Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/45434 )
Change subject: nb/intel/gm45/gm45.h: Clean up cosmetics ......................................................................
nb/intel/gm45/gm45.h: Clean up cosmetics
Align groups of definitions, reflow long lines and adjust whitespace.
Tested with BUILD_TIMELESS=1, Roda RK9 remains identical.
Change-Id: I2969274c6b50f56994e45ada5d016504addfc13e Signed-off-by: Angel Pons th3fanbus@gmail.com --- M src/northbridge/intel/gm45/gm45.h 1 file changed, 63 insertions(+), 62 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/34/45434/1
diff --git a/src/northbridge/intel/gm45/gm45.h b/src/northbridge/intel/gm45/gm45.h index cdd325d..af42cf9 100644 --- a/src/northbridge/intel/gm45/gm45.h +++ b/src/northbridge/intel/gm45/gm45.h @@ -10,9 +10,9 @@ #include <stdint.h>
typedef enum { - FSB_CLOCK_1067MHz = 0, - FSB_CLOCK_800MHz = 1, - FSB_CLOCK_667MHz = 2, + FSB_CLOCK_1067MHz = 0, + FSB_CLOCK_800MHz = 1, + FSB_CLOCK_667MHz = 2, } fsb_clock_t;
typedef enum { /* Steppings below B1 were pre-production, @@ -43,12 +43,12 @@ } gmch_gfx_t;
typedef enum { - MEM_CLOCK_533MHz = 0, - MEM_CLOCK_400MHz = 1, - MEM_CLOCK_333MHz = 2, - MEM_CLOCK_1067MT = 0, - MEM_CLOCK_800MT = 1, - MEM_CLOCK_667MT = 2, + MEM_CLOCK_533MHz = 0, + MEM_CLOCK_400MHz = 1, + MEM_CLOCK_333MHz = 2, + MEM_CLOCK_1067MT = 0, + MEM_CLOCK_800MT = 1, + MEM_CLOCK_667MT = 2, } mem_clock_t;
typedef enum { @@ -132,6 +132,7 @@ int gs45_low_power_mode; /* low power mode of GMCH_GS45 */ int sff; /* small form factor option (soldered down DIMM) */ } sysinfo_t; + #define TOTAL_CHANNELS 2 #define CHANNEL_IS_POPULATED(dimms, idx) (dimms[idx].card_type != 0) #define CHANNEL_IS_CARDF(dimms, idx) (dimms[idx].card_type == 0xf) @@ -167,8 +168,7 @@ /* Offsets of read/write training results in CMOS. They will be restored upon S3 resumes. */ #define CMOS_READ_TRAINING 0x80 /* 16 bytes */ -#define CMOS_WRITE_TRAINING 0x90 /* 16 bytes - (could be reduced to 10 bytes) */ +#define CMOS_WRITE_TRAINING 0x90 /* 16 bytes (could be reduced to 10 bytes) */
#define DEFAULT_MCHBAR 0xfed14000 @@ -176,44 +176,44 @@ #define DEFAULT_EPBAR 0xfed19000
-#define IOMMU_BASE1 0xfed90000 -#define IOMMU_BASE2 0xfed91000 -#define IOMMU_BASE3 0xfed92000 -#define IOMMU_BASE4 0xfed93000 +#define IOMMU_BASE1 0xfed90000 +#define IOMMU_BASE2 0xfed91000 +#define IOMMU_BASE3 0xfed92000 +#define IOMMU_BASE4 0xfed93000
/* * D0:F0 */ -#define D0F0_EPBAR_LO 0x40 -#define D0F0_EPBAR_HI 0x44 -#define D0F0_MCHBAR_LO 0x48 -#define D0F0_MCHBAR_HI 0x4c -#define D0F0_GGC 0x52 -#define D0F0_DEVEN 0x54 -#define D0F0_PCIEXBAR_LO 0x60 -#define D0F0_PCIEXBAR_HI 0x64 -#define D0F0_DMIBAR_LO 0x68 -#define D0F0_DMIBAR_HI 0x6c -#define D0F0_PMBASE 0x78 -#define D0F0_PAM(x) (0x90+(x)) /* 0-6*/ -#define D0F0_REMAPBASE 0x98 -#define D0F0_REMAPLIMIT 0x9a -#define D0F0_SMRAM 0x9d -#define D0F0_ESMRAMC 0x9e -#define D0F0_TOM 0xa0 -#define D0F0_TOUUD 0xa2 -#define D0F0_TOLUD 0xb0 -#define D0F0_SKPD 0xdc /* Scratchpad Data */ -#define D0F0_CAPID0 0xe0 +#define D0F0_EPBAR_LO 0x40 +#define D0F0_EPBAR_HI 0x44 +#define D0F0_MCHBAR_LO 0x48 +#define D0F0_MCHBAR_HI 0x4c +#define D0F0_GGC 0x52 +#define D0F0_DEVEN 0x54 +#define D0F0_PCIEXBAR_LO 0x60 +#define D0F0_PCIEXBAR_HI 0x64 +#define D0F0_DMIBAR_LO 0x68 +#define D0F0_DMIBAR_HI 0x6c +#define D0F0_PMBASE 0x78 +#define D0F0_PAM(x) (0x90 + (x)) /* 0-6 */ +#define D0F0_REMAPBASE 0x98 +#define D0F0_REMAPLIMIT 0x9a +#define D0F0_SMRAM 0x9d +#define D0F0_ESMRAMC 0x9e +#define D0F0_TOM 0xa0 +#define D0F0_TOUUD 0xa2 +#define D0F0_TOLUD 0xb0 +#define D0F0_SKPD 0xdc /* Scratchpad Data */ +#define D0F0_CAPID0 0xe0
/* * D1:F0 PEG */ -#define PEG_CAP 0xa2 -#define SLOTCAP 0xb4 -#define PEGLC 0xec -#define D1F0_VCCAP 0x104 -#define D1F0_VC0RCTL 0x114 +#define PEG_CAP 0xa2 +#define SLOTCAP 0xb4 +#define PEGLC 0xec +#define D1F0_VCCAP 0x104 +#define D1F0_VC0RCTL 0x114
/* * Graphics frequencies @@ -233,7 +233,7 @@ * MCHBAR */
-#define MCHBAR8(x) *((volatile u8 *)(DEFAULT_MCHBAR + x)) +#define MCHBAR8(x) *((volatile u8 *)(DEFAULT_MCHBAR + x)) #define MCHBAR16(x) *((volatile u16 *)(DEFAULT_MCHBAR + x)) #define MCHBAR32(x) *((volatile u32 *)(DEFAULT_MCHBAR + x))
@@ -288,7 +288,7 @@ * Every two ranks share one register and must be programmed at the same time. * All registers (4 ranks per channel) have to be set. */ -#define CxDRBy_MCHBAR(x, r) (0x1200 + (x * 0x0100) + ((r/2) * 4)) +#define CxDRBy_MCHBAR(x, r) (0x1200 + (x * 0x0100) + ((r / 2) * 4)) #define CxDRBy_BOUND_SHIFT(r) ((r % 2) * 16) #define CxDRBy_BOUND_MASK(r) (0x1fc << CxDRBy_BOUND_SHIFT(r)) #define CxDRBy_BOUND_MB(r, b) /* for boundary in MB b */ \ @@ -346,46 +346,47 @@ /* Write Training registers. */ #define CxWRTy_MCHBAR(ch, s) (0x1470 + (ch * 0x0100) + ((3 - s) * 4))
-#define CxGTEW(x) (0x1270+(x*0x100)) -#define CxGTC(x) (0x1274+(x*0x100)) -#define CxDTPEW(x) (0x1278+(x*0x100)) -#define CxDTAEW(x) (0x1280+(x*0x100)) -#define CxDTC(x) (0x1288+(x*0x100)) +#define CxGTEW(x) (0x1270 + (x * 0x100)) +#define CxGTC(x) (0x1274 + (x * 0x100)) +#define CxDTPEW(x) (0x1278 + (x * 0x100)) +#define CxDTAEW(x) (0x1280 + (x * 0x100)) +#define CxDTC(x) (0x1288 + (x * 0x100))
/* * DMIBAR */
-#define DMIBAR8(x) *((volatile u8 *)(DEFAULT_DMIBAR + x)) +#define DMIBAR8(x) *((volatile u8 *)(DEFAULT_DMIBAR + x)) #define DMIBAR16(x) *((volatile u16 *)(DEFAULT_DMIBAR + x)) #define DMIBAR32(x) *((volatile u32 *)(DEFAULT_DMIBAR + x))
-#define DMIVC0RCTL 0x14 -#define DMIVC1RCTL 0x20 -#define DMIVC1RSTS 0x26 -#define DMIESD 0x44 -#define DMILE1D 0x50 -#define DMILE1A 0x58 -#define DMILE2D 0x60 -#define DMILE2A 0x68 +#define DMIVC0RCTL 0x14 +#define DMIVC1RCTL 0x20 +#define DMIVC1RSTS 0x26 +#define DMIESD 0x44 +#define DMILE1D 0x50 +#define DMILE1A 0x58 +#define DMILE2D 0x60 +#define DMILE2A 0x68
/* * EPBAR */
-#define EPBAR8(x) *((volatile u8 *)(DEFAULT_EPBAR + x)) +#define EPBAR8(x) *((volatile u8 *)(DEFAULT_EPBAR + x)) #define EPBAR16(x) *((volatile u16 *)(DEFAULT_EPBAR + x)) #define EPBAR32(x) *((volatile u32 *)(DEFAULT_EPBAR + x))
-#define EPESD 0x44 -#define EPLE1D 0x50 -#define EPLE1A 0x58 -#define EPLE2D 0x60 +#define EPESD 0x44 +#define EPLE1D 0x50 +#define EPLE1A 0x58 +#define EPLE2D 0x60
#ifndef __ACPI__ + void gm45_early_init(void); void gm45_early_reset(void);