[coreboot-gerrit] Change in coreboot[master]: siemens/mc_apl1: Set bus master bit for on-board PCI device

[Mario Scheithauer (Code Review)]

Mario Scheithauer has uploaded this change for review. ( https://review.coreboot.org/21405

Change subject: siemens/mc_apl1: Set bus master bit for on-board PCI device
......................................................................

siemens/mc_apl1: Set bus master bit for on-board PCI device

There is one on-board PCI device where bus master has to be enabled in
PCI configuration space. As there is no need for a complete PCI driver
for this device just set the bus master bit in mainboard_final().

Change-Id: I45202937eba11da3bea14fef6ebed70599804335
Signed-off-by: Mario Scheithauer 
---
M src/mainboard/siemens/mc_apl1/mainboard.c
1 file changed, 12 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/05/21405/1

diff --git a/src/mainboard/siemens/mc_apl1/mainboard.c b/src/mainboard/siemens/mc_apl1/mainboard.c
index 4c90aff..d8374fc 100644
--- a/src/mainboard/siemens/mc_apl1/mainboard.c
+++ b/src/mainboard/siemens/mc_apl1/mainboard.c
@@ -15,8 +15,9 @@
  */

#include <console/console.h>
-#include <device/pci.h>
 #include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
 #include <hwilib.h>
 #include <i210.h>
 #include <intelblocks/lpc_lib.h>
@@ -115,6 +116,8 @@
 static void mainboard_final(void *chip_info)
 {
    int status;
+	uint16_t cmd = 0;
+	device_t dev = NULL;

/**
     * Set up the DP2LVDS converter.
@@ -128,6 +131,14 @@

/* Enable additional I/O decoding range on LPC for COM 3 */
    lpc_open_pmio_window(0x3e8, 8);
+
+	/* Set Master Enable for on-board PCI device. */
+	dev = dev_find_device(PCI_VENDOR_ID_SIEMENS, 0x403f, 0);
+	if (dev) {
+		cmd = pci_read_config16(dev, PCI_COMMAND);
+		cmd |= PCI_COMMAND_MASTER;
+		pci_write_config16(dev, PCI_COMMAND, cmd);
+	}
 }

struct chip_operations mainboard_ops = {