[coreboot-gerrit] Patch merged into coreboot/master: f5fcedf drivers/spi: Add support for Micron N25Q128

the following patch was just integrated into master:
commit f5fcedfbc4fe4682ac85bac49c62e59b840fb1f1
Author: Scott Radcliffe 
Date:   Tue Oct 14 15:40:59 2014 -0400

drivers/spi: Add support for Micron N25Q128

Support added for Micron N25Q128 SPI flash, which has
    the same manufacturer id as ST Micro. Jedec ID =
    0x20 0xBB 0x18. Since existing stmicro.c only compares
    the last device id byte, this flash is mistakenly
    identified as M25P128, which has ID = 0x20 0x20 0x18.

To handle this situation and avoid breaking code for
    existing devices, a two byte .id member is added.
    New devices should be added to the beginning of the
    flash table array with .idcode = STM_ID_USE_ALT_ID and
    .id = the two byte jedec device id.

A 4KB subsector erase capability is added and used for
    this new device. It requires using a different SPI
    op-code supported by adding .op_erase member. Previous
    devices defined in stmicro.c are assigned their original
    op-code for 64KB sector erase.

N25Q128 is now working on a custom designed Bayley Bay
    based board. Tested by verifying the MRC fastboot cache
    is successfully (re)written. Note that previous devices
    were not retested.

Change-Id: Ic63d86958bf8d301898a157b435f549a0dd9893c
    Signed-off-by: Scott Radcliffe 
    Reviewed-on: http://review.coreboot.org/7077
    Reviewed-by: Patrick Georgi 
    Reviewed-by: Paul Menzel 
    Tested-by: build bot (Jenkins)

See http://review.coreboot.org/7077 for details.

-gerrit