Patrick Georgi (pgeorgi@google.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/9546
-gerrit
commit 6e2649efcc10c0d1bc84d574ab9141ff3835a34c Author: Julius Werner jwerner@chromium.org Date: Thu Nov 6 12:51:24 2014 -0800
veyron_jerry: Remove board ID based assumptions
The veyron_jerry board code was just copied over from veyron_pinky 1-to-1. The Jerry board IDs start at 1, but there has never been a Jerry rev0 so we can remove the code for board ID 0 from it.
BRANCH=none BUG=None TEST=Booted Jerry image on a Pinky rev2, worked fine.
Change-Id: I0f2ffdc577934c1695e8d2dcf71512696ac1d5a5 Signed-off-by: Patrick Georgi pgeorgi@chromium.org Original-Commit-Id: aa36da69ac584b845e15282dae100eec27fc7f12 Original-Change-Id: I45a18b288c8d8b1399ceedf582addcce1c7e857d Original-Signed-off-by: Julius Werner jwerner@chromium.org Original-Reviewed-on: https://chromium-review.googlesource.com/228254 Original-Reviewed-by: David Hendricks dhendrix@chromium.org --- src/mainboard/google/veyron_jerry/board.h | 2 +- src/mainboard/google/veyron_jerry/chromeos.c | 4 +-- src/mainboard/google/veyron_jerry/mainboard.c | 44 ++++----------------------- 3 files changed, 8 insertions(+), 42 deletions(-)
diff --git a/src/mainboard/google/veyron_jerry/board.h b/src/mainboard/google/veyron_jerry/board.h index 6162b03..2b1643d 100644 --- a/src/mainboard/google/veyron_jerry/board.h +++ b/src/mainboard/google/veyron_jerry/board.h @@ -25,7 +25,7 @@
#define PMIC_BUS 0
-#define GPIO_RESET (board_id() > 0 ? GPIO(0, B, 5) : GPIO(0, B, 2)) +#define GPIO_RESET GPIO(0, B, 5)
/* TODO: move setup_chromeos_gpios() here once bootblock code is in mainboard */
diff --git a/src/mainboard/google/veyron_jerry/chromeos.c b/src/mainboard/google/veyron_jerry/chromeos.c index dc224a5..68f72a0 100644 --- a/src/mainboard/google/veyron_jerry/chromeos.c +++ b/src/mainboard/google/veyron_jerry/chromeos.c @@ -25,10 +25,8 @@ #include <string.h> #include <vendorcode/google/chromeos/chromeos.h>
-#include "board.h" - #define GPIO_WP GPIO(7, A, 6) -#define GPIO_LID (board_id() > 0 ? GPIO(0, A, 6) : GPIO(7, B, 5)) +#define GPIO_LID GPIO(0, A, 6) #define GPIO_POWER GPIO(0, A, 5) #define GPIO_RECOVERY GPIO(0, B, 1)
diff --git a/src/mainboard/google/veyron_jerry/mainboard.c b/src/mainboard/google/veyron_jerry/mainboard.c index 0166796..b641fad 100644 --- a/src/mainboard/google/veyron_jerry/mainboard.c +++ b/src/mainboard/google/veyron_jerry/mainboard.c @@ -42,14 +42,6 @@ static void configure_usb(void) { gpio_output(GPIO(0, B, 3), 1); /* HOST1_PWR_EN */ gpio_output(GPIO(0, B, 4), 1); /* USBOTG_PWREN_H */ - - switch (board_id()) { - case 0: - gpio_output(GPIO(7, B, 3), 1); /* 5V_DRV */ - break; - default: - break; /* 5V_DRV moved to EC after rev1 */ - } }
static void configure_sdmmc(void) @@ -59,16 +51,8 @@ static void configure_sdmmc(void) /* use sdmmc0 io, disable JTAG function */ writel(RK_CLRBITS(1 << 12), &rk3288_grf->soc_con0);
- switch (board_id()) { - case 0: - rk808_configure_ldo(PMIC_BUS, 8, 3300); /* VCCIO_SD */ - gpio_output(GPIO(7, C, 5), 1); /* SD_EN */ - break; - default: - rk808_configure_ldo(PMIC_BUS, 4, 3300); /* VCCIO_SD */ - rk808_configure_ldo(PMIC_BUS, 5, 3300); /* VCC33_SD */ - break; - } + rk808_configure_ldo(PMIC_BUS, 4, 3300); /* VCCIO_SD */ + rk808_configure_ldo(PMIC_BUS, 5, 3300); /* VCC33_SD */
gpio_input(GPIO(7, A, 5)); /* SD_DET */ } @@ -95,14 +79,7 @@ static void configure_codec(void) writel(IOMUX_I2S, &rk3288_grf->iomux_i2s); writel(IOMUX_I2SCLK, &rk3288_grf->iomux_i2sclk);
- switch (board_id()) { - case 0: - rk808_configure_ldo(PMIC_BUS, 5, 1800); /* VCC18_CODEC */ - break; - default: - rk808_configure_ldo(PMIC_BUS, 6, 1800); /* VCC18_CODEC */ - break; - } + rk808_configure_ldo(PMIC_BUS, 6, 1800); /* VCC18_CODEC */
/* AUDIO IO domain 1.8V voltage selection */ writel(RK_SETBITS(1 << 6), &rk3288_grf->io_vsel); @@ -113,18 +90,9 @@ static void configure_lcd(void) { writel(IOMUX_LCDC, &rk3288_grf->iomux_lcdc);
- switch (board_id()) { - case 0: - rk808_configure_ldo(PMIC_BUS, 4, 1800); /* VCC18_LCD */ - rk808_configure_ldo(PMIC_BUS, 6, 1000); /* VCC10_LCD */ - gpio_output(GPIO(7, B, 7), 1); /* LCD_EN */ - break; - default: - rk808_configure_switch(PMIC_BUS, 2, 1); /* VCC18_LCD */ - rk808_configure_ldo(PMIC_BUS, 7, 3300); /* VCC10_LCD_PWREN_H */ - rk808_configure_switch(PMIC_BUS, 1, 1); /* VCC33_LCD */ - break; - } + rk808_configure_switch(PMIC_BUS, 2, 1); /* VCC18_LCD */ + rk808_configure_ldo(PMIC_BUS, 7, 3300); /* VCC10_LCD_PWREN_H */ + rk808_configure_switch(PMIC_BUS, 1, 1); /* VCC33_LCD */
gpio_output(GPIO(7, A, 0), 0); /* LCDC_BL */ gpio_output(GPIO(7, A, 2), 1); /* BL_EN */