Stefan Reinauer (stefan.reinauer@coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4189
-gerrit
commit 2302beb8c7b4389ee1bc034b0c3c14a7622dad02 Author: Duncan Laurie dlaurie@chromium.org Date: Fri May 24 11:10:31 2013 -0700
lynxpoint: Add ACPI Method to enable GPIO as wake source
This is an LPT-LP specific method that will enable a specific GPIO as an ACPI SCI wake source.
It can be used by a device _DSW method to enable a pin that is otherwise not configured to generate SCI at runtime.
It will set: - GPIO owner to ACPI - GPIO route to SCI - GPIO config to GPIO, Input, Inverted
Also clean up and remove ACPI field definitions that are unused and/or incorrect.
Change-Id: I14acc2de50e6200f61c2898a7bd1252400e0f0be Signed-off-by: Duncan Laurie dlaurie@chromium.org Reviewed-on: https://gerrit.chromium.org/gerrit/56621 Reviewed-by: Aaron Durbin adurbin@chromium.org --- src/southbridge/intel/lynxpoint/acpi/lpc.asl | 20 +-- src/southbridge/intel/lynxpoint/acpi/lpt_lp.asl | 94 +++++++++++++ src/southbridge/intel/lynxpoint/acpi/pch.asl | 168 +----------------------- 3 files changed, 97 insertions(+), 185 deletions(-)
diff --git a/src/southbridge/intel/lynxpoint/acpi/lpc.asl b/src/southbridge/intel/lynxpoint/acpi/lpc.asl index 7e26926..07b3fcf 100644 --- a/src/southbridge/intel/lynxpoint/acpi/lpc.asl +++ b/src/southbridge/intel/lynxpoint/acpi/lpc.asl @@ -32,6 +32,8 @@ Device (LPCB) DIDH, 8, // Device ID High Byte Offset (0x40), PMBS, 16, // PMBASE + Offset (0x48), + GPBS, 16, // GPIOBASE Offset (0x60), // Interrupt Routing Registers PRTA, 8, PRTB, 8, @@ -47,24 +49,6 @@ Device (LPCB) IOD0, 8, IOD1, 8,
- Offset (0xb8), // GPIO Routing Control - GR00, 2, - GR01, 2, - GR02, 2, - GR03, 2, - GR04, 2, - GR05, 2, - GR06, 2, - GR07, 2, - GR08, 2, - GR09, 2, - GR10, 2, - GR11, 2, - GR12, 2, - GR13, 2, - GR14, 2, - GR15, 2, - Offset (0xf0), // RCBA RCEN, 1, , 13, diff --git a/src/southbridge/intel/lynxpoint/acpi/lpt_lp.asl b/src/southbridge/intel/lynxpoint/acpi/lpt_lp.asl new file mode 100644 index 0000000..fd64cb8 --- /dev/null +++ b/src/southbridge/intel/lynxpoint/acpi/lpt_lp.asl @@ -0,0 +1,94 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* LynxPoint-H */ + +Scope (_SB.PCI0.LPCB) +{ + // GWAK: Setup GPIO as ACPI GPE for Wake + // Arg0: GPIO Number + Method (GWAK, 1, NotSerialized) + { + // Local0 = GPIO Base Address + Store (And (GPBS, Not(0x1)), Local0) + + // Local1 = BANK, Local2 = OFFSET + Divide (Arg0, 32, Local2, Local1) + + // + // Set OWNER to ACPI + // + + // Local3 = GPIOBASE + GPIO_OWN(BANK) + Store (Add (Local0, Multiply (Local1, 0x4)), Local3) + + // GPIO_OWN(BANK) + OperationRegion (IOWN, SystemIO, Local3, 4) + Field (IOWN, AnyAcc, NoLock, Preserve) { + GOWN, 32, + } + + // GPIO_OWN[GPIO] = 0 (ACPI) + Store (And (GOWN, Not (ShiftLeft (0x1, Local2))), GOWN) + + // + // Set ROUTE to SCI + // + + // Local3 = GPIOBASE + GPIO_ROUTE(BANK) + Store (Add (Add (Local0, 0x30), Multiply (Local1, 0x4)), Local3) + + // GPIO_ROUTE(BANK) + OperationRegion (IROU, SystemIO, Local3, 4) + Field (IROU, AnyAcc, NoLock, Preserve) { + GROU, 32, + } + + // GPIO_ROUTE[GPIO] = 0 (SCI) + Store (And (GROU, Not (ShiftLeft (0x1, Local2))), GROU) + + // + // Set GPnCONFIG to GPIO|INPUT|INVERT + // + + // Local3 = GPIOBASE + GPnCONFIG0(GPIO) + Store (Add (Add (Local0, 0x100), Multiply (Arg0, 0x8)), Local3) + + // GPnCONFIG(GPIO) + OperationRegion (GPNC, SystemIO, Local3, 8) + Field (GPNC, AnyAcc, NoLock, Preserve) { + GMOD, 1, // MODE: 0=NATIVE 1=GPIO + , 1, + GIOS, 1, // IO_SEL: 0=OUTPUT 1=INPUT + GINV, 1, // INVERT: 0=NORMAL 1=INVERT + GLES, 1, // LxEB: 0=EDGE 1=LEVEL + , 24, + ILVL, 1, // INPUT: 0=LOW 1=HIGH + OLVL, 1, // OUTPUT: 0=LOW 1=HIGH + GPWP, 2, // PULLUP: 00=NONE 01=DOWN 10=UP 11=INVALID + ISEN, 1, // SENSE: 0=ENABLE 1=DISABLE + } + + Store (0x1, GMOD) // GPIO + Store (0x1, GIOS) // INPUT + Store (0x1, GINV) // INVERT + } +} \ No newline at end of file diff --git a/src/southbridge/intel/lynxpoint/acpi/pch.asl b/src/southbridge/intel/lynxpoint/acpi/pch.asl index f5cf6ae..8ac55eb 100644 --- a/src/southbridge/intel/lynxpoint/acpi/pch.asl +++ b/src/southbridge/intel/lynxpoint/acpi/pch.asl @@ -42,173 +42,6 @@ Scope() TRP0, 8 // IO-Trap at 0x808 }
- // PCH Power Management Registers, located at PMBASE (0x1f.0 0x40.l) - OperationRegion(PMIO, SystemIO, DEFAULT_PMBASE, 0xff) - Field(PMIO, ByteAcc, NoLock, Preserve) - { - Offset(0x20), // GPE0_STS - , 16, - GS00, 1, // GPIO00 SCI/Wake Status - GS01, 1, // GPIO01 SCI/Wake Status - GS02, 1, // GPIO02 SCI/Wake Status - GS03, 1, // GPIO03 SCI/Wake Status - GS04, 1, // GPIO04 SCI/Wake Status - GS05, 1, // GPIO05 SCI/Wake Status - GS06, 1, // GPIO06 SCI/Wake Status - GS07, 1, // GPIO07 SCI/Wake Status - GS08, 1, // GPIO08 SCI/Wake Status - GS09, 1, // GPIO09 SCI/Wake Status - GS10, 1, // GPIO10 SCI/Wake Status - GS11, 1, // GPIO11 SCI/Wake Status - GS12, 1, // GPIO12 SCI/Wake Status - GS13, 1, // GPIO13 SCI/Wake Status - GS14, 1, // GPIO14 SCI/Wake Status - GS15, 1, // GPIO15 SCI/Wake Status - Offset(0x28), // GPE0_EN - , 16, - GE00, 1, // GPIO00 SCI/Wake Enable - GE01, 1, // GPIO01 SCI/Wake Enable - GE02, 1, // GPIO02 SCI/Wake Enable - GE03, 1, // GPIO03 SCI/Wake Enable - GE04, 1, // GPIO04 SCI/Wake Enable - GE05, 1, // GPIO05 SCI/Wake Enable - GE06, 1, // GPIO06 SCI/Wake Enable - GE07, 1, // GPIO07 SCI/Wake Enable - GE08, 1, // GPIO08 SCI/Wake Enable - GE09, 1, // GPIO09 SCI/Wake Enable - GE10, 1, // GPIO10 SCI/Wake Enable - GE11, 1, // GPIO11 SCI/Wake Enable - GE12, 1, // GPIO12 SCI/Wake Enable - GE13, 1, // GPIO13 SCI/Wake Enable - GE14, 1, // GPIO14 SCI/Wake Enable - GE15, 1, // GPIO15 SCI/Wake Enable - Offset(0x42), // General Purpose Control - , 1, // skip 1 bit - GPEC, 1, // SWGPE_CTRL - } - - // GPIO IO mapped registers (0x1f.0 reg 0x48.l) - OperationRegion(GPIO, SystemIO, DEFAULT_GPIOBASE, 0x6c) - Field(GPIO, ByteAcc, NoLock, Preserve) - { - Offset(0x00), // GPIO Use Select - GU00, 8, - GU01, 8, - GU02, 8, - GU03, 8, - Offset(0x04), // GPIO IO Select - GIO0, 8, - GIO1, 8, - GIO2, 8, - GIO3, 8, - Offset(0x0c), // GPIO Level - GL00, 1, - GP01, 1, - GP02, 1, - GP0e, 1, - GP04, 1, - GP05, 1, - GP06, 1, - GP07, 1, - GP08, 1, - GP09, 1, - GP10, 1, - GP11, 1, - GP12, 1, - GP13, 1, - GP14, 1, - GP15, 1, - GP16, 1, - GP17, 1, - GP18, 1, - GP19, 1, - GP20, 1, - GP21, 1, - GP22, 1, - GP23, 1, - GP24, 1, - GP25, 1, - GP26, 1, - GP27, 1, - GP28, 1, - GP29, 1, - GP30, 1, - GP31, 1, - Offset(0x18), // GPIO Blink - GB00, 8, - GB01, 8, - GB02, 8, - GB03, 8, - Offset(0x2c), // GPIO Invert - GIV0, 8, - GIV1, 8, - GIV2, 8, - GIV3, 8, - Offset(0x30), // GPIO Use Select 2 - GU04, 8, - GU05, 8, - GU06, 8, - GU07, 8, - Offset(0x34), // GPIO IO Select 2 - GIO4, 8, - GIO5, 8, - GIO6, 8, - GIO7, 8, - Offset(0x38), // GPIO Level 2 - GP32, 1, - GP33, 1, - GP34, 1, - GP35, 1, - GP36, 1, - GP37, 1, - GP38, 1, - GP39, 1, - GP40, 1, - GP41, 1, - GP42, 1, - GP43, 1, - GP44, 1, - GP45, 1, - GP46, 1, - GP47, 1, - GP48, 1, - GP49, 1, - GP50, 1, - GP51, 1, - GP52, 1, - GP53, 1, - GP54, 1, - GP55, 1, - GP56, 1, - GP57, 1, - GP58, 1, - GP59, 1, - GP60, 1, - GP61, 1, - GP62, 1, - GP63, 1, - Offset(0x40), // GPIO Use Select 3 - GU08, 8, - GU09, 4, - Offset(0x44), // GPIO IO Select 3 - GIO8, 8, - GIO9, 4, - Offset(0x48), // GPIO Level 3 - GP64, 1, - GP65, 1, - GP66, 1, - GP67, 1, - GP68, 1, - GP69, 1, - GP70, 1, - GP71, 1, - GP72, 1, - GP73, 1, - GP74, 1, - GP75, 1, - } - - // ICH7 Root Complex Register Block. Memory Mapped through RCBA) OperationRegion(RCRB, SystemMemory, DEFAULT_RCBA, 0x4000) Field(RCRB, DWordAcc, Lock, Preserve) @@ -270,6 +103,7 @@ Scope() // Serial IO #if CONFIG_INTEL_LYNXPOINT_LP #include "serialio.asl" +#include "lpt_lp.asl" #endif
Method (_OSC, 4)