Vladimir Serbinenko (phcoder@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5318
-gerrit
commit 36ecd018ab39951b04001df20993bbe62ab2da69 Author: Vladimir Serbinenko phcoder@gmail.com Date: Sun Mar 2 17:31:42 2014 +0100
intel/gma: Remove MCH register declarations.
i915_reg.h re-declares some of MCH registers as seen through MCHBAR mirror. It's not currently used and we don't want any MCH registers in GFX.
Change-Id: I5fa4711fee60d64316696b7ed713013de8759b54 Signed-off-by: Vladimir Serbinenko phcoder@gmail.com --- src/drivers/intel/gma/i915_reg.h | 308 --------------------------------------- 1 file changed, 308 deletions(-)
diff --git a/src/drivers/intel/gma/i915_reg.h b/src/drivers/intel/gma/i915_reg.h index 61b909d..155df4d 100644 --- a/src/drivers/intel/gma/i915_reg.h +++ b/src/drivers/intel/gma/i915_reg.h @@ -1203,299 +1203,6 @@ */ #define MCHBAR_MIRROR_BASE 0x10000
-#define MCHBAR_MIRROR_BASE_SNB 0x140000 - -/** 915-945 and GM965 MCH register controlling DRAM channel access */ -#define DCC 0x10200 -#define DCC_ADDRESSING_MODE_SINGLE_CHANNEL (0 << 0) -#define DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC (1 << 0) -#define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED (2 << 0) -#define DCC_ADDRESSING_MODE_MASK (3 << 0) -#define DCC_CHANNEL_XOR_DISABLE (1 << 10) -#define DCC_CHANNEL_XOR_BIT_17 (1 << 9) - -/** Pineview MCH register contains DDR3 setting */ -#define CSHRDDR3CTL 0x101a8 -#define CSHRDDR3CTL_DDR3 (1 << 2) - -/** 965 MCH register controlling DRAM channel configuration */ -#define C0DRB3 0x10206 -#define C1DRB3 0x10606 - -/** snb MCH registers for reading the DRAM channel configuration */ -#define MAD_DIMM_C0 (MCHBAR_MIRROR_BASE_SNB + 0x5004) -#define MAD_DIMM_C1 (MCHBAR_MIRROR_BASE_SNB + 0x5008) -#define MAD_DIMM_C2 (MCHBAR_MIRROR_BASE_SNB + 0x500C) -#define MAD_DIMM_ECC_MASK (0x3 << 24) -#define MAD_DIMM_ECC_OFF (0x0 << 24) -#define MAD_DIMM_ECC_IO_ON_LOGIC_OFF (0x1 << 24) -#define MAD_DIMM_ECC_IO_OFF_LOGIC_ON (0x2 << 24) -#define MAD_DIMM_ECC_ON (0x3 << 24) -#define MAD_DIMM_ENH_INTERLEAVE (0x1 << 22) -#define MAD_DIMM_RANK_INTERLEAVE (0x1 << 21) -#define MAD_DIMM_B_WIDTH_X16 (0x1 << 20) /* X8 chips if unset */ -#define MAD_DIMM_A_WIDTH_X16 (0x1 << 19) /* X8 chips if unset */ -#define MAD_DIMM_B_DUAL_RANK (0x1 << 18) -#define MAD_DIMM_A_DUAL_RANK (0x1 << 17) -#define MAD_DIMM_A_SELECT (0x1 << 16) -/* DIMM sizes are in multiples of 256mb. */ -#define MAD_DIMM_B_SIZE_SHIFT 8 -#define MAD_DIMM_B_SIZE_MASK (0xff << MAD_DIMM_B_SIZE_SHIFT) -#define MAD_DIMM_A_SIZE_SHIFT 0 -#define MAD_DIMM_A_SIZE_MASK (0xff << MAD_DIMM_A_SIZE_SHIFT) - - -/* Clocking configuration register */ -#define CLKCFG 0x10c00 -#define CLKCFG_FSB_400 (5 << 0) /* hrawclk 100 */ -#define CLKCFG_FSB_533 (1 << 0) /* hrawclk 133 */ -#define CLKCFG_FSB_667 (3 << 0) /* hrawclk 166 */ -#define CLKCFG_FSB_800 (2 << 0) /* hrawclk 200 */ -#define CLKCFG_FSB_1067 (6 << 0) /* hrawclk 266 */ -#define CLKCFG_FSB_1333 (7 << 0) /* hrawclk 333 */ -/* Note, below two are guess */ -#define CLKCFG_FSB_1600 (4 << 0) /* hrawclk 400 */ -#define CLKCFG_FSB_1600_ALT (0 << 0) /* hrawclk 400 */ -#define CLKCFG_FSB_MASK (7 << 0) -#define CLKCFG_MEM_533 (1 << 4) -#define CLKCFG_MEM_667 (2 << 4) -#define CLKCFG_MEM_800 (3 << 4) -#define CLKCFG_MEM_MASK (7 << 4) - -#define TSC1 0x11001 -#define TSE (1<<0) -#define TR1 0x11006 -#define TSFS 0x11020 -#define TSFS_SLOPE_MASK 0x0000ff00 -#define TSFS_SLOPE_SHIFT 8 -#define TSFS_INTR_MASK 0x000000ff - -#define CRSTANDVID 0x11100 -#define PXVFREQ_BASE 0x11110 /* P[0-15]VIDFREQ (0x1114c) (Ironlake) */ -#define PXVFREQ_PX_MASK 0x7f000000 -#define PXVFREQ_PX_SHIFT 24 -#define VIDFREQ_BASE 0x11110 -#define VIDFREQ1 0x11110 /* VIDFREQ1-4 (0x1111c) (Cantiga) */ -#define VIDFREQ2 0x11114 -#define VIDFREQ3 0x11118 -#define VIDFREQ4 0x1111c -#define VIDFREQ_P0_MASK 0x1f000000 -#define VIDFREQ_P0_SHIFT 24 -#define VIDFREQ_P0_CSCLK_MASK 0x00f00000 -#define VIDFREQ_P0_CSCLK_SHIFT 20 -#define VIDFREQ_P0_CRCLK_MASK 0x000f0000 -#define VIDFREQ_P0_CRCLK_SHIFT 16 -#define VIDFREQ_P1_MASK 0x00001f00 -#define VIDFREQ_P1_SHIFT 8 -#define VIDFREQ_P1_CSCLK_MASK 0x000000f0 -#define VIDFREQ_P1_CSCLK_SHIFT 4 -#define VIDFREQ_P1_CRCLK_MASK 0x0000000f -#define INTTOEXT_BASE_ILK 0x11300 -#define INTTOEXT_BASE 0x11120 /* INTTOEXT1-8 (0x1113c) */ -#define INTTOEXT_MAP3_SHIFT 24 -#define INTTOEXT_MAP3_MASK (0x1f << INTTOEXT_MAP3_SHIFT) -#define INTTOEXT_MAP2_SHIFT 16 -#define INTTOEXT_MAP2_MASK (0x1f << INTTOEXT_MAP2_SHIFT) -#define INTTOEXT_MAP1_SHIFT 8 -#define INTTOEXT_MAP1_MASK (0x1f << INTTOEXT_MAP1_SHIFT) -#define INTTOEXT_MAP0_SHIFT 0 -#define INTTOEXT_MAP0_MASK (0x1f << INTTOEXT_MAP0_SHIFT) -#define MEMSWCTL 0x11170 /* Ironlake only */ -#define MEMCTL_CMD_MASK 0xe000 -#define MEMCTL_CMD_SHIFT 13 -#define MEMCTL_CMD_RCLK_OFF 0 -#define MEMCTL_CMD_RCLK_ON 1 -#define MEMCTL_CMD_CHFREQ 2 -#define MEMCTL_CMD_CHVID 3 -#define MEMCTL_CMD_VMMOFF 4 -#define MEMCTL_CMD_VMMON 5 -#define MEMCTL_CMD_STS (1<<12) /* write 1 triggers command, clears - when command complete */ -#define MEMCTL_FREQ_MASK 0x0f00 /* jitter, from 0-15 */ -#define MEMCTL_FREQ_SHIFT 8 -#define MEMCTL_SFCAVM (1<<7) -#define MEMCTL_TGT_VID_MASK 0x007f -#define MEMIHYST 0x1117c -#define MEMINTREN 0x11180 /* 16 bits */ -#define MEMINT_RSEXIT_EN (1<<8) -#define MEMINT_CX_SUPR_EN (1<<7) -#define MEMINT_CONT_BUSY_EN (1<<6) -#define MEMINT_AVG_BUSY_EN (1<<5) -#define MEMINT_EVAL_CHG_EN (1<<4) -#define MEMINT_MON_IDLE_EN (1<<3) -#define MEMINT_UP_EVAL_EN (1<<2) -#define MEMINT_DOWN_EVAL_EN (1<<1) -#define MEMINT_SW_CMD_EN (1<<0) -#define MEMINTRSTR 0x11182 /* 16 bits */ -#define MEM_RSEXIT_MASK 0xc000 -#define MEM_RSEXIT_SHIFT 14 -#define MEM_CONT_BUSY_MASK 0x3000 -#define MEM_CONT_BUSY_SHIFT 12 -#define MEM_AVG_BUSY_MASK 0x0c00 -#define MEM_AVG_BUSY_SHIFT 10 -#define MEM_EVAL_CHG_MASK 0x0300 -#define MEM_EVAL_BUSY_SHIFT 8 -#define MEM_MON_IDLE_MASK 0x00c0 -#define MEM_MON_IDLE_SHIFT 6 -#define MEM_UP_EVAL_MASK 0x0030 -#define MEM_UP_EVAL_SHIFT 4 -#define MEM_DOWN_EVAL_MASK 0x000c -#define MEM_DOWN_EVAL_SHIFT 2 -#define MEM_SW_CMD_MASK 0x0003 -#define MEM_INT_STEER_GFX 0 -#define MEM_INT_STEER_CMR 1 -#define MEM_INT_STEER_SMI 2 -#define MEM_INT_STEER_SCI 3 -#define MEMINTRSTS 0x11184 -#define MEMINT_RSEXIT (1<<7) -#define MEMINT_CONT_BUSY (1<<6) -#define MEMINT_AVG_BUSY (1<<5) -#define MEMINT_EVAL_CHG (1<<4) -#define MEMINT_MON_IDLE (1<<3) -#define MEMINT_UP_EVAL (1<<2) -#define MEMINT_DOWN_EVAL (1<<1) -#define MEMINT_SW_CMD (1<<0) -#define MEMMODECTL 0x11190 -#define MEMMODE_BOOST_EN (1<<31) -#define MEMMODE_BOOST_FREQ_MASK 0x0f000000 /* jitter for boost, 0-15 */ -#define MEMMODE_BOOST_FREQ_SHIFT 24 -#define MEMMODE_IDLE_MODE_MASK 0x00030000 -#define MEMMODE_IDLE_MODE_SHIFT 16 -#define MEMMODE_IDLE_MODE_EVAL 0 -#define MEMMODE_IDLE_MODE_CONT 1 -#define MEMMODE_HWIDLE_EN (1<<15) -#define MEMMODE_SWMODE_EN (1<<14) -#define MEMMODE_RCLK_GATE (1<<13) -#define MEMMODE_HW_UPDATE (1<<12) -#define MEMMODE_FSTART_MASK 0x00000f00 /* starting jitter, 0-15 */ -#define MEMMODE_FSTART_SHIFT 8 -#define MEMMODE_FMAX_MASK 0x000000f0 /* max jitter, 0-15 */ -#define MEMMODE_FMAX_SHIFT 4 -#define MEMMODE_FMIN_MASK 0x0000000f /* min jitter, 0-15 */ -#define RCBMAXAVG 0x1119c -#define MEMSWCTL2 0x1119e /* Cantiga only */ -#define SWMEMCMD_RENDER_OFF (0 << 13) -#define SWMEMCMD_RENDER_ON (1 << 13) -#define SWMEMCMD_SWFREQ (2 << 13) -#define SWMEMCMD_TARVID (3 << 13) -#define SWMEMCMD_VRM_OFF (4 << 13) -#define SWMEMCMD_VRM_ON (5 << 13) -#define CMDSTS (1<<12) -#define SFCAVM (1<<11) -#define SWFREQ_MASK 0x0380 /* P0-7 */ -#define SWFREQ_SHIFT 7 -#define TARVID_MASK 0x001f -#define MEMSTAT_CTG 0x111a0 -#define RCBMINAVG 0x111a0 -#define RCUPEI 0x111b0 -#define RCDNEI 0x111b4 -#define RSTDBYCTL 0x111b8 -#define RS1EN (1<<31) -#define RS2EN (1<<30) -#define RS3EN (1<<29) -#define D3RS3EN (1<<28) /* Display D3 imlies RS3 */ -#define SWPROMORSX (1<<27) /* RSx promotion timers ignored */ -#define RCWAKERW (1<<26) /* Resetwarn from PCH causes wakeup */ -#define DPRSLPVREN (1<<25) /* Fast voltage ramp enable */ -#define GFXTGHYST (1<<24) /* Hysteresis to allow trunk gating */ -#define RCX_SW_EXIT (1<<23) /* Leave RSx and prevent re-entry */ -#define RSX_STATUS_MASK (7<<20) -#define RSX_STATUS_ON (0<<20) -#define RSX_STATUS_RC1 (1<<20) -#define RSX_STATUS_RC1E (2<<20) -#define RSX_STATUS_RS1 (3<<20) -#define RSX_STATUS_RS2 (4<<20) /* aka rc6 */ -#define RSX_STATUS_RSVD (5<<20) /* deep rc6 unsupported on ilk */ -#define RSX_STATUS_RS3 (6<<20) /* rs3 unsupported on ilk */ -#define RSX_STATUS_RSVD2 (7<<20) -#define UWRCRSXE (1<<19) /* wake counter limit prevents rsx */ -#define RSCRP (1<<18) /* rs requests control on rs1/2 reqs */ -#define JRSC (1<<17) /* rsx coupled to cpu c-state */ -#define RS2INC0 (1<<16) /* allow rs2 in cpu c0 */ -#define RS1CONTSAV_MASK (3<<14) -#define RS1CONTSAV_NO_RS1 (0<<14) /* rs1 doesn't save/restore context */ -#define RS1CONTSAV_RSVD (1<<14) -#define RS1CONTSAV_SAVE_RS1 (2<<14) /* rs1 saves context */ -#define RS1CONTSAV_FULL_RS1 (3<<14) /* rs1 saves and restores context */ -#define NORMSLEXLAT_MASK (3<<12) -#define SLOW_RS123 (0<<12) -#define SLOW_RS23 (1<<12) -#define SLOW_RS3 (2<<12) -#define NORMAL_RS123 (3<<12) -#define RCMODE_TIMEOUT (1<<11) /* 0 is eval interval method */ -#define IMPROMOEN (1<<10) /* promo is immediate or delayed until next idle interval (only for timeout method above) */ -#define RCENTSYNC (1<<9) /* rs coupled to cpu c-state (3/6/7) */ -#define STATELOCK (1<<7) /* locked to rs_cstate if 0 */ -#define RS_CSTATE_MASK (3<<4) -#define RS_CSTATE_C367_RS1 (0<<4) -#define RS_CSTATE_C36_RS1_C7_RS2 (1<<4) -#define RS_CSTATE_RSVD (2<<4) -#define RS_CSTATE_C367_RS2 (3<<4) -#define REDSAVES (1<<3) /* no context save if was idle during rs0 */ -#define REDRESTORES (1<<2) /* no restore if was idle during rs0 */ -#define VIDCTL 0x111c0 -#define VIDSTS 0x111c8 -#define VIDSTART 0x111cc /* 8 bits */ -#define MEMSTAT_ILK 0x111f8 -#define MEMSTAT_VID_MASK 0x7f00 -#define MEMSTAT_VID_SHIFT 8 -#define MEMSTAT_PSTATE_MASK 0x00f8 -#define MEMSTAT_PSTATE_SHIFT 3 -#define MEMSTAT_MON_ACTV (1<<2) -#define MEMSTAT_SRC_CTL_MASK 0x0003 -#define MEMSTAT_SRC_CTL_CORE 0 -#define MEMSTAT_SRC_CTL_TRB 1 -#define MEMSTAT_SRC_CTL_THM 2 -#define MEMSTAT_SRC_CTL_STDBY 3 -#define RCPREVBSYTUPAVG 0x113b8 -#define RCPREVBSYTDNAVG 0x113bc -#define PMMISC 0x11214 -#define MCPPCE_EN (1<<0) /* enable PM_MSG from PCH->MPC */ -#define SDEW 0x1124c -#define CSIEW0 0x11250 -#define CSIEW1 0x11254 -#define CSIEW2 0x11258 -#define PEW 0x1125c -#define DEW 0x11270 -#define MCHAFE 0x112c0 -#define CSIEC 0x112e0 -#define DMIEC 0x112e4 -#define DDREC 0x112e8 -#define PEG0EC 0x112ec -#define PEG1EC 0x112f0 -#define GFXEC 0x112f4 -#define RPPREVBSYTUPAVG 0x113b8 -#define RPPREVBSYTDNAVG 0x113bc -#define ECR 0x11600 -#define ECR_GPFE (1<<31) -#define ECR_IMONE (1<<30) -#define ECR_CAP_MASK 0x0000001f /* Event range, 0-31 */ -#define OGW0 0x11608 -#define OGW1 0x1160c -#define EG0 0x11610 -#define EG1 0x11614 -#define EG2 0x11618 -#define EG3 0x1161c -#define EG4 0x11620 -#define EG5 0x11624 -#define EG6 0x11628 -#define EG7 0x1162c -#define PXW 0x11664 -#define PXWL 0x11680 -#define LCFUSE02 0x116c0 -#define LCFUSE_HIV_MASK 0x000000ff -#define CSIPLL0 0x12c10 -#define DDRMPLL1 0X12c20 -#define PEG_BAND_GAP_DATA 0x14d68 - -#define GEN6_GT_THREAD_STATUS_REG 0x13805c -#define GEN6_GT_THREAD_STATUS_CORE_MASK 0x7 -#define GEN6_GT_THREAD_STATUS_CORE_MASK_HSW (0x7 | (0x07 << 16)) - -#define GEN6_GT_PERF_STATUS 0x145948 -#define GEN6_RP_STATE_LIMITS 0x145994 -#define GEN6_RP_STATE_CAP 0x145998 - /* * Logical Context regs */ @@ -2942,21 +2649,6 @@
#define SNB_FIFO_LINE_SIZE 64
- -/* the address where we get all kinds of latency value */ -#define SSKPD 0x5d10 -#define SSKPD_WM_MASK 0x3f -#define SSKPD_WM0_SHIFT 0 -#define SSKPD_WM1_SHIFT 8 -#define SSKPD_WM2_SHIFT 16 -#define SSKPD_WM3_SHIFT 24 - -#define SNB_LATENCY(shift) (I915_READ(MCHBAR_MIRROR_BASE_SNB + SSKPD) >> (shift) & SSKPD_WM_MASK) -#define SNB_READ_WM0_LATENCY() SNB_LATENCY(SSKPD_WM0_SHIFT) -#define SNB_READ_WM1_LATENCY() SNB_LATENCY(SSKPD_WM1_SHIFT) -#define SNB_READ_WM2_LATENCY() SNB_LATENCY(SSKPD_WM2_SHIFT) -#define SNB_READ_WM3_LATENCY() SNB_LATENCY(SSKPD_WM3_SHIFT) - /* * The two pipe frame counter registers are not synchronized, so * reading a stable value is somewhat tricky. The following code