Attention is currently required from: Fabian Groffen, Keith Hui.
Keith Hui has uploaded a new patch set (#6) to the change originally created by Fabian Groffen. ( https://review.coreboot.org/c/coreboot/+/75137?usp=email )
The following approvals got outdated and were removed: Verified+1 by build bot (Jenkins)
Change subject: mb/asus/p8z77-m: Remove settings to replicate OEM ......................................................................
mb/asus/p8z77-m: Remove settings to replicate OEM
Per Fabian:
With these settings enabled COM 1/UART A/serial port 1 gets blocked right after the kernel boots. It no longer works or responds, which actually means the Linux boot process gets stuck forever when configured to write to ttyS0.
Not using these settings, I have not found any downside. Serial keeps working, sensors still work, S3 suspend/resume works correctly.
---
Out of the six settings in this group, three are causing the initial issue, the rest are confirmed necessary to be replicated, with PECI as the reason for one of them. Keith revised this patch to reflect this.
Signed-off-by: Fabian Groffen grobian@gentoo.org Signed-off-by: Keith Hui buurin@gmail.com Change-Id: Iae526762e79e9e2d46d06e12c338f375e5555e8c --- M src/mainboard/asus/p8x7x-series/variants/p8z77-m/overridetree.cb 1 file changed, 1 insertion(+), 4 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/37/75137/6