[coreboot-gerrit] [S] Change in coreboot[master]: mb/google/myst: Update WWAN usb entry

[Eric Lai (Code Review)]

Eric Lai has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/75819?usp=email )

Change subject: mb/google/myst: Update WWAN usb entry
......................................................................

mb/google/myst: Update WWAN usb entry

USB3 is used for both typeA and WWAN based on different DB.

BUG=b:287159026
TEST=change FW config and check typeA and WWAN can work.

Signed-off-by: Eric Lai 
Change-Id: I5ad3973a9519350794a661ad00f71c0eb34edfba
---
M src/mainboard/google/myst/variants/baseboard/devicetree.cb
1 file changed, 16 insertions(+), 20 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/19/75819/1

diff --git a/src/mainboard/google/myst/variants/baseboard/devicetree.cb b/src/mainboard/google/myst/variants/baseboard/devicetree.cb
index 01a4389..173cc26 100644
--- a/src/mainboard/google/myst/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/myst/variants/baseboard/devicetree.cb
@@ -254,7 +254,21 @@
    						register "use_custom_pld" = "true"
    						register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 2))"
    						register "group" = "ACPI_PLD_GROUP(1, 2)"
-							device ref usb3_port3 on end
+							device ref usb3_port3 on
+								probe DAUGHTERBOARD DB_B
+							end
+						end
+						chip drivers/usb/acpi
+							register "desc" = ""USB3 WWAN""
+							register "type" = "UPC_TYPE_INTERNAL"
+							register "has_power_resource" = "1"
+							register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_6)"
+							register "enable_delay_ms" = "20"
+							register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_11)"
+							register "reset_off_delay_ms" = "20"
+							device ref usb3_port3 on
+								probe WWAN WWAN_FM101GL
+							end
    					end
    					chip drivers/usb/acpi
    						register "desc" = ""USB2 Type-A Port A0 (MLB)""
@@ -293,25 +307,7 @@
    				end
    			end
    		end
-			device ref xhci_1 on
-				chip drivers/usb/acpi
-					register "type" = "UPC_TYPE_HUB"
-					device ref xhci_1_root_hub on
-						chip drivers/usb/acpi
-							register "desc" = ""USB3 WWAN""
-							register "type" = "UPC_TYPE_INTERNAL"
-							register "has_power_resource" = "1"
-							register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_6)"
-							register "enable_delay_ms" = "20"
-							register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_11)"
-							register "reset_off_delay_ms" = "20"
-							device ref usb3_port7 on
-								probe WWAN WWAN_FM101GL
-							end
-						end
-					end
-				end
-			end
+			device ref xhci_1 on end
    		device ref acp on end # Audio Processor (ACP)
    		device ref mp2 on end # Sensor Fusion Hub (MP2)
    	end