that you will brick your platform on the first attempts. + Make sure to backup the original firmware (if any). + +## Code submission + +Here's a checklist for new mainboard ports: + +1. Try to not duplicate code, use variants scheme instead. +2. Split changes logical into top level directories: + `src/mainboard` , `src/northbridge`, `src/ec`, ... +3. Provide good documentation, see point 4 +4. In the commit message describe as much as possible or point to the + documentation, satisfying the following questions: + * Where's the flash IC located? + * Can you flash incircuit? + * Are there pinheaders for flashing? + * Is the flash hardware write-protected? + * Which flash IC is usually equipped? + * If the board features an BMC, can it be used for developing and + debugging? + * What was tested and is working? + * What was tested and isn't working? + * What wasn't tested (due to lack of testing equipment)? + * Are blobs necessary? + * How can the board be debugged? + * Are there serial, EHCI debug, xHCI debug or BMC connections? + * Does it have a SuperIO? + + In addition please descibe: + * How to retrieve blobs, like dumping them from vendor firmware + + See [Writing Documentation] for more details. + +5. What you should **not** document: + * Steps or instructions how to flash the board + * Steps or instructions how to use a specific application for flashing + * Please do not provide pictures of the whole board or it's backplate + connectors +6. Recommand a flashing method as descibed in [Flashing tutorial] +7. If you are working at/for a hardware vendor, please provide free board + schematics as well. +8. Provide a picture of the flash IC or flash connector. + * The picture should be less than 800pc in width and compressed with + 70% compression to reduce size. + * You must own the Copyright + * Try to cut of uninteresting parts of the image, like tables, cables, ... + +Once done submit your board to Gerrit. Please follow the [Gerrit Guidelines] as +well. + +[Writing Documentation]: writing_documentation.md +[Flashing tutorial]: ../flash_tutorial/index.md +[Gerrit Guidelines]: gerrit_guidelines.md diff --git a/Documentation/getting_started/writing_documentation.md b/Documentation/getting_started/writing_documentation.md index fb942a4..0b820fc 100644 --- a/Documentation/getting_started/writing_documentation.md +++ b/Documentation/getting_started/writing_documentation.md @@ -49,6 +49,8 @@ the current theme doesn't allow bigger images. 12. Shouldn't cover implementation details; for details, the code is the reference. +13. New mainboard ports should also add documentation. See + [Adding new mainboards] for more details. ## Referencing markdown documents @@ -122,3 +124,4 @@ [Markdown Guide]: https://www.markdownguide.org/ [Gerrit Guidelines]: gerrit_guidelines.md [review.coreboot.org]: https://review.coreboot.org +[Adding new mainboards]: new_mainboard_ports.md -- To view, visit https://review.coreboot.org/c/coreboot/+/34632 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I134dbf2341696ba0dd33c3d52bf787b8eaabbdab Gerrit-Change-Number: 34632 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

9 19

Change in coreboot[master]: mb/kontron/986lcd-m: Select FIXED_UART_FOR_CONSOLE
by Paul Menzel (Code Review) 07 Aug '23

07 Aug '23

Paul Menzel has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/39124 ) Change subject: mb/kontron/986lcd-m: Select FIXED_UART_FOR_CONSOLE ...................................................................... mb/kontron/986lcd-m: Select FIXED_UART_FOR_CONSOLE The serial port base address is hardcoded for this mainboard, so deactivate the Kconfig dialog for `TTYS0_BASE`. Change-Id: Ic989e4c4fde8ce03c6941c44f71dc72840fc77c3 Signed-off-by: Paul Menzel <pmenzel(a)molgen.mpg.de> --- M src/mainboard/kontron/986lcd-m/Kconfig 1 file changed, 1 insertion(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/24/39124/1 diff --git a/src/mainboard/kontron/986lcd-m/Kconfig b/src/mainboard/kontron/986lcd-m/Kconfig index dfc7c3c..204d404 100644 --- a/src/mainboard/kontron/986lcd-m/Kconfig +++ b/src/mainboard/kontron/986lcd-m/Kconfig @@ -9,6 +9,7 @@ select SOUTHBRIDGE_INTEL_I82801GX select SUPERIO_WINBOND_W83627THG select SUPERIO_NUVOTON_COMMON_HWM # Nuvoton is a Winbond spin-off + select FIXED_UART_FOR_CONSOLE select HAVE_ACPI_TABLES select HAVE_PIRQ_TABLE select HAVE_MP_TABLE -- To view, visit https://review.coreboot.org/c/coreboot/+/39124 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ic989e4c4fde8ce03c6941c44f71dc72840fc77c3 Gerrit-Change-Number: 39124 Gerrit-PatchSet: 1 Gerrit-Owner: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-MessageType: newchange

4 4

Change in ...coreboot[master]: WIP: google/krane: Add Panel TV101WUM-NL6 support.
by Kaka Ni (Code Review) 07 Aug '23

07 Aug '23

Kaka Ni has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32512 Change subject: WIP: google/krane: Add Panel TV101WUM-NL6 support. ...................................................................... WIP: google/krane: Add Panel TV101WUM-NL6 support. Add panel TV101WUM-NL6 for Krane. The edid info and init command are from: https://crrev.com/c/1565758 Change-Id: Ieb6b2be6c2c571c09c781f4370d8c52612421823 Signed-off-by: Kaka Ni <nigang(a)huaqin.corp-partner.google.com> --- M src/mainboard/google/kukui/Makefile.inc M src/mainboard/google/kukui/display.c M src/mainboard/google/kukui/display.h A src/mainboard/google/kukui/panel_krane.c 4 files changed, 423 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/12/32512/1 diff --git a/src/mainboard/google/kukui/Makefile.inc b/src/mainboard/google/kukui/Makefile.inc index ef52031..9576b7d 100644 --- a/src/mainboard/google/kukui/Makefile.inc +++ b/src/mainboard/google/kukui/Makefile.inc @@ -24,6 +24,7 @@ ramstage-y += chromeos.c ramstage-y += display.c ramstage-y += panel_kukui.c +ramstage-y += panel_krane.c ramstage-y += mainboard.c ramstage-y += memlayout.ld ramstage-y += reset.c diff --git a/src/mainboard/google/kukui/display.c b/src/mainboard/google/kukui/display.c index 5ec6ccd..b0a5026 100644 --- a/src/mainboard/google/kukui/display.c +++ b/src/mainboard/google/kukui/display.c @@ -97,6 +97,8 @@ { if (CONFIG(BOARD_GOOGLE_KUKUI)) return &kukui_display_intf; + else if (CONFIG(BOARD_GOOGLE_KRANE)) + return &krane_display_intf; else return NULL; } diff --git a/src/mainboard/google/kukui/display.h b/src/mainboard/google/kukui/display.h index 33cc997..52420db 100644 --- a/src/mainboard/google/kukui/display.h +++ b/src/mainboard/google/kukui/display.h @@ -33,9 +33,18 @@ PANEL_KUKUI_UNINITIALIZED }; +enum krane_panel_id { + PANEL_KRANE_FIRST = 0, + PANEL_KRANE_BOE_TV101WUM_NL6, + PANEL_KRANE_UNKNOWN, + PANEL_KRANE_COUNT, + PANEL_KRANE_UNINITIALIZED +}; + union panel_id { enum kukui_panel_id kukui_panel; + enum krane_panel_id krane_panel; int value; }; @@ -90,6 +99,7 @@ * Panel Interface for boards */ extern struct board_display_intf kukui_display_intf; +extern struct board_display_intf krane_display_intf; #endif diff --git a/src/mainboard/google/kukui/panel_krane.c b/src/mainboard/google/kukui/panel_krane.c new file mode 100644 index 0000000..5c338c8 --- /dev/null +++ b/src/mainboard/google/kukui/panel_krane.c @@ -0,0 +1,410 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2019 Huaqin Telecom Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <delay.h> +#include <device/device.h> +#include <edid.h> +#include <gpio.h> +#include <soc/auxadc.h> +#include <soc/ddp.h> +#include <soc/dsi.h> +#include <soc/gpio.h> +#include <boardid.h> + +#include "display.h" +#include "gpio.h" + +static struct edid krane_boe_tv101wum_nl6_edid = { + .panel_bits_per_color = 8, + .panel_bits_per_pixel = 24, + .mode = { + .name = "1200x1920@60Hz", + .pixel_clock = 159420, + .lvds_dual_channel = 0, + .refresh = 60, + .ha = 1200, .hbl = 164, .hso = 80, .hspw = 24, .hborder = 0, + .va = 1920, .vbl = 28, .vso = 10, .vspw = 4, .vborder = 0, + .phsync = '-', .pvsync = '-', + .x_mm = 135, .y_mm = 216, + }, +}; + +struct lcm_init_table boe_tv101wum_nl6_init_cmd[] = { + {INIT_DCS_CMD, 1, { 0x10 } }, + {DELAY_CMD, 34, {} }, + {INIT_DCS_CMD, 2, { 0xB0, 0x05 } }, + {INIT_DCS_CMD, 2, { 0xB1, 0xE5 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x52 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x88 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x03 } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x8B } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x1A } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x0F } }, + {INIT_DCS_CMD, 2, { 0xC2, 0x0C } }, + {INIT_DCS_CMD, 2, { 0xC3, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xC4, 0x0C } }, + {INIT_DCS_CMD, 2, { 0xC5, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x01 } }, + {INIT_DCS_CMD, 2, { 0xE0, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xE1, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xDC, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xDD, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xCD, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xC8, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xD2, 0x03 } }, + {INIT_DCS_CMD, 2, { 0xD3, 0x03 } }, + {INIT_DCS_CMD, 2, { 0xE6, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xE7, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xC4, 0x09 } }, + {INIT_DCS_CMD, 2, { 0xC5, 0x09 } }, + {INIT_DCS_CMD, 2, { 0xD8, 0x0A } }, + {INIT_DCS_CMD, 2, { 0xD9, 0x0A } }, + {INIT_DCS_CMD, 2, { 0xC2, 0x0B } }, + {INIT_DCS_CMD, 2, { 0xC3, 0x0B } }, + {INIT_DCS_CMD, 2, { 0xD6, 0x0C } }, + {INIT_DCS_CMD, 2, { 0xD7, 0x0C } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x05 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x05 } }, + {INIT_DCS_CMD, 2, { 0xD4, 0x06 } }, + {INIT_DCS_CMD, 2, { 0xD5, 0x06 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xDE, 0x08 } }, + {INIT_DCS_CMD, 2, { 0xDF, 0x08 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x0D } }, + {INIT_DCS_CMD, 2, { 0xC2, 0x17 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xC4, 0x31 } }, + {INIT_DCS_CMD, 2, { 0xC5, 0x1C } }, + {INIT_DCS_CMD, 2, { 0xC6, 0x2C } }, + {INIT_DCS_CMD, 2, { 0xC7, 0x33 } }, + {INIT_DCS_CMD, 2, { 0xC8, 0x31 } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xCD, 0x2E } }, + {INIT_DCS_CMD, 2, { 0xCE, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xCF, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xD0, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xD2, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xD3, 0x0D } }, + {INIT_DCS_CMD, 2, { 0xD4, 0x17 } }, + {INIT_DCS_CMD, 2, { 0xD5, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xD6, 0x31 } }, + {INIT_DCS_CMD, 2, { 0xD7, 0x3F } }, + {INIT_DCS_CMD, 2, { 0xD8, 0x3F } }, + {INIT_DCS_CMD, 2, { 0xD9, 0x3F } }, + {INIT_DCS_CMD, 2, { 0xDA, 0x3F } }, + {INIT_DCS_CMD, 2, { 0xDB, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xDC, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xDD, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xDE, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xDF, 0x2E } }, + {INIT_DCS_CMD, 2, { 0xE0, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xE1, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xE2, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x03 } }, + {INIT_DCS_CMD, 2, { 0xC8, 0x0B } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xE7, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xC5, 0x2A } }, + {INIT_DCS_CMD, 2, { 0xDE, 0x2A } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x43 } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xE4, 0xC0 } }, + {INIT_DCS_CMD, 2, { 0xE5, 0x0D } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x06 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0xA5 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0xA5 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0x0F } }, + {INIT_DCS_CMD, 2, { 0xD5, 0x32 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x0F } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x25 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4E } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x72 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x97 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xDC } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x22 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xA4 } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x2B } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xA9 } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x25 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x61 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x97 } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB2 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xCD } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xD9 } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE7 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF4 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x08 } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x05 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x11 } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x24 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4F } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x72 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x98 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xDC } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x23 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xA6 } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x2C } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x30 } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xAA } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x62 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x9B } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB5 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xCF } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xDB } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE8 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF5 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x09 } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x24 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x3B } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4F } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x73 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x99 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xE0 } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xAD } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x36 } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x3A } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xAE } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x2A } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x66 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x9E } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB8 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xD1 } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xDD } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE9 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF6 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x0A } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x0F } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x25 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4E } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x72 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x97 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xDC } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x22 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xA4 } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x2B } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xA9 } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x25 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x61 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x97 } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB2 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xCD } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xD9 } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE7 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF4 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x0B } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x05 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x11 } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x24 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4F } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x72 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x98 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xDC } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x23 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xA6 } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x2C } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x30 } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xAA } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x62 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x9B } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB5 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xCF } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xDB } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE8 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF5 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x0C } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x24 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x3B } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4F } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x73 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x99 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xE0 } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xAD } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x36 } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x3A } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xAE } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x2A } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x66 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x9E } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB8 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xD1 } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xDD } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE9 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF6 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x08 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x68 } }, + {DELAY_CMD, 10, {} }, + {INIT_DCS_CMD, 1, { 0x11 } }, + {DELAY_CMD, 120, {} }, + {INIT_DCS_CMD, 1, { 0x29 } }, + {DELAY_CMD, 20, {} }, + +}; + +struct panel_info krane_panel_info[] = { + PANEL(PANEL_KRANE_BOE_TV101WUM_NL6, + 74000, + krane_boe_tv101wum_nl6_edid, + boe_tv101wum_nl6_init_cmd), + {{PANEL_KRANE_UNKNOWN}, "PANEL_KRANE_UNKNOWN", + 0, NULL, NULL, 0}, +}; + + +static union panel_id krane_get_panel_id(struct board_display_intf *intf) +{ + + return (union panel_id)PANEL_KRANE_BOE_TV101WUM_NL6; +}; + +static bool krane_is_panel_id_valid(union panel_id id) +{ + if (id.value < PANEL_KRANE_UNKNOWN) + return true; + return false; +}; + +static int krane_backlight(struct board_display_intf *intf) +{ + configure_backlight(); + return 0; +}; + +static int krane_power(struct board_display_intf *intf) +{ + + if (board_id() < 2) { + /* board from p1 */ + gpio_output(GPIO(LCM_RST), 0); + udelay(100); + gpio_output(GPIO(LCM_RST), 1); + mdelay(20); + } else { + /* board from p2 */ + gpio_output(GPIO(LCM_RST), 0); + udelay(1500); + gpio_output(GPIO(SIM2_SRST), 1); + mdelay(5); + gpio_output(GPIO(PERIPHERAL_EN9), 1); + gpio_output(GPIO(MISC_BSI_CK_3), 1); + mdelay(100); + gpio_output(GPIO(LCM_RST), 1); + mdelay(10); + } + + return 0; + +}; + +struct board_display_intf krane_display_intf = { + .board = "krane", + .all_panel_info = krane_panel_info, + .all_panel_info_size = ARRAY_SIZE(krane_panel_info), + .cur_panel_info = NULL, + .get_panel_id = &krane_get_panel_id, + .is_panel_id_valid = &krane_is_panel_id_valid, + .backlight = &krane_backlight, + .power = &krane_power, +}; -- To view, visit https://review.coreboot.org/c/coreboot/+/32512 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ieb6b2be6c2c571c09c781f4370d8c52612421823 Gerrit-Change-Number: 32512 Gerrit-PatchSet: 1 Gerrit-Owner: Kaka Ni <nigang(a)huaqin.corp-partner.google.com> Gerrit-MessageType: newchange

6 15

Change in ...coreboot[master]: util/lint: check correctness of Change-Id line
by Idwer Vollering (Code Review) 07 Aug '23

07 Aug '23

Idwer Vollering has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33884 Change subject: util/lint: check correctness of Change-Id line ...................................................................... util/lint: check correctness of Change-Id line Change-Id: I67b9f134500bb596ae5790b68fe9f27e2fa2cfb4 Signed-off-by: Idwer Vollering <vidwer(a)gmail.com> --- A util/lint/lint-extended-024-change-id 1 file changed, 10 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/84/33884/1 diff --git a/util/lint/lint-extended-024-change-id b/util/lint/lint-extended-024-change-id new file mode 100755 index 0000000..1989ed4 --- /dev/null +++ b/util/lint/lint-extended-024-change-id @@ -0,0 +1,10 @@ +#!/bin/sh +if [ "$(git log -n 1 | grep -c '[[:space:]]\+Change-Id: ')" -lt 1 ] +then + echo "Change-Id line is missing"; +fi + +if [ "$(git log -n 1 | grep -c '[[:space:]]\+Change-Id: ')" -gt 1 ] +then + echo "Found more than one Change-Id line"; +fi -- To view, visit https://review.coreboot.org/c/coreboot/+/33884 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I67b9f134500bb596ae5790b68fe9f27e2fa2cfb4 Gerrit-Change-Number: 33884 Gerrit-PatchSet: 1 Gerrit-Owner: Idwer Vollering <vidwer(a)gmail.com> Gerrit-MessageType: newchange

7 18

Change in coreboot[master]: cpu/intel/speedstep: Add comment to clarify define
by Patrick Rudolph (Code Review) 07 Aug '23

07 Aug '23

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/34360 ) Change subject: cpu/intel/speedstep: Add comment to clarify define ...................................................................... cpu/intel/speedstep: Add comment to clarify define Add a comment to clarify that the define must match the define in southbridge headers. Change-Id: Ie0e97b170c81e3bca38975d6a3fe9a368c70e622 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/include/cpu/intel/speedstep.h 1 file changed, 1 insertion(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/60/34360/1 diff --git a/src/include/cpu/intel/speedstep.h b/src/include/cpu/intel/speedstep.h index 05d83ed..660e5ae 100644 --- a/src/include/cpu/intel/speedstep.h +++ b/src/include/cpu/intel/speedstep.h @@ -25,6 +25,7 @@ /* MWAIT coordination I/O base address. This must match * the \_PR_.CP00 PM base address. + * PMB0_BASE - 0x10 should match PMBASE for legacy C-state emulation. */ #define PMB0_BASE 0x510 -- To view, visit https://review.coreboot.org/c/coreboot/+/34360 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ie0e97b170c81e3bca38975d6a3fe9a368c70e622 Gerrit-Change-Number: 34360 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

5 4

Change in coreboot[master]: coreinfo/coreinfo.c: Provide information of time format
by Name of user not set (Code Review) 07 Aug '23

07 Aug '23

Name of user not set #1002476 has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35847 ) Change subject: coreinfo/coreinfo.c: Provide information of time format ...................................................................... coreinfo/coreinfo.c: Provide information of time format Specify Coordinated Universal Time (UTC) time format while print date and time in the coreinfo payload. Change-Id: I359cef7697daf5d92d2c9fb58bf75c5b1345e982 Signed-off-by: Sourabh Kashyap <sourabhka(a)hcl.com> --- M payloads/coreinfo/coreinfo.c 1 file changed, 4 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/47/35847/1 diff --git a/payloads/coreinfo/coreinfo.c b/payloads/coreinfo/coreinfo.c index 53985b2..ea4d424 100644 --- a/payloads/coreinfo/coreinfo.c +++ b/payloads/coreinfo/coreinfo.c @@ -124,8 +124,10 @@ rtc_read_clock(&tm); - mvwprintw(menuwin, 1, 57, "%02d/%02d/%04d - %02d:%02d:%02d", - tm.tm_mon + 1, tm.tm_mday, 1900 + tm.tm_year, tm.tm_hour, + mvwprintw(menuwin, 1, 53, "%02d/%02d/%04d", tm.tm_mon + 1, + tm.tm_mday, 1900 + tm.tm_year); + mvwprintw(menuwin, 1, 63, " - UTC "); + mvwprintw(menuwin, 1, 70, "%02d:%02d:%02d", tm.tm_hour, tm.tm_min, tm.tm_sec); } #endif -- To view, visit https://review.coreboot.org/c/coreboot/+/35847 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I359cef7697daf5d92d2c9fb58bf75c5b1345e982 Gerrit-Change-Number: 35847 Gerrit-PatchSet: 1 Gerrit-Owner: Name of user not set #1002476 Gerrit-MessageType: newchange

4 10

Change in coreboot[master]: soc/intel/(fsp_)baytrail: Initialize SPI before console init
by Arthur Heymans (Code Review) 07 Aug '23

07 Aug '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36407 ) Change subject: soc/intel/(fsp_)baytrail: Initialize SPI before console init ...................................................................... soc/intel/(fsp_)baytrail: Initialize SPI before console init This makes the spi flash console function during romstage. It was tested with the FSP baytrail codepath but it's a safe assumption that the same fix also applies for the google mrc.bin codepath. Tested on Intel Minnowboard Turbot. Change-Id: If6ef0eeea902ab76d398d0218ee943e482f69b43 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/soc/intel/baytrail/romstage/romstage.c M src/soc/intel/fsp_baytrail/romstage/romstage.c 2 files changed, 5 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/07/36407/1 diff --git a/src/soc/intel/baytrail/romstage/romstage.c b/src/soc/intel/baytrail/romstage/romstage.c index 7c129e2..e06c39e 100644 --- a/src/soc/intel/baytrail/romstage/romstage.c +++ b/src/soc/intel/baytrail/romstage/romstage.c @@ -165,10 +165,10 @@ if (CONFIG(ENABLE_BUILTIN_COM1)) byt_config_com1_and_enable(); - console_init(); - spi_init(); + console_init(); + set_max_freq(); punit_init(); diff --git a/src/soc/intel/fsp_baytrail/romstage/romstage.c b/src/soc/intel/fsp_baytrail/romstage/romstage.c index f347591..78aa9fc 100644 --- a/src/soc/intel/fsp_baytrail/romstage/romstage.c +++ b/src/soc/intel/fsp_baytrail/romstage/romstage.c @@ -171,9 +171,11 @@ byt_config_com1_and_enable(); post_code(0x43); - console_init(); spi_init(); + + console_init(); + baytrail_rtc_init(); /* Call into mainboard. */ -- To view, visit https://review.coreboot.org/c/coreboot/+/36407 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: If6ef0eeea902ab76d398d0218ee943e482f69b43 Gerrit-Change-Number: 36407 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

4 3

Change in coreboot[master]: arch/acpi.h: Avoid explicitly assign values to enum names
by Name of user not set (Code Review) 07 Aug '23

07 Aug '23

Name of user not set #1002476 has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36430 ) Change subject: arch/acpi.h: Avoid explicitly assign values to enum names ...................................................................... arch/acpi.h: Avoid explicitly assign values to enum names Compiler by default assign values starting from the initial integral constant. Change-Id: I1a5aa9762051780b67013f67f101112fc7a0bf6e Signed-off-by: Himanshu Sahdev <himanshusah(a)hcl.com> --- M src/arch/x86/include/arch/acpi.h 1 file changed, 19 insertions(+), 19 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/30/36430/1 diff --git a/src/arch/x86/include/arch/acpi.h b/src/arch/x86/include/arch/acpi.h index 479067f..a9bd9f6 100644 --- a/src/arch/x86/include/arch/acpi.h +++ b/src/arch/x86/include/arch/acpi.h @@ -302,10 +302,10 @@ enum dev_scope_type { SCOPE_PCI_ENDPOINT = 1, - SCOPE_PCI_SUB = 2, - SCOPE_IOAPIC = 3, - SCOPE_MSI_HPET = 4, - SCOPE_ACPI_NAMESPACE_DEVICE = 5 + SCOPE_PCI_SUB, + SCOPE_IOAPIC, + SCOPE_MSI_HPET, + SCOPE_ACPI_NAMESPACE_DEVICE }; typedef struct dev_scope { @@ -321,11 +321,11 @@ } __packed dev_scope_t; enum dmar_type { - DMAR_DRHD = 0, - DMAR_RMRR = 1, - DMAR_ATSR = 2, - DMAR_RHSA = 3, - DMAR_ANDD = 4 + DMAR_DRHD, + DMAR_RMRR, + DMAR_ATSR, + DMAR_RHSA, + DMAR_ANDD }; enum { @@ -599,15 +599,15 @@ /* FADT Preferred Power Management Profile */ enum acpi_preferred_pm_profiles { - PM_UNSPECIFIED = 0, - PM_DESKTOP = 1, - PM_MOBILE = 2, - PM_WORKSTATION = 3, - PM_ENTERPRISE_SERVER = 4, - PM_SOHO_SERVER = 5, - PM_APPLIANCE_PC = 6, - PM_PERFORMANCE_SERVER = 7, - PM_TABLET = 8, /* ACPI 5.0 & greater */ + PM_UNSPECIFIED, + PM_DESKTOP, + PM_MOBILE, + PM_WORKSTATION3, + PM_ENTERPRISE_SERVER4, + PM_SOHO_SERVER, + PM_APPLIANCE_PC, + PM_PERFORMANCE_SERVER, + PM_TABLET, /* ACPI 5.0 & greater */ }; /* FACS (Firmware ACPI Control Structure) */ @@ -780,7 +780,7 @@ }; enum acpi_ipmi_interface_type { - IPMI_INTERFACE_RESERVED = 0, + IPMI_INTERFACE_RESERVED, IPMI_INTERFACE_KCS, IPMI_INTERFACE_SMIC, IPMI_INTERFACE_BT, -- To view, visit https://review.coreboot.org/c/coreboot/+/36430 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I1a5aa9762051780b67013f67f101112fc7a0bf6e Gerrit-Change-Number: 36430 Gerrit-PatchSet: 1 Gerrit-Owner: Name of user not set #1002476 Gerrit-MessageType: newchange

4 7

Change in coreboot[master]: arch/riscv: Fix cpu capabilities detection function
by Xiang Wang (Code Review) 07 Aug '23

07 Aug '23

Xiang Wang has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36944 ) Change subject: arch/riscv: Fix cpu capabilities detection function ...................................................................... arch/riscv: Fix cpu capabilities detection function On some platforms, misa may not be implemented. On such a platform, reading misa will get zero. At this time, soc is required to implement a non-standard method to detect the soc function. This modification add interfaces for non-standard function. The MXL field of misa is always at the highest two bits, whether it is a 32-bit 64-bit or a 128-bit machine. Therefore, this modification fixes the use of a fixed offset to detect the machine length. Change-Id: Id24f77bf21ef0c7c300faa477d67294d093eeecc Signed-off-by: Xiang Wang <merle(a)hardenedlinux.org> --- M src/arch/riscv/Makefile.inc A src/arch/riscv/cpu.c M src/arch/riscv/include/arch/cpu.h 3 files changed, 87 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/44/36944/1 diff --git a/src/arch/riscv/Makefile.inc b/src/arch/riscv/Makefile.inc index 0038523..0679be73 100644 --- a/src/arch/riscv/Makefile.inc +++ b/src/arch/riscv/Makefile.inc @@ -60,6 +60,7 @@ bootblock-y += trap_util.S bootblock-y += trap_handler.c bootblock-y += fp_asm.S +bootblock-y += cpu.c bootblock-y += misaligned.c bootblock-y += sbi.c bootblock-y += mcall.c @@ -100,6 +101,7 @@ romstage-y += boot.c romstage-y += romstage.c romstage-y += misc.c +romstage-y += cpu.c romstage-$(ARCH_RISCV_PMP) += pmp.c romstage-y += smp.c romstage-y += \ @@ -137,6 +139,7 @@ ramstage-y += trap_util.S ramstage-y += trap_handler.c ramstage-y += fp_asm.S +ramstage-y += cpu.c ramstage-y += misaligned.c ramstage-y += sbi.c ramstage-y += virtual_memory.c diff --git a/src/arch/riscv/cpu.c b/src/arch/riscv/cpu.c new file mode 100644 index 0000000..69556f3 --- /dev/null +++ b/src/arch/riscv/cpu.c @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/cpu.h> + + +__weak int soc_supports_extension(char ext) +{ + return 0; +} + +__weak int soc_machine_xlen(void) +{ + return -1; +} diff --git a/src/arch/riscv/include/arch/cpu.h b/src/arch/riscv/include/arch/cpu.h index c62199e..72a8a69 100644 --- a/src/arch/riscv/include/arch/cpu.h +++ b/src/arch/riscv/include/arch/cpu.h @@ -18,6 +18,7 @@ #include <arch/encoding.h> #include <device/device.h> +#include <commonlib/compiler.h> #define asmlinkage @@ -42,15 +43,68 @@ uint8_t riscv_model; }; +/* If the SOC does not implement misa, the read misa will be zero. + * Such SOC requires a non-standard mechanism to detect ISA extensions. + * If the soc does not implement misa, implement this function. + * */ +int soc_supports_extension(char ext); + static inline int supports_extension(char ext) { - return read_csr(misa) & (1 << (ext - 'A')); + uintptr_t isa = read_csr(misa); + if (isa) + return isa & (1 << (ext - 'A')); + else + return soc_supports_extension(ext); } +/* If the SOC does not implement misa, the read misa will be zero. + * Such SOC requires a non-standard mechanism to detect machine XLEN. + * If the soc does not implement misa, implement this function. + * */ +int soc_machine_xlen(void); + static inline int machine_xlen(void) { - int mxl = (read_csr(misa) >> (__riscv_xlen - 2)) & 3; - return (1 << mxl) * 16; + int r; + asm ( + "csrr t0, misa\n\t" + "bnez t0, 1f\n\t" + "call soc_machine_xlen\n\t" + "j 2f\n" + "1:\n\t" + "srli t1, t0, 30\n\t" + "srli t1, t1, 32\n\t" + "srli t1, t1, 32\n\t" + "srli t1, t1, 32\n\t" + "andi t1, t1, 3\n\t" + "li t2, 3\n\t" + "bne t1, t2, 1f\n\t" + "li %0, 128\n\t" + "j 2f\n" + "1:\n\t" + "srli t1, t0, 30\n\t" + "srli t1, t1, 32\n\t" + "andi t1, t1, 3\n\t" + "li t2, 2\n\t" + "bne t1, t2, 1f\n\t" + "li %0, 64\n\t" + "j 2f\n" + "1:\n\t" + "srli t1, t0, 30\n\t" + "andi t1, t1, 3\n\t" + "li t2, 1\n\t" + "bne t1, t2, 1f\n\t" + "li %0, 32\n\t" + "j 2f\n" + "1:\n\t" + "li %0, -1\n" + "2:" + : "=r"(r) + : + : "t0", "t1", "t2", "ra" + ); + return r; } struct cpu_info *cpu_info(void); -- To view, visit https://review.coreboot.org/c/coreboot/+/36944 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Id24f77bf21ef0c7c300faa477d67294d093eeecc Gerrit-Change-Number: 36944 Gerrit-PatchSet: 1 Gerrit-Owner: Xiang Wang <merle(a)hardenedlinux.org> Gerrit-MessageType: newchange

2 11

Change in coreboot[master]: arch/riscv: Add soc interface to get mtime frequency
by Xiang Wang (Code Review) 07 Aug '23

07 Aug '23

Xiang Wang has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37549 ) Change subject: arch/riscv: Add soc interface to get mtime frequency ...................................................................... arch/riscv: Add soc interface to get mtime frequency The mtime clock is not microseconds, but is determined by the specific platform. So timer_monotonic_get needs to know the frequency of mtime. Change-Id: I7d11d3ae73bc5dc81f2239829e1c5c7b4624800e Signed-off-by: Xiang Wang <merle(a)hardenedlinux.org> --- M src/arch/riscv/arch_timer.c M src/arch/riscv/include/mcall.h M src/mainboard/emulation/qemu-riscv/Makefile.inc M src/mainboard/emulation/qemu-riscv/clint.c M src/mainboard/emulation/spike-riscv/Makefile.inc M src/mainboard/emulation/spike-riscv/clint.c M src/soc/sifive/fu540/clint.c 7 files changed, 25 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/49/37549/1 diff --git a/src/arch/riscv/arch_timer.c b/src/arch/riscv/arch_timer.c index 55b1f72..1353abd 100644 --- a/src/arch/riscv/arch_timer.c +++ b/src/arch/riscv/arch_timer.c @@ -24,5 +24,6 @@ { if (HLS()->time == NULL) die("time not set in HLS"); - mono_time_set_usecs(mt, (long)read64((void *)(HLS()->time))); + long time = (long)read64((void *)(HLS()->time)); + mono_time_set_usecs(mt, time / (mtime_frequency() / 1000000)); } diff --git a/src/arch/riscv/include/mcall.h b/src/arch/riscv/include/mcall.h index d7d67ce..24b46a7 100644 --- a/src/arch/riscv/include/mcall.h +++ b/src/arch/riscv/include/mcall.h @@ -93,6 +93,12 @@ */ void set_msip(int hartid, int val); +/* + * This function is used to get frequency of mtime, + * need be implement by SoC code + */ +long mtime_frequency(void); + #endif // __ASSEMBLER__ #endif diff --git a/src/mainboard/emulation/qemu-riscv/Makefile.inc b/src/mainboard/emulation/qemu-riscv/Makefile.inc index eb99544..2ca75fd 100644 --- a/src/mainboard/emulation/qemu-riscv/Makefile.inc +++ b/src/mainboard/emulation/qemu-riscv/Makefile.inc @@ -19,6 +19,7 @@ romstage-y += romstage.c romstage-y += uart.c romstage-y += rom_media.c +romstage-y += clint.c ramstage-y += uart.c ramstage-y += rom_media.c diff --git a/src/mainboard/emulation/qemu-riscv/clint.c b/src/mainboard/emulation/qemu-riscv/clint.c index 367d48d..96d0f1d 100644 --- a/src/mainboard/emulation/qemu-riscv/clint.c +++ b/src/mainboard/emulation/qemu-riscv/clint.c @@ -23,3 +23,8 @@ HLS()->time = (uint64_t *)(QEMU_VIRT_CLINT + 0xbff8); HLS()->timecmp = (uint64_t *)(QEMU_VIRT_CLINT + 0x4000 + 8 * hart_id); } + +long mtime_frequency(void) +{ + return 1000000; +} diff --git a/src/mainboard/emulation/spike-riscv/Makefile.inc b/src/mainboard/emulation/spike-riscv/Makefile.inc index 38977b6..bfeaf58 100644 --- a/src/mainboard/emulation/spike-riscv/Makefile.inc +++ b/src/mainboard/emulation/spike-riscv/Makefile.inc @@ -18,6 +18,7 @@ romstage-y += romstage.c romstage-y += uart.c romstage-y += rom_media.c +romstage-y += clint.c ramstage-y += uart.c ramstage-y += rom_media.c ramstage-y += clint.c diff --git a/src/mainboard/emulation/spike-riscv/clint.c b/src/mainboard/emulation/spike-riscv/clint.c index 7ad3f5a..4c2b8fa 100644 --- a/src/mainboard/emulation/spike-riscv/clint.c +++ b/src/mainboard/emulation/spike-riscv/clint.c @@ -24,3 +24,8 @@ HLS()->time = (uint64_t *)(SPIKE_CLINT_BASE + 0xbff8); HLS()->timecmp = (uint64_t *)(SPIKE_CLINT_BASE + 0x4000 + 8 * hart_id); } + +long mtime_frequency(void) +{ + return 1000000; +} diff --git a/src/soc/sifive/fu540/clint.c b/src/soc/sifive/fu540/clint.c index 699273e..09ec719 100644 --- a/src/soc/sifive/fu540/clint.c +++ b/src/soc/sifive/fu540/clint.c @@ -29,3 +29,8 @@ { write32((void *)(FU540_CLINT + 4 * (uintptr_t)hartid), !!val); } + +long mtime_frequency(void) +{ + return 1000000; +} -- To view, visit https://review.coreboot.org/c/coreboot/+/37549 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I7d11d3ae73bc5dc81f2239829e1c5c7b4624800e Gerrit-Change-Number: 37549 Gerrit-PatchSet: 1 Gerrit-Owner: Xiang Wang <merle(a)hardenedlinux.org> Gerrit-MessageType: newchange

2 6

← Newer
1
...
5
6
7
8
9
10
11
...
283
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit June 2020