HAOUAS Elyes (ehaouas@noos.fr) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/6351
-gerrit
commit 5ff7a81af0aefa8427ff8b745f116cec3c31abea Author: Elyes HAOUAS ehaouas@noos.fr Date: Wed Jul 23 10:43:25 2014 +0200
lippert/spacerunner-lx/devicetree.cb: Remove a trailing whitespace
Change-Id: I1a5b5d19ff72b028bbf5bb1c1414eebbf9827a2b Signed-off-by: Elyes HAOUAS ehaouas@noos.fr --- src/mainboard/lippert/spacerunner-lx/devicetree.cb | 176 ++++++++++----------- 1 file changed, 88 insertions(+), 88 deletions(-)
diff --git a/src/mainboard/lippert/spacerunner-lx/devicetree.cb b/src/mainboard/lippert/spacerunner-lx/devicetree.cb index 9a56521..8619e84 100644 --- a/src/mainboard/lippert/spacerunner-lx/devicetree.cb +++ b/src/mainboard/lippert/spacerunner-lx/devicetree.cb @@ -1,90 +1,90 @@ chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, - # UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 - register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" # 0:host, 1:device - register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3E8" - register "com1_irq" = "6" - register "com2_enable" = "0" - register "com2_address" = "0x2E8" - register "com2_irq" = "6" - register "unwanted_vpci[0]" = "0x80007B00" # Audio: 1<<31 + Device 0x0F<<11 + Function 3<<8 - register "unwanted_vpci[1]" = "0" # End of list has a zero - device pci 8.0 on end # Slot4 - device pci 9.0 on end # Slot3 - device pci a.0 on end # Slot2 - device pci b.0 on end # Slot1 - device pci c.0 on end # IT8888 - device pci e.0 on end # Ethernet - device pci f.0 on # ISA Bridge - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 # EC - io 0x62 = 0x298 # PME - irq 0x70 = 9 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 # Simple I/O - io 0x64 = 0x1228 # SPI - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end - end - device pci f.2 on end # IDE - device pci f.3 off end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end + device domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Graphics + device pci 1.2 on end # AES + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, + # UARTs, etc IRQs. OK + register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 + register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" # 0:host, 1:device + register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x3E8" + register "com1_irq" = "6" + register "com2_enable" = "0" + register "com2_address" = "0x2E8" + register "com2_irq" = "6" + register "unwanted_vpci[0]" = "0x80007B00" # Audio: 1<<31 + Device 0x0F<<11 + Function 3<<8 + register "unwanted_vpci[1]" = "0" # End of list has a zero + device pci 8.0 on end # Slot4 + device pci 9.0 on end # Slot3 + device pci a.0 on end # Slot2 + device pci b.0 on end # Slot1 + device pci c.0 on end # IT8888 + device pci e.0 on end # Ethernet + device pci f.0 on # ISA Bridge + chip superio/ite/it8712f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # EC + io 0x60 = 0x290 # EC + io 0x62 = 0x298 # PME + irq 0x70 = 9 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO + io 0x62 = 0x1220 # Simple I/O + io 0x64 = 0x1228 # SPI + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # Game port + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end + end + device pci f.2 on end # IDE + device pci f.3 off end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. + device cpu_cluster 0 on + chip cpu/amd/geode_lx + device lapic 0 on end + end + end end