[coreboot-gerrit] Patch merged into coreboot/master: 12b121f arm/exynos: Allow releasing UART retention for resume.

the following patch was just integrated into master:
commit 12b121f3fef61d6a346c2575266a9cb46bb9d31f
Author: Hung-Te Lin 
Date:   Tue Sep 24 15:51:05 2013 +0800

arm/exynos: Allow releasing UART retention for resume.

The UART / serial console is put in retention state by kernel during suspend /
    resume path, which caused Coreboot not able to print any messages during resume.

Sending values to the padret_uart_opt inside PMU may release UART, but that may
    also cause unexpected output when kernel is back. However, it's still very
    helpful when we are debugging suspend/resume inside Coreboot.

To get UART message on resume, call wakeup_enable_uart() in boot block or
    romstage (before console_init).

Change-Id: Ib5759cb402c6e018d9dba14fad8b61f6a1b1a265
    Reviewed-on: https://chromium-review.googlesource.com/170440
    Tested-by: Hung-Te Lin 
    Reviewed-by: Hung-Te Lin 
    Commit-Queue: Hung-Te Lin 
    (cherry picked from commit 547fbbfe2eeb6da4e161f36be2caf8099f9eac9b)
    Signed-off-by: Isaac Christensen 
    Reviewed-on: http://review.coreboot.org/6649
    Tested-by: build bot (Jenkins)
    Reviewed-by: Ronald G. Minnich

See http://review.coreboot.org/6649 for details.

-gerrit