coreboot-gerrit September 2019

coreboot-gerrit@coreboot.org

1 participants
1442 discussions

Change in coreboot[master]: Documentation: Add guidelines for new mainboard ports
by Patrick Rudolph (Code Review) 07 Aug '23

07 Aug '23

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/34632 ) Change subject: Documentation: Add guidelines for new mainboard ports ...................................................................... Documentation: Add guidelines for new mainboard ports This is WIP and partly copied from https://www.coreboot.org/Motherboard_Porting_Guide It also list what should be documented for new mainboard ports. Change-Id: I134dbf2341696ba0dd33c3d52bf787b8eaabbdab Signed-off-by: Patrick Rudolph <siro(a)das-labor.org> --- M Documentation/getting_started/index.md A Documentation/getting_started/new_mainboard_ports.md M Documentation/getting_started/writing_documentation.md 3 files changed, 95 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/32/34632/1 diff --git a/Documentation/getting_started/index.md b/Documentation/getting_started/index.md index 52d873e..7821ee1 100644 --- a/Documentation/getting_started/index.md +++ b/Documentation/getting_started/index.md @@ -7,3 +7,4 @@ * [Gerrit Guidelines](gerrit_guidelines.md) * [Documentation License](license.md) * [Writing Documentation](writing_documentation.md) +* [Adding new mainboards](new_mainboard_ports.md) diff --git a/Documentation/getting_started/new_mainboard_ports.md b/Documentation/getting_started/new_mainboard_ports.md new file mode 100644 index 0000000..cb7cd9b --- /dev/null +++ b/Documentation/getting_started/new_mainboard_ports.md @@ -0,0 +1,91 @@ +# Adding new mainboards + +Mainboard code is placed under `src/mainboards`. It glues the HW components +together by selecting appropiate northbridge, southbridge, on-board HW and +drivers. + +It provides the devicetree.cb, configures GPIOs, audio codecs, a static ACPI +board desciption and allows the romstage code to retrieve the SPD for +DRAM training. + +## Starting a new port from scratch + +1. Identify your platform + Try to find out as much as possible about the current hardware. + Dump information with existing tools: + * lspci + * lsusb + * superiotool + * inteltool + * ectool + * dmidecode + * acpidump + + Have a look at the mainboard schematics to see how those components are + connected. +2. Find a similar existing board + It a good idea to find a similar board and use it as reference. You should + then provide a proper GPIO configuration and devicetree.cb. +3. Find a similar SuperIo or BMC + To debug coreboot you should get the serial console working first. If your + board has a SuperIO or BMC try to find a compatible one. + Some boards have UART hardware on the SoC, makeing external components + obsolete. +4. Start with a minimal bootable configuration. That is: + * serial is working + * SPD reading/DRAM is working + * A payload that is able to boot an operating system +5. Be able to recover from a bad flash. You should use external flashing as + it's likely that you will brick your platform on the first attempts. + Make sure to backup the original firmware (if any). + +## Code submission + +Here's a checklist for new mainboard ports: + +1. Try to not duplicate code, use variants scheme instead. +2. Split changes logical into top level directories: + `src/mainboard` , `src/northbridge`, `src/ec`, ... +3. Provide good documentation, see point 4 +4. In the commit message describe as much as possible or point to the + documentation, satisfying the following questions: + * Where's the flash IC located? + * Can you flash incircuit? + * Are there pinheaders for flashing? + * Is the flash hardware write-protected? + * Which flash IC is usually equipped? + * If the board features an BMC, can it be used for developing and + debugging? + * What was tested and is working? + * What was tested and isn't working? + * What wasn't tested (due to lack of testing equipment)? + * Are blobs necessary? + * How can the board be debugged? + * Are there serial, EHCI debug, xHCI debug or BMC connections? + * Does it have a SuperIO? + + In addition please descibe: + * How to retrieve blobs, like dumping them from vendor firmware + + See [Writing Documentation] for more details. + +5. What you should **not** document: + * Steps or instructions how to flash the board + * Steps or instructions how to use a specific application for flashing + * Please do not provide pictures of the whole board or it's backplate + connectors +6. Recommand a flashing method as descibed in [Flashing tutorial] +7. If you are working at/for a hardware vendor, please provide free board + schematics as well. +8. Provide a picture of the flash IC or flash connector. + * The picture should be less than 800pc in width and compressed with + 70% compression to reduce size. + * You must own the Copyright + * Try to cut of uninteresting parts of the image, like tables, cables, ... + +Once done submit your board to Gerrit. Please follow the [Gerrit Guidelines] as +well. + +[Writing Documentation]: writing_documentation.md +[Flashing tutorial]: ../flash_tutorial/index.md +[Gerrit Guidelines]: gerrit_guidelines.md diff --git a/Documentation/getting_started/writing_documentation.md b/Documentation/getting_started/writing_documentation.md index fb942a4..0b820fc 100644 --- a/Documentation/getting_started/writing_documentation.md +++ b/Documentation/getting_started/writing_documentation.md @@ -49,6 +49,8 @@ the current theme doesn't allow bigger images. 12. Shouldn't cover implementation details; for details, the code is the reference. +13. New mainboard ports should also add documentation. See + [Adding new mainboards] for more details. ## Referencing markdown documents @@ -122,3 +124,4 @@ [Markdown Guide]: https://www.markdownguide.org/ [Gerrit Guidelines]: gerrit_guidelines.md [review.coreboot.org]: https://review.coreboot.org +[Adding new mainboards]: new_mainboard_ports.md -- To view, visit https://review.coreboot.org/c/coreboot/+/34632 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I134dbf2341696ba0dd33c3d52bf787b8eaabbdab Gerrit-Change-Number: 34632 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

9 19

Change in ...coreboot[master]: WIP: google/krane: Add Panel TV101WUM-NL6 support.
by Kaka Ni (Code Review) 07 Aug '23

07 Aug '23

Kaka Ni has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32512 Change subject: WIP: google/krane: Add Panel TV101WUM-NL6 support. ...................................................................... WIP: google/krane: Add Panel TV101WUM-NL6 support. Add panel TV101WUM-NL6 for Krane. The edid info and init command are from: https://crrev.com/c/1565758 Change-Id: Ieb6b2be6c2c571c09c781f4370d8c52612421823 Signed-off-by: Kaka Ni <nigang(a)huaqin.corp-partner.google.com> --- M src/mainboard/google/kukui/Makefile.inc M src/mainboard/google/kukui/display.c M src/mainboard/google/kukui/display.h A src/mainboard/google/kukui/panel_krane.c 4 files changed, 423 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/12/32512/1 diff --git a/src/mainboard/google/kukui/Makefile.inc b/src/mainboard/google/kukui/Makefile.inc index ef52031..9576b7d 100644 --- a/src/mainboard/google/kukui/Makefile.inc +++ b/src/mainboard/google/kukui/Makefile.inc @@ -24,6 +24,7 @@ ramstage-y += chromeos.c ramstage-y += display.c ramstage-y += panel_kukui.c +ramstage-y += panel_krane.c ramstage-y += mainboard.c ramstage-y += memlayout.ld ramstage-y += reset.c diff --git a/src/mainboard/google/kukui/display.c b/src/mainboard/google/kukui/display.c index 5ec6ccd..b0a5026 100644 --- a/src/mainboard/google/kukui/display.c +++ b/src/mainboard/google/kukui/display.c @@ -97,6 +97,8 @@ { if (CONFIG(BOARD_GOOGLE_KUKUI)) return &kukui_display_intf; + else if (CONFIG(BOARD_GOOGLE_KRANE)) + return &krane_display_intf; else return NULL; } diff --git a/src/mainboard/google/kukui/display.h b/src/mainboard/google/kukui/display.h index 33cc997..52420db 100644 --- a/src/mainboard/google/kukui/display.h +++ b/src/mainboard/google/kukui/display.h @@ -33,9 +33,18 @@ PANEL_KUKUI_UNINITIALIZED }; +enum krane_panel_id { + PANEL_KRANE_FIRST = 0, + PANEL_KRANE_BOE_TV101WUM_NL6, + PANEL_KRANE_UNKNOWN, + PANEL_KRANE_COUNT, + PANEL_KRANE_UNINITIALIZED +}; + union panel_id { enum kukui_panel_id kukui_panel; + enum krane_panel_id krane_panel; int value; }; @@ -90,6 +99,7 @@ * Panel Interface for boards */ extern struct board_display_intf kukui_display_intf; +extern struct board_display_intf krane_display_intf; #endif diff --git a/src/mainboard/google/kukui/panel_krane.c b/src/mainboard/google/kukui/panel_krane.c new file mode 100644 index 0000000..5c338c8 --- /dev/null +++ b/src/mainboard/google/kukui/panel_krane.c @@ -0,0 +1,410 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2019 Huaqin Telecom Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <delay.h> +#include <device/device.h> +#include <edid.h> +#include <gpio.h> +#include <soc/auxadc.h> +#include <soc/ddp.h> +#include <soc/dsi.h> +#include <soc/gpio.h> +#include <boardid.h> + +#include "display.h" +#include "gpio.h" + +static struct edid krane_boe_tv101wum_nl6_edid = { + .panel_bits_per_color = 8, + .panel_bits_per_pixel = 24, + .mode = { + .name = "1200x1920@60Hz", + .pixel_clock = 159420, + .lvds_dual_channel = 0, + .refresh = 60, + .ha = 1200, .hbl = 164, .hso = 80, .hspw = 24, .hborder = 0, + .va = 1920, .vbl = 28, .vso = 10, .vspw = 4, .vborder = 0, + .phsync = '-', .pvsync = '-', + .x_mm = 135, .y_mm = 216, + }, +}; + +struct lcm_init_table boe_tv101wum_nl6_init_cmd[] = { + {INIT_DCS_CMD, 1, { 0x10 } }, + {DELAY_CMD, 34, {} }, + {INIT_DCS_CMD, 2, { 0xB0, 0x05 } }, + {INIT_DCS_CMD, 2, { 0xB1, 0xE5 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x52 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x88 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x03 } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x8B } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x1A } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x0F } }, + {INIT_DCS_CMD, 2, { 0xC2, 0x0C } }, + {INIT_DCS_CMD, 2, { 0xC3, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xC4, 0x0C } }, + {INIT_DCS_CMD, 2, { 0xC5, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x01 } }, + {INIT_DCS_CMD, 2, { 0xE0, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xE1, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xDC, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xDD, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xCD, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xC8, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xD2, 0x03 } }, + {INIT_DCS_CMD, 2, { 0xD3, 0x03 } }, + {INIT_DCS_CMD, 2, { 0xE6, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xE7, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xC4, 0x09 } }, + {INIT_DCS_CMD, 2, { 0xC5, 0x09 } }, + {INIT_DCS_CMD, 2, { 0xD8, 0x0A } }, + {INIT_DCS_CMD, 2, { 0xD9, 0x0A } }, + {INIT_DCS_CMD, 2, { 0xC2, 0x0B } }, + {INIT_DCS_CMD, 2, { 0xC3, 0x0B } }, + {INIT_DCS_CMD, 2, { 0xD6, 0x0C } }, + {INIT_DCS_CMD, 2, { 0xD7, 0x0C } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x05 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x05 } }, + {INIT_DCS_CMD, 2, { 0xD4, 0x06 } }, + {INIT_DCS_CMD, 2, { 0xD5, 0x06 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xDE, 0x08 } }, + {INIT_DCS_CMD, 2, { 0xDF, 0x08 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x0D } }, + {INIT_DCS_CMD, 2, { 0xC2, 0x17 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xC4, 0x31 } }, + {INIT_DCS_CMD, 2, { 0xC5, 0x1C } }, + {INIT_DCS_CMD, 2, { 0xC6, 0x2C } }, + {INIT_DCS_CMD, 2, { 0xC7, 0x33 } }, + {INIT_DCS_CMD, 2, { 0xC8, 0x31 } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xCD, 0x2E } }, + {INIT_DCS_CMD, 2, { 0xCE, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xCF, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xD0, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xD2, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xD3, 0x0D } }, + {INIT_DCS_CMD, 2, { 0xD4, 0x17 } }, + {INIT_DCS_CMD, 2, { 0xD5, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xD6, 0x31 } }, + {INIT_DCS_CMD, 2, { 0xD7, 0x3F } }, + {INIT_DCS_CMD, 2, { 0xD8, 0x3F } }, + {INIT_DCS_CMD, 2, { 0xD9, 0x3F } }, + {INIT_DCS_CMD, 2, { 0xDA, 0x3F } }, + {INIT_DCS_CMD, 2, { 0xDB, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xDC, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xDD, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xDE, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xDF, 0x2E } }, + {INIT_DCS_CMD, 2, { 0xE0, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xE1, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xE2, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x03 } }, + {INIT_DCS_CMD, 2, { 0xC8, 0x0B } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xE7, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xC5, 0x2A } }, + {INIT_DCS_CMD, 2, { 0xDE, 0x2A } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x43 } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xE4, 0xC0 } }, + {INIT_DCS_CMD, 2, { 0xE5, 0x0D } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x06 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0xA5 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0xA5 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0x0F } }, + {INIT_DCS_CMD, 2, { 0xD5, 0x32 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x0F } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x25 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4E } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x72 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x97 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xDC } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x22 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xA4 } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x2B } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xA9 } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x25 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x61 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x97 } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB2 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xCD } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xD9 } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE7 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF4 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x08 } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x05 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x11 } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x24 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4F } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x72 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x98 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xDC } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x23 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xA6 } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x2C } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x30 } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xAA } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x62 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x9B } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB5 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xCF } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xDB } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE8 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF5 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x09 } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x24 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x3B } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4F } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x73 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x99 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xE0 } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xAD } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x36 } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x3A } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xAE } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x2A } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x66 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x9E } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB8 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xD1 } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xDD } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE9 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF6 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x0A } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x0F } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x25 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4E } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x72 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x97 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xDC } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x22 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xA4 } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x2B } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xA9 } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x25 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x61 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x97 } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB2 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xCD } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xD9 } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE7 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF4 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x0B } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x05 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x11 } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x24 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4F } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x72 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x98 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xDC } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x23 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xA6 } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x2C } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x30 } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xAA } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x62 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x9B } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB5 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xCF } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xDB } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE8 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF5 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x0C } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x24 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x3B } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4F } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x73 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x99 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xE0 } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xAD } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x36 } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x3A } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xAE } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x2A } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x66 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x9E } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB8 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xD1 } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xDD } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE9 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF6 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x08 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x68 } }, + {DELAY_CMD, 10, {} }, + {INIT_DCS_CMD, 1, { 0x11 } }, + {DELAY_CMD, 120, {} }, + {INIT_DCS_CMD, 1, { 0x29 } }, + {DELAY_CMD, 20, {} }, + +}; + +struct panel_info krane_panel_info[] = { + PANEL(PANEL_KRANE_BOE_TV101WUM_NL6, + 74000, + krane_boe_tv101wum_nl6_edid, + boe_tv101wum_nl6_init_cmd), + {{PANEL_KRANE_UNKNOWN}, "PANEL_KRANE_UNKNOWN", + 0, NULL, NULL, 0}, +}; + + +static union panel_id krane_get_panel_id(struct board_display_intf *intf) +{ + + return (union panel_id)PANEL_KRANE_BOE_TV101WUM_NL6; +}; + +static bool krane_is_panel_id_valid(union panel_id id) +{ + if (id.value < PANEL_KRANE_UNKNOWN) + return true; + return false; +}; + +static int krane_backlight(struct board_display_intf *intf) +{ + configure_backlight(); + return 0; +}; + +static int krane_power(struct board_display_intf *intf) +{ + + if (board_id() < 2) { + /* board from p1 */ + gpio_output(GPIO(LCM_RST), 0); + udelay(100); + gpio_output(GPIO(LCM_RST), 1); + mdelay(20); + } else { + /* board from p2 */ + gpio_output(GPIO(LCM_RST), 0); + udelay(1500); + gpio_output(GPIO(SIM2_SRST), 1); + mdelay(5); + gpio_output(GPIO(PERIPHERAL_EN9), 1); + gpio_output(GPIO(MISC_BSI_CK_3), 1); + mdelay(100); + gpio_output(GPIO(LCM_RST), 1); + mdelay(10); + } + + return 0; + +}; + +struct board_display_intf krane_display_intf = { + .board = "krane", + .all_panel_info = krane_panel_info, + .all_panel_info_size = ARRAY_SIZE(krane_panel_info), + .cur_panel_info = NULL, + .get_panel_id = &krane_get_panel_id, + .is_panel_id_valid = &krane_is_panel_id_valid, + .backlight = &krane_backlight, + .power = &krane_power, +}; -- To view, visit https://review.coreboot.org/c/coreboot/+/32512 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ieb6b2be6c2c571c09c781f4370d8c52612421823 Gerrit-Change-Number: 32512 Gerrit-PatchSet: 1 Gerrit-Owner: Kaka Ni <nigang(a)huaqin.corp-partner.google.com> Gerrit-MessageType: newchange

6 15

Change in ...coreboot[master]: util/lint: check correctness of Change-Id line
by Idwer Vollering (Code Review) 07 Aug '23

07 Aug '23

Idwer Vollering has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33884 Change subject: util/lint: check correctness of Change-Id line ...................................................................... util/lint: check correctness of Change-Id line Change-Id: I67b9f134500bb596ae5790b68fe9f27e2fa2cfb4 Signed-off-by: Idwer Vollering <vidwer(a)gmail.com> --- A util/lint/lint-extended-024-change-id 1 file changed, 10 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/84/33884/1 diff --git a/util/lint/lint-extended-024-change-id b/util/lint/lint-extended-024-change-id new file mode 100755 index 0000000..1989ed4 --- /dev/null +++ b/util/lint/lint-extended-024-change-id @@ -0,0 +1,10 @@ +#!/bin/sh +if [ "$(git log -n 1 | grep -c '[[:space:]]\+Change-Id: ')" -lt 1 ] +then + echo "Change-Id line is missing"; +fi + +if [ "$(git log -n 1 | grep -c '[[:space:]]\+Change-Id: ')" -gt 1 ] +then + echo "Found more than one Change-Id line"; +fi -- To view, visit https://review.coreboot.org/c/coreboot/+/33884 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I67b9f134500bb596ae5790b68fe9f27e2fa2cfb4 Gerrit-Change-Number: 33884 Gerrit-PatchSet: 1 Gerrit-Owner: Idwer Vollering <vidwer(a)gmail.com> Gerrit-MessageType: newchange

7 18

Change in coreboot[master]: cpu/intel/speedstep: Add comment to clarify define
by Patrick Rudolph (Code Review) 07 Aug '23

07 Aug '23

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/34360 ) Change subject: cpu/intel/speedstep: Add comment to clarify define ...................................................................... cpu/intel/speedstep: Add comment to clarify define Add a comment to clarify that the define must match the define in southbridge headers. Change-Id: Ie0e97b170c81e3bca38975d6a3fe9a368c70e622 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/include/cpu/intel/speedstep.h 1 file changed, 1 insertion(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/60/34360/1 diff --git a/src/include/cpu/intel/speedstep.h b/src/include/cpu/intel/speedstep.h index 05d83ed..660e5ae 100644 --- a/src/include/cpu/intel/speedstep.h +++ b/src/include/cpu/intel/speedstep.h @@ -25,6 +25,7 @@ /* MWAIT coordination I/O base address. This must match * the \_PR_.CP00 PM base address. + * PMB0_BASE - 0x10 should match PMBASE for legacy C-state emulation. */ #define PMB0_BASE 0x510 -- To view, visit https://review.coreboot.org/c/coreboot/+/34360 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ie0e97b170c81e3bca38975d6a3fe9a368c70e622 Gerrit-Change-Number: 34360 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

5 4

Change in coreboot[master]: mb/supermicro: Add X10SLM+-LN4F as X10SLM variant
by Christoph Pomaska (Code Review) 07 Aug '23

07 Aug '23

Christoph Pomaska has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35163 ) Change subject: mb/supermicro: Add X10SLM+-LN4F as X10SLM variant ...................................................................... mb/supermicro: Add X10SLM+-LN4F as X10SLM variant This commit modifies the source tree of the X10SLM-F board to support building a slightly different variant of the board, the X10SLM-LN4F. Change-Id: I686d8d4e2ec5b4eb2db214b6e0827ac9c33829d1 Signed-off-by: Christoph Pomaska <c.pomaska(a)hosting.de> --- D src/mainboard/supermicro/x10slm-f/Kconfig.name D src/mainboard/supermicro/x10slm-f/board_info.txt R src/mainboard/supermicro/x10slm/Kconfig A src/mainboard/supermicro/x10slm/Kconfig.name R src/mainboard/supermicro/x10slm/Makefile.inc R src/mainboard/supermicro/x10slm/acpi/ec.asl R src/mainboard/supermicro/x10slm/acpi/platform.asl R src/mainboard/supermicro/x10slm/acpi/superio.asl R src/mainboard/supermicro/x10slm/acpi_tables.c A src/mainboard/supermicro/x10slm/board_info.txt R src/mainboard/supermicro/x10slm/bootblock.c R src/mainboard/supermicro/x10slm/cmos.default R src/mainboard/supermicro/x10slm/cmos.layout R src/mainboard/supermicro/x10slm/dsdt.asl R src/mainboard/supermicro/x10slm/gpio.c R src/mainboard/supermicro/x10slm/mainboard.c R src/mainboard/supermicro/x10slm/romstage.c R src/mainboard/supermicro/x10slm/variants/x10slm-f/devicetree.cb R src/mainboard/supermicro/x10slm/variants/x10slm-f/hda_verb.c A src/mainboard/supermicro/x10slm/variants/x10slm-ln4f/devicetree.cb C src/mainboard/supermicro/x10slm/variants/x10slm-ln4f/hda_verb.c 21 files changed, 238 insertions(+), 78 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/63/35163/1 diff --git a/src/mainboard/supermicro/x10slm-f/Kconfig.name b/src/mainboard/supermicro/x10slm-f/Kconfig.name deleted file mode 100644 index a1965a3..0000000 --- a/src/mainboard/supermicro/x10slm-f/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_SUPERMICRO_X10SLM_PLUS_F - bool "X10SLM+-F" diff --git a/src/mainboard/supermicro/x10slm-f/board_info.txt b/src/mainboard/supermicro/x10slm-f/board_info.txt deleted file mode 100644 index e558429..0000000 --- a/src/mainboard/supermicro/x10slm-f/board_info.txt +++ /dev/null @@ -1,7 +0,0 @@ -Category: server -Board URL: https://www.supermicro.com/products/motherboard/xeon/c220/x10slm_-f.cfm -ROM package: SOIC-8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: y -Release year: 2013 diff --git a/src/mainboard/supermicro/x10slm-f/Kconfig b/src/mainboard/supermicro/x10slm/Kconfig similarity index 60% rename from src/mainboard/supermicro/x10slm-f/Kconfig rename to src/mainboard/supermicro/x10slm/Kconfig index 3945c09..99a3099 100644 --- a/src/mainboard/supermicro/x10slm-f/Kconfig +++ b/src/mainboard/supermicro/x10slm/Kconfig @@ -2,6 +2,7 @@ ## This file is part of the coreboot project. ## ## Copyright (C) 2018 Tristan Corrick <tristan(a)corrick.kiwi> +## Copyright (C) 2019 Hosting.de GmbH <c.pomaska(a)hosting.de> ## ## This program is free software: you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by @@ -14,13 +15,12 @@ ## GNU General Public License for more details. ## -if BOARD_SUPERMICRO_X10SLM_PLUS_F +if BOARD_SUPERMICRO_X10SLM_PLUS_F || BOARD_SUPERMICRO_X10SLM_PLUS_LN4F config BOARD_SPECIFIC_OPTIONS def_bool y select BOARD_ROMSIZE_KB_16384 select CPU_INTEL_HASWELL - select DRIVERS_ASPEED_AST2050 # Supports AST2400 too. select HAVE_ACPI_RESUME select HAVE_ACPI_TABLES select HAVE_OPTION_TABLE @@ -30,19 +30,33 @@ select SOUTHBRIDGE_INTEL_LYNXPOINT select SUPERIO_NUVOTON_NCT6776 select SUPERIO_NUVOTON_NCT6776_COM_A + select DRIVERS_ASPEED_AST2050 + select SUPERIO_ASPEED_AST2400 # The board's BMC + select MAINBOARD_HAS_LPC_TPM + select MAINBOARD_HAS_TPM2 + +config MAINBOARD_DIR + string + default "supermicro/x10slm" + +config VARIANT_DIR + string + default "x10slm-f" if BOARD_SUPERMICRO_X10SLM_PLUS_F + default "x10slm-ln4f" if BOARD_SUPERMICRO_X10SLM_PLUS_LN4F + +config MAINBOARD_PART_NUMBER + string + default "X10SLM+-F" if BOARD_SUPERMICRO_X10SLM_PLUS_F + default "X10SLM+-LN4F" if BOARD_SUPERMICRO_X10SLM_PLUS_LN4F + +config DEVICETREE + default "variants/x10slm-f/devicetree.cb" if BOARD_SUPERMICRO_X10SLM_PLUS_F + default "variants/x10slm-ln4f/devicetree.cb" if BOARD_SUPERMICRO_X10SLM_PLUS_LN4F config CBFS_SIZE hex default 0xb00000 -config MAINBOARD_DIR - string - default "supermicro/x10slm-f" - -config MAINBOARD_PART_NUMBER - string - default "X10SLM+-F" - config MAX_CPUS int default 8 diff --git a/src/mainboard/supermicro/x10slm/Kconfig.name b/src/mainboard/supermicro/x10slm/Kconfig.name new file mode 100644 index 0000000..6f95d97 --- /dev/null +++ b/src/mainboard/supermicro/x10slm/Kconfig.name @@ -0,0 +1,4 @@ +config BOARD_SUPERMICRO_X10SLM_PLUS_F + bool "X10SLM+-F" +config BOARD_SUPERMICRO_X10SLM_PLUS_LN4F + bool "X10SLM+-LN4F" diff --git a/src/mainboard/supermicro/x10slm-f/Makefile.inc b/src/mainboard/supermicro/x10slm/Makefile.inc similarity index 100% rename from src/mainboard/supermicro/x10slm-f/Makefile.inc rename to src/mainboard/supermicro/x10slm/Makefile.inc diff --git a/src/mainboard/supermicro/x10slm-f/acpi/ec.asl b/src/mainboard/supermicro/x10slm/acpi/ec.asl similarity index 100% rename from src/mainboard/supermicro/x10slm-f/acpi/ec.asl rename to src/mainboard/supermicro/x10slm/acpi/ec.asl diff --git a/src/mainboard/supermicro/x10slm-f/acpi/platform.asl b/src/mainboard/supermicro/x10slm/acpi/platform.asl similarity index 100% rename from src/mainboard/supermicro/x10slm-f/acpi/platform.asl rename to src/mainboard/supermicro/x10slm/acpi/platform.asl diff --git a/src/mainboard/supermicro/x10slm-f/acpi/superio.asl b/src/mainboard/supermicro/x10slm/acpi/superio.asl similarity index 100% rename from src/mainboard/supermicro/x10slm-f/acpi/superio.asl rename to src/mainboard/supermicro/x10slm/acpi/superio.asl diff --git a/src/mainboard/supermicro/x10slm-f/acpi_tables.c b/src/mainboard/supermicro/x10slm/acpi_tables.c similarity index 100% rename from src/mainboard/supermicro/x10slm-f/acpi_tables.c rename to src/mainboard/supermicro/x10slm/acpi_tables.c diff --git a/src/mainboard/supermicro/x10slm/board_info.txt b/src/mainboard/supermicro/x10slm/board_info.txt new file mode 100644 index 0000000..741cfa3 --- /dev/null +++ b/src/mainboard/supermicro/x10slm/board_info.txt @@ -0,0 +1,9 @@ +Category: server +Board URLs: +X10SLM-F: https://www.supermicro.com/products/motherboard/xeon/c220/x10slm_-f.cfm +X10SLM-LN4F: https://www.supermicro.com/en/products/motherboard/X10SLM+-LN4F +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y +Release year: 2013 diff --git a/src/mainboard/supermicro/x10slm-f/bootblock.c b/src/mainboard/supermicro/x10slm/bootblock.c similarity index 100% rename from src/mainboard/supermicro/x10slm-f/bootblock.c rename to src/mainboard/supermicro/x10slm/bootblock.c diff --git a/src/mainboard/supermicro/x10slm-f/cmos.default b/src/mainboard/supermicro/x10slm/cmos.default similarity index 100% rename from src/mainboard/supermicro/x10slm-f/cmos.default rename to src/mainboard/supermicro/x10slm/cmos.default diff --git a/src/mainboard/supermicro/x10slm-f/cmos.layout b/src/mainboard/supermicro/x10slm/cmos.layout similarity index 100% rename from src/mainboard/supermicro/x10slm-f/cmos.layout rename to src/mainboard/supermicro/x10slm/cmos.layout diff --git a/src/mainboard/supermicro/x10slm-f/dsdt.asl b/src/mainboard/supermicro/x10slm/dsdt.asl similarity index 100% rename from src/mainboard/supermicro/x10slm-f/dsdt.asl rename to src/mainboard/supermicro/x10slm/dsdt.asl diff --git a/src/mainboard/supermicro/x10slm-f/gpio.c b/src/mainboard/supermicro/x10slm/gpio.c similarity index 86% rename from src/mainboard/supermicro/x10slm-f/gpio.c rename to src/mainboard/supermicro/x10slm/gpio.c index a1668f1..0ecdaca 100644 --- a/src/mainboard/supermicro/x10slm-f/gpio.c +++ b/src/mainboard/supermicro/x10slm/gpio.c @@ -87,16 +87,14 @@ .gpio28 = GPIO_LEVEL_HIGH, }; -static const struct pch_gpio_set1 pch_gpio_set1_reset = { -}; +static const struct pch_gpio_set1 pch_gpio_set1_reset = {}; static const struct pch_gpio_set1 pch_gpio_set1_invert = { .gpio3 = GPIO_INVERT, .gpio14 = GPIO_INVERT, }; -static const struct pch_gpio_set1 pch_gpio_set1_blink = { -}; +static const struct pch_gpio_set1 pch_gpio_set1_blink = {}; static const struct pch_gpio_set2 pch_gpio_set2_mode = { .gpio32 = GPIO_MODE_GPIO, @@ -156,8 +154,7 @@ .gpio54 = GPIO_LEVEL_HIGH, }; -static const struct pch_gpio_set2 pch_gpio_set2_reset = { -}; +static const struct pch_gpio_set2 pch_gpio_set2_reset = {}; static const struct pch_gpio_set3 pch_gpio_set3_mode = { .gpio64 = GPIO_MODE_GPIO, @@ -188,28 +185,30 @@ .gpio73 = GPIO_LEVEL_LOW, }; -static const struct pch_gpio_set3 pch_gpio_set3_reset = { -}; +static const struct pch_gpio_set3 pch_gpio_set3_reset = {}; const struct pch_gpio_map mainboard_gpio_map = { - .set1 = { - .mode = &pch_gpio_set1_mode, - .direction = &pch_gpio_set1_direction, - .level = &pch_gpio_set1_level, - .blink = &pch_gpio_set1_blink, - .invert = &pch_gpio_set1_invert, - .reset = &pch_gpio_set1_reset, - }, - .set2 = { - .mode = &pch_gpio_set2_mode, - .direction = &pch_gpio_set2_direction, - .level = &pch_gpio_set2_level, - .reset = &pch_gpio_set2_reset, - }, - .set3 = { - .mode = &pch_gpio_set3_mode, - .direction = &pch_gpio_set3_direction, - .level = &pch_gpio_set3_level, - .reset = &pch_gpio_set3_reset, - }, + .set1 = + { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = + { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = + { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, }; diff --git a/src/mainboard/supermicro/x10slm-f/mainboard.c b/src/mainboard/supermicro/x10slm/mainboard.c similarity index 96% rename from src/mainboard/supermicro/x10slm-f/mainboard.c rename to src/mainboard/supermicro/x10slm/mainboard.c index 4bd5d15..57b5cec 100644 --- a/src/mainboard/supermicro/x10slm-f/mainboard.c +++ b/src/mainboard/supermicro/x10slm/mainboard.c @@ -53,6 +53,5 @@ } struct chip_operations mainboard_ops = { - CHIP_NAME("X10SLM+-F") - .enable_dev = mainboard_enable, + CHIP_NAME("X10SLM+-F").enable_dev = mainboard_enable, }; diff --git a/src/mainboard/supermicro/x10slm-f/romstage.c b/src/mainboard/supermicro/x10slm/romstage.c similarity index 70% rename from src/mainboard/supermicro/x10slm-f/romstage.c rename to src/mainboard/supermicro/x10slm/romstage.c index 552ebd2..0ff9b69 100644 --- a/src/mainboard/supermicro/x10slm-f/romstage.c +++ b/src/mainboard/supermicro/x10slm/romstage.c @@ -16,7 +16,7 @@ */ #include <cpu/intel/haswell/haswell.h> -#include <arch/romstage.h> +#include <cpu/intel/romstage.h> #include <northbridge/intel/haswell/haswell.h> #include <northbridge/intel/haswell/pei_data.h> #include <southbridge/intel/common/gpio.h> @@ -38,7 +38,7 @@ RCBA_END_CONFIG, }; -void mainboard_romstage_entry(void) +void mainboard_romstage_entry(unsigned long bist) { struct pei_data pei_data = { .pei_version = PEI_VERSION, @@ -56,42 +56,45 @@ .temp_mmio_base = 0xfed08000, .system_type = 1, /* desktop/server */ .tseg_size = CONFIG_SMM_TSEG_SIZE, - .spd_addresses = { 0xa0, 0xa2, 0xa4, 0xa6 }, + .spd_addresses = {0xa0, 0xa2, 0xa4, 0xa6}, .ec_present = 0, .ddr_refresh_2x = 1, .max_ddr3_freq = 1600, - .usb2_ports = { - /* Length, Enable, OCn#, Location */ - { 0x0040, 1, 0, USB_PORT_INTERNAL }, - { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, - { 0x0110, 1, 1, USB_PORT_BACK_PANEL }, - { 0x0110, 1, 1, USB_PORT_BACK_PANEL }, - { 0x0110, 1, 2, USB_PORT_BACK_PANEL }, - { 0x0110, 1, 2, USB_PORT_BACK_PANEL }, - { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, - { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, - { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, - { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, - { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, - { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, - }, - .usb3_ports = { - /* Enable, OCn# */ - { 1, 1 }, - { 1, 1 }, - { 0, USB_OC_PIN_SKIP }, - { 0, USB_OC_PIN_SKIP }, - { 1, 3 }, - { 1, 3 }, - }, + .usb2_ports = + { + /* Length, Enable, OCn#, Location */ + {0x0040, 1, 0, USB_PORT_INTERNAL}, + {0x0040, 1, 0, USB_PORT_BACK_PANEL}, + {0x0110, 1, 1, USB_PORT_BACK_PANEL}, + {0x0110, 1, 1, USB_PORT_BACK_PANEL}, + {0x0110, 1, 2, USB_PORT_BACK_PANEL}, + {0x0110, 1, 2, USB_PORT_BACK_PANEL}, + {0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP}, + {0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP}, + {0x0040, 1, 4, USB_PORT_BACK_PANEL}, + {0x0040, 1, 4, USB_PORT_BACK_PANEL}, + {0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP}, + {0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP}, + {0x0040, 1, 6, USB_PORT_BACK_PANEL}, + {0x0040, 1, 6, USB_PORT_BACK_PANEL}, + }, + .usb3_ports = + { + /* Enable, OCn# */ + {1, 1}, + {1, 1}, + {0, USB_OC_PIN_SKIP}, + {0, USB_OC_PIN_SKIP}, + {1, 3}, + {1, 3}, + }, }; struct romstage_params romstage_params = { .pei_data = &pei_data, .gpio_map = &mainboard_gpio_map, .rcba_config = rcba_config, + .bist = bist, }; romstage_common(&romstage_params); diff --git a/src/mainboard/supermicro/x10slm-f/devicetree.cb b/src/mainboard/supermicro/x10slm/variants/x10slm-f/devicetree.cb similarity index 100% rename from src/mainboard/supermicro/x10slm-f/devicetree.cb rename to src/mainboard/supermicro/x10slm/variants/x10slm-f/devicetree.cb diff --git a/src/mainboard/supermicro/x10slm-f/hda_verb.c b/src/mainboard/supermicro/x10slm/variants/x10slm-f/hda_verb.c similarity index 100% rename from src/mainboard/supermicro/x10slm-f/hda_verb.c rename to src/mainboard/supermicro/x10slm/variants/x10slm-f/hda_verb.c diff --git a/src/mainboard/supermicro/x10slm/variants/x10slm-ln4f/devicetree.cb b/src/mainboard/supermicro/x10slm/variants/x10slm-ln4f/devicetree.cb new file mode 100644 index 0000000..5dce6b0 --- /dev/null +++ b/src/mainboard/supermicro/x10slm/variants/x10slm-ln4f/devicetree.cb @@ -0,0 +1,141 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2018 Tristan Corrick <tristan(a)corrick.kiwi> +## +## This program is free software: you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation, either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +chip northbridge/intel/haswell + + device cpu_cluster 0 on + chip cpu/intel/haswell + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + + device lapic 0 on end + device lapic 0xacac off end + end + end + + device domain 0 on + subsystemid 0x15d9 0x0803 inherit + + device pci 00.0 on end # Host bridge + device pci 01.0 on end # PEG 10 + device pci 01.1 on end # PEG 11 + device pci 02.0 off end # IGD + device pci 03.0 off end # Mini-HD audio + + chip southbridge/intel/lynxpoint + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8a" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x85" + + register "sata_ahci" = "1" + register "sata_port_map" = "0x3f" + + register "gen1_dec" = "0x00000295" # Super I/O HWM + + device pci 14.0 on end # xHCI controller + device pci 16.0 on end # Management Engine interface 1 + device pci 16.1 on end # Management Engine interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 off end # Intel Gigabit Ethernet + device pci 1a.0 on end # EHCI controller 2 + device pci 1b.0 off end # HD audio controller + device pci 1c.0 on # PCIe root port 1 + device pci 00.0 on # ASPEED PCI-to-PCI bridge + device pci 00.0 on end # VGA controller + end + end + device pci 1c.1 off end # PCIe root port 2 + device pci 1c.2 on # PCIe root port 3 + device pci 00.0 on # Intel I210 Gigabit Ethernet + subsystemid 0x15d9 0x1533 + end + end + device pci 1c.3 on # PCIe root port 4 + device pci 00.0 on # Intel I210 Gigabit Ethernet + subsystemid 0x15d9 0x1533 + end + end + device pci 1c.4 on end # PCIe root port 5 + device pci 1c.5 off end # PCIe root port 6 + device pci 1c.6 on # PCIe root port 7 + device pci 00.0 on # Intel I210 Gigabit Ethernet + subsystemid 0x15d9 0x1533 + end + end + device pci 1c.7 on # PCIe root port 8 + device pci 00.0 on # Intel I210 Gigabit Ethernet + subsystemid 0x15d9 0x1533 + end + end + device pci 1d.0 on end # EHCI controller 1 + device pci 1f.0 on # LPC bridge + chip superio/nuvoton/nct6776 + device pnp 2e.0 off end # Floppy + device pnp 2e.1 off end # Parallel + device pnp 2e.2 on # UART A + io 0x60 = 0x03f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # UART B + io 0x60 = 0x02f8 + irq 0x70 = 3 + end + device pnp 2e.5 off end # PS/2 KBC + device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # GPIO8 + device pnp 2e.107 off end # GPIO9 + device pnp 2e.8 off end # WDT + device pnp 2e.108 off end # GPIO0 + device pnp 2e.208 off end # GPIOA + device pnp 2e.308 off end # GPIO base + device pnp 2e.109 off end # GPIO1 + device pnp 2e.209 off end # GPIO2 + device pnp 2e.309 off end # GPIO3 + device pnp 2e.409 off end # GPIO4 + device pnp 2e.509 off end # GPIO5 + device pnp 2e.609 off end # GPIO6 + device pnp 2e.709 off end # GPIO7 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HWM, LED + io 0x60 = 0x0290 + io 0x62 = 0 + irq 0x70 = 0 + end + device pnp 2e.d off end # VID + device pnp 2e.e off end # CIR wake-up + device pnp 2e.f off end # GPIO PP/OD + device pnp 2e.14 off end # SVID + device pnp 2e.16 off end # Deep sleep + device pnp 2e.17 off end # GPIOA + end + end + device pci 1f.2 on end # SATA controller 1 + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # SATA controller 2 + device pci 1f.6 on end # PCH thermal sensor + end + end +end diff --git a/src/mainboard/supermicro/x10slm-f/hda_verb.c b/src/mainboard/supermicro/x10slm/variants/x10slm-ln4f/hda_verb.c similarity index 100% copy from src/mainboard/supermicro/x10slm-f/hda_verb.c copy to src/mainboard/supermicro/x10slm/variants/x10slm-ln4f/hda_verb.c -- To view, visit https://review.coreboot.org/c/coreboot/+/35163 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I686d8d4e2ec5b4eb2db214b6e0827ac9c33829d1 Gerrit-Change-Number: 35163 Gerrit-PatchSet: 1 Gerrit-Owner: Christoph Pomaska <github(a)aufmachen.jetzt> Gerrit-MessageType: newchange

6 15

Change in ...coreboot[master]: security/vboot: Add fmap measurements
by Philipp Deppenwiese (Code Review) 07 Aug '23

07 Aug '23

Philipp Deppenwiese has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31597 Change subject: security/vboot: Add fmap measurements ...................................................................... security/vboot: Add fmap measurements * Hook into fmap location * Add static measurements for IFD to the CRTM Change-Id: If7e4972805fbc8d19ab55d1f5e506836791c7bf0 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki(a)gmail.com> --- M src/lib/fmap.c M src/security/vboot/vboot_crtm.c M src/security/vboot/vboot_crtm.h 3 files changed, 76 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/97/31597/1 diff --git a/src/lib/fmap.c b/src/lib/fmap.c index 9602134..ae0aaf8 100644 --- a/src/lib/fmap.c +++ b/src/lib/fmap.c @@ -20,6 +20,7 @@ #include <commonlib/fmap_serialized.h> #include <stddef.h> #include <string.h> +#include <security/vboot/vboot_crtm.h> #include "fmap_config.h" @@ -77,7 +78,12 @@ if (fmap_locate_area(name, &ar)) return -1; - return boot_device_ro_subregion(&ar, area); + int ret = boot_device_ro_subregion(&ar, area); + if (!ret) + if (vboot_measure_fmap_hook(area, name)) + return -1; + + return ret; } int fmap_locate_area_as_rdev_rw(const char *name, struct region_device *area) @@ -87,7 +93,12 @@ if (fmap_locate_area(name, &ar)) return -1; - return boot_device_rw_subregion(&ar, area); + int ret = boot_device_rw_subregion(&ar, area); + if (!ret) + if (vboot_measure_fmap_hook(area, name)) + return -1; + + return ret; } int fmap_locate_area(const char *name, struct region *ar) diff --git a/src/security/vboot/vboot_crtm.c b/src/security/vboot/vboot_crtm.c index 1914f20..a474fd0 100644 --- a/src/security/vboot/vboot_crtm.c +++ b/src/security/vboot/vboot_crtm.c @@ -18,6 +18,16 @@ #include <security/vboot/vboot_crtm.h> #include <security/vboot/misc.h> +const static char *fmap_runtime_data[] = { + "UNIFIED_MRC_CACHE", + "RW_MRC_CACHE", + "RW_ELOG", + "RW_VPD", + "RW_NVRAM", + "RECOVERY_MRC_CACHE", + "RW_VAR_MRC_CACHE", + "SMMSTORE"}; + uint32_t vboot_init_crtm(void) { struct prog bootblock = PROG_INIT(PROG_BOOTBLOCK, "bootblock"); @@ -88,6 +98,36 @@ } } + /* IFD measurements */ + struct region_device fmap; + if (fmap_locate_area_as_rdev("RO_VPD", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_CRTM_PCR, "Read-only VPD") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("GBB", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_CRTM_PCR, "Google Binary Blob") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("SI_DESC", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_CRTM_PCR, "Intel Flash Descriptor") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("SI_ME", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_RUNTIME_DATA_PCR, "Intel ME") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("SI_EC", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_RUNTIME_DATA_PCR, "EC firmware") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("SI_GBE", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_CRTM_PCR, "Intel GbE") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("SI_PDR", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_RUNTIME_DATA_PCR, "Platform Data") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + return VB2_SUCCESS; } @@ -142,3 +182,18 @@ return tpm_measure_region(&rdev, pcr_index, name); } + +uint32_t vboot_measure_fmap_hook(struct region_device *rdev, const char *name) +{ + int i; + + if (!vb2_logic_executed()) + return 0; + + for (i = 0; i < sizeof(fmap_runtime_data) / sizeof(fmap_runtime_data[0]); i++) { + if (!strncmp(fmap_runtime_data[i], name, sizeof(fmap_runtime_data[i]))) + return tpm_measure_region(rdev, TPM_RUNTIME_DATA_PCR, name); + } + + return 0; +} diff --git a/src/security/vboot/vboot_crtm.h b/src/security/vboot/vboot_crtm.h index d28e96e..259e486 100644 --- a/src/security/vboot/vboot_crtm.h +++ b/src/security/vboot/vboot_crtm.h @@ -54,8 +54,16 @@ */ uint32_t vboot_measure_cbfs_hook(struct cbfsf *fh, const char *name); +/* + * Measures fmap data via hook (fmap) + * rdev is the region device handle to measure + * return 0 if successful, else an error + */ +uint32_t vboot_measure_fmap_hook(struct region_device *rdev, const char *name); + #else #define vboot_measure_cbfs_hook(fh, name) 0 +#define vboot_measure_fmap_hook(rdev, name) 0 #endif #endif /* __VBOOT_VBOOT_CRTM_H__ */ -- To view, visit https://review.coreboot.org/c/coreboot/+/31597 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: If7e4972805fbc8d19ab55d1f5e506836791c7bf0 Gerrit-Change-Number: 31597 Gerrit-PatchSet: 1 Gerrit-Owner: Philipp Deppenwiese <zaolin.daisuki(a)gmail.com> Gerrit-MessageType: newchange

8 66

Change in coreboot[master]: soc/intel/common: Make use of clflush in common platform_segment_loaded
by Subrata Banik (Code Review) 07 Aug '23

07 Aug '23

Subrata Banik has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/34992 ) Change subject: soc/intel/common: Make use of clflush in common platform_segment_loaded ...................................................................... soc/intel/common: Make use of clflush in common platform_segment_loaded This patch clear cache lines based on platform_segment_loaded() supplied start and size values before loading the targeted stage. This changes is required to fix hang issues appeared due to marking DRAM ranges as WB (CONFIG_MARK_DRAM_CACHE_WB) to speed up next stage loading/ decompression/execution time. Idea is to run clflush on those ranges just before tearing down the CAR (running invd instruction) and after that postcar frame will set up new MTRR ranges. Change-Id: I591f21cb4199477af271f0dd6c073e1c11831bfd Signed-off-by: Subrata Banik <subrata.banik(a)intel.com> --- M src/soc/intel/common/block/cpu/Kconfig M src/soc/intel/common/block/cpu/Makefile.inc A src/soc/intel/common/block/cpu/car/car.c 3 files changed, 71 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/92/34992/1 diff --git a/src/soc/intel/common/block/cpu/Kconfig b/src/soc/intel/common/block/cpu/Kconfig index 8cc572d..0d1506b 100644 --- a/src/soc/intel/common/block/cpu/Kconfig +++ b/src/soc/intel/common/block/cpu/Kconfig @@ -66,3 +66,15 @@ help This option allows FSP to make use of MP services PPI published by coreboot to perform multiprocessor initialization. + +config MARK_DRAM_CACHE_WB + bool + default n + help + This option allows you to select how DRAM intermediate cache is set up. + Till discovering DRAM ranges, system will make use of CAR and CAR tear + down will handle by postcar/ramstage, that means entire postcar/ramstage + stage will execute from UC range. Intention here is to optimize the boot + flow hence enabling the caching for applicable DRAM ranges before CAR + tear down and setting up new DRAM based MTRR range. MTRR type WB + provides best optimization. diff --git a/src/soc/intel/common/block/cpu/Makefile.inc b/src/soc/intel/common/block/cpu/Makefile.inc index a6c4f37..63a2ac9 100644 --- a/src/soc/intel/common/block/cpu/Makefile.inc +++ b/src/soc/intel/common/block/cpu/Makefile.inc @@ -5,6 +5,7 @@ romstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_CAR) += car/exit_car.S romstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_CPU) += cpulib.c +romstage-$(CONFIG_MARK_DRAM_CACHE_WB) += car.c postcar-$(CONFIG_SOC_INTEL_COMMON_BLOCK_CAR) += car/exit_car.S postcar-$(CONFIG_FSP_CAR) += car/exit_car_fsp.S diff --git a/src/soc/intel/common/block/cpu/car/car.c b/src/soc/intel/common/block/cpu/car/car.c new file mode 100644 index 0000000..82d8e9a --- /dev/null +++ b/src/soc/intel/common/block/cpu/car/car.c @@ -0,0 +1,58 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <assert.h> +#include <cbmem.h> +#include <cpu/x86/cache.h> +#include <program_loading.h> + +static inline int is_usable_dram_addr(uintptr_t addr) +{ + return (addr < (uintptr_t) cbmem_top()); +} + +/* + * CLFLUSH the impacted WB'ed cache lines before loading postcar/ramstage + * in order to avoid getting stuck while tearing down (invd) the CAR. + */ +static void flush_cache(uintptr_t start, size_t size) +{ + uintptr_t end; + uintptr_t addr; + + end = start + (ALIGN_DOWN(size + 4096, 4096)); + for (addr = start; addr < end; addr += 64) + clflush((void *)addr); +} + +void platform_segment_loaded(uintptr_t start, size_t size, int flags) +{ + /* Bail out if this is not the final segment. */ + if (!(flags & SEG_FINAL)) + return; + + char start_dram_check = is_usable_dram_addr(start); + char end_dram_check = is_usable_dram_addr(start + size - 1); + + /* + * Bail out if loaded program segment does not lie in + * usable DRAM region. + */ + if (!start_dram_check && !end_dram_check) + return; + + flush_cache(start, size); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/34992 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I591f21cb4199477af271f0dd6c073e1c11831bfd Gerrit-Change-Number: 34992 Gerrit-PatchSet: 1 Gerrit-Owner: Subrata Banik <subrata.banik(a)intel.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Subrata Banik <subrata.banik(a)intel.com> Gerrit-MessageType: newchange

3 5

Change in coreboot[master]: arch/x86: Move generic functions from postcar_loader.c to stage_loader.c
by Subrata Banik (Code Review) 07 Aug '23

07 Aug '23

Subrata Banik has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/34751 ) Change subject: arch/x86: Move generic functions from postcar_loader.c to stage_loader.c ...................................................................... arch/x86: Move generic functions from postcar_loader.c to stage_loader.c This patch moves few generic functions (finalize_load and stack_push) from postcar_loader.c to stage_loader.c file so that other callers can also use these functions. Change-Id: I4d2200d95e68c0eb01681b8f9b71b3d30d122c43 Signed-off-by: Subrata Banik <subrata.banik(a)intel.com> --- M src/arch/x86/Makefile.inc A src/arch/x86/include/arch/stage_loader.h M src/arch/x86/postcar_loader.c A src/arch/x86/stage_loader.c 4 files changed, 62 insertions(+), 21 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/51/34751/1 diff --git a/src/arch/x86/Makefile.inc b/src/arch/x86/Makefile.inc index 32e0173..2fad75e 100644 --- a/src/arch/x86/Makefile.inc +++ b/src/arch/x86/Makefile.inc @@ -239,6 +239,7 @@ romstage-y += memset.c romstage-$(CONFIG_X86_TOP4G_BOOTMEDIA_MAP) += mmap_boot.c romstage-y += postcar_loader.c +romstage-y += stage_loader.c romstage-$(CONFIG_COLLECT_TIMESTAMPS_TSC) += timestamp.c romstage-$(CONFIG_ARCH_ROMSTAGE_X86_32) += walkcbfs.S diff --git a/src/arch/x86/include/arch/stage_loader.h b/src/arch/x86/include/arch/stage_loader.h new file mode 100644 index 0000000..23ac6e9 --- /dev/null +++ b/src/arch/x86/include/arch/stage_loader.h @@ -0,0 +1,32 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef STAGE_LOADER_H +#define STAGE_LOADER_H + +#include <arch/cpu.h> + +static inline void stack_push(struct postcar_frame *pcf, uint32_t val) +{ + uint32_t *ptr; + + pcf->stack -= sizeof(val); + ptr = (void *)pcf->stack; + *ptr = val; +} + +void finalize_load(uintptr_t *stack_top_ptr, uintptr_t stack_top); + +#endif /* STAGE_LOADER_H */ diff --git a/src/arch/x86/postcar_loader.c b/src/arch/x86/postcar_loader.c index 35e139f..3f42298 100644 --- a/src/arch/x86/postcar_loader.c +++ b/src/arch/x86/postcar_loader.c @@ -13,7 +13,7 @@ * GNU General Public License for more details. */ -#include <arch/cpu.h> +#include <arch/stage_loader.h> #include <cbmem.h> #include <console/console.h> #include <cpu/cpu.h> @@ -25,15 +25,6 @@ #include <stage_cache.h> #include <timestamp.h> -static inline void stack_push(struct postcar_frame *pcf, uint32_t val) -{ - uint32_t *ptr; - - pcf->stack -= sizeof(val); - ptr = (void *)pcf->stack; - *ptr = val; -} - static void postcar_frame_prepare(struct postcar_frame *pcf) { msr_t msr; @@ -131,17 +122,6 @@ return (void *) pcf->stack; } -static void finalize_load(uintptr_t *stack_top_ptr, uintptr_t stack_top) -{ - *stack_top_ptr = stack_top; - /* - * Signal to rest of system that another update was made to the - * postcar program prior to running it. - */ - prog_segment_loaded((uintptr_t)stack_top_ptr, sizeof(uintptr_t), - SEG_FINAL); -} - static void load_postcar_cbfs(struct prog *prog, struct postcar_frame *pcf) { struct rmod_stage_load rsl = { diff --git a/src/arch/x86/stage_loader.c b/src/arch/x86/stage_loader.c new file mode 100644 index 0000000..ca6a987 --- /dev/null +++ b/src/arch/x86/stage_loader.c @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/stage_loader.h> +#include <stage_cache.h> + +void finalize_load(uintptr_t *stack_top_ptr, uintptr_t stack_top) +{ + *stack_top_ptr = stack_top; + /* + * Signal to rest of system that another update was made to the + * postcar program prior to running it. + */ + prog_segment_loaded((uintptr_t)stack_top_ptr, sizeof(uintptr_t), + SEG_FINAL); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/34751 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4d2200d95e68c0eb01681b8f9b71b3d30d122c43 Gerrit-Change-Number: 34751 Gerrit-PatchSet: 1 Gerrit-Owner: Subrata Banik <subrata.banik(a)intel.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Subrata Banik <subrata.banik(a)intel.com> Gerrit-MessageType: newchange

3 21

Change in coreboot[4.8_branch]: cpu/allwinner: Prepend the BOOT0 header to the bootblock.bin
by Arthur Heymans (Code Review) 07 Aug '23

07 Aug '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35401 ) Change subject: cpu/allwinner: Prepend the BOOT0 header to the bootblock.bin ...................................................................... cpu/allwinner: Prepend the BOOT0 header to the bootblock.bin Instead of prepending the BOOT0 header to the full coreboot.rom to create a new file called BOOT0, prepend to the bootblock.bin that gets included in BOOTBLOCK FMAP region. Change-Id: I974a6aaa1a340c6b26f78b9d038be0f580331831 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/cpu/allwinner/a10/Makefile.inc 1 file changed, 3 insertions(+), 5 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/01/35401/1 diff --git a/src/cpu/allwinner/a10/Makefile.inc b/src/cpu/allwinner/a10/Makefile.inc index a6cd4b4..9f5f6ac 100644 --- a/src/cpu/allwinner/a10/Makefile.inc +++ b/src/cpu/allwinner/a10/Makefile.inc @@ -25,8 +25,6 @@ romstage-y += uart.c uart_console.c ramstage-y += uart.c uart_console.c -real-target: $(obj)/BOOT0 - get_bootblock_size= \ $(eval bb_s=$(shell $(CBFSTOOL) $(1) print | grep bootblocksize | \ sed 's/[^0-9 ]//g')) \ @@ -46,11 +44,11 @@ # under util/arm_boot_tools/mksunxiboot. The boot ROM will load at most 24KiB of # data to SRAM. The BOOT0 header takes 32 bytes, so bootblock is limited to # 24KiB - 32 bytes. -# TODO: make mksunxiboot take the bootblock size as a parameter # TODO: print an error if bootblock is too large (maybe place ROMSTAGE at the # exact offset needed to collide with the bootblock) # FIXME: A10 loads 24KiB. According to Oliver other chips load a little more # -$(obj)/BOOT0: $(obj)/coreboot.rom $(MKSUNXIBOOT) - @printf " BOOT0 $(subst $(obj)/,,$(^))\n" + +$(objcbfs)/bootblock.bin: $(objcbfs)/bootblock.raw.bin $(MKSUNXIBOOT) + @printf " Prepending BOOT0 header $(subst $(obj)/,,$(^))\n" $(MKSUNXIBOOT) $(word 1, $^) $@ -- To view, visit https://review.coreboot.org/c/coreboot/+/35401 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: 4.8_branch Gerrit-Change-Id: I974a6aaa1a340c6b26f78b9d038be0f580331831 Gerrit-Change-Number: 35401 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

3 6

Change in ...coreboot[master]: [NOTFORMERGE] intel/d945gclf board fork attempt
by junaid (Code Review) 07 Aug '23

07 Aug '23

junaid has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/30977 Change subject: [NOTFORMERGE] intel/d945gclf board fork attempt ...................................................................... [NOTFORMERGE] intel/d945gclf board fork attempt port coreboot for som4461. 1.make a folder advantech in mainboard . 2.change vendor name in Kconfig.name files accordingly. 3.copy folder intle/d945gclf in advantech folder. rename folder with som4461 4.In som4461/kconfig.name change board name to som4461 5.In som4461/kconfig , change existing superio to select SUPERIO_WINBOND_W83627DHG 6.In som4461/devicetree.cb change existing chip to chip superio/winbond/w83627dhg 7.Change gpio.c as per inteltool.log of som4461 8.Change romstage.c , include winbond.h and w83627dhg.h 9.make menuconfig, slect vendor--> advantech , model--> som4461, chipset-->donot include microcode, select coreinfo as payload 10. coreboot.Rom file made 11. when dump in 4461 board , nothing appeares on serial console. Change-Id: I7ea260021dc8033c58f134a5c60cdcae12b44d88 Signed-off-by: junaid <junaidimpex(a)gmail.com> --- A src/mainboard/advantech/Kconfig A src/mainboard/advantech/Kconfig.name A src/mainboard/advantech/som4461/Kconfig A src/mainboard/advantech/som4461/Kconfig.name A src/mainboard/advantech/som4461/Makefile.inc A src/mainboard/advantech/som4461/acpi/ec.asl A src/mainboard/advantech/som4461/acpi/ich7_pci_irqs.asl A src/mainboard/advantech/som4461/acpi/mainboard.asl A src/mainboard/advantech/som4461/acpi/platform.asl A src/mainboard/advantech/som4461/acpi/superio.asl A src/mainboard/advantech/som4461/acpi/thermal.asl A src/mainboard/advantech/som4461/acpi_tables.c A src/mainboard/advantech/som4461/board_info.txt A src/mainboard/advantech/som4461/cmos.default A src/mainboard/advantech/som4461/cmos.layout A src/mainboard/advantech/som4461/cstates.c A src/mainboard/advantech/som4461/data.vbt A src/mainboard/advantech/som4461/devicetree.cb A src/mainboard/advantech/som4461/dsdt.asl A src/mainboard/advantech/som4461/gpio.c A src/mainboard/advantech/som4461/hda_verb.c A src/mainboard/advantech/som4461/irq_tables.c A src/mainboard/advantech/som4461/mptable.c A src/mainboard/advantech/som4461/romstage.c 24 files changed, 1,209 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/77/30977/1 diff --git a/src/mainboard/advantech/Kconfig b/src/mainboard/advantech/Kconfig new file mode 100644 index 0000000..b464c1a --- /dev/null +++ b/src/mainboard/advantech/Kconfig @@ -0,0 +1,30 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2011 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +if VENDOR_ADVANTECH + +choice + prompt "Mainboard model" + +source "src/mainboard/advantech/*/Kconfig.name" + +endchoice + +source "src/mainboard/advantech/*/Kconfig" + +config MAINBOARD_VENDOR + string + default "Advantech" + +endif # VENDOR_ADVANTECH diff --git a/src/mainboard/advantech/Kconfig.name b/src/mainboard/advantech/Kconfig.name new file mode 100644 index 0000000..8862ffc --- /dev/null +++ b/src/mainboard/advantech/Kconfig.name @@ -0,0 +1,2 @@ +config VENDOR_ADVANTECH + bool "Advantech" diff --git a/src/mainboard/advantech/som4461/Kconfig b/src/mainboard/advantech/som4461/Kconfig new file mode 100644 index 0000000..24dc984 --- /dev/null +++ b/src/mainboard/advantech/som4461/Kconfig @@ -0,0 +1,51 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +if BOARD_ADVANTECH_SOM4461 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select CPU_INTEL_SOCKET_441 + select NORTHBRIDGE_INTEL_I945 + select NORTHBRIDGE_INTEL_SUBTYPE_I945GC + select SOUTHBRIDGE_INTEL_I82801GX + select SUPERIO_WINBOND_W83627DHG + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_ACPI_TABLES + select HAVE_ACPI_RESUME + select BOARD_ROMSIZE_KB_512 + select CHANNEL_XOR_RANDOMIZATION + select MAINBOARD_HAS_NATIVE_VGA_INIT + select INTEL_GMA_HAVE_VBT + +config MAINBOARD_DIR + string + default advantech/som4461 + +config MAINBOARD_PART_NUMBER + string + default "SOM4461" + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 4 + +endif # BOARD_ADVANTECH_SOM4461 diff --git a/src/mainboard/advantech/som4461/Kconfig.name b/src/mainboard/advantech/som4461/Kconfig.name new file mode 100644 index 0000000..1ff7de8 --- /dev/null +++ b/src/mainboard/advantech/som4461/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_ADVANTECH_SOM4461 + bool "SOM4461" diff --git a/src/mainboard/advantech/som4461/Makefile.inc b/src/mainboard/advantech/som4461/Makefile.inc new file mode 100644 index 0000000..f3d7e76 --- /dev/null +++ b/src/mainboard/advantech/som4461/Makefile.inc @@ -0,0 +1,2 @@ +ramstage-y += cstates.c +romstage-y += gpio.c diff --git a/src/mainboard/advantech/som4461/acpi/ec.asl b/src/mainboard/advantech/som4461/acpi/ec.asl new file mode 100644 index 0000000..5362bb2 --- /dev/null +++ b/src/mainboard/advantech/som4461/acpi/ec.asl @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Device(EC0) +{ + Name (_HID, EISAID("PNP0C09")) + Name (_UID, 1) + + // _REG method requires that an operation region be defined. + OperationRegion (ERAM, EmbeddedControl, 0x00, 0xff) + Field (ERAM, ByteAcc, Lock, Preserve) + { + } + + Method (_CRS, 0, Serialized) + { + Name (ECMD, ResourceTemplate() + { + IO (Decode16, 0x62, 0x62, 0, 1) + IO (Decode16, 0x66, 0x66, 0, 1) + }) + + Return (ECMD) + } + + Method (_REG, 2) + { + // This method is needed by Windows XP/2000 + // for EC initialization before a driver + // is loaded + } + + Name (_GPE, 23) // GPI07 / GPE23 -> Runtime SCI + + // TODO EC Query methods + + // TODO Scope _SB devices for AC power, LID, Power button + +} diff --git a/src/mainboard/advantech/som4461/acpi/ich7_pci_irqs.asl b/src/mainboard/advantech/som4461/acpi/ich7_pci_irqs.asl new file mode 100644 index 0000000..0da7e70 --- /dev/null +++ b/src/mainboard/advantech/som4461/acpi/ich7_pci_irqs.asl @@ -0,0 +1,78 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* This is board specific information: IRQ routing for the + * 0:1e.0 PCI bridge of the ICH7 + */ + +If (PICM) { + Return (Package() { + Package() { 0x0000ffff, 0, 0, 21}, + Package() { 0x0000ffff, 1, 0, 22}, + Package() { 0x0000ffff, 2, 0, 23}, + Package() { 0x0000ffff, 3, 0, 20}, + + Package() { 0x0001ffff, 0, 0, 22}, + Package() { 0x0001ffff, 1, 0, 21}, + Package() { 0x0001ffff, 2, 0, 20}, + Package() { 0x0001ffff, 3, 0, 23}, + + Package() { 0x0002ffff, 0, 0, 18}, + Package() { 0x0002ffff, 1, 0, 19}, + Package() { 0x0002ffff, 2, 0, 17}, + Package() { 0x0002ffff, 3, 0, 16}, + + Package() { 0x0003ffff, 0, 0, 19}, + Package() { 0x0003ffff, 1, 0, 18}, + Package() { 0x0003ffff, 2, 0, 21}, + Package() { 0x0003ffff, 3, 0, 22}, + + Package() { 0x0005ffff, 0, 0, 17}, + Package() { 0x0005ffff, 1, 0, 20}, + Package() { 0x0005ffff, 2, 0, 22}, + Package() { 0x0005ffff, 3, 0, 21}, + + Package() { 0x0008ffff, 0, 0, 20}, + }) +} Else { + Return (Package() { + Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKF, 0}, + Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKH, 0}, + Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKE, 0}, + + Package() { 0x0001ffff, 0, \_SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0001ffff, 1, \_SB.PCI0.LPCB.LNKF, 0}, + Package() { 0x0001ffff, 2, \_SB.PCI0.LPCB.LNKE, 0}, + Package() { 0x0001ffff, 3, \_SB.PCI0.LPCB.LNKH, 0}, + + Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKC, 0}, + Package() { 0x0002ffff, 1, \_SB.PCI0.LPCB.LNKD, 0}, + Package() { 0x0002ffff, 2, \_SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0002ffff, 3, \_SB.PCI0.LPCB.LNKA, 0}, + + Package() { 0x0003ffff, 0, \_SB.PCI0.LPCB.LNKD, 0}, + Package() { 0x0003ffff, 1, \_SB.PCI0.LPCB.LNKC, 0}, + Package() { 0x0003ffff, 2, \_SB.PCI0.LPCB.LNKF, 0}, + Package() { 0x0003ffff, 3, \_SB.PCI0.LPCB.LNKG, 0}, + + Package() { 0x0005ffff, 0, \_SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0005ffff, 1, \_SB.PCI0.LPCB.LNKE, 0}, + Package() { 0x0005ffff, 2, \_SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0005ffff, 3, \_SB.PCI0.LPCB.LNKF, 0}, + + Package() { 0x0008ffff, 0, \_SB.PCI0.LPCB.LNKE, 0}, + }) +} diff --git a/src/mainboard/advantech/som4461/acpi/mainboard.asl b/src/mainboard/advantech/som4461/acpi/mainboard.asl new file mode 100644 index 0000000..0454c3f --- /dev/null +++ b/src/mainboard/advantech/som4461/acpi/mainboard.asl @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Device (SLPB) +{ + Name(_HID, EisaId("PNP0C0E")) + + // Wake + Name(_PRW, Package(){0x1d, 0x04}) +} + +Device (PWRB) +{ + Name(_HID, EisaId("PNP0C0C")) + + // Wake + Name(_PRW, Package(){0x1d, 0x04}) +} diff --git a/src/mainboard/advantech/som4461/acpi/platform.asl b/src/mainboard/advantech/som4461/acpi/platform.asl new file mode 100644 index 0000000..21eb3df --- /dev/null +++ b/src/mainboard/advantech/som4461/acpi/platform.asl @@ -0,0 +1,48 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + // Call a trap so SMI can prepare for Sleep as well. + // TRAP(0x55) +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + // CPU specific part + + // Notify PCI Express slots in case a card + // was inserted while a sleep state was active. + + // Are we going to S3? + If (LEqual(Arg0, 3)) { + // .. + } + + // Are we going to S4? + If (LEqual(Arg0, 4)) { + // .. + } + + // TODO: Windows XP SP2 P-State restore + + Return(Package(){0,0}) +} diff --git a/src/mainboard/advantech/som4461/acpi/superio.asl b/src/mainboard/advantech/som4461/acpi/superio.asl new file mode 100644 index 0000000..152302e --- /dev/null +++ b/src/mainboard/advantech/som4461/acpi/superio.asl @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +Device (SIO1) +{ + Name (_HID, EISAID("PNP0A05")) + Name (_UID, 1) + + Device (UAR1) + { + Name(_HID, EISAID("PNP0501")) + Name(_UID, 1) + + // Some methods need an implementation here: + // missing: _STA, _DIS, _CRS, _PRS, + // missing: _SRS, _PS0, _PS3 + } + + Device (UAR2) + { + Name(_HID, EISAID("PNP0501")) + Name(_UID, 2) + + // Some methods need an implementation here: + // missing: _STA, _DIS, _CRS, _PRS, + // missing: _SRS, _PS0, _PS3 + } +} diff --git a/src/mainboard/advantech/som4461/acpi/thermal.asl b/src/mainboard/advantech/som4461/acpi/thermal.asl new file mode 100644 index 0000000..27337d4 --- /dev/null +++ b/src/mainboard/advantech/som4461/acpi/thermal.asl @@ -0,0 +1,89 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +// Thermal Zone + +Scope (\_TZ) +{ + ThermalZone (THRM) + { + + // FIXME these could/should be read from the + // GNVS area, so they can be controlled by + // coreboot + Name(TC1V, 0x04) + Name(TC2V, 0x03) + Name(TSPV, 0x64) + + // At which temperature should the OS start + // active cooling? + Method (_AC0, 0, Serialized) + { + Return (0xf5c) // Value for Rocky + } + + // Method (_AC1, 0, Serialized) + // { + // Return (0xf5c) + // } + + // Critical shutdown temperature + Method (_CRT, 0, Serialized) + { + Return (Add (0x0aac, 0x50)) // FIXME + } + + // CPU throttling start temperature + Method (_PSV, 0, Serialized) + { + Return (0xaaf) // FIXME + } + + // Get DTS Temperature + Method (_TMP, 0, Serialized) + { + Return (0xaac) // FIXME + } + + // Processors used for active cooling + Method (_PSL, 0, Serialized) + { + If (MPEN) { + Return (Package() {\_PR.CP01, \_PR.CP02}) + } + Return (Package() {\_PR.CP01}) + } + + // TC1 value for passive cooling + Method (_TC1, 0, Serialized) + { + Return (TC1V) + } + + // TC2 value for passive cooling + Method (_TC2, 0, Serialized) + { + Return (TC2V) + } + + // Sampling period for passive cooling + Method (_TSP, 0, Serialized) + { + Return (TSPV) + } + + + } +} diff --git a/src/mainboard/advantech/som4461/acpi_tables.c b/src/mainboard/advantech/som4461/acpi_tables.c new file mode 100644 index 0000000..ba3995e --- /dev/null +++ b/src/mainboard/advantech/som4461/acpi_tables.c @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdint.h> +#include <southbridge/intel/i82801gx/nvs.h> + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ +} diff --git a/src/mainboard/advantech/som4461/board_info.txt b/src/mainboard/advantech/som4461/board_info.txt new file mode 100644 index 0000000..d2bead1 --- /dev/null +++ b/src/mainboard/advantech/som4461/board_info.txt @@ -0,0 +1,3 @@ +Category: mini +Board URL: http://www.http://origindownload.advantech.com/ProductFile/PIS/SOM-4461/Pro… +Release year: 2011 diff --git a/src/mainboard/advantech/som4461/cmos.default b/src/mainboard/advantech/som4461/cmos.default new file mode 100644 index 0000000..2cb37df --- /dev/null +++ b/src/mainboard/advantech/som4461/cmos.default @@ -0,0 +1,6 @@ +boot_option=Fallback +debug_level=Debug +hyper_threading=Enable +nmi=Enable +boot_devices='' +gfx_uma_size=8M diff --git a/src/mainboard/advantech/som4461/cmos.layout b/src/mainboard/advantech/som4461/cmos.layout new file mode 100644 index 0000000..bdc264b --- /dev/null +++ b/src/mainboard/advantech/som4461/cmos.layout @@ -0,0 +1,114 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2007-2008 coresystems GmbH +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +# ----------------------------------------------------------------- +entries + +# ----------------------------------------------------------------- +# Status Register A +# ----------------------------------------------------------------- +# Status Register B +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +388 4 h 0 reboot_counter +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +#392 3 r 0 unused +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail + +# coreboot config options: northbridge +411 3 e 11 gfx_uma_size + +# coreboot config options: bootloader +416 512 s 0 boot_devices +#928 80 r 0 unused + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# RAM initialization internal data +1024 8 r 0 C0WL0REOST +1032 8 r 0 C1WL0REOST +1040 8 r 0 RCVENMT +1048 4 r 0 C0DRT1 +1052 4 r 0 C1DRT1 + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +6 0 Emergency +6 1 Alert +6 2 Critical +6 3 Error +6 4 Warning +6 5 Notice +6 6 Info +6 7 Debug +6 8 Spew +7 0 Disable +7 1 Enable +7 2 Keep +11 0 1M +11 1 4M +11 2 8M +11 3 16M +11 4 32M +11 5 48M +11 6 64M + +# ----------------------------------------------------------------- +checksums + +checksum 392 983 984 diff --git a/src/mainboard/advantech/som4461/cstates.c b/src/mainboard/advantech/som4461/cstates.c new file mode 100644 index 0000000..f683756 --- /dev/null +++ b/src/mainboard/advantech/som4461/cstates.c @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/device.h> +#include <arch/x86/include/arch/acpigen.h> + +int get_cst_entries(acpi_cstate_t **entries) +{ + return 0; +} diff --git a/src/mainboard/advantech/som4461/data.vbt b/src/mainboard/advantech/som4461/data.vbt new file mode 100644 index 0000000..326eab7 --- /dev/null +++ b/src/mainboard/advantech/som4461/data.vbt Binary files differ diff --git a/src/mainboard/advantech/som4461/devicetree.cb b/src/mainboard/advantech/som4461/devicetree.cb new file mode 100644 index 0000000..864775a --- /dev/null +++ b/src/mainboard/advantech/som4461/devicetree.cb @@ -0,0 +1,106 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +chip northbridge/intel/i945 + + device cpu_cluster 0 on + chip cpu/intel/socket_441 + device lapic 0 on end + end + end + + register "pci_mmio_size" = "768" + + device domain 0 on + subsystemid 0x8086 0x464c inherit + device pci 00.0 on end # host bridge + device pci 01.0 off end # i945 PCIe root port + device pci 02.0 on end # vga controller + device pci 02.1 on end # display controller + + chip southbridge/intel/i82801gx + register "pirqa_routing" = "0x05" + register "pirqb_routing" = "0x07" + register "pirqc_routing" = "0x05" + register "pirqd_routing" = "0x07" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x06" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "gpi13_routing" = "1" + register "gpe0_en" = "0x20000601" + + register "ide_legacy_combined" = "0x0" + register "ide_enable_primary" = "0x1" + register "ide_enable_secondary" = "0x0" + register "sata_ahci" = "0x0" + register "c3_latency" = "85" + register "p_cnt_throttling_supported" = "0" + + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe port 1 + device pci 1c.1 off end # PCIe port 2 + device pci 1c.2 on end # PCIe port 3 + device pci 1c.3 on end # PCIe port 4 + device pci 1c.4 off end # PCIe port 5 + device pci 1c.5 off end # PCIe port 6 + device pci 1d.0 on end # USB UHCI + device pci 1d.1 on end # USB UHCI + device pci 1d.2 on end # USB UHCI + device pci 1d.3 off end # USB UHCI + device pci 1d.7 on end # USB2 EHCI + device pci 1e.0 on end # PCI bridge + device pci 1e.2 off end # AC'97 Audio + device pci 1e.3 off end # AC'97 Modem + device pci 1f.0 on # LPC bridge + chip superio/winbond/w83627dhg + device pnp 2e.0 off end # Floppy + device pnp 2e.1 off end # Parallel Port + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard,Mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + #device pnp 2e.6 off end # SPI + device pnp 2e.307 off end # GPIO6 + device pnp 2e.8 off end # WDTO, PLED + device pnp 2e.009 off end # GPIO2 + device pnp 2e.109 off end # GPIO3 + device pnp 2e.209 off end # GPIO4 + device pnp 2e.309 off end # GPIO5 + device pnp 2e.A off end # ACPI + device pnp 2e.B off end # HW Monitor + end # w83627dhg + end + device pci 1f.1 off end # IDE + device pci 1f.2 on end # SATA + device pci 1f.3 on end # SMBus + end + end +end diff --git a/src/mainboard/advantech/som4461/dsdt.asl b/src/mainboard/advantech/som4461/dsdt.asl new file mode 100644 index 0000000..95ed8d9 --- /dev/null +++ b/src/mainboard/advantech/som4461/dsdt.asl @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20090419 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/i82801gx/acpi/globalnvs.asl> + #include <southbridge/intel/common/acpi/platform.asl> + + // General Purpose Events + //#include "acpi/gpe.asl" + + // mainboard specific devices + #include "acpi/mainboard.asl" + + // Thermal Zone + //#include "acpi/thermal.asl" + + #include <cpu/intel/speedstep/acpi/cpu.asl> + + Scope (\_SB) { + Device (PCI0) + { + #include <northbridge/intel/i945/acpi/i945.asl> + #include <southbridge/intel/i82801gx/acpi/ich7.asl> + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/i82801gx/acpi/sleepstates.asl> +} diff --git a/src/mainboard/advantech/som4461/gpio.c b/src/mainboard/advantech/som4461/gpio.c new file mode 100644 index 0000000..cd5a1fc --- /dev/null +++ b/src/mainboard/advantech/som4461/gpio.c @@ -0,0 +1,127 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Arthur Heymans <arthur(a)aheymans.xyz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_GPIO, + .gpio10 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio19 = GPIO_MODE_GPIO, + .gpio21 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_GPIO, + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_OUTPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + + .gpio12 = GPIO_DIR_INPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + + .gpio19 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + + .gpio23 = GPIO_DIR_OUTPUT, + + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_OUTPUT, + .gpio26 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, + +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + + .gpio7 = GPIO_LEVEL_HIGH, + .gpio23 = GPIO_LEVEL_HIGH, + + .gpio24 = GPIO_LEVEL_HIGH, + .gpio25 = GPIO_LEVEL_HIGH, + + .gpio26 = GPIO_LEVEL_LOW, + .gpio27 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, + +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio13 = GPIO_INVERT, + .gpio15 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_OUTPUT, + + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio33 = GPIO_LEVEL_HIGH, + .gpio34 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, +}; diff --git a/src/mainboard/advantech/som4461/hda_verb.c b/src/mainboard/advantech/som4461/hda_verb.c new file mode 100644 index 0000000..5d08879 --- /dev/null +++ b/src/mainboard/advantech/som4461/hda_verb.c @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[0] = {}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/advantech/som4461/irq_tables.c b/src/mainboard/advantech/som4461/irq_tables.c new file mode 100644 index 0000000..1a7e85b --- /dev/null +++ b/src/mainboard/advantech/som4461/irq_tables.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*18, /* There can be total 18 devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x1f << 3)|0x0, /* Where the interrupt router lies (dev) */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x27b0, /* Device */ + 0, /* miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xf, /* u8 checksum. */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x01 << 3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // PCIe? + {0x00,(0x02 << 3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // VGA + {0x00,(0x1e << 3)|0x0, {{0x61, 0xdcf8}, {0x68, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // PCI bridge + {0x00,(0x1f << 3)|0x0, {{0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // LPC + {0x00,(0x1d << 3)|0x0, {{0x6b, 0xdcf8}, {0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x60, 0x0dcf8}}, 0x0, 0x0}, // USB#1 + {0x00,(0x1b << 3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Audio device + {0x00,(0x1c << 3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x2, 0x0}, // PCIe bridge + {0x04,(0x00 << 3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Firewire + {0x04,(0x01 << 3)|0x0, {{0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0x0dcf8}}, 0x1, 0x0}, // PCI Bridge + {0x04,(0x02 << 3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x2, 0x0}, + {0x04,(0x03 << 3)|0x0, {{0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0x0dcf8}}, 0x3, 0x0}, + {0x04,(0x04 << 3)|0x0, {{0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0x0dcf8}}, 0x4, 0x0}, + {0x04,(0x05 << 3)|0x0, {{0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0x0dcf8}}, 0x5, 0x0}, + {0x04,(0x06 << 3)|0x0, {{0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0xdcf8}, {0x63, 0x0dcd8}}, 0x6, 0x0}, + {0x04,(0x09 << 3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x9, 0x0}, + {0x01,(0x00 << 3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // Ethernet 8168 + {0x02,(0x00 << 3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x9, 0x0}, + {0x03,(0x00 << 3)|0x0, {{0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x60, 0x0dcf8}}, 0xa, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/advantech/som4461/mptable.c b/src/mainboard/advantech/som4461/mptable.c new file mode 100644 index 0000000..d9aa098 --- /dev/null +++ b/src/mainboard/advantech/som4461/mptable.c @@ -0,0 +1,85 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/device.h> +#include <device/pci.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <string.h> +#include <stdint.h> + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int isa_bus; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + mptable_write_buses(mc, NULL, &isa_bus); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, 2, 0x20, VIO_APIC_VADDR); + + /* Legacy Interrupts */ + + mptable_add_isa_interrupts(mc, isa_bus, 0x2, 0); + + /* Builtin devices on Bus 0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x8, 0x2, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x7d, 0x2, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x74, 0x2, 0x17); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x75, 0x2, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x76, 0x2, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x77, 0x2, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x6c, 0x2, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x70, 0x2, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x71, 0x2, 0x11); + + /* Firewire 4:0.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x0, 0x2, 0x10); + + /* Old riser card */ + // riser slot top 5:8.0 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x20, 0x2, 0x14); + // riser slot middle 5:9.0 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x24, 0x2, 0x15); + // riser slot bottom 5:a.0 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x28, 0x2, 0x16); + + /* New Riser Card */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x30, 0x2, 0x14); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x34, 0x2, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x38, 0x2, 0x16); + + /* Onboard Ethernet */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, 0x0, 0x2, 0x10); + + /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + mptable_lintsrc(mc, isa_bus); + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/advantech/som4461/romstage.c b/src/mainboard/advantech/som4461/romstage.c new file mode 100644 index 0000000..7671f9f --- /dev/null +++ b/src/mainboard/advantech/som4461/romstage.c @@ -0,0 +1,173 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +// __PRE_RAM__ means: use "unsigned" for device, not a struct. +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627dhg/w83627dhg.h> +#include <console/console.h> +#include <cpu/x86/bist.h> +#include <cpu/intel/romstage.h> +#include <northbridge/intel/i945/i945.h> +#include <northbridge/intel/i945/raminit.h> +#include <southbridge/intel/i82801gx/i82801gx.h> +#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1) +#define GPIO_DEV PNP_DEV(0x2e, W83627DHG_GPIO2345_V) +static void ich7_enable_lpc(void) +{ + // Enable Serial IRQ + pci_write_config8(PCI_DEV(0, 0x1f, 0), SERIRQ_CNTL, 0xd0); + // Set COM1/COM2 decode range + pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_IO_DEC, 0x0010); + // Enable COM1 + pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_EN, CNF1_LPC_EN | KBC_LPC_EN + | FDD_LPC_EN | LPT_LPC_EN | COMA_LPC_EN); + // Enable SuperIO Power Management Events + pci_write_config32(PCI_DEV(0, 0x1f, 0), GEN1_DEC, 0x007c0681); +} + +static void rcba_config(void) +{ + /* Set up virtual channel 0 */ + //RCBA32(0x0014) = 0x80000001; + //RCBA32(0x001c) = 0x03128010; + + /* dev irq route register */ + RCBA16(D31IR) = 0x0132; + RCBA16(D30IR) = 0x0146; + RCBA16(D29IR) = 0x0237; + RCBA16(D28IR) = 0x3201; + RCBA16(D27IR) = 0x0146; + + /* Enable IOAPIC */ + RCBA8(OIC) = 0x03; + + /* Disable unused devices */ + RCBA32(FD) |= FD_INTLAN; + + /* Enable PCIe Root Port Clock Gate */ + // RCBA32(0x341c) = 0x00000001; +} + +static void early_ich7_init(void) +{ + uint8_t reg8; + uint32_t reg32; + + // program secondary mlt XXX byte? + pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20); + + // reset rtc power status + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); + reg8 &= ~(1 << 2); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8); + + // usb transient disconnect + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); + reg8 |= (3 << 0); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); + reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); + reg32 |= (1 << 29) | (1 << 17); + pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); + reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); + reg32 |= (1 << 31) | (1 << 27); + pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); + RCBA32(0x0088) = 0x0011d000; + RCBA16(0x01fc) = 0x060f; + RCBA32(0x01f4) = 0x86000040; + RCBA32(0x0214) = 0x10030549; + RCBA32(0x0218) = 0x00020504; + RCBA8(0x0220) = 0xc5; + reg32 = RCBA32(0x3410); + reg32 |= (1 << 6); + RCBA32(0x3410) = reg32; + reg32 = RCBA32(0x3430); + reg32 &= ~(3 << 0); + reg32 |= (1 << 0); + RCBA32(0x3430) = reg32; + RCBA16(0x0200) = 0x2008; + RCBA8(0x2027) = 0x0d; + RCBA16(0x3e08) |= (1 << 7); + RCBA16(0x3e48) |= (1 << 7); + RCBA32(0x3e0e) |= (1 << 7); + RCBA32(0x3e4e) |= (1 << 7); + + // next step only on ich7m b0 and later: + reg32 = RCBA32(0x2034); + reg32 &= ~(0x0f << 16); + reg32 |= (5 << 16); + RCBA32(0x2034) = reg32; +} + +void mainboard_romstage_entry(unsigned long bist) +{ + int s3resume = 0, boot_mode = 0; + + if (bist == 0) + enable_lapic(); + + ich7_enable_lpc(); + /* Enable SuperIO PM */ + //lpc47m15x_enable_serial(PME_DEV, 0x680); + + //lpc47m15x_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); /* 0x3f8 */ + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + /* Set up the console */ + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + if (MCHBAR16(SSKPD) == 0xCAFE) +{ + printk(BIOS_DEBUG, "soft reset detected.\n"); + boot_mode = 1; +} + + /* Perform some early chipset initialization required + * before RAM initialization can work + */ + i945_early_initialization(); + + s3resume = southbridge_detect_s3_resume(); + + /* Enable SPD ROMs and DDR-II DRAM */ + enable_smbus(); + +#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 + dump_spd_registers(); +#endif + + sdram_initialize(s3resume ? 2 : boot_mode, NULL); + + /* Perform some initialization that must run before stage2 */ + early_ich7_init(); + + /* This should probably go away. Until now it is required + * and mainboard specific + */ + rcba_config(); + + /* Chipset Errata! */ + fixup_i945_errata(); + + /* Initialize the internal PCIe links before we go into stage2 */ + i945_late_initialization(s3resume); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/30977 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I7ea260021dc8033c58f134a5c60cdcae12b44d88 Gerrit-Change-Number: 30977 Gerrit-PatchSet: 1 Gerrit-Owner: junaid <junaidimpex(a)gmail.com> Gerrit-MessageType: newchange

5 5

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit September 2019