[coreboot-gerrit] Patch merged into coreboot/master: amd/sr5650: Update add_ivrs_device_entries

the following patch was just integrated into master:
commit d173907747ce9b1eea5dad0ca9de7b3166b757b7
Author: Martin Roth 
Date:   Wed Sep 7 21:22:54 2016 -0600

amd/sr5650: Update add_ivrs_device_entries

Functionally, this should be roughly the same.  The only real difference
    should be removing the 4 bytes of padding from the end of the 4 byte
    entries.  The spec mentions a boundary for the 4 byte entries (which we
    are ignoring), but doesn't mention a boundary for the 8 byte entries,
    and I can't think of any other reason that the padding might be needed.

- Wrap long lines.
    - Combine if statements to clean up indentation.
    - Use #defines from acpi_ivrs.h to make commands easier to understand.
    - Remove padding from 4 byte entries that made them 8 bytes in length.
    - Set the pointer p at init, and clear the value at p if the device
    we're looking at is enabled instead of setting p in every if statement.
    - Look at the command type to update current and length.
    - Treat malloc & free as if they were typical instead of coreboot
    specific versions.  Check to make sure the malloc worked and only
    free on the last loop instead of every time.

Change-Id: I79dd5f9e930fad22a09d1af78f33c1d9a88b3bfe
    Signed-off-by: Martin Roth 
    Reviewed-on: https://review.coreboot.org/16532
    Tested-by: build bot (Jenkins)
    Tested-by: Raptor Engineering Automated Test Stand 
    Reviewed-by: Philipp Deppenwiese

See https://review.coreboot.org/16532 for details.

-gerrit