Subrata Banik has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/61823 )
Change subject: mb/google/var/{brya0, brya4es}: Use ACPI _PLD macro ......................................................................
mb/google/var/{brya0, brya4es}: Use ACPI _PLD macro
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477 TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik subratabanik@google.com Change-Id: I1940246fd88db29054f85c43672adc97dc90fa04 --- M src/mainboard/google/brya/variants/brya0/overridetree.cb M src/mainboard/google/brya/variants/brya4es/overridetree.cb 2 files changed, 16 insertions(+), 96 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/23/61823/1
diff --git a/src/mainboard/google/brya/variants/brya0/overridetree.cb b/src/mainboard/google/brya/variants/brya0/overridetree.cb index e7e7f73..3f50fa4 100644 --- a/src/mainboard/google/brya/variants/brya0/overridetree.cb +++ b/src/mainboard/google/brya/variants/brya0/overridetree.cb @@ -664,36 +664,21 @@ register "desc" = ""USB3 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_CENTER, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(1, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, CENTER, ACPI_PLD_GROUP(1, 1))" device ref tcss_usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_RIGHT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(2, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))" device ref tcss_usb3_port2 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(3, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(3, 1))" device ref tcss_usb3_port3 on end end end @@ -706,36 +691,21 @@ register "desc" = ""USB2 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_CENTER, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(1, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, CENTER, ACPI_PLD_GROUP(1, 1))" device ref usb2_port1 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_RIGHT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(2, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))" device ref usb2_port2 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(3, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(3, 1))" device ref usb2_port3 on end end chip drivers/usb/acpi @@ -754,12 +724,7 @@ register "desc" = ""USB2 Type-A Port A0 (DB)"" register "type" = "UPC_TYPE_A" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_RIGHT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, - .group = ACPI_PLD_GROUP(1, 2)}" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(1, 2))" device ref usb2_port9 on end end chip drivers/usb/acpi @@ -773,12 +738,7 @@ register "desc" = ""USB3 Type-A Port A0 (DB)"" register "type" = "UPC_TYPE_USB3_A" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_RIGHT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, - .group = ACPI_PLD_GROUP(1, 2)}" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(1, 2))" device ref usb3_port1 on end end chip drivers/usb/acpi diff --git a/src/mainboard/google/brya/variants/brya4es/overridetree.cb b/src/mainboard/google/brya/variants/brya4es/overridetree.cb index dd5650e..c0733cf 100644 --- a/src/mainboard/google/brya/variants/brya4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/brya4es/overridetree.cb @@ -660,36 +660,21 @@ register "desc" = ""USB3 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_CENTER, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(1, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, CENTER, ACPI_PLD_GROUP(1, 1))" device ref tcss_usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_RIGHT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(2, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))" device ref tcss_usb3_port2 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(3, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(3, 1))" device ref tcss_usb3_port3 on end end end @@ -702,36 +687,21 @@ register "desc" = ""USB2 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_CENTER, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(1, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, CENTER, ACPI_PLD_GROUP(1, 1))" device ref usb2_port1 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_RIGHT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(2, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))" device ref usb2_port2 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(3, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(3, 1))" device ref usb2_port3 on end end chip drivers/usb/acpi @@ -750,12 +720,7 @@ register "desc" = ""USB2 Type-A Port A0 (DB)"" register "type" = "UPC_TYPE_A" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_RIGHT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, - .group = ACPI_PLD_GROUP(1, 2)}" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(1, 2))" device ref usb2_port9 on end end chip drivers/usb/acpi @@ -769,12 +734,7 @@ register "desc" = ""USB3 Type-A Port A0 (DB)"" register "type" = "UPC_TYPE_USB3_A" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_RIGHT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, - .group = ACPI_PLD_GROUP(1, 2)}" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(1, 2))" device ref usb3_port1 on end end chip drivers/usb/acpi