Martin Roth has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/58080 )
Change subject: src/acpi to src/lib: Fix spelling errors. ......................................................................
src/acpi to src/lib: Fix spelling errors.
These issues were found and fixed by codespell, a useful tool for finding spelling errors.
Signed-off-by: Martin Roth martin@coreboot.org Change-Id: I5b8ecdfe75d99028fee820a2034466a8ad1c5e63 --- M src/acpi/acpi.c M src/acpi/device.c M src/arch/arm/armv7/cpu.S M src/arch/arm64/include/arch/asm.h M src/arch/riscv/fit_payload.c M src/arch/riscv/opensbi.c M src/arch/x86/c_start.S M src/commonlib/bsd/include/commonlib/bsd/compiler.h M src/commonlib/include/commonlib/iobuf.h M src/console/Kconfig M src/cpu/x86/64bit/exit32.inc M src/cpu/x86/pae/pgtbl.c M src/cpu/x86/sipi_vector.S M src/device/Kconfig M src/device/azalia_device.c M src/device/dram/ddr4.c M src/device/oprom/include/x86emu/regs.h M src/device/oprom/x86emu/LICENSE M src/device/oprom/x86emu/prim_ops.c M src/device/pci_early.c M src/device/pnp_device.c M src/device/resource_allocator_v4.c M src/drivers/amd/agesa/cache_as_ram.S M src/drivers/crb/tpm.c M src/drivers/generic/gpio_keys/chip.h M src/drivers/i2c/lm96000/chip.h M src/drivers/i2c/nct7802y/chip.h M src/drivers/i2c/tpm/cr50.c M src/drivers/i2c/tpm/tpm.c M src/drivers/i2c/ww_ring/ww_ring_programs.c M src/drivers/i2c/ww_ring/ww_ring_programs.h M src/drivers/ipmi/ipmi_fru.c M src/drivers/ipmi/supermicro_oem.c M src/drivers/net/Kconfig M src/drivers/net/atl1e.c M src/drivers/net/r8168.c M src/drivers/spi/spi_sdcard.c M src/drivers/spi/tpm/tpm.c M src/ec/compal/ene932/acpi/ec.asl M src/ec/google/chromeec/ec.h M src/ec/google/chromeec/ec_commands.h M src/ec/google/wilco/commands.h M src/ec/quanta/ene_kb3940q/acpi/ec.asl M src/ec/quanta/it8518/acpi/battery.asl M src/ec/quanta/it8518/acpi/ec.asl M src/include/acpi/acpi.h M src/include/cpu/x86/save_state.h M src/include/device/i2c_simple.h M src/lib/device_tree.c M src/lib/edid.c M src/lib/nhlt.c M src/lib/region_file.c 52 files changed, 68 insertions(+), 68 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/80/58080/1
diff --git a/src/acpi/acpi.c b/src/acpi/acpi.c index 2e15ea9..6417ef8 100644 --- a/src/acpi/acpi.c +++ b/src/acpi/acpi.c @@ -1937,15 +1937,15 @@ return 2; case TPM2: return 4; - case SSDT: /* ACPI 3.0 upto 6.3: 2 */ + case SSDT: /* ACPI 3.0 up to 6.3: 2 */ return 2; - case SRAT: /* ACPI 2.0: 1, ACPI 3.0: 2, ACPI 4.0 upto 6.3: 3 */ + case SRAT: /* ACPI 2.0: 1, ACPI 3.0: 2, ACPI 4.0 up to 6.3: 3 */ return 1; /* TODO Should probably be upgraded to 2 */ case HMAT: /* ACPI 6.4: 2 */ return 2; case DMAR: return 1; - case SLIT: /* ACPI 2.0 upto 6.3: 1 */ + case SLIT: /* ACPI 2.0 up to 6.3: 1 */ return 1; case SPMI: /* IMPI 2.0 */ return 5; @@ -1957,13 +1957,13 @@ return IVRS_FORMAT_MIXED; case DBG2: return 0; - case FACS: /* ACPI 2.0/3.0: 1, ACPI 4.0 upto 6.3: 2 */ + case FACS: /* ACPI 2.0/3.0: 1, ACPI 4.0 up to 6.3: 2 */ return 1; - case RSDT: /* ACPI 1.0 upto 6.3: 1 */ + case RSDT: /* ACPI 1.0 up to 6.3: 1 */ return 1; - case XSDT: /* ACPI 2.0 upto 6.3: 1 */ + case XSDT: /* ACPI 2.0 up to 6.3: 1 */ return 1; - case RSDP: /* ACPI 2.0 upto 6.3: 2 */ + case RSDP: /* ACPI 2.0 up to 6.3: 2 */ return 2; case EINJ: return 1; diff --git a/src/acpi/device.c b/src/acpi/device.c index 4b59990..1df179b 100644 --- a/src/acpi/device.c +++ b/src/acpi/device.c @@ -139,7 +139,7 @@
/* * Warning: just as with dev_path() this uses a static buffer - * so should not be called mulitple times in one statement + * so should not be called multiple times in one statement */ const char *acpi_device_path(const struct device *dev) { diff --git a/src/arch/arm/armv7/cpu.S b/src/arch/arm/armv7/cpu.S index c53119c..bc3ebd9 100644 --- a/src/arch/arm/armv7/cpu.S +++ b/src/arch/arm/armv7/cpu.S @@ -16,7 +16,7 @@ * the LSB of the set field, but the latter contains the LSB of the way field * minus the highest valid set field... such that when you subtract it from a * [way:0:level] field you end up with a [way - 1:highest_set:level] field - * through the magic of double subtraction. It's quite ingenius, really. + * through the magic of double subtraction. It's quite ingenious, really. * Takes care to only use r0-r3 and ip so it's pefectly ABI-compatible without * needing to write to memory. * diff --git a/src/arch/arm64/include/arch/asm.h b/src/arch/arm64/include/arch/asm.h index e6246c3..df5952a 100644 --- a/src/arch/arm64/include/arch/asm.h +++ b/src/arch/arm64/include/arch/asm.h @@ -19,7 +19,7 @@ .size name, .-name
/* - * Certain SoCs have an alignment requiremnt for the CPU reset vector. + * Certain SoCs have an alignment requirement for the CPU reset vector. * Align to a 64 byte typical cacheline for now. */ #define CPU_RESET_ENTRY(name) ENTRY_WITH_ALIGN(name, 6) diff --git a/src/arch/riscv/fit_payload.c b/src/arch/riscv/fit_payload.c index abce57e..f7f4106 100644 --- a/src/arch/riscv/fit_payload.c +++ b/src/arch/riscv/fit_payload.c @@ -7,7 +7,7 @@ #include <fit.h> #include <endian.h>
-/* Implements a Berkley Boot Loader (BBL) compatible payload loading */ +/* Implements a Berkeley Boot Loader (BBL) compatible payload loading */
#define MAX_KERNEL_SIZE (64*MiB)
diff --git a/src/arch/riscv/opensbi.c b/src/arch/riscv/opensbi.c index e719560..3a738ec 100644 --- a/src/arch/riscv/opensbi.c +++ b/src/arch/riscv/opensbi.c @@ -2,7 +2,7 @@
#include <sbi/fw_dynamic.h> #include <arch/boot.h> -/* DO NOT INLCUDE COREBOOT HEADERS HERE */ +/* DO NOT INCLUDE COREBOOT HEADERS HERE */
void run_opensbi(const int hart_id, const void *fdt, diff --git a/src/arch/x86/c_start.S b/src/arch/x86/c_start.S index a4a7b28..cb7d504 100644 --- a/src/arch/x86/c_start.S +++ b/src/arch/x86/c_start.S @@ -217,7 +217,7 @@ # use iret to jump to a 64-bit offset in a new code segment # iret will pop cs:rip, flags, then ss:rsp mov %ss, %ax # need to push ss.. - push %rax # push ss instuction not valid in x64 mode, + push %rax # push ss instruction not valid in x64 mode, # so use ax push %rsp pushfq diff --git a/src/commonlib/bsd/include/commonlib/bsd/compiler.h b/src/commonlib/bsd/include/commonlib/bsd/compiler.h index ee2ff88..4dd09bc 100644 --- a/src/commonlib/bsd/include/commonlib/bsd/compiler.h +++ b/src/commonlib/bsd/include/commonlib/bsd/compiler.h @@ -36,7 +36,7 @@ #endif
/* This evaluates to the type of the first expression, unless that is constant - in which case it evalutates to the type of the second. This is useful when + in which case it evaluates to the type of the second. This is useful when assigning macro parameters to temporary variables, because that would normally circumvent the special loosened type promotion rules for integer literals. By using this macro, the promotion can happen at the time the diff --git a/src/commonlib/include/commonlib/iobuf.h b/src/commonlib/include/commonlib/iobuf.h index 472b368..0de7d3e 100644 --- a/src/commonlib/include/commonlib/iobuf.h +++ b/src/commonlib/include/commonlib/iobuf.h @@ -81,7 +81,7 @@ /* Out-of-band drain of ibuf by returning pointer to data of specified size. */ const void *ibuf_oob_drain(struct ibuf *ib, size_t sz);
-/* Read arbitray data from input buffer. */ +/* Read arbitrary data from input buffer. */ int ibuf_read(struct ibuf *ib, void *data, size_t sz);
/* Read big endian fixed size values. */ @@ -125,7 +125,7 @@ /* Fill the buffer out-of-band. The size is accounted for. */ void *obuf_oob_fill(struct obuf *ob, size_t sz);
-/* Write arbitray data to output buffer. */ +/* Write arbitrary data to output buffer. */ int obuf_write(struct obuf *ob, const void *data, size_t sz);
/* Write big endian fixed size values. */ diff --git a/src/console/Kconfig b/src/console/Kconfig index 4125e18..4c2e768 100644 --- a/src/console/Kconfig +++ b/src/console/Kconfig @@ -193,7 +193,7 @@ help Send coreboot debug output to a Ethernet console, it works same way as Linux netconsole, packets are received to UDP - port 6666 on IP/MAC specified with options bellow. + port 6666 on IP/MAC specified with options below. Use following netcat command: nc -u -l -p 6666
config CONSOLE_NE2K_DST_MAC diff --git a/src/cpu/x86/64bit/exit32.inc b/src/cpu/x86/64bit/exit32.inc index 91cccb5..4d1149e 100644 --- a/src/cpu/x86/64bit/exit32.inc +++ b/src/cpu/x86/64bit/exit32.inc @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0-only */
/* - * For droping from long mode to protected mode. + * For dropping from long mode to protected mode. * * For reference see "AMD64 ArchitectureProgrammer's Manual Volume 2", * Document 24593-Rev. 3.31-July 2019 Chapter 5.3 @@ -47,7 +47,7 @@
# use iret to jump to a 32-bit offset in a new code segment # iret will pop cs:rip, flags, then ss:rsp - mov %ss, %ax # need to push ss, but push ss instuction + mov %ss, %ax # need to push ss, but push ss instruction push %rax # not valid in x64 mode, so use ax push %rdx # the rsp to load pushfq # push rflags diff --git a/src/cpu/x86/pae/pgtbl.c b/src/cpu/x86/pae/pgtbl.c index 814dbf5..c8783d6 100644 --- a/src/cpu/x86/pae/pgtbl.c +++ b/src/cpu/x86/pae/pgtbl.c @@ -104,7 +104,7 @@ * Use PAE to map a page and then memset it with the pattern specified. * In order to use PAE pagetables for virtual addressing are set up and reloaded * on a 2MiB boundary. After the function is done, virtual addressing mode is - * disabled again. The PAT are set to all cachable, but MTRRs still apply. + * disabled again. The PAT are set to all cacheable, but MTRRs still apply. * * Requires a scratch memory for pagetables and a virtual address for * non identity mapped memory. @@ -124,7 +124,7 @@ * Content at physical address isn't preserved. * @param length The length of the memory segment to memset * @param dest Physical memory address to memset - * @param pat The pattern to write to the pyhsical memory + * @param pat The pattern to write to the physical memory * @return 0 on success, 1 on error */ int memset_pae(uint64_t dest, unsigned char pat, uint64_t length, void *pgtbl, diff --git a/src/cpu/x86/sipi_vector.S b/src/cpu/x86/sipi_vector.S index 44b772b..496fd34 100644 --- a/src/cpu/x86/sipi_vector.S +++ b/src/cpu/x86/sipi_vector.S @@ -57,7 +57,7 @@ movw %cs, %ax movw %ax, %ds
- /* The gdtaddr needs to be releative to the data segment in order + /* The gdtaddr needs to be relative to the data segment in order * to properly dereference it. The .text section comes first in an * rmodule so _start can be used as a proxy for the load address. */ movl $(gdtaddr), %ebx diff --git a/src/device/Kconfig b/src/device/Kconfig index 5ae3466..ea3e241 100644 --- a/src/device/Kconfig +++ b/src/device/Kconfig @@ -166,7 +166,7 @@ def_bool n depends on VGA_ROM_RUN && ALWAYS_LOAD_OPROM help - Always uncondtionally run the option regardless of other + Always unconditionally run the option regardless of other policies.
config ON_DEVICE_ROM_LOAD diff --git a/src/device/azalia_device.c b/src/device/azalia_device.c index 9202f72..70f8348 100644 --- a/src/device/azalia_device.c +++ b/src/device/azalia_device.c @@ -289,7 +289,7 @@ if (!res) return;
- // NOTE this will break as soon as the azalia_audio get's a bar above 4G. + // NOTE this will break as soon as the azalia_audio gets a bar above 4G. // Is there anything we can do about it? base = res2mmio(res, 0, 0); printk(BIOS_DEBUG, "azalia_audio: base = %p\n", base); diff --git a/src/device/dram/ddr4.c b/src/device/dram/ddr4.c index 83beeaf..c5a8d13 100644 --- a/src/device/dram/ddr4.c +++ b/src/device/dram/ddr4.c @@ -205,7 +205,7 @@
/* Verify CRC of blocks that have them, do not step over 'used' length */ for (int i = 0; i < ARRAY_SIZE(spd_blocks); i++) { - /* this block is not checksumed */ + /* this block is not checksummed */ if (spd_blocks[i].crc_start == 0) continue; /* we shouldn't have this block */ diff --git a/src/device/oprom/include/x86emu/regs.h b/src/device/oprom/include/x86emu/regs.h index 7640c78..52f599d 100644 --- a/src/device/oprom/include/x86emu/regs.h +++ b/src/device/oprom/include/x86emu/regs.h @@ -54,7 +54,7 @@ * EAX & 0xff === AL * EAX & 0xffff == AX * - * etc. The result is that alot of the calculations can then be + * etc. The result is that a lot of the calculations can then be * done using the native instruction set fully. */
diff --git a/src/device/oprom/x86emu/LICENSE b/src/device/oprom/x86emu/LICENSE index f13d418..f1c26cc 100644 --- a/src/device/oprom/x86emu/LICENSE +++ b/src/device/oprom/x86emu/LICENSE @@ -1,7 +1,7 @@ License information -------------------
-The x86emu library is under a BSD style license, comaptible +The x86emu library is under a BSD style license, compatible with the XFree86 and X licenses used by XFree86. The original x86emu libraries were under the GNU General Public License. Due to license incompatibilities between the GPL diff --git a/src/device/oprom/x86emu/prim_ops.c b/src/device/oprom/x86emu/prim_ops.c index d794ecb..2350ac1 100644 --- a/src/device/oprom/x86emu/prim_ops.c +++ b/src/device/oprom/x86emu/prim_ops.c @@ -2458,7 +2458,7 @@ switch (feature) { case 0: /* Regardless if we have real data from the hardware, the emulator - * will only support upto feature 1, which we set in register EAX. + * will only support up to feature 1, which we set in register EAX. * Registers EBX:EDX:ECX contain a string identifying the CPU. */ M.x86.R_EAX = 1; diff --git a/src/device/pci_early.c b/src/device/pci_early.c index 3a4d2e0..590b170 100644 --- a/src/device/pci_early.c +++ b/src/device/pci_early.c @@ -104,7 +104,7 @@ }
/* FIXME: A lot of issues using the following, please avoid. - * Assumes 256 PCI busses, scans them all even when PCI bridges are still + * Assumes 256 PCI buses, scans them all even when PCI bridges are still * disabled. Probes all functions even if 0 is not present. */ pci_devfn_t pci_locate_device(unsigned int pci_id, pci_devfn_t dev) diff --git a/src/device/pnp_device.c b/src/device/pnp_device.c index 699007d..88072b9 100644 --- a/src/device/pnp_device.c +++ b/src/device/pnp_device.c @@ -238,7 +238,7 @@ resource->limit = (1 << (bit + 1)) - 1;
/* The block of ones in the mask is expected to be continuous. - If there is any zero inbetween the block of ones, it is ignored + If there is any zero in between the block of ones, it is ignored in the calculation of the resource size and limit. */ if (mask != (resource->limit ^ (resource->size - 1))) printk(BIOS_WARNING, diff --git a/src/device/resource_allocator_v4.c b/src/device/resource_allocator_v4.c index b94c295..6f8159e 100644 --- a/src/device/resource_allocator_v4.c +++ b/src/device/resource_allocator_v4.c @@ -637,7 +637,7 @@ * order to accomplish best fit for the resources, a list of ranges is maintained by each * resource type (i/o and mem). Domain does not differentiate between mem and prefmem. Since * they are allocated space from the same window, the resource allocator at the domain level - * ensures that the biggest requirement is selected indepedent of the prefetch type. Once the + * ensures that the biggest requirement is selected independent of the prefetch type. Once the * resource allocation for all immediate downstream devices is complete at the domain level, * resource allocator walks down the subtree for each downstream bridge to continue the * allocation process at the bridge level. Since bridges have separate windows for i/o, mem and diff --git a/src/drivers/amd/agesa/cache_as_ram.S b/src/drivers/amd/agesa/cache_as_ram.S index 1e15eda..0d678d1 100644 --- a/src/drivers/amd/agesa/cache_as_ram.S +++ b/src/drivers/amd/agesa/cache_as_ram.S @@ -5,7 +5,7 @@ * * $Workfile:: cache_as_ram.S * - * Description: cache_as_ram.S - AGESA Module Entry Point for GCC complier + * Description: cache_as_ram.S - AGESA Module Entry Point for GCC compiler * ****************************************************************************** */ diff --git a/src/drivers/crb/tpm.c b/src/drivers/crb/tpm.c index fcefe96..9c8f249 100644 --- a/src/drivers/crb/tpm.c +++ b/src/drivers/crb/tpm.c @@ -6,7 +6,7 @@ * * TPM starts in IDLE Mode * - * IDLE --> READY --> Command Receiption + * IDLE --> READY --> Command Reception * ^ | * | v -- Cmd Complete <-- Command Execution diff --git a/src/drivers/generic/gpio_keys/chip.h b/src/drivers/generic/gpio_keys/chip.h index 88dfe2e..01f4a12 100644 --- a/src/drivers/generic/gpio_keys/chip.h +++ b/src/drivers/generic/gpio_keys/chip.h @@ -81,7 +81,7 @@ struct acpi_gpio gpio; /* Is this a polled GPIO button? - Optional */ bool is_polled; - /* Poll inverval - Mandatory only if GPIO is polled. */ + /* Poll interval - Mandatory only if GPIO is polled. */ uint32_t poll_interval; /* Details about the key - Mandatory */ struct key_info key; diff --git a/src/drivers/i2c/lm96000/chip.h b/src/drivers/i2c/lm96000/chip.h index 128d1ec..bb86f4e 100644 --- a/src/drivers/i2c/lm96000/chip.h +++ b/src/drivers/i2c/lm96000/chip.h @@ -90,7 +90,7 @@ enum { /* turn fan off below `low_temp - hysteresis` */ LM96000_LOW_TEMP_OFF = 0, - /* keep PWM at mininum duty cycle */ + /* keep PWM at minimum duty cycle */ LM96000_LOW_TEMP_MIN = 1, } min_off; u8 hysteresis; diff --git a/src/drivers/i2c/nct7802y/chip.h b/src/drivers/i2c/nct7802y/chip.h index 03c464a..c4a767d 100644 --- a/src/drivers/i2c/nct7802y/chip.h +++ b/src/drivers/i2c/nct7802y/chip.h @@ -37,7 +37,7 @@
enum nct7802y_fan_smartmode { SMART_FAN_DUTY = 0, /* Target values given in duty cycle %. */ - SMART_FAN_RPM, /* Target valuse given in RPM. */ + SMART_FAN_RPM, /* Target values given in RPM. */ };
enum nct7802y_fan_speed { diff --git a/src/drivers/i2c/tpm/cr50.c b/src/drivers/i2c/tpm/cr50.c index 8e12d1f..a8a310f 100644 --- a/src/drivers/i2c/tpm/cr50.c +++ b/src/drivers/i2c/tpm/cr50.c @@ -3,7 +3,7 @@ /* Based on Linux Kernel TPM driver */
/* - * cr50 is a TPM 2.0 capable device that requries special + * cr50 is a TPM 2.0 capable device that requires special * handling for the I2C interface. * * - Use an interrupt for transaction status instead of hardcoded delays diff --git a/src/drivers/i2c/tpm/tpm.c b/src/drivers/i2c/tpm/tpm.c index ee23ea7..b96099c 100644 --- a/src/drivers/i2c/tpm/tpm.c +++ b/src/drivers/i2c/tpm/tpm.c @@ -35,7 +35,7 @@
/* max. number of iterations after I2C NAK for 'long' commands * we need this especially for sending TPM_READY, since the cleanup after the - * transtion to the ready state may take some time, but it is unpredictable + * transition to the ready state may take some time, but it is unpredictable * how long it will take. */ #define MAX_COUNT_LONG 50 diff --git a/src/drivers/i2c/ww_ring/ww_ring_programs.c b/src/drivers/i2c/ww_ring/ww_ring_programs.c index 7576a3b..73dd4da 100644 --- a/src/drivers/i2c/ww_ring/ww_ring_programs.c +++ b/src/drivers/i2c/ww_ring/ww_ring_programs.c @@ -91,7 +91,7 @@ * * When solid patterns are deployed with instanteneous color intensity * changes, all three LEDs can be controlled by one engine in sequential - * accesses. But the controllers still neeed to be synchronized. + * accesses. But the controllers still need to be synchronized. * * The maximum timer duration of lp55231 is .48 seconds. To achieve longer * blinking intervals the loops delays are deployed. Only the first controller diff --git a/src/drivers/i2c/ww_ring/ww_ring_programs.h b/src/drivers/i2c/ww_ring/ww_ring_programs.h index 4f93651..47d1c77 100644 --- a/src/drivers/i2c/ww_ring/ww_ring_programs.h +++ b/src/drivers/i2c/ww_ring/ww_ring_programs.h @@ -21,7 +21,7 @@ #include <stdint.h> #include "drivers/i2c/ww_ring/ww_ring.h"
-/* There are threee independent engines/cores in the controller. */ +/* There are three independent engines/cores in the controller. */ #define LP55231_NUM_OF_ENGINES 3
/* Number of lp55321 controllers on the ring */ @@ -29,7 +29,7 @@
/* * Structure to describe an lp55231 program: pointer to the text of the - * program, its size and load address (load addr + size sould not exceed + * program, its size and load address (load addr + size should not exceed * LP55231_MAX_PROG_SIZE), and start addresses for all of the three * engines. */ diff --git a/src/drivers/ipmi/ipmi_fru.c b/src/drivers/ipmi/ipmi_fru.c index 976df1c..31ac6c0 100644 --- a/src/drivers/ipmi/ipmi_fru.c +++ b/src/drivers/ipmi/ipmi_fru.c @@ -525,7 +525,7 @@ if (prod_info.product_name != NULL) printk(BIOS_DEBUG, "product name: %s\n", prod_info.product_name); if (prod_info.product_partnumber != NULL) - printk(BIOS_DEBUG, "product part numer: %s\n", prod_info.product_partnumber); + printk(BIOS_DEBUG, "product part number: %s\n", prod_info.product_partnumber); if (prod_info.product_version != NULL) printk(BIOS_DEBUG, "product version: %s\n", prod_info.product_version); if (prod_info.serial_number != NULL) diff --git a/src/drivers/ipmi/supermicro_oem.c b/src/drivers/ipmi/supermicro_oem.c index 87b7fe2..9d5ffc7 100644 --- a/src/drivers/ipmi/supermicro_oem.c +++ b/src/drivers/ipmi/supermicro_oem.c @@ -26,7 +26,7 @@ int ret; size_t i;
- /* Only 8 charactars are visible in UI. Cut of on first dash */ + /* Only 8 characters are visible in UI. Cut of on first dash */ for (i = 0; i < 15; i++) { if (coreboot_ver[i] == '-') break; diff --git a/src/drivers/net/Kconfig b/src/drivers/net/Kconfig index 282075b..7e111f6 100644 --- a/src/drivers/net/Kconfig +++ b/src/drivers/net/Kconfig @@ -33,7 +33,7 @@ select REALTEK_8168_RESET help This is to set a customized LED mode to distinguish 10/100/1000 - link and speed status with limited LEDs avaiable on a board. + link and speed status with limited LEDs available on a board. Please refer to RTL811x datasheet section 7.2 Customizable LED Configuration for details. With this flag enabled, the customized_leds variable will be read from devicetree setting. diff --git a/src/drivers/net/atl1e.c b/src/drivers/net/atl1e.c index 9b1b2ab..97ad140 100644 --- a/src/drivers/net/atl1e.c +++ b/src/drivers/net/atl1e.c @@ -127,7 +127,7 @@
/* Check if the base is invalid */ if (!mem_base) { - printk(BIOS_ERR, "atl1e: Error cant find MEM resource\n"); + printk(BIOS_ERR, "atl1e: Error can't find MEM resource\n"); return; } /* Enable but do not set bus master */ diff --git a/src/drivers/net/r8168.c b/src/drivers/net/r8168.c index 398b15d..1fd6edd 100644 --- a/src/drivers/net/r8168.c +++ b/src/drivers/net/r8168.c @@ -280,7 +280,7 @@
/* Check if the base is invalid */ if (!io_base) { - printk(BIOS_ERR, "r8168: Error cant find IO resource\n"); + printk(BIOS_ERR, "r8168: Error can't find IO resource\n"); return; } /* Enable but do not set bus master */ diff --git a/src/drivers/spi/spi_sdcard.c b/src/drivers/spi/spi_sdcard.c index a670111..0a18953 100644 --- a/src/drivers/spi/spi_sdcard.c +++ b/src/drivers/spi/spi_sdcard.c @@ -683,7 +683,7 @@ spi_sdcard_sendbyte(card, 0xff & (c >> 8)); spi_sdcard_sendbyte(card, 0xff & (c >> 0));
- /* recevie and verify data response token */ + /* receive and verify data response token */ c = spi_sdcard_recvbyte(card); if ((c & CT_RESPONSE_MASK) != CT_RESPONSE_ACCEPTED) { spi_sdcard_disable_cs(card); @@ -742,7 +742,7 @@ spi_sdcard_sendbyte(card, 0xff & (c >> 8)); spi_sdcard_sendbyte(card, 0xff & (c >> 0));
- /* recevie and verify data response token */ + /* receive and verify data response token */ c = spi_sdcard_recvbyte(card); if ((c & CT_RESPONSE_MASK) != CT_RESPONSE_ACCEPTED) break; diff --git a/src/drivers/spi/tpm/tpm.c b/src/drivers/spi/tpm/tpm.c index 1ad1eaa..30b1876 100644 --- a/src/drivers/spi/tpm/tpm.c +++ b/src/drivers/spi/tpm/tpm.c @@ -3,7 +3,7 @@ * * It assumes that the required SPI interface has been initialized before the * driver is started. A 'sruct spi_slave' pointer passed at initialization is - * used to direct traffic to the correct SPI interface. This dirver does not + * used to direct traffic to the correct SPI interface. This driver does not * provide a way to instantiate multiple TPM devices. Also, to keep things * simple, the driver unconditionally uses of TPM locality zero. * @@ -159,7 +159,7 @@
/* * The first byte of the frame header encodes the transaction type - * (read or write) and transfer size (set to lentgh - 1), limited to + * (read or write) and transfer size (set to length - 1), limited to * 64 bytes. */ header.body[0] = (read_write ? 0x80 : 0) | 0x40 | (bytes - 1); @@ -188,7 +188,7 @@ * the last clock of the byte) is set to 1. * * Due to some SPI controllers' shortcomings (Rockchip comes to - * mind...) we trasmit the 4 byte header without checking the byte + * mind...) we transmit the 4 byte header without checking the byte * transmitted by the TPM during the transaction's last byte. * * We know that cr50 is guaranteed to set the flow control bit to 0 diff --git a/src/ec/compal/ene932/acpi/ec.asl b/src/ec/compal/ene932/acpi/ec.asl index f3fb997..3242cce 100644 --- a/src/ec/compal/ene932/acpi/ec.asl +++ b/src/ec/compal/ene932/acpi/ec.asl @@ -118,7 +118,7 @@ SWTO, 1, // SW Throttling (1=Active) ; AEh.6 TTHR, 1, // HW (THRM#) Throttling (1=Active) ; AEh.7 TTHM, 1, // TS_THERMAL(1:Throttling for thermal) ; AFh.0 - THTL, 1, // THROTTLING(1:Ctrl H/W throtting act) ; AFh.1 + THTL, 1, // THROTTLING(1:Ctrl H/W throttling act); AFh.1 , 2, // Reserved ; AFh.2-3 NPST, 4, // Number of P-State level ; AFh.4-7 CTMP, 8, // Current CPU Temperature ; B0h diff --git a/src/ec/google/chromeec/ec.h b/src/ec/google/chromeec/ec.h index ed9f4e4..743651b 100644 --- a/src/ec/google/chromeec/ec.h +++ b/src/ec/google/chromeec/ec.h @@ -161,7 +161,7 @@ crosec_io_t crosec_io, void *context);
/** - * Performs light verification of the EC<->AP communcation channel. + * Performs light verification of the EC<->AP communication channel. * * @return 0 on success, -1 on error */ @@ -330,7 +330,7 @@ * Get role-based capabilities for a USB-PD port * * @param port Which port to get information about - * @param *power_role_cap The power-role capabillity of the port + * @param *power_role_cap The power-role capability of the port * @param *try_power_role_cap The Try-power-role capability of the port * @param *data_role_cap The data role capability of the port * @param *port_location Location of the port on the device diff --git a/src/ec/google/chromeec/ec_commands.h b/src/ec/google/chromeec/ec_commands.h index e8b028f..5fb4596 100644 --- a/src/ec/google/chromeec/ec_commands.h +++ b/src/ec/google/chromeec/ec_commands.h @@ -2856,7 +2856,7 @@ */ struct __ec_todo_unpacked { /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. - * kb_wake_angle: angle to wakup AP. + * kb_wake_angle: angle to wakeup AP. */ int16_t data; } kb_wake_angle; diff --git a/src/ec/google/wilco/commands.h b/src/ec/google/wilco/commands.h index a216345..b70f949 100644 --- a/src/ec/google/wilco/commands.h +++ b/src/ec/google/wilco/commands.h @@ -10,7 +10,7 @@ KB_POWER_SMI = 0x04, /* Read but do not clear power state information */ KB_POWER_STATUS = 0x05, - /* Inform the EC aboout the reason host is turning off */ + /* Inform the EC about the reason host is turning off */ KB_POWER_OFF = 0x08, /* Control wireless radios */ KB_RADIO_CONTROL = 0x2b, diff --git a/src/ec/quanta/ene_kb3940q/acpi/ec.asl b/src/ec/quanta/ene_kb3940q/acpi/ec.asl index 9d8cc28..a14c737 100644 --- a/src/ec/quanta/ene_kb3940q/acpi/ec.asl +++ b/src/ec/quanta/ene_kb3940q/acpi/ec.asl @@ -75,7 +75,7 @@ KBID, 1, // 0=EN KBD, 1=JP KBD ; 80h.1 , 6, // Reserved ; 80h.2-7 NPST, 8, // Number of P-State level ; 81h - MPST, 8, // Maxumum P-State ; 82h + MPST, 8, // Maximum P-State ; 82h KWAK, 1, // Keyboard WAKE(0=Disable,1=Enable) ; 83h.0 TWAK, 1, // TouchPad WAKE(0=Disable,1=Enable) ; 83h.1 , 1, // Reserved ; 83h.2 diff --git a/src/ec/quanta/it8518/acpi/battery.asl b/src/ec/quanta/it8518/acpi/battery.asl index 79a1da3..768f2b1 100644 --- a/src/ec/quanta/it8518/acpi/battery.asl +++ b/src/ec/quanta/it8518/acpi/battery.asl @@ -23,7 +23,7 @@ 0, // 0: Power Unit 0xFFFFFFFF, // 1: Design Capacity 0xFFFFFFFF, // 2: Last Full Charge Capacity - 1, // 3: Battery Technology(Rechargable) + 1, // 3: Battery Technology(Rechargeable) 10800, // 4: Design Voltage 10.8V 0, // 5: Design capacity of warning 0, // 6: Design capacity of low diff --git a/src/ec/quanta/it8518/acpi/ec.asl b/src/ec/quanta/it8518/acpi/ec.asl index 093593c..36f966f 100644 --- a/src/ec/quanta/it8518/acpi/ec.asl +++ b/src/ec/quanta/it8518/acpi/ec.asl @@ -444,7 +444,7 @@ MBTH, 4, // bit 3-0: battery 0 highest level SBTH, 4, // bit 7-4: battery 1 highest level // note: if highest level is 0 or 0xF, it means not defined - // (in this case, use default hightest level, it is 6) + // (in this case, use default highest level, it is 6)
Offset(0xEF), // [EC Function Specification Major Version] Offset(0xF0), // [Build ID]~ offset:0F7h diff --git a/src/include/acpi/acpi.h b/src/include/acpi/acpi.h index 01d10c2..2c9af3a 100644 --- a/src/include/acpi/acpi.h +++ b/src/include/acpi/acpi.h @@ -1267,7 +1267,7 @@ * proximimity domain for the memory. */ int acpi_create_hmat_mpda(acpi_hmat_mpda_t *mpda, u32 initiator, u32 memory); -/* Create Heterogenous Memory Attribute Table */ +/* Create Heterogeneous Memory Attribute Table */ void acpi_create_hmat(acpi_hmat_t *hmat, unsigned long (*acpi_fill_hmat)(unsigned long current));
diff --git a/src/include/cpu/x86/save_state.h b/src/include/cpu/x86/save_state.h index d6fcf63..139a5fa 100644 --- a/src/include/cpu/x86/save_state.h +++ b/src/include/cpu/x86/save_state.h @@ -26,7 +26,7 @@
/* Return -1 on failure, otherwise returns which CPU node issued an APMC IO write */ int get_apmc_node(u8 cmd); -/* Return -1 on failure, 0 on succes. +/* Return -1 on failure, 0 on success. Accessors for the SMM save state CPU registers RAX, RBX, RCX and RDX */ int get_save_state_reg(const enum cpu_reg reg, const int node, void *out, const uint8_t length); int set_save_state_reg(const enum cpu_reg reg, const int node, void *in, const uint8_t length); diff --git a/src/include/device/i2c_simple.h b/src/include/device/i2c_simple.h index de1c0eb..8f389b3 100644 --- a/src/include/device/i2c_simple.h +++ b/src/include/device/i2c_simple.h @@ -35,7 +35,7 @@
/* * software_i2c is supposed to be a debug feature. It's usually not compiled in, - * but when it is it can be dynamically enabled at runtime for certain busses. + * but when it is it can be dynamically enabled at runtime for certain buses. * Need this ugly stub to arbitrate since I2C device drivers hardcode * 'i2c_transfer()' as their entry point. */ diff --git a/src/lib/device_tree.c b/src/lib/device_tree.c index 1fd8874..3821e5c 100644 --- a/src/lib/device_tree.c +++ b/src/lib/device_tree.c @@ -758,7 +758,7 @@ }
/* - * Find the next compatible child of a given parent. All children upto the + * Find the next compatible child of a given parent. All children up to the * child passed in by caller are ignored. If child is NULL, it considers all the * children to find the first child which is compatible. * diff --git a/src/lib/edid.c b/src/lib/edid.c index cd7a47a..55876e8 100644 --- a/src/lib/edid.c +++ b/src/lib/edid.c @@ -433,7 +433,7 @@
/* * Slightly weird to return a global, but I've never - * seen any EDID block wth two range descriptors, so + * seen any EDID block with two range descriptors, so * it's harmless. */ return 1; @@ -481,7 +481,7 @@ We have no samples between those values, so put a threshold at 95000 kHz. If we get anything over 95000 kHz with single channel, we can make this - more sofisticated but it's currently not needed. + more sophisticated but it's currently not needed. */ out->mode.lvds_dual_channel = (out->mode.pixel_clock >= 95000); extra_info.x_mm = (x[12] + ((x[14] & 0xF0) << 4)); @@ -1094,7 +1094,7 @@ }
/* - * Given a raw edid bloc, decode it into a form + * Given a raw edid block, decode it into a form * that other parts of coreboot can use -- mainly * graphics bringup functions. The raw block is * required to be 128 bytes long, per the standard, diff --git a/src/lib/nhlt.c b/src/lib/nhlt.c index 90a6cd9..a061b82 100644 --- a/src/lib/nhlt.c +++ b/src/lib/nhlt.c @@ -126,7 +126,7 @@ wave->channel_mask = speaker_mask; memcpy(&wave->sub_format, &pcm_subformat, sizeof(wave->sub_format));
- /* Calculate the dervied fields. */ + /* Calculate the derived fields. */ wave->block_align = wave->num_channels * wave->bits_per_sample / 8; wave->bytes_per_second = wave->block_align * wave->samples_per_second;
diff --git a/src/lib/region_file.c b/src/lib/region_file.c index 4fe91b6..f3e66bf 100644 --- a/src/lib/region_file.c +++ b/src/lib/region_file.c @@ -9,7 +9,7 @@ * A region file provides generic support for appending new data * within a storage region. The book keeping is tracked in metadata * blocks where an offset pointer points to the last byte of a newly - * allocated byte sequence. Thus, by taking 2 block offets one can + * allocated byte sequence. Thus, by taking 2 block offsets one can * determine start and size of the latest update. The data does not * have to be the same consistent size, but the data size has be small * enough to fit a metadata block and one data write within the region.