Frans Hendriks has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33736
Change subject: mainboard/facebook/fbg1701: Rename tc348860_table ......................................................................
mainboard/facebook/fbg1701: Rename tc348860_table
tc348860_table contains the eDP to MIPI Bridge controller type. b101uan08_table used the LCD Panel type. Use LCD Panel type for name of tables.
Remove the incomplete resolution comments and specify the resolution at the startof the table to 1200x1920.
BUG=N/A TEST=Config eDP and verify LCD panels are working on Facebook FBG-1701
Change-Id: Ic152ea1f95f155ab76638b57a259d37ce6f43037 Signed-off-by: Frans Hendriks fhendriks@eltan.com --- M src/mainboard/facebook/fbg1701/ramstage.c 1 file changed, 4 insertions(+), 6 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/36/33736/1
diff --git a/src/mainboard/facebook/fbg1701/ramstage.c b/src/mainboard/facebook/fbg1701/ramstage.c index 3903a64..5c78bcc 100644 --- a/src/mainboard/facebook/fbg1701/ramstage.c +++ b/src/mainboard/facebook/fbg1701/ramstage.c @@ -28,8 +28,8 @@ u8 data[6]; } __packed;
-static const struct edp_data tc348860_table[] = { - /* set eDP bridge to eDP 1920 */ +static const struct edp_data b101uan01_table[] = { + /* set eDP bridge to 1200x1920 */ /* IO */ { 6, 0x68, { 0x08, 0x00, 0x01, 0x00, 0x00, 0x00 } }, /* Boot */ @@ -173,7 +173,7 @@ };
static const struct edp_data b101uan08_table[] = { - /* set eDP bridge to eDP 1920 */ + /* set eDP bridge to 1200x1920 */ /* IO Voltage Setting */ { 6, 0x68, { 0x08, 0x00, 0x01, 0x00, 0x00, 0x00 } }, /* Boot Settings */ @@ -333,7 +333,7 @@ CPLD_PCB_VERSION_BIT; printk(BIOS_DEBUG, "CPLD version: %x\n", cpld_version); if (cpld_version < 7) - edptable = tc348860_table; + edptable = b101uan01_table; else edptable = b101uan08_table;
@@ -341,7 +341,6 @@ outb(CPLD_CMD_RESET_DSI_BRIDGE_ACTIVE, CPLD_RESET_PORT); outb(CPLD_CMD_RESET_DSI_BRIDGE_INACTIVE, CPLD_RESET_PORT);
- /* set eDP bridge to eDP 1920 */ while (edptable->payload_length) { loops = 5; do { @@ -360,7 +359,6 @@
void mainboard_silicon_init_params(SILICON_INIT_UPD *params) { - /* Configure the eDP bridge to eDP 1920 */ mainboard_configure_edp_bridge();
if (CONFIG(FSP1_1_DISPLAY_LOGO)) {