[coreboot-gerrit] Change in coreboot[master]: drivers/ipmi: add code to set BMC/IPMI enablement from jumper

[Michael Niewöhner (Code Review)]

Hello  Felix Singer, build bot (Jenkins), Nico Huber, Furquan Shaikh, Paul Menzel, Tim Wawrzynczak, Patrick Rudolph,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/48094

to look at the new patch set (#14).

Change subject: drivers/ipmi: add code to set BMC/IPMI enablement from jumper
......................................................................

drivers/ipmi: add code to set BMC/IPMI enablement from jumper

Some boards, like the Supermicro X11SSM-F, have a jumper for enabling or
disabling the BMC and IPMI. Add a new devicetree driver option to set
the GPIO used for the jumper and enable or disable IPMI according to its
value.

This gets used in the follow-up change by Supermicro X11SSM-F.

Test: Boot with jumper set to each enabled and disabled and see if IPMI
gets enabled. Successfully tested on Supermicro X11SSM-F.

Signed-off-by: Michael Niewöhner 
Change-Id: Icde3232843a7138797a4b106560f170972edeb9c
---
M src/drivers/ipmi/chip.h
M src/drivers/ipmi/ipmi_kcs_ops.c
2 files changed, 16 insertions(+), 3 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/94/48094/14