[coreboot-gerrit] New patch to review for coreboot: mc_tcu3: Enable graphic init code

[Werner Zeh]

Werner Zeh ([e-mail]) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/13774

-gerrit

commit 64a6769406f513df197e415a0678b8ad07f7e6e3
Author: Werner Zeh 
Date:   Wed Feb 24 07:35:17 2016 +0100

mc_tcu3: Enable graphic init code

The used Baytrail-M SoC on TCU3 tend to have issues
    with DisplayPort if the graphic power gate is not set up
    in coreboot. To avoid this error, use the graphic init
    code on this board.

Change-Id: I973bbaa7d86c1ede1f2884b3a08ccb31f7d85087
    Signed-off-by: Werner Zeh 
---
 src/mainboard/siemens/mc_tcu3/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/src/mainboard/siemens/mc_tcu3/Kconfig b/src/mainboard/siemens/mc_tcu3/Kconfig
index 1b62045..d7ff867 100644
--- a/src/mainboard/siemens/mc_tcu3/Kconfig
+++ b/src/mainboard/siemens/mc_tcu3/Kconfig
@@ -29,6 +29,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
    select SOC_INTEL_FSP_BAYTRAIL_MD
    select USE_BLOBS
    select CBFS_AUTOGEN_ATTRIBUTES
+	select FSP_BAYTRAIL_GFX_INIT

config MAINBOARD_DIR
    string