[coreboot-gerrit] [XS] Change in coreboot[main]: mb/lenovo/x230: Convert remaining PCI numbers into reference names

[Felix Singer (Code Review)]

Felix Singer has submitted this change. ( https://review.coreboot.org/c/coreboot/+/79963?usp=email )

Change subject: mb/lenovo/x230: Convert remaining PCI numbers into reference names
......................................................................

mb/lenovo/x230: Convert remaining PCI numbers into reference names

Change-Id: I38ef315dbdadb140e8e7163e755a078bc906e1b5
Signed-off-by: Felix Singer 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79963
Tested-by: build bot (Jenkins) 
Reviewed-by: Patrick Rudolph 
---
M src/mainboard/lenovo/x230/variants/x230/overridetree.cb
M src/mainboard/lenovo/x230/variants/x230s/overridetree.cb
2 files changed, 3 insertions(+), 3 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Patrick Rudolph: Looks good to me, approved

diff --git a/src/mainboard/lenovo/x230/variants/x230/overridetree.cb b/src/mainboard/lenovo/x230/variants/x230/overridetree.cb
index 978d017..487bdfe 100644
--- a/src/mainboard/lenovo/x230/variants/x230/overridetree.cb
+++ b/src/mainboard/lenovo/x230/variants/x230/overridetree.cb
@@ -3,10 +3,10 @@
    	chip southbridge/intel/bd82x6x # Intel Series 7 Panther Point PCH
    		register "docking_supported" = "1"
    		register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 0, 0 }"
-			device pci 1c.2 on
+			device ref pcie_rp3 on
    			smbios_slot_desc "7" "3" "ExpressCard Slot" "8"
    		end # PCIe Port #3 (expresscard)
-			device pci 1f.0 on # LPC bridge
+			device ref lpc on # LPC bridge
    			chip ec/lenovo/h8
    				register "eventa_enable" = "0x01"
    				device pnp ff.2 on end
diff --git a/src/mainboard/lenovo/x230/variants/x230s/overridetree.cb b/src/mainboard/lenovo/x230/variants/x230s/overridetree.cb
index 9d020e3..e30062a 100644
--- a/src/mainboard/lenovo/x230/variants/x230s/overridetree.cb
+++ b/src/mainboard/lenovo/x230/variants/x230s/overridetree.cb
@@ -19,7 +19,7 @@
    		# Enable SATA ports 0 (HDD bay) & 1 (WWAN M.2 SATA)
    		register "sata_port_map" = "0x3"

-			device pci 1f.0 on # LPC bridge
+			device ref lpc on # LPC bridge
    			chip ec/lenovo/h8
    				register "config1" = "0x05"
    				register "config3" = "0xc4"