coreboot-gerrit June 2020

coreboot-gerrit@coreboot.org

1 participants
2553 discussions

Change in ...coreboot[master]: src/Kconfig: Move DRAM section to 'Devices' menu
by HAOUAS Elyes (Code Review) 14 Nov '22

14 Nov '22

HAOUAS Elyes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32882 Change subject: src/Kconfig: Move DRAM section to 'Devices' menu ...................................................................... src/Kconfig: Move DRAM section to 'Devices' menu This moves DRAM to 'Devices' menu and allow to change default DIMM_MAX value if needed. Change-Id: I7aa5436c6ff5fef53fde2081e902d793f3581c1e Signed-off-by: Elyes HAOUAS <ehaouas(a)noos.fr> --- M src/Kconfig M src/device/Kconfig 2 files changed, 24 insertions(+), 25 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/82/32882/1 diff --git a/src/Kconfig b/src/Kconfig index 2c9dc4a..d30aa99 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -1158,31 +1158,6 @@ implies configurability usually found on SoCs, particularly the ability to control internal pull resistors. -config GENERIC_SPD_BIN - bool - help - If enabled, add support for adding spd.hex files in cbfs as spd.bin - and locating it runtime to load SPD. Additionally provide provision to - fetch SPD over SMBus. - -config DIMM_MAX - int - default 4 - help - Total number of memory DIMM slots available on motherboard. - It is multiplication of number of channel to number of DIMMs per - channel - -config DIMM_SPD_SIZE - int - default 256 - help - Total SPD size that will be used for DIMM. - Ex: DDR3 256, DDR4 512. - -config SPD_READ_BY_WORD - bool - config BOOTBLOCK_CUSTOM # To be selected by arch, SoC or mainboard if it does not want use the normal # src/lib/bootblock.c#main() C entry point. diff --git a/src/device/Kconfig b/src/device/Kconfig index 0539062..d4cacec 100644 --- a/src/device/Kconfig +++ b/src/device/Kconfig @@ -681,5 +681,29 @@ be useful for debugging or on platforms where a driver for the real I2C controller is not (yet) available. The platform code needs to provide bindings to manually toggle I2C lines. +config GENERIC_SPD_BIN + bool + help + If enabled, add support for adding spd.hex files in cbfs as spd.bin + and locating it runtime to load SPD. Additionally provide provision to + fetch SPD over SMBus. + +config DIMM_MAX + int "Total number of memory DIMM slots" + default 4 + help + Total number of memory DIMM slots available on motherboard. + It is multiplication of number of channel to number of DIMMs per + channel + +config DIMM_SPD_SIZE + int + default 256 + help + Total SPD size that will be used for DIMM. + Ex: DDR3 256, DDR4 512. + +config SPD_READ_BY_WORD + bool endmenu -- To view, visit https://review.coreboot.org/c/coreboot/+/32882 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I7aa5436c6ff5fef53fde2081e902d793f3581c1e Gerrit-Change-Number: 32882 Gerrit-PatchSet: 1 Gerrit-Owner: HAOUAS Elyes <ehaouas(a)noos.fr> Gerrit-MessageType: newchange

5 8

Change in coreboot[master]: mb/supermicro/x11: fix cmos layout and add a default config
by Michael Niewöhner (Code Review) 13 Nov '22

13 Nov '22

Michael Niewöhner has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35526 ) Change subject: mb/supermicro/x11: fix cmos layout and add a default config ...................................................................... mb/supermicro/x11: fix cmos layout and add a default config This fixes the error that power_on_after_fail could not be found, adds the missing nmi option and adds a default config. Change-Id: I10b0aa71fa7916b01e93e16cbd81e427fd14f6a4 Signed-off-by: Michael Niewöhner <foss(a)mniewoehner.de> --- M src/mainboard/supermicro/x11-lga1151-series/Kconfig A src/mainboard/supermicro/x11-lga1151-series/cmos.default M src/mainboard/supermicro/x11-lga1151-series/cmos.layout 3 files changed, 9 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/26/35526/1 diff --git a/src/mainboard/supermicro/x11-lga1151-series/Kconfig b/src/mainboard/supermicro/x11-lga1151-series/Kconfig index 3aaf1d3..68a3c94 100644 --- a/src/mainboard/supermicro/x11-lga1151-series/Kconfig +++ b/src/mainboard/supermicro/x11-lga1151-series/Kconfig @@ -4,6 +4,7 @@ select HAVE_ACPI_RESUME select HAVE_ACPI_TABLES select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT select SOC_INTEL_KABYLAKE select SKYLAKE_SOC_PCH_H select MAINBOARD_HAS_LPC_TPM diff --git a/src/mainboard/supermicro/x11-lga1151-series/cmos.default b/src/mainboard/supermicro/x11-lga1151-series/cmos.default new file mode 100644 index 0000000..45a860b --- /dev/null +++ b/src/mainboard/supermicro/x11-lga1151-series/cmos.default @@ -0,0 +1,4 @@ +boot_option=Fallback +debug_level=Debug +power_on_after_fail=Enable +nmi=Enable diff --git a/src/mainboard/supermicro/x11-lga1151-series/cmos.layout b/src/mainboard/supermicro/x11-lga1151-series/cmos.layout index 201ca33..e1c6aed 100644 --- a/src/mainboard/supermicro/x11-lga1151-series/cmos.layout +++ b/src/mainboard/supermicro/x11-lga1151-series/cmos.layout @@ -30,6 +30,10 @@ 395 4 e 6 debug_level 448 128 r 0 vbnv +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail + # coreboot config options: check sums 984 16 h 0 check_sum -- To view, visit https://review.coreboot.org/c/coreboot/+/35526 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I10b0aa71fa7916b01e93e16cbd81e427fd14f6a4 Gerrit-Change-Number: 35526 Gerrit-PatchSet: 1 Gerrit-Owner: Michael Niewöhner Gerrit-MessageType: newchange

6 25

Change in coreboot[master]: [WIP]security/intel: Add option to eanble SMM flash access only
by Patrick Rudolph (Code Review) 04 Nov '22

04 Nov '22

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/40830 ) Change subject: [WIP]security/intel: Add option to eanble SMM flash access only ...................................................................... [WIP]security/intel: Add option to eanble SMM flash access only On platforms where the boot media can be updated externally, for e.g. using a BMC, add the possibility to enable writes in SMM only. This allows to protect the BIOS region even without the use of vboot, but keeps the SMMSTORE working for the use in payloads. UNTESTED. Change-Id: I157db885b5f1d0f74009ede6fb2342b20d9429fa Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/security/lockdown/Kconfig M src/soc/intel/common/pch/lockdown/lockdown.c M src/southbridge/intel/bd82x6x/lpc.c M src/southbridge/intel/common/spi.c M src/southbridge/intel/common/spi.h M src/southbridge/intel/ibexpeak/lpc.c M src/southbridge/intel/lynxpoint/lpc.c M src/southbridge/intel/lynxpoint/smi.c 8 files changed, 52 insertions(+), 43 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/30/40830/1 diff --git a/src/security/lockdown/Kconfig b/src/security/lockdown/Kconfig index d24c5e5..dbe6840 100644 --- a/src/security/lockdown/Kconfig +++ b/src/security/lockdown/Kconfig @@ -99,3 +99,13 @@ possible. This option prevents using write protecting facilities in ramstage, like the MRC cache for example. Use this option if you don't trust code running after verstage. + +config BOOTMEDIA_SMM_BWP + bool "Boot media only writable in SMM" + depends on ARCH_X86 + depends on HAVE_SMI_HANDLER + select SOC_INTEL_COMMON_BLOCK_SMM_TCO_ENABLE if SOC_INTEL_COMMON_BLOCK + help + Enable flash writes in SMM only. Select this if you want to secure + the SMM_STORE and don't need to update coreboot using the + internal controller. diff --git a/src/soc/intel/common/pch/lockdown/lockdown.c b/src/soc/intel/common/pch/lockdown/lockdown.c index a00e5c0..768c4cd 100644 --- a/src/soc/intel/common/pch/lockdown/lockdown.c +++ b/src/soc/intel/common/pch/lockdown/lockdown.c @@ -62,6 +62,12 @@ /* BIOS Interface Lock */ fast_spi_set_bios_interface_lock_down(); + /* Only allow writes in SMM */ + if (CONFIG(BOOTMEDIA_SMM_BWP)) { + fast_spi_set_eiss(); + fast_spi_enable_wp(); + } + /* BIOS Lock */ fast_spi_set_lock_enable(); } diff --git a/src/southbridge/intel/bd82x6x/lpc.c b/src/southbridge/intel/bd82x6x/lpc.c index 278e90a..78bfb39 100644 --- a/src/southbridge/intel/bd82x6x/lpc.c +++ b/src/southbridge/intel/bd82x6x/lpc.c @@ -416,16 +416,6 @@ } } -static void pch_disable_smm_only_flashing(struct device *dev) -{ - u8 reg8; - - printk(BIOS_SPEW, "Enabling BIOS updates outside of SMM... "); - reg8 = pci_read_config8(dev, BIOS_CNTL); - reg8 &= ~(1 << 5); - pci_write_config8(dev, BIOS_CNTL, reg8); -} - static void pch_fixups(struct device *dev) { u8 gen_pmcon_2; @@ -579,8 +569,6 @@ /* Interrupt 9 should be level triggered (SCI) */ i8259_configure_irq_trigger(9, 1); - pch_disable_smm_only_flashing(dev); - pch_set_acpi_mode(); pch_fixups(dev); diff --git a/src/southbridge/intel/common/spi.c b/src/southbridge/intel/common/spi.c index 5e967af..253d33f 100644 --- a/src/southbridge/intel/common/spi.c +++ b/src/southbridge/intel/common/spi.c @@ -35,6 +35,10 @@ #define HSFC_FCYCLE (0x3 << HSFC_FCYCLE_OFF) #define HSFC_FDBC_OFF 8 /* 8-13: Flash Data Byte Count */ #define HSFC_FDBC (0x3f << HSFC_FDBC_OFF) +#define BIOS_CNTL 0xdc +#define LPC_BC_WE (1 << 0) /* WE */ +#define LPC_BC_LE (1 << 1) /* LE */ +#define LPC_BC_EISS (1 << 5) /* EISS */ static int spi_is_multichip(void); @@ -293,7 +297,6 @@ void spi_init(void) { - uint8_t bios_cntl; struct ich9_spi_regs *ich9_spi; struct ich7_spi_regs *ich7_spi; uint16_t hsfs; @@ -345,10 +348,7 @@ if (CONFIG(SOUTHBRIDGE_INTEL_I82801GX) || CONFIG(SOUTHBRIDGE_INTEL_COMMON_SPI_ICH9)) { /* Disable the BIOS write protect so write commands are allowed. */ - bios_cntl = pci_read_config8(dev, 0xdc); - /* Deassert SMM BIOS Write Protect Disable. */ - bios_cntl &= ~(1 << 5); - pci_write_config8(dev, 0xdc, bios_cntl | 0x1); + spi_smm_only_flashing(0); } } @@ -1108,12 +1108,35 @@ writeb_(spi_config->ops[i].op, &cntlr.opmenu[i]); } writew_(optype, cntlr.optype); + + spi_smm_only_flashing(CONFIG(BOOTMEDIA_SMM_BWP)); } __weak void intel_southbridge_override_spi(struct intel_swseq_spi_config *spi_config) { } +void spi_smm_only_flashing(bool enable) +{ + pci_devfn_t dev = PCI_DEV(0, 31, 0); + u8 reg8 = pci_read_config8(dev, BIOS_CNTL); + + if (reg8 & LPC_BC_LE) + return; + + if (enable) { + reg8 |= LPC_BC_EISS; + reg8 &= ~LPC_BC_WE; + } else { + reg8 &= ~LPC_BC_EISS; + reg8 |= LPC_BC_WE; + } + pci_write_config8(dev, BIOS_CNTL, reg8); + + printk(BIOS_SPEW, "BIOS updates outside of SMM %s\n", + enable ? "enabled" : "disabled"); +} + static const struct spi_ctrlr spi_ctrlr = { .xfer_vector = xfer_vectors, .max_xfer_size = member_size(struct ich9_spi_regs, fdata), diff --git a/src/southbridge/intel/common/spi.h b/src/southbridge/intel/common/spi.h index 3b8410c..ad1cb27 100644 --- a/src/southbridge/intel/common/spi.h +++ b/src/southbridge/intel/common/spi.h @@ -32,6 +32,7 @@ struct intel_spi_op ops[8]; }; +void spi_smm_only_flashing(bool enable); void spi_finalize_ops(void); void intel_southbridge_override_spi(struct intel_swseq_spi_config *spi_config); diff --git a/src/southbridge/intel/ibexpeak/lpc.c b/src/southbridge/intel/ibexpeak/lpc.c index 395919e..67c03fa 100644 --- a/src/southbridge/intel/ibexpeak/lpc.c +++ b/src/southbridge/intel/ibexpeak/lpc.c @@ -420,16 +420,6 @@ } } -static void pch_disable_smm_only_flashing(struct device *dev) -{ - u8 reg8; - - printk(BIOS_SPEW, "Enabling BIOS updates outside of SMM... "); - reg8 = pci_read_config8(dev, BIOS_CNTL); - reg8 &= ~(1 << 5); - pci_write_config8(dev, BIOS_CNTL, reg8); -} - static void pch_fixups(struct device *dev) { /* @@ -482,8 +472,6 @@ /* Interrupt 9 should be level triggered (SCI) */ i8259_configure_irq_trigger(9, 1); - pch_disable_smm_only_flashing(dev); - pch_set_acpi_mode(); pch_fixups(dev); diff --git a/src/southbridge/intel/lynxpoint/lpc.c b/src/southbridge/intel/lynxpoint/lpc.c index d9ef5cc..dafb901 100644 --- a/src/southbridge/intel/lynxpoint/lpc.c +++ b/src/southbridge/intel/lynxpoint/lpc.c @@ -481,16 +481,6 @@ } } -static void pch_disable_smm_only_flashing(struct device *dev) -{ - u8 reg8; - - printk(BIOS_SPEW, "Enabling BIOS updates outside of SMM... "); - reg8 = pci_read_config8(dev, BIOS_CNTL); - reg8 &= ~(1 << 5); - pci_write_config8(dev, BIOS_CNTL, reg8); -} - static void pch_fixups(struct device *dev) { u8 gen_pmcon_2; @@ -549,8 +539,6 @@ /* Interrupt 9 should be level triggered (SCI) */ i8259_configure_irq_trigger(9, 1); - pch_disable_smm_only_flashing(dev); - pch_set_acpi_mode(); pch_fixups(dev); diff --git a/src/southbridge/intel/lynxpoint/smi.c b/src/southbridge/intel/lynxpoint/smi.c index 05b5bb5..82e96f3 100644 --- a/src/southbridge/intel/lynxpoint/smi.c +++ b/src/southbridge/intel/lynxpoint/smi.c @@ -40,6 +40,8 @@ void smm_southbridge_enable_smi(void) { + u32 mask; + printk(BIOS_DEBUG, "Enabling SMIs.\n"); /* Configure events */ enable_pm1(PWRBTN_EN | GBL_EN); @@ -49,11 +51,14 @@ * - on APMC writes (io 0xb2) * - on writes to SLP_EN (sleep states) * - on writes to GBL_RLS (bios commands) + * - on TCO events * No SMIs: * - on microcontroller writes (io 0x62/0x66) - * - on TCO events */ - enable_smi(APMC_EN | SLP_SMI_EN | GBL_SMI_EN | EOS); + mask = APMC_EN | SLP_SMI_EN | GBL_SMI_EN | EOS; + if (CONFIG(BOOTMEDIA_SMM_BWP)) + mask |= TCO_EN; + enable_smi(mask); } static void __unused southbridge_trigger_smi(void) -- To view, visit https://review.coreboot.org/c/coreboot/+/40830 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I157db885b5f1d0f74009ede6fb2342b20d9429fa Gerrit-Change-Number: 40830 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

6 48

Change in coreboot[master]: [TEST] Add support for link time optimization
by Jacob Garber (Code Review) 02 Nov '22

02 Nov '22

Jacob Garber has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/38989 ) Change subject: [TEST] Add support for link time optimization ...................................................................... [TEST] Add support for link time optimization - Code generation is not done until after linking, so the compiler must be invoked at all linking stages instead of the linker. As a consequence all linker arguments must be prefixed with -Wl. - Partial linking is not supported. Instead, object files are collected into thin archives that are linked instead. - The dead_code() macro causes linking errors, since dead functions aren't optimized out until after linking has begun. This macro could be replaced with the preprocessor if necessary, or just disabled for LTO builds. - Wrapping libgcc functions causes a symbol mismatch when using LTO. Wrapping these functions was originally done to support alternate regparam values, though AFAICT this isn't used anywhere. Using LTO leads to a ~10% decrease in stage size for QEMU and ~18% for the Thinkpad T500, and both targets boot successfully. Change-Id: I48c31ea8b1b57276125cffdac44c7c16642547ac Signed-off-by: Jacob Garber <jgarber1(a)ualberta.ca> --- M Makefile.inc M src/Kconfig M src/arch/x86/Makefile.inc M src/cpu/x86/smm/Makefile.inc M src/include/assert.h M src/lib/Makefile.inc M src/lib/gcc.c M toolchain.inc M util/xcompile/xcompile 9 files changed, 42 insertions(+), 24 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/89/38989/1 diff --git a/Makefile.inc b/Makefile.inc index 1f18726..b85c11b 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -434,6 +434,10 @@ endif endif +ifeq ($(CONFIG_LTO),y) +CFLAGS_common += -flto -fuse-linker-plugin -fno-fat-lto-objects +endif + ADAFLAGS_common += -gnatp ADAFLAGS_common += -Wuninitialized -Wall -Werror ADAFLAGS_common += -pipe -g -nostdinc @@ -478,7 +482,7 @@ # Disable style checks for now ADAFLAGS_common += -gnatyN -LDFLAGS_common := --gc-sections -nostdlib -nostartfiles -static --emit-relocs +LDFLAGS_common := -nostdlib -nostartfiles -static -Wl,--emit-relocs,--gc-sections ifeq ($(CONFIG_WARNINGS_ARE_ERRORS),y) CFLAGS_common += -Werror diff --git a/src/Kconfig b/src/Kconfig index f75f942..4b81818 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -116,6 +116,15 @@ For details see https://ccache.samba.org. +config LTO + bool "Use link time optimization" + # Enable now for testing + default y + depends on COMPILER_GCC + help + Compile with link time optimization. This can often decrease the + final binary size, but may increase compilation time. + config FMD_GENPARSER bool "Generate flashmap descriptor parser using flex and bison" default n diff --git a/src/arch/x86/Makefile.inc b/src/arch/x86/Makefile.inc index 534f2ce..75f96d2 100644 --- a/src/arch/x86/Makefile.inc +++ b/src/arch/x86/Makefile.inc @@ -80,7 +80,7 @@ $$(objcbfs)/$(1).debug: $$$$($(1)-libs) $$$$($(1)-objs) @printf " LINK $$(subst $$(obj)/,,$$(@))\n" - $$(LD_$(1)) $$(LDFLAGS_$(1)) -o $$@ -L$$(obj) $$(COMPILER_RT_FLAGS_$(1)) --whole-archive --start-group $$(filter-out %.ld,$$($(1)-objs)) $$($(1)-libs) --no-whole-archive $$(COMPILER_RT_$(1)) --end-group -T $(call src-to-obj,$(1),$(dir)/memlayout.ld) --oformat $(2) + $$(LD_$(1)) $$(LDFLAGS_$(1)) -o $$@ -L$$(obj) $$(COMPILER_RT_FLAGS_$(1)) -Wl,--whole-archive,--start-group $$(filter-out %.ld,$$($(1)-objs)) $$($(1)-libs) -Wl,--no-whole-archive $$(COMPILER_RT_$(1)) -Wl,--end-group -T $(call src-to-obj,$(1),$(dir)/memlayout.ld) -Wl,--oformat=$(2) -LANG=C LC_ALL= $$(OBJCOPY_$(1)) --only-section .illegal_globals $$(@) $$(objcbfs)/$(1)_null.offenders >/dev/null 2>&1 if [ -z "$$$$($$(NM_$(1)) $$(objcbfs)/$(1)_null.offenders 2>&1 | grep 'no symbols')" ];then \ echo "Forbidden global variables in $(1):"; \ @@ -212,11 +212,11 @@ postcar-y += postcar.c postcar-$(CONFIG_COLLECT_TIMESTAMPS_TSC) += timestamp.c -LDFLAGS_postcar += -Map $(objcbfs)/postcar.map +LDFLAGS_postcar += -Wl,-Map,$(objcbfs)/postcar.map $(objcbfs)/postcar.debug: $$(postcar-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_postcar) $(LDFLAGS_postcar) -o $@ -L$(obj) $(COMPILER_RT_FLAGS_postcar) --whole-archive --start-group $(filter-out %.ld,$^) --no-whole-archive $(COMPILER_RT_postcar) --end-group -T $(call src-to-obj,postcar,src/arch/x86/memlayout.ld) + $(LD_postcar) $(LDFLAGS_postcar) -o $@ -L$(obj) $(COMPILER_RT_FLAGS_postcar) -Wl,--whole-archive,--start-group $(filter-out %.ld,$^) -Wl,--no-whole-archive $(COMPILER_RT_postcar) -Wl,--end-group -T $(call src-to-obj,postcar,src/arch/x86/memlayout.ld) $(objcbfs)/postcar.elf: $(objcbfs)/postcar.debug.rmod cp $< $@ @@ -309,18 +309,20 @@ endif -$(objcbfs)/ramstage.debug: $(objgenerated)/ramstage.o $(call src-to-obj,ramstage,src/arch/x86/memlayout.ld) - @printf " CC $(subst $(obj)/,,$(@))\n" - $(LD_ramstage) $(CPPFLAGS) $(LDFLAGS_ramstage) -o $@ -L$(obj) $< -T $(call src-to-obj,ramstage,src/arch/x86/memlayout.ld) - -$(objgenerated)/ramstage.o: $$(ramstage-objs) $(COMPILER_RT_ramstage) $$(ramstage-libs) - @printf " CC $(subst $(obj)/,,$(@))\n" ifeq ($(CONFIG_ARCH_RAMSTAGE_X86_32),y) - $(LD_ramstage) -m elf_i386 -r -o $@ $(COMPILER_RT_FLAGS_ramstage) --whole-archive --start-group $(filter-out %.ld,$(ramstage-objs)) $(ramstage-libs) --no-whole-archive $(COMPILER_RT_ramstage) --end-group +LDFLAGS_ramstage += -Wl,-m,elf_i386 else - $(LD_ramstage) -m elf_x86_64 -r -o $@ $(COMPILER_RT_FLAGS_ramstage) --whole-archive --start-group $(filter-out %.ld,$(ramstage-objs)) $(ramstage-libs) --no-whole-archive $(COMPILER_RT_ramstage) --end-group +LDFLAGS_ramstage += -Wl,-m,elf_x86_64 endif +$(objcbfs)/ramstage.debug: $(objgenerated)/ramstage.a $(call src-to-obj,ramstage,src/arch/x86/memlayout.ld) + @printf " CC $(subst $(obj)/,,$(@))\n" + $(LD_ramstage) $(CPPFLAGS) $(LDFLAGS_ramstage) $(COMPILER_RT_FLAGS_ramstage) -o $@ -L$(obj) -Wl,--whole-archive,--start-group $< -Wl,--no-whole-archive $(COMPILER_RT_ramstage) -Wl,--end-group -T $(call src-to-obj,ramstage,src/arch/x86/memlayout.ld) + +$(objgenerated)/ramstage.a: $$(ramstage-objs) $$(ramstage-libs) + @printf " AR $(subst $(obj)/,,$(@))\n" + $(AR_ramstage) rcT $@ $(filter-out %.ld,$(ramstage-objs)) $(ramstage-libs) + endif # CONFIG_ARCH_RAMSTAGE_X86_32 / CONFIG_ARCH_RAMSTAGE_X86_64 smm-$(CONFIG_IDT_IN_EVERY_STAGE) += exception.c diff --git a/src/cpu/x86/smm/Makefile.inc b/src/cpu/x86/smm/Makefile.inc index 11a4e67..f582a31 100644 --- a/src/cpu/x86/smm/Makefile.inc +++ b/src/cpu/x86/smm/Makefile.inc @@ -25,8 +25,8 @@ smm-generic-ccopts += -D__SMM__ smm-c-deps:=$$(OPTION_TABLE_H) -$(obj)/smm/smm.o: $$(smm-objs) $(COMPILER_RT_smm) - $(LD_smm) -nostdlib -r -o $@ $(COMPILER_RT_FLAGS_smm) --whole-archive --start-group $(smm-objs) --no-whole-archive $(COMPILER_RT_smm) --end-group +$(obj)/smm/smm.a: $$(smm-objs) + $(AR_smm) rcT $@ $^ # change to the target path because objcopy will use the path name in its # ELF symbol names. @@ -53,7 +53,7 @@ # SMM Stub Module. The stub is used as a trampoline for relocation and normal # SMM handling. $(obj)/smmstub/smmstub.o: $$(smmstub-objs) $(COMPILER_RT_smmstub) - $(LD_smmstub) -nostdlib -r -o $@ $(COMPILER_RT_FLAGS_smmstub) --whole-archive --start-group $(smmstub-objs) --no-whole-archive $(COMPILER_RT_smmstub) --end-group + $(LD_smmstub) -nostdlib -r -o $@ $(COMPILER_RT_FLAGS_smmstub) -Wl,--whole-archive,--start-group $(smmstub-objs) -Wl,--no-whole-archive $(COMPILER_RT_smmstub) -Wl,--end-group # Link the SMM stub module with a 0-byte heap. ifeq ($(CONFIG_ARCH_RAMSTAGE_X86_32),y) @@ -72,9 +72,9 @@ # C-based SMM handler. ifeq ($(CONFIG_ARCH_RAMSTAGE_X86_32),y) -$(eval $(call rmodule_link,$(obj)/smm/smm.elf, $(obj)/smm/smm.o, $(CONFIG_SMM_MODULE_HEAP_SIZE),x86_32)) +$(eval $(call rmodule_link,$(obj)/smm/smm.elf, $(obj)/smm/smm.a, $(CONFIG_SMM_MODULE_HEAP_SIZE),x86_32)) else -$(eval $(call rmodule_link,$(obj)/smm/smm.elf, $(obj)/smm/smm.o, $(CONFIG_SMM_MODULE_HEAP_SIZE),x86_64)) +$(eval $(call rmodule_link,$(obj)/smm/smm.elf, $(obj)/smm/smm.a, $(CONFIG_SMM_MODULE_HEAP_SIZE),x86_64)) endif $(obj)/smm/smm: $(obj)/smm/smm.elf.rmod @@ -82,8 +82,8 @@ else # CONFIG_SMM_TSEG -$(obj)/smm/smm: $(obj)/smm/smm.o $(src)/cpu/x86/smm/smm.ld - $(LD_smm) $(LDFLAGS_smm) -o $(obj)/smm/smm.elf -T $(src)/cpu/x86/smm/smm.ld $(obj)/smm/smm.o +$(obj)/smm/smm: $(obj)/smm/smm.a $(src)/cpu/x86/smm/smm.ld + $(LD_smm) $(LDFLAGS_smm) -o $(obj)/smm/smm.elf -T $(src)/cpu/x86/smm/smm.ld -Wl,--whole-archive,--start-group $(obj)/smm/smm.a -Wl,--no-whole-archive $(COMPILER_RT_smm) --end-group $(NM_smm) -n $(obj)/smm/smm.elf | sort > $(obj)/smm/smm.map $(OBJCOPY_smm) -O binary $(obj)/smm/smm.elf $@ diff --git a/src/include/assert.h b/src/include/assert.h index e0db0bc..6901953 100644 --- a/src/include/assert.h +++ b/src/include/assert.h @@ -61,7 +61,8 @@ dead_code_assertion_failed_at_line_##line(); \ } while (0) #define _dead_code(line) __dead_code(line) -#define dead_code() _dead_code(__LINE__) +//#define dead_code() _dead_code(__LINE__) +#define dead_code() /* This can be used in the context of an expression of type 'type'. */ #define dead_code_t(type) ({ \ diff --git a/src/lib/Makefile.inc b/src/lib/Makefile.inc index 2333f64..ac6d624 100644 --- a/src/lib/Makefile.inc +++ b/src/lib/Makefile.inc @@ -291,7 +291,7 @@ # rmdoule is named $(1).rmod define rmodule_link $(strip $(1)): $(strip $(2)) $$(COMPILER_RT_rmodules_$(4)) $(call src-to-obj,rmodules_$(4),src/lib/rmodule.ld) | $$(RMODTOOL) - $$(LD_rmodules_$(4)) $$(LDFLAGS_rmodules_$(4)) $(RMODULE_LDFLAGS) -T $(call src-to-obj,rmodules_$(4),src/lib/rmodule.ld) --defsym=__heap_size=$(strip $(3)) -o $$@ --whole-archive --start-group $(filter-out %.ld,$(2)) --end-group + $$(LD_rmodules_$(4)) $$(LDFLAGS_rmodules_$(4)) $(RMODULE_LDFLAGS) -T $(call src-to-obj,rmodules_$(4),src/lib/rmodule.ld) -Wl,--defsym=__heap_size=$(strip $(3)) -o $$@ -Wl,--whole-archive,--start-group $(filter-out %.ld,$(2)) -Wl,--no-whole-archive $$(COMPILER_RT_rmodules_$(4)) -Wl,--end-group $$(NM_rmodules_$(4)) -n $$@ > $$(basename $$(a)).map endef diff --git a/src/lib/gcc.c b/src/lib/gcc.c index 5a93f45..66a7788 100644 --- a/src/lib/gcc.c +++ b/src/lib/gcc.c @@ -24,6 +24,7 @@ /* TODO: maybe this code should move to arch/x86 as architecture * specific implementations may vary */ +#if 0 #define WRAP_LIBGCC_CALL(type, name) \ asmlinkage type __real_##name(type a, type b); \ type __wrap_##name(type a, type b); \ @@ -33,3 +34,4 @@ WRAP_LIBGCC_CALL(unsigned long long, __udivdi3) WRAP_LIBGCC_CALL(long long, __moddi3) WRAP_LIBGCC_CALL(unsigned long long, __umoddi3) +#endif diff --git a/toolchain.inc b/toolchain.inc index 865227b..f52a518 100644 --- a/toolchain.inc +++ b/toolchain.inc @@ -117,7 +117,7 @@ $(error Check your .config file for CONFIG_ARCH_$(1)_* settings)) CC_$(1) := $(CC_$(2)) GCC_$(1) := $(GCC_CC_$(2)) -LD_$(1) := $(LD_$(2)) +LD_$(1) := $(CC_$(2)) NM_$(1) := $(NM_$(2)) AR_$(1) := $(AR_$(2)) GNATBIND_$(1) := $(GNATBIND_$(2)) @@ -130,7 +130,7 @@ CPPFLAGS_$(1) = $$(CPPFLAGS_common) $$(CPPFLAGS_$(2)) -D__ARCH_$(2)__ COMPILER_RT_$(1) := $$(COMPILER_RT_$(2)) COMPILER_RT_FLAGS_$(1) := $$(COMPILER_RT_FLAGS_$(2)) -LDFLAGS_$(1) = $$(LDFLAGS_common) $$(LDFLAGS_$(2)) +LDFLAGS_$(1) = $$(CFLAGS_$(1)) $$(LDFLAGS_common) $$(LDFLAGS_$(2)) endef # define_class: Allows defining any program as dynamic class and compiler tool diff --git a/util/xcompile/xcompile b/util/xcompile/xcompile index 3203d71..8515813 100755 --- a/util/xcompile/xcompile +++ b/util/xcompile/xcompile @@ -363,7 +363,7 @@ TCLIST="i386 x86_64" TWIDTH="32" TABI="elf" - CC_RT_EXTRA_GCC="--wrap __divdi3 --wrap __udivdi3 --wrap __moddi3 --wrap __umoddi3" + #CC_RT_EXTRA_GCC="-Wl,--wrap=__divdi3,--wrap=__udivdi3,--wrap=__moddi3,--wrap=__umoddi3" } arch_config_ppc64() { -- To view, visit https://review.coreboot.org/c/coreboot/+/38989 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I48c31ea8b1b57276125cffdac44c7c16642547ac Gerrit-Change-Number: 38989 Gerrit-PatchSet: 1 Gerrit-Owner: Jacob Garber <jgarber1(a)ualberta.ca> Gerrit-Reviewer: Jacob Garber <jgarber1(a)ualberta.ca> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

8 33

Change in coreboot[master]: mb/{lenovo,packardbell}: Enable MEI device
by Evgeny Zinoviev (Code Review) 01 Nov '22

01 Nov '22

Evgeny Zinoviev has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/42412 ) Change subject: mb/{lenovo,packardbell}: Enable MEI device ...................................................................... mb/{lenovo,packardbell}: Enable MEI device Enable the MEI in device trees of some Ibex Peak, Cougar Point and Panther Point boards where they have been disabled. Change-Id: I4327d19d3ed1a93a6466057f6eceed49ab9441c5 Signed-off-by: Evgeny Zinoviev <me(a)ch1p.io> --- M src/mainboard/lenovo/s230u/devicetree.cb M src/mainboard/lenovo/t410/devicetree.cb M src/mainboard/lenovo/t420/devicetree.cb M src/mainboard/lenovo/t420s/devicetree.cb M src/mainboard/lenovo/t430s/devicetree.cb M src/mainboard/lenovo/x131e/devicetree.cb M src/mainboard/lenovo/x220/devicetree.cb M src/mainboard/packardbell/ms2290/devicetree.cb 8 files changed, 12 insertions(+), 8 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/12/42412/1 diff --git a/src/mainboard/lenovo/s230u/devicetree.cb b/src/mainboard/lenovo/s230u/devicetree.cb index 6f4e608..9107f7c 100644 --- a/src/mainboard/lenovo/s230u/devicetree.cb +++ b/src/mainboard/lenovo/s230u/devicetree.cb @@ -51,7 +51,7 @@ register "spi_lvscc" = "0x2005" device pci 14.0 on end # USB 3.0 Controller - device pci 16.0 off end # Management Engine Interface 1 + device pci 16.0 on end # Management Engine Interface 1 device pci 16.1 off end # Management Engine Interface 2 device pci 16.2 off end # Management Engine IDE-R device pci 16.3 off end # Management Engine KT diff --git a/src/mainboard/lenovo/t410/devicetree.cb b/src/mainboard/lenovo/t410/devicetree.cb index 2de774d..fa63971 100644 --- a/src/mainboard/lenovo/t410/devicetree.cb +++ b/src/mainboard/lenovo/t410/devicetree.cb @@ -56,7 +56,9 @@ register "pcie_hotplug_map" = "{ 0, 0, 0, 1, 0, 0, 0, 0 }" - device pci 16.0 off end # MEI + device pci 16.0 on # MEI + subsystemid 0x17aa 0x215f + end device pci 16.2 on # IDE/SATA subsystemid 0x17aa 0x2161 end diff --git a/src/mainboard/lenovo/t420/devicetree.cb b/src/mainboard/lenovo/t420/devicetree.cb index 5ac9cf5..795c372 100644 --- a/src/mainboard/lenovo/t420/devicetree.cb +++ b/src/mainboard/lenovo/t420/devicetree.cb @@ -69,7 +69,7 @@ register "spi_uvscc" = "0x2005" register "spi_lvscc" = "0x2005" - device pci 16.0 off end # Management Engine Interface 1 + device pci 16.0 on end # Management Engine Interface 1 device pci 16.1 off end # Management Engine Interface 2 device pci 16.2 off end # Management Engine IDE-R device pci 16.3 off end # Management Engine KT diff --git a/src/mainboard/lenovo/t420s/devicetree.cb b/src/mainboard/lenovo/t420s/devicetree.cb index b3399c3..7a2f669 100644 --- a/src/mainboard/lenovo/t420s/devicetree.cb +++ b/src/mainboard/lenovo/t420s/devicetree.cb @@ -71,7 +71,7 @@ register "spi_uvscc" = "0x2005" register "spi_lvscc" = "0x2005" - device pci 16.0 off end # Management Engine Interface 1 + device pci 16.0 on end # Management Engine Interface 1 device pci 16.1 off end # Management Engine Interface 2 device pci 16.2 off end # Management Engine IDE-R device pci 16.3 off end # Management Engine KT diff --git a/src/mainboard/lenovo/t430s/devicetree.cb b/src/mainboard/lenovo/t430s/devicetree.cb index 40c706e..694f258 100644 --- a/src/mainboard/lenovo/t430s/devicetree.cb +++ b/src/mainboard/lenovo/t430s/devicetree.cb @@ -72,7 +72,7 @@ register "spi_lvscc" = "0x2005" device pci 14.0 on end # USB 3.0 Controller - device pci 16.0 off end # Management Engine Interface 1 + device pci 16.0 on end # Management Engine Interface 1 device pci 16.1 off end # Management Engine Interface 2 device pci 16.2 off end # Management Engine IDE-R device pci 16.3 off end # Management Engine KT diff --git a/src/mainboard/lenovo/x131e/devicetree.cb b/src/mainboard/lenovo/x131e/devicetree.cb index c84d7ea..b1a1131 100644 --- a/src/mainboard/lenovo/x131e/devicetree.cb +++ b/src/mainboard/lenovo/x131e/devicetree.cb @@ -68,7 +68,7 @@ register "spi_lvscc" = "0x2005" device pci 14.0 on end # USB 3.0 Controller - device pci 16.0 off end # Management Engine Interface 1 + device pci 16.0 on end # Management Engine Interface 1 device pci 16.1 off end # Management Engine Interface 2 device pci 16.2 off end # Management Engine IDE-R device pci 16.3 off end # Management Engine KT diff --git a/src/mainboard/lenovo/x220/devicetree.cb b/src/mainboard/lenovo/x220/devicetree.cb index bfb9da3..0c8fe79 100644 --- a/src/mainboard/lenovo/x220/devicetree.cb +++ b/src/mainboard/lenovo/x220/devicetree.cb @@ -68,7 +68,7 @@ register "spi_uvscc" = "0x2005" register "spi_lvscc" = "0x2005" - device pci 16.0 off end # Management Engine Interface 1 + device pci 16.0 on end # Management Engine Interface 1 device pci 16.1 off end # Management Engine Interface 2 device pci 16.2 off end # Management Engine IDE-R device pci 16.3 off end # Management Engine KT diff --git a/src/mainboard/packardbell/ms2290/devicetree.cb b/src/mainboard/packardbell/ms2290/devicetree.cb index 50e648f..b614e83 100644 --- a/src/mainboard/packardbell/ms2290/devicetree.cb +++ b/src/mainboard/packardbell/ms2290/devicetree.cb @@ -48,7 +48,9 @@ register "alt_gp_smi_en" = "0x0000" register "gen1_dec" = "0x040069" - device pci 16.0 off end # Management Engine Interface 1 + device pci 16.0 on # Management Engine Interface 1 + subsystemid 0x1025 0x0379 + end device pci 16.1 off end # Management Engine Interface 2 device pci 16.2 off end # Management Engine IDE-R, only management boot device pci 16.3 off end # Management Engine KT -- To view, visit https://review.coreboot.org/c/coreboot/+/42412 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4327d19d3ed1a93a6466057f6eceed49ab9441c5 Gerrit-Change-Number: 42412 Gerrit-PatchSet: 1 Gerrit-Owner: Evgeny Zinoviev <me(a)ch1p.io> Gerrit-MessageType: newchange

3 8

Change in ...coreboot[master]: mb/apple: Add MacBook Air 5,2 (A1466)
by Evgeny Zinoviev (Code Review) 29 Oct '22

29 Oct '22

Evgeny Zinoviev has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32604 Change subject: mb/apple: Add MacBook Air 5,2 (A1466) ...................................................................... mb/apple: Add MacBook Air 5,2 (A1466) This is WIP. Change-Id: I1ebe6f87a8254871698be74f913b9d969d722447 Signed-off-by: Evgeny Zinoviev <me(a)ch1p.io> --- A src/mainboard/apple/macbookair5_2/Kconfig A src/mainboard/apple/macbookair5_2/Kconfig.name A src/mainboard/apple/macbookair5_2/Makefile.inc A src/mainboard/apple/macbookair5_2/acpi/ec.asl A src/mainboard/apple/macbookair5_2/acpi/platform.asl A src/mainboard/apple/macbookair5_2/acpi/superio.asl A src/mainboard/apple/macbookair5_2/acpi_tables.c A src/mainboard/apple/macbookair5_2/board_info.txt A src/mainboard/apple/macbookair5_2/devicetree.cb A src/mainboard/apple/macbookair5_2/dsdt.asl A src/mainboard/apple/macbookair5_2/gma-mainboard.ads A src/mainboard/apple/macbookair5_2/gnvs.c A src/mainboard/apple/macbookair5_2/gpio.c A src/mainboard/apple/macbookair5_2/hda_verb.c A src/mainboard/apple/macbookair5_2/mainboard.c A src/mainboard/apple/macbookair5_2/romstage.c A src/mainboard/apple/macbookair5_2/spd.bin 17 files changed, 843 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/04/32604/1 diff --git a/src/mainboard/apple/macbookair5_2/Kconfig b/src/mainboard/apple/macbookair5_2/Kconfig new file mode 100644 index 0000000..853021f --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/Kconfig @@ -0,0 +1,55 @@ +if BOARD_APPLE_MACBOOKAIR5_2 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_8192 + select EC_ACPI + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_INT15 + select NORTHBRIDGE_INTEL_IVYBRIDGE + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_C216 + select SYSTEM_TYPE_LAPTOP + select USE_NATIVE_RAMINIT + select MAINBOARD_HAS_LIBGFXINIT + select GFX_GMA_INTERNAL_IS_LVDS + select SERIRQ_CONTINUOUS_MODE + +config MAINBOARD_DIR + string + default apple/macbookair5_2 + +config MAINBOARD_PART_NUMBER + string + default "MacBookAir5,2" + +config VGA_BIOS_FILE + string + default "pci8086,0166.rom" + +config VGA_BIOS_ID + string + default "8086,0166" + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x7270 + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x8086 + +config DRAM_RESET_GATE_GPIO # FIXME: check this + int + default 60 + +config MAX_CPUS + int + default 8 + +config MAINBOARD_SMBIOS_MANUFACTURER + string + default "Apple Inc." + +endif diff --git a/src/mainboard/apple/macbookair5_2/Kconfig.name b/src/mainboard/apple/macbookair5_2/Kconfig.name new file mode 100644 index 0000000..d8a1fbf --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_APPLE_MACBOOKAIR5_2 + bool "MacBookAir5,2" diff --git a/src/mainboard/apple/macbookair5_2/Makefile.inc b/src/mainboard/apple/macbookair5_2/Makefile.inc new file mode 100644 index 0000000..fd60338 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/Makefile.inc @@ -0,0 +1,7 @@ +romstage-y += gpio.c + +cbfs-files-y += spd.bin +spd.bin-file := spd.bin +spd.bin-type := spd + +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads diff --git a/src/mainboard/apple/macbookair5_2/acpi/ec.asl b/src/mainboard/apple/macbookair5_2/acpi/ec.asl new file mode 100644 index 0000000..f70cb3d --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/acpi/ec.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Device(EC) +{ + Name (_HID, EISAID("PNP0C09")) + Name (_UID, 0) + Name (_GPE, 23) +/* FIXME: EC support */ +} diff --git a/src/mainboard/apple/macbookair5_2/acpi/platform.asl b/src/mainboard/apple/macbookair5_2/acpi/platform.asl new file mode 100644 index 0000000..a17c6ea --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/acpi/platform.asl @@ -0,0 +1,23 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Method(_WAK,1) +{ + /* FIXME: EC support */ + Return(Package(){0,0}) +} + +Method(_PTS,1) +{ + /* FIXME: EC support */ +} diff --git a/src/mainboard/apple/macbookair5_2/acpi/superio.asl b/src/mainboard/apple/macbookair5_2/acpi/superio.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/acpi/superio.asl diff --git a/src/mainboard/apple/macbookair5_2/acpi_tables.c b/src/mainboard/apple/macbookair5_2/acpi_tables.c new file mode 100644 index 0000000..c48f0bd --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/acpi_tables.c @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/bd82x6x/nvs.h> + +/* FIXME: check this function. */ +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + // the lid is open by default. + gnvs->lids = 1; + + gnvs->tcrt = 100; + gnvs->tpsv = 90; +} diff --git a/src/mainboard/apple/macbookair5_2/board_info.txt b/src/mainboard/apple/macbookair5_2/board_info.txt new file mode 100644 index 0000000..cbd72ee --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/board_info.txt @@ -0,0 +1,6 @@ +Category: laptop +ROM protocol: SPI +Flashrom support: n +ROM package: WSON-8 +ROM socketed: n +Release year: 2012 diff --git a/src/mainboard/apple/macbookair5_2/devicetree.cb b/src/mainboard/apple/macbookair5_2/devicetree.cb new file mode 100644 index 0000000..efc5ddb --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/devicetree.cb @@ -0,0 +1,119 @@ +chip northbridge/intel/sandybridge # FIXME: check gfx.ndid and gfx.did + register "gfx.did" = "{ 0x80000410, 0x80000320, 0x80000410, 0x80000410, 0x00000005 }" + #register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }" + register "gfx.link_frequency_270_mhz" = "0" + register "gfx.ndid" = "2" + register "gfx.use_spread_spectrum_clock" = "1" + register "gpu_cpu_backlight" = "0x00000710" + register "gpu_dp_b_hotplug" = "4" + register "gpu_dp_c_hotplug" = "4" + register "gpu_dp_d_hotplug" = "4" + register "gpu_panel_port_select" = "1" + register "gpu_panel_power_backlight_off_delay" = "2000" + register "gpu_panel_power_backlight_on_delay" = "10" + register "gpu_panel_power_cycle_delay" = "6" + register "gpu_panel_power_down_delay" = "740" + register "gpu_panel_power_up_delay" = "2000" + register "gpu_pch_backlight" = "0x07100710" + device cpu_cluster 0x0 on + chip cpu/intel/model_206ax # FIXME: check all registers + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0x0 on end + device lapic 0xacac off end + end + end + + register "pci_mmio_size" = "2048" + + device domain 0x0 on + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "docking_supported" = "0" + register "gen1_dec" = "0x000c0681" + register "gen2_dec" = "0x000c1641" + register "gen3_dec" = "0x001c0301" + register "gen4_dec" = "0x00fc0701" + register "gpi7_routing" = "2" + register "p_cnt_throttling_supported" = "1" + register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" + register "pcie_port_coalesce" = "1" + register "sata_interface_speed_support" = "0x3" + register "sata_port_map" = "0x1" + register "spi_lvscc" = "0x0" + register "spi_uvscc" = "0x2005" + register "superspeed_capable_ports" = "0x0000000f" + register "xhci_overcurrent_mapping" = "0x08040201" + register "xhci_switchable_ports" = "0x0000000f" + device pci 14.0 on # USB 3.0 Controller + subsystemid 0x8086 0x7270 + end + device pci 16.0 on # Management Engine Interface 1 + subsystemid 0x8086 0x7270 + end + device pci 16.1 off # Management Engine Interface 2 + end + device pci 16.2 off # Management Engine IDE-R + end + device pci 16.3 off # Management Engine KT + end + device pci 19.0 off # Intel Gigabit Ethernet + end + device pci 1a.0 on # USB2 EHCI #2 + subsystemid 0x8086 0x7270 + end + device pci 1b.0 on # High Definition Audio Audio controller + subsystemid 0x8086 0x7270 + end + device pci 1c.0 on # PCIe Port #1 + subsystemid 0x8086 0x7270 + end + device pci 1c.1 on # PCIe Port #2 + subsystemid 0x8086 0x7270 + end + device pci 1c.2 off # PCIe Port #3 + end + device pci 1c.3 off # PCIe Port #4 + end + device pci 1c.4 on # PCIe Port #5 + subsystemid 0x8086 0x7270 + end + device pci 1c.5 off # PCIe Port #6 + end + device pci 1c.6 off # PCIe Port #7 + end + device pci 1c.7 off # PCIe Port #8 + end + device pci 1d.0 on # USB2 EHCI #1 + subsystemid 0x8086 0x7270 + end + device pci 1e.0 off # PCI bridge + end + device pci 1f.0 on # LPC bridge PCI-LPC bridge + subsystemid 0x8086 0x7270 + end + device pci 1f.2 on # SATA Controller 1 + subsystemid 0x8086 0x7270 + end + device pci 1f.3 on # SMBus + subsystemid 0x8086 0x7270 + end + device pci 1f.5 off # SATA Controller 2 + end + device pci 1f.6 off # Thermal + end + end + device pci 00.0 on # Host bridge Host bridge + subsystemid 0x106b 0x00fe + end + device pci 01.0 off # PCIe Bridge for discrete graphics + end + device pci 02.0 on # Internal graphics VGA controller + subsystemid 0x106b 0x00fe + end + end +end diff --git a/src/mainboard/apple/macbookair5_2/dsdt.asl b/src/mainboard/apple/macbookair5_2/dsdt.asl new file mode 100644 index 0000000..455ac17 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/dsdt.asl @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define BRIGHTNESS_UP \_SB.PCI0.GFX0.INCB +#define BRIGHTNESS_DOWN \_SB.PCI0.GFX0.DECB +#define ACPI_VIDEO_DEVICE \_SB.PCI0.GFX0 + +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI 2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 // OEM revision +) +{ + /* Some generic macros */ + #include "acpi/platform.asl" + #include <cpu/intel/common/acpi/cpu.asl> + #include <southbridge/intel/bd82x6x/acpi/platform.asl> + /* global NVS and variables. */ + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> + + Device (\_SB.PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } +} diff --git a/src/mainboard/apple/macbookair5_2/gma-mainboard.ads b/src/mainboard/apple/macbookair5_2/gma-mainboard.ads new file mode 100644 index 0000000..d4a5d7d --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/gma-mainboard.ads @@ -0,0 +1,34 @@ +-- +-- This file is part of the coreboot project. +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 2 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + ports : constant Port_List := + (DP1, + DP2, + DP3, + HDMI1, + HDMI2, + HDMI3, + Analog, + Internal, + others => Disabled); + +end GMA.Mainboard; diff --git a/src/mainboard/apple/macbookair5_2/gnvs.c b/src/mainboard/apple/macbookair5_2/gnvs.c new file mode 100644 index 0000000..def9e5f --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/gnvs.c @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/bd82x6x/nvs.h> + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + /* the lid is open by default. */ + gnvs->lids = 1; + + gnvs->tcrt = 100; + gnvs->tpsv = 90; +} diff --git a/src/mainboard/apple/macbookair5_2/gpio.c b/src/mainboard/apple/macbookair5_2/gpio.c new file mode 100644 index 0000000..9f2cd14 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/gpio.c @@ -0,0 +1,242 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_GPIO, + .gpio11 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio16 = GPIO_DIR_OUTPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_OUTPUT, + .gpio21 = GPIO_DIR_OUTPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio23 = GPIO_DIR_OUTPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio26 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio8 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_LOW, + .gpio15 = GPIO_LEVEL_HIGH, + .gpio16 = GPIO_LEVEL_LOW, + .gpio19 = GPIO_LEVEL_HIGH, + .gpio21 = GPIO_LEVEL_LOW, + .gpio22 = GPIO_LEVEL_LOW, + .gpio23 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio11 = GPIO_RESET_RSMRST, + .gpio15 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio2 = GPIO_INVERT, + .gpio4 = GPIO_INVERT, + .gpio5 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_GPIO, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_GPIO, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_GPIO, + .gpio55 = GPIO_MODE_GPIO, + .gpio56 = GPIO_MODE_GPIO, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_GPIO, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio33 = GPIO_DIR_INPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_OUTPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_OUTPUT, + .gpio49 = GPIO_DIR_OUTPUT, + .gpio50 = GPIO_DIR_INPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_OUTPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_OUTPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio34 = GPIO_LEVEL_HIGH, + .gpio35 = GPIO_LEVEL_LOW, + .gpio36 = GPIO_LEVEL_LOW, + .gpio48 = GPIO_LEVEL_HIGH, + .gpio49 = GPIO_LEVEL_LOW, + .gpio51 = GPIO_LEVEL_HIGH, + .gpio52 = GPIO_LEVEL_LOW, + .gpio53 = GPIO_LEVEL_HIGH, + .gpio54 = GPIO_LEVEL_LOW, + .gpio55 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_GPIO, + .gpio65 = GPIO_MODE_GPIO, + .gpio66 = GPIO_MODE_GPIO, + .gpio67 = GPIO_MODE_GPIO, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_GPIO, + .gpio71 = GPIO_MODE_GPIO, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_GPIO, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_OUTPUT, + .gpio65 = GPIO_DIR_OUTPUT, + .gpio66 = GPIO_DIR_OUTPUT, + .gpio67 = GPIO_DIR_OUTPUT, + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_INPUT, + .gpio71 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_LOW, + .gpio65 = GPIO_LEVEL_LOW, + .gpio66 = GPIO_LEVEL_LOW, + .gpio67 = GPIO_LEVEL_LOW, + .gpio74 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/apple/macbookair5_2/hda_verb.c b/src/mainboard/apple/macbookair5_2/hda_verb.c new file mode 100644 index 0000000..6c8e555 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/hda_verb.c @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x10134206, /* Codec Vendor / Device ID: Cirrus */ + 0x106b5600, /* Subsystem ID */ + + 0x0000000b, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x0, 0x106b5600), + + /* NID 0x09. */ + AZALIA_PIN_CFG(0x0, 0x09, 0x0e2b4030), + + /* NID 0x0a. */ + AZALIA_PIN_CFG(0x0, 0x0a, 0x400000f0), + + /* NID 0x0b. */ + AZALIA_PIN_CFG(0x0, 0x0b, 0x90100120), + + /* NID 0x0c. */ + AZALIA_PIN_CFG(0x0, 0x0c, 0x400000f0), + + /* NID 0x0d. */ + AZALIA_PIN_CFG(0x0, 0x0d, 0x90a00110), + + /* NID 0x0e. */ + AZALIA_PIN_CFG(0x0, 0x0e, 0x400000f0), + + /* NID 0x0f. */ + AZALIA_PIN_CFG(0x0, 0x0f, 0x400000f0), + + /* NID 0x10. */ + AZALIA_PIN_CFG(0x0, 0x10, 0x400000f0), + + /* NID 0x12. */ + AZALIA_PIN_CFG(0x0, 0x12, 0x400000f0), + + /* NID 0x15. */ + AZALIA_PIN_CFG(0x0, 0x15, 0x400000f0), + 0x80862806, /* Codec Vendor / Device ID: Intel */ + 0x80860101, /* Subsystem ID */ + + 0x00000004, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x3, 0x80860101), + + /* NID 0x05. */ + AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), + + /* NID 0x06. */ + AZALIA_PIN_CFG(0x3, 0x06, 0x18560010), + + /* NID 0x07. */ + AZALIA_PIN_CFG(0x3, 0x07, 0x18560010), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/apple/macbookair5_2/mainboard.c b/src/mainboard/apple/macbookair5_2/mainboard.c new file mode 100644 index 0000000..d497c51 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/mainboard.c @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/device.h> +#include <drivers/intel/gma/int15.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <ec/acpi/ec.h> +#include <console/console.h> + +static void mainboard_init(struct device *dev) +{ + /* FIXME: trim this down or remove if necessary */ +// { +// int i; +// const u8 dmp[256] = { +// /* 00 */ 0x40, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 10 */ 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 20 */ 0x00, 0x80, 0x16, 0x16, 0xe0, 0x40, 0x4f, 0x4e, 0x7a, 0x34, 0x35, 0x31, 0x38, 0x31, 0x32, 0x44, +// /* 30 */ 0x4b, 0x52, 0x4e, 0x41, 0x38, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x41, 0x42, +// /* 40 */ 0x43, 0x44, 0x45, 0x00, 0x02, 0x14, 0x11, 0x10, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 50 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 60 */ 0x03, 0x00, 0x00, 0x00, 0x0f, 0x3d, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 70 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 80 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 90 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* a0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* b0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* c0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* d0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* e0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* f0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// }; +// +// printk(BIOS_DEBUG, "Replaying EC dump ..."); +// for (i = 0; i < 256; i++) +// ec_write (i, dmp[i]); +// printk(BIOS_DEBUG, "done\n"); +// } + + RCBA32(0x38c8) = 0x00002005; + RCBA32(0x38c4) = 0x00800000; +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = mainboard_init; + +// /* FIXME: fix those values*/ +// install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, +// GMA_INT15_PANEL_FIT_DEFAULT, +// GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_EDP, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/apple/macbookair5_2/romstage.c b/src/mainboard/apple/macbookair5_2/romstage.c new file mode 100644 index 0000000..6594b15 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/romstage.c @@ -0,0 +1,86 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* FIXME: Check if all includes are needed. */ + +#include <stdint.h> +#include <string.h> +#include <timestamp.h> +#include <arch/byteorder.h> +#include <arch/io.h> +#include <device/mmio.h> +#include <device/pci_ops.h> +#include <device/pnp_ops.h> +#include <console/console.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <northbridge/intel/sandybridge/raminit_native.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/common/gpio.h> +#include <cbfs.h> + +void pch_enable_lpc(void) +{ + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x40, 0x00000401); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0070); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3f0f); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x000c0681); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x000c1641); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x8c, 0x001c0301); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x90, 0x00fc0701); +} + +void mainboard_rcba_config(void) +{ + RCBA32(0x3414) = 0x00000020; +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 0, 0 }, + { 1, 0, 1 }, + { 1, 0, 2 }, + { 1, 0, 3 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, +}; + +void mainboard_early_init(int s3resume) +{ +} + +void mainboard_config_superio(void) +{ +} + +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + void *spd_file; + size_t spd_file_len = 0; + spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD, + &spd_file_len); + if (spd_file && spd_file_len >= 512) { + memcpy(&spd[0], spd_file, 128); + memcpy(&spd[2], spd_file + 256, 128); + } +} diff --git a/src/mainboard/apple/macbookair5_2/spd.bin b/src/mainboard/apple/macbookair5_2/spd.bin new file mode 100644 index 0000000..2e2a6b4 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/spd.bin Binary files differ -- To view, visit https://review.coreboot.org/c/coreboot/+/32604 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I1ebe6f87a8254871698be74f913b9d969d722447 Gerrit-Change-Number: 32604 Gerrit-PatchSet: 1 Gerrit-Owner: Evgeny Zinoviev <me(a)ch1p.com> Gerrit-MessageType: newchange

6 51

Change in coreboot[master]: cpu/x86/Kconfig: Enable LAPIC remap mitigation on likely affect NB
by Arthur Heymans (Code Review) 26 Oct '22

26 Oct '22

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37321 ) Change subject: cpu/x86/Kconfig: Enable LAPIC remap mitigation on likely affect NB ...................................................................... cpu/x86/Kconfig: Enable LAPIC remap mitigation on likely affect NB Pre-sandy bridge hardware is likely affected by the sinkhole vulnerability. Change-Id: I52cb20e0edac62475597b31696f38d0ffc6080de Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/cpu/x86/Kconfig 1 file changed, 3 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/21/37321/1 diff --git a/src/cpu/x86/Kconfig b/src/cpu/x86/Kconfig index efb5fa9..335463d 100644 --- a/src/cpu/x86/Kconfig +++ b/src/cpu/x86/Kconfig @@ -139,9 +139,9 @@ config SMM_LAPIC_REMAP_MITIGATION bool - default y if NORTHBRIDGE_INTEL_I945 - default y if NORTHBRIDGE_INTEL_GM45 - default y if NORTHBRIDGE_INTEL_NEHALEM + default y if NORTHBRIDGE_INTEL_I945 || NORTHBRIDGE_INTEL_GM45 \ + || NORTHBRIDGE_INTEL_X4X || NORTHBRIDGE_INTEL_PINEVIEW \ + || NORTHBRIDGE_INTEL_E7505 default n config SERIALIZED_SMM_INITIALIZATION -- To view, visit https://review.coreboot.org/c/coreboot/+/37321 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I52cb20e0edac62475597b31696f38d0ffc6080de Gerrit-Change-Number: 37321 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

5 12

Change in coreboot[master]: WIP: riscv/mb/qemu: fix DRAM probing
by Philipp Hug (Code Review) 25 Oct '22

25 Oct '22

Philipp Hug has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36486 ) Change subject: WIP: riscv/mb/qemu: fix DRAM probing ...................................................................... WIP: riscv/mb/qemu: fix DRAM probing Current version of qemu raise an exception when accessing invalid memory. Modify the probing code to temporary redirect the exception handler like on ARM platform. TEST=qemu detects RAM size correctly Change-Id: I25860f688c7546714f6fdbce8c8f96da6400813c Signed-off-by: Philipp Hug <philipp(a)hug.cx> --- M src/arch/riscv/Makefile.inc M src/arch/riscv/include/arch/exception.h A src/arch/riscv/ramdetect.c M src/arch/riscv/trap_handler.c M src/arch/riscv/trap_util.S M src/lib/ramdetect.c 6 files changed, 57 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/86/36486/1 diff --git a/src/arch/riscv/Makefile.inc b/src/arch/riscv/Makefile.inc index 0039fab..7465a8f 100644 --- a/src/arch/riscv/Makefile.inc +++ b/src/arch/riscv/Makefile.inc @@ -101,6 +101,7 @@ romstage-y += stages.c romstage-y += misc.c romstage-$(ARCH_RISCV_PMP) += pmp.c +romstage-y += ramdetect.c romstage-y += smp.c romstage-y += \ $(top)/src/lib/memchr.c \ @@ -142,6 +143,7 @@ ramstage-y += virtual_memory.c ramstage-y += stages.c ramstage-y += misc.c +ramstage-y += ramdetect.c ramstage-y += smp.c ramstage-y += boot.c ramstage-y += tables.c diff --git a/src/arch/riscv/include/arch/exception.h b/src/arch/riscv/include/arch/exception.h index 6fbbdf0..cdca582 100644 --- a/src/arch/riscv/include/arch/exception.h +++ b/src/arch/riscv/include/arch/exception.h @@ -53,7 +53,7 @@ } void redirect_trap(void); -void trap_handler(trapframe *tf); +void default_trap_handler(trapframe *tf); void handle_supervisor_call(trapframe *tf); void handle_misaligned(trapframe *tf); diff --git a/src/arch/riscv/ramdetect.c b/src/arch/riscv/ramdetect.c new file mode 100644 index 0000000..47153ab --- /dev/null +++ b/src/arch/riscv/ramdetect.c @@ -0,0 +1,46 @@ +/* + * This file is part of the coreboot project. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include <arch/exception.h> +#include <types.h> +#include <console/console.h> +#include <device/mmio.h> +#include <ramdetect.h> +#include <arch/smp/spinlock.h> + +static enum { + ABORT_CHECKER_NOT_TRIGGERED, + ABORT_CHECKER_TRIGGERED, +} abort_state = ABORT_CHECKER_NOT_TRIGGERED; + +extern void(*trap_handler)(trapframe *tf); + +#define insn_size 4 +static void ramcheck_trap_handler(trapframe *tf) +{ + printk(BIOS_DEBUG, "TRAP 0x%lx!!!\n", tf->epc); + abort_state = ABORT_CHECKER_TRIGGERED; + + /* + * skip read instruction. + * currenctly hardcoded to 32bit instruction size + */ + write_csr(mepc, read_csr(mepc) + insn_size); +} + +int probe_mb(const uintptr_t dram_start, const uintptr_t size) +{ + uintptr_t addr = dram_start + (size * MiB) - sizeof(uint32_t); + void *ptr = (void *)addr; + + abort_state = ABORT_CHECKER_NOT_TRIGGERED; + trap_handler = ramcheck_trap_handler; + barrier(); + read32(ptr); + trap_handler = default_trap_handler; + barrier(); + return abort_state == ABORT_CHECKER_NOT_TRIGGERED; +} diff --git a/src/arch/riscv/trap_handler.c b/src/arch/riscv/trap_handler.c index 6b39fab..1d51268 100644 --- a/src/arch/riscv/trap_handler.c +++ b/src/arch/riscv/trap_handler.c @@ -118,7 +118,10 @@ break; } } -void trap_handler(trapframe *tf) + +void(*trap_handler)(trapframe *tf) = default_trap_handler; + +void default_trap_handler(trapframe *tf) { write_csr(mscratch, tf); if (tf->cause & 0x8000000000000000ULL) { diff --git a/src/arch/riscv/trap_util.S b/src/arch/riscv/trap_util.S index 67e917c..93f5afd 100644 --- a/src/arch/riscv/trap_util.S +++ b/src/arch/riscv/trap_util.S @@ -120,7 +120,8 @@ save_tf mv a0, sp - jal trap_handler + ld t0, trap_handler + jalr t0 restore_regs addi sp, sp, MENTRY_FRAME_SIZE diff --git a/src/lib/ramdetect.c b/src/lib/ramdetect.c index 2c83092..eaf6190 100644 --- a/src/lib/ramdetect.c +++ b/src/lib/ramdetect.c @@ -58,6 +58,8 @@ if (saved_result) return saved_result; + printk(BIOS_DEBUG, "RAMDETECT: Starting\n"); + /* Find the MSB + 1. */ size_t tmp = probe_size; do { -- To view, visit https://review.coreboot.org/c/coreboot/+/36486 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I25860f688c7546714f6fdbce8c8f96da6400813c Gerrit-Change-Number: 36486 Gerrit-PatchSet: 1 Gerrit-Owner: Philipp Hug <philipp(a)hug.cx> Gerrit-MessageType: newchange

5 10

Change in coreboot[master]: arch/x86: Add option to compress postcar stage
by Arthur Heymans (Code Review) 21 Oct '22

21 Oct '22

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36674 ) Change subject: arch/x86: Add option to compress postcar stage ...................................................................... arch/x86: Add option to compress postcar stage The LZ4 decompressor was already linked in romstage. Change-Id: I89fdc6066027447bf72968c66e6f5eb5fbb630c7 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/Kconfig M src/arch/x86/Makefile.inc 2 files changed, 19 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/74/36674/1 diff --git a/src/Kconfig b/src/Kconfig index 0d56291..17bf545 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -158,6 +158,16 @@ that decompression might slow down booting if the boot flash is connected through a slow link (i.e. SPI). +config COMPRESS_POSTCAR + bool "Compress postcar with LZ4" + depends on POSTCAR_STAGE + # Default value set at the end of the file + help + Compress postcar with LZ4 to save flash space and speed up boot, + since the time for reading the image from SPI (and in the vboot + case verifying it) is usually much greater than the time spent + decompressing. + config COMPRESS_PRERAM_STAGES bool "Compress romstage and verstage with LZ4" depends on !ARCH_X86 && (HAVE_ROMSTAGE || HAVE_VERSTAGE) @@ -1203,6 +1213,9 @@ config COMPRESS_RAMSTAGE default y if !UNCOMPRESSED_RAMSTAGE +config COMPRESS_POSTCAR + default y + config COMPRESS_PRERAM_STAGES depends on !ARCH_X86 default y diff --git a/src/arch/x86/Makefile.inc b/src/arch/x86/Makefile.inc index 447fd57..8c35176 100644 --- a/src/arch/x86/Makefile.inc +++ b/src/arch/x86/Makefile.inc @@ -278,11 +278,16 @@ $(objcbfs)/postcar.elf: $(objcbfs)/postcar.debug.rmod cp $< $@ +CBFS_POSTCAR_COMPRESS_FLAG := none +ifeq ($(CONFIG_COMPRESS_POSTCAR),y) +CBFS_POSTCAR_COMPRESS_FLAG := lz4 +endif + # Add postcar to CBFS cbfs-files-$(CONFIG_POSTCAR_STAGE) += $(CONFIG_CBFS_PREFIX)/postcar $(CONFIG_CBFS_PREFIX)/postcar-file := $(objcbfs)/postcar.elf $(CONFIG_CBFS_PREFIX)/postcar-type := stage -$(CONFIG_CBFS_PREFIX)/postcar-compression := none +$(CONFIG_CBFS_PREFIX)/postcar-compression := $(CBFS_POSTCAR_COMPRESS_FLAG) ############################################################################### # ramstage -- To view, visit https://review.coreboot.org/c/coreboot/+/36674 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I89fdc6066027447bf72968c66e6f5eb5fbb630c7 Gerrit-Change-Number: 36674 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

8 22

Change in coreboot[master]: [WIP]cpu/x86/cache: CLFLUSH programs to memory before running
by Arthur Heymans (Code Review) 21 Oct '22

21 Oct '22

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37196 ) Change subject: [WIP]cpu/x86/cache: CLFLUSH programs to memory before running ...................................................................... [WIP]cpu/x86/cache: CLFLUSH programs to memory before running When cbmem is initialized in romstage and postcar placed in the stage cache + cbmem where it is run, the assumption is made that this are all in UC memory such that calling invd in postcar is ok. For performance reasons (e.g. postcar decompression) it is desirable to cache cbmem and the stage cache during romstage. Another reason is that AGESA sets up MTRR during romstage to cache all dram, which is currently worked around by using additional MTRR to make that UC. TODO be nice to reviewers and spit some parts off. UNTESTED Change-Id: I7ff2a57aee620908b71829457ea0f5a0c410ec5b Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/arch/x86/postcar_loader.c M src/cpu/x86/cache/Makefile.inc M src/cpu/x86/cache/cache.c M src/include/cpu/x86/cache.h 4 files changed, 68 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/96/37196/1 diff --git a/src/arch/x86/postcar_loader.c b/src/arch/x86/postcar_loader.c index b53cbf8..53ab4f9 100644 --- a/src/arch/x86/postcar_loader.c +++ b/src/arch/x86/postcar_loader.c @@ -208,6 +208,21 @@ MTRR_TYPE_WRBACK); } +/* + * POSTCAR will call invd so don't make assumptions on cbmem + * and external stage cache being UC. + */ +static void postcar_flush_cache(void) +{ + uintptr_t stage_cache_base; + size_t stage_cache_size; + prog_segment_loaded((uintptr_t)cbmem_top(), cbmem_overhead_size(), SEG_FINAL); + if (CONFIG(TSEG_STAGE_CACHE)) { + stage_cache_external_region((void **)&stage_cache_base, &stage_cache_size); + prog_segment_loaded(stage_cache_base, stage_cache_size, SEG_FINAL); + } +} + void run_postcar_phase(struct postcar_frame *pcf) { struct prog prog = @@ -222,8 +237,10 @@ parameters between S3 resume and normal boot. On the platforms where the values are the same it's a nop. */ finalize_load(prog.arg, pcf->stack); - } else + } else { load_postcar_cbfs(&prog, pcf); + postcar_flush_cache(); + } /* As postcar exist, it's end of romstage here */ timestamp_add_now(TS_END_ROMSTAGE); diff --git a/src/cpu/x86/cache/Makefile.inc b/src/cpu/x86/cache/Makefile.inc index b33b9ee..759488e 100644 --- a/src/cpu/x86/cache/Makefile.inc +++ b/src/cpu/x86/cache/Makefile.inc @@ -1 +1,2 @@ +romstage-y += cache.c ramstage-y += cache.c diff --git a/src/cpu/x86/cache/cache.c b/src/cpu/x86/cache/cache.c index 2313c4d..ac2c45b 100644 --- a/src/cpu/x86/cache/cache.c +++ b/src/cpu/x86/cache/cache.c @@ -11,8 +11,11 @@ * GNU General Public License for more details. */ +#include <cbmem.h> +#include <program_loading.h> #include <console/console.h> #include <cpu/x86/cache.h> +#include <arch/cpu.h> void x86_enable_cache(void) { @@ -20,3 +23,47 @@ printk(BIOS_INFO, "Enabling cache\n"); enable_cache(); } + +int clflush_supported(void) +{ + return (cpuid_edx(1) >> 19) & 1; +} + +static void clflush_region(uintptr_t start, size_t size) +{ + uintptr_t addr; + size_t cl_size = (cpuid_ebx(1) >> 8) & 0xff; + if (!clflush_supported()) + return; + for (addr = (start / cl_size) * cl_size; addr < start + size; addr += cl_size) + clflush((void *)addr); +} + +static int dram_ready; + +/* + * For each segment of a program loaded this function is called + * to invalidate caches for the addresses of the loaded segment + */ +void arch_segment_loaded(uintptr_t start, size_t size, int flags) +{ + /* INVD is only called in postcar stage so we only need + to make sure that our things hit dram during romstage. */ + if (!ENV_ROMSTAGE) + return; + if (flags != SEG_FINAL) + return; + if (!dram_ready) + return; + + if (!clflush_supported()) + printk(BIOS_DEBUG, "Not flushing cache to ram, CLFLUSH not supported\n"); + clflush_region(start, size); +} + +static void set_dram_ready(int unused) +{ + dram_ready = 1; +} + +ROMSTAGE_CBMEM_INIT_HOOK(set_dram_ready); diff --git a/src/include/cpu/x86/cache.h b/src/include/cpu/x86/cache.h index 713ca32..2d2727f 100644 --- a/src/include/cpu/x86/cache.h +++ b/src/include/cpu/x86/cache.h @@ -55,6 +55,8 @@ asm volatile ("clflush (%0)"::"r" (addr)); } +int clflush_supported(void); + /* The following functions require the __always_inline due to AMD * function STOP_CAR_AND_CPU that disables cache as * RAM, the cache as RAM stack can no longer be used. Called -- To view, visit https://review.coreboot.org/c/coreboot/+/37196 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I7ff2a57aee620908b71829457ea0f5a0c410ec5b Gerrit-Change-Number: 37196 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

7 25

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit June 2020