[coreboot-gerrit] Change in coreboot[master]: util/mb/google/tmpl/puff: Fix overridetree.cb to swap USB ports

[Edward O'Callaghan (Code Review)]

Edward O'Callaghan has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/42676 )

Change subject: util/mb/google/tmpl/puff: Fix overridetree.cb to swap USB ports
......................................................................

util/mb/google/tmpl/puff: Fix overridetree.cb to swap USB ports

Switch USB2 port1 and port3 due to circuit change from rev0.

BUG=b:154071868,b:154585046,b:156429564
BRANCH=none
TEST=none

Change-Id: I5b9a20bd657ed587ec891e52f66629d554df6166
Signed-off-by: Edward O'Callaghan 
---
M util/mainboard/google/puff/template/overridetree.cb
1 file changed, 9 insertions(+), 12 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/76/42676/1

diff --git a/util/mainboard/google/puff/template/overridetree.cb b/util/mainboard/google/puff/template/overridetree.cb
index ededac4..55ce5ea 100644
--- a/util/mainboard/google/puff/template/overridetree.cb
+++ b/util/mainboard/google/puff/template/overridetree.cb
@@ -21,9 +21,6 @@
    }"

# USB configuration
-	# NOTE: This only applies to Puff,
-	# usb2_ports[1] and usb2_ports[3] were swapped on
-	# reference schematics after Puff has been built.
    register "usb2_ports[0]" = "{
    	.enable = 1,
    	.ocpin = OC2,
@@ -32,7 +29,14 @@
    	.pre_emp_bias  = USB2_BIAS_11P25MV,
    	.pre_emp_bit   = USB2_HALF_BIT_PRE_EMP,
    }" # Type-A Port 2
-	register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port
+	register "usb2_ports[1]" = "{
+		.enable = 1,
+		.ocpin = OC1,
+		.tx_bias = USB2_BIAS_0MV,
+		.tx_emp_enable = USB2_PRE_EMP_ON,
+		.pre_emp_bias  = USB2_BIAS_28P15MV,
+		.pre_emp_bit   = USB2_HALF_BIT_PRE_EMP,
+	}" # Type-A Port 1
    register "usb2_ports[2]" = "{
    	.enable = 1,
    	.ocpin = OC3,
@@ -41,14 +45,7 @@
    	.pre_emp_bias  = USB2_BIAS_28P15MV,
    	.pre_emp_bit   = USB2_HALF_BIT_PRE_EMP,
    }" # Type-A Port 3
-	register "usb2_ports[3]" = "{
-		.enable = 1,
-		.ocpin = OC1,
-		.tx_bias = USB2_BIAS_0MV,
-		.tx_emp_enable = USB2_PRE_EMP_ON,
-		.pre_emp_bias  = USB2_BIAS_28P15MV,
-		.pre_emp_bit   = USB2_HALF_BIT_PRE_EMP,
-	}" # Type-A Port 1
+	register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port
    register "usb2_ports[4]" = "{
    	.enable = 1,
    	.ocpin = OC_SKIP,