[coreboot-gerrit] Change in coreboot[master]: WIP: Herobrine: Initialize Trackpad as MIXED mode

[Shelley Chen (Code Review)]

Shelley Chen has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/57065 )

Change subject: WIP: Herobrine: Initialize Trackpad as MIXED mode
......................................................................

WIP: Herobrine: Initialize Trackpad as MIXED mode

This was being initialized for GSI mode, causing the kernel to be
unhappy.

BUG=b:197005398
BRANCH=None
TEST=Boot and make sure the following messages disappeared:
    [    8.497920] geni_i2c 984000.i2c: tx dma_request_slave_channel fail

Signed-off-by: Shelley Chen 
Change-Id: Ib3a406408d049e1b30db0297dc9843024c316a0c
---
M src/mainboard/google/herobrine/mainboard.c
1 file changed, 1 insertion(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/65/57065/1

diff --git a/src/mainboard/google/herobrine/mainboard.c b/src/mainboard/google/herobrine/mainboard.c
index 23f5d0d..b4dc4a6 100644
--- a/src/mainboard/google/herobrine/mainboard.c
+++ b/src/mainboard/google/herobrine/mainboard.c
@@ -62,7 +62,7 @@
    gpi_firmware_load(QUP_0_GSI_BASE);
    gpi_firmware_load(QUP_1_GSI_BASE);

-	qupv3_se_fw_load_and_init(QUPV3_0_SE1, SE_PROTOCOL_I2C, GSI);  /* APPS I2C */
+	qupv3_se_fw_load_and_init(QUPV3_0_SE1, SE_PROTOCOL_I2C, MIXED);  /* Touch I2C */
    /*
     * When coreboot firmware disables serial output,
     * we still need to load console UART QUP FW for OS.