[coreboot-gerrit] Change in ...coreboot[master]: sb/intel/lynxpoint: Don't force state keep after power fail

[Tristan Corrick (Code Review)]

Tristan Corrick has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/30101

Change subject: sb/intel/lynxpoint: Don't force state keep after power fail
......................................................................

sb/intel/lynxpoint: Don't force state keep after power fail

The deleted line crept in with commit 562db3bb3fa1 ("libpayload: find
source of input characters").

Tested on an ASRock H81M-HDS with `power_on_after_fail` set to `Disable`
via CMOS. After this patch, the system no longer powers on as soon as
power is restored after a power failure.

Change-Id: Ie9d9dab9885b285db1c5094c2c8d62aae551f1e7
Signed-off-by: Tristan Corrick 
---
M src/southbridge/intel/lynxpoint/lpc.c
1 file changed, 0 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/01/30101/1

diff --git a/src/southbridge/intel/lynxpoint/lpc.c b/src/southbridge/intel/lynxpoint/lpc.c
index d914636..f0fc22d 100644
--- a/src/southbridge/intel/lynxpoint/lpc.c
+++ b/src/southbridge/intel/lynxpoint/lpc.c
@@ -199,7 +199,6 @@
     * If the option is not existent (Laptops), use Kconfig setting.
     */
    get_option(&pwr_on, "power_on_after_fail");
-	pwr_on = MAINBOARD_POWER_KEEP;

reg16 = pci_read_config16(dev, GEN_PMCON_3);
    reg16 &= 0xfffe;