Ivy Jian has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/78174?usp=email )
Change subject: mb/google/rex: Use upstream driver properties for SX9324 ......................................................................
mb/google/rex: Use upstream driver properties for SX9324
Use human readable properties as upstream driver support.
BUG=b:297977526 TEST=Able to get sensor values changed w/wo a hand covering the device.
before this CL , SSD.dsl of STH9324 Package (0x02) { "semtech,ph0-pin", Package (0x03) { Zero, Zero, Zero }, ... Package (0x02) { "semtech,ph23-resolution", Zero }, Package (0x02) { "semtech,startup-sensor", Zero }, ....
after this CL , SSD.dsl of STH9324
Package (0x02) { "semtech,ph0-pin", Package (0x03) { One, 0x02, 0x02 }, ... Package (0x02) { " semtech,ph23-resolution", 0x0400 }, Package (0x02) { "semtech,startup-sensor", One },
Change-Id: Ie0d929228f4510f33b07d9c4cfdfcd2a9a437c27 Signed-off-by: Ivy Jian ivy.jian@quanta.corp-partner.google.com --- M src/mainboard/google/rex/variants/rex0/overridetree.cb 1 file changed, 47 insertions(+), 95 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/74/78174/1
diff --git a/src/mainboard/google/rex/variants/rex0/overridetree.cb b/src/mainboard/google/rex/variants/rex0/overridetree.cb index 1d4ba63..6442bcd 100644 --- a/src/mainboard/google/rex/variants/rex0/overridetree.cb +++ b/src/mainboard/google/rex/variants/rex0/overridetree.cb @@ -692,101 +692,53 @@ end end chip drivers/i2c/sx9324 - register "desc" = ""SAR1 Proximity Sensor"" - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E00_IRQ)" - register "speed" = "I2C_SPEED_FAST" - register "uid" = "1" - register "reg_gnrl_ctrl0" = "0x16" - register "reg_gnrl_ctrl1" = "0x21" - register "reg_afe_ctrl0" = "0x00" - register "reg_afe_ctrl1" = "0x10" - register "reg_afe_ctrl2" = "0x00" - register "reg_afe_ctrl3" = "0x00" - register "reg_afe_ctrl4" = "0x07" - register "reg_afe_ctrl5" = "0x00" - register "reg_afe_ctrl6" = "0x00" - register "reg_afe_ctrl7" = "0x07" - register "reg_afe_ctrl8" = "0x12" - register "reg_afe_ctrl9" = "0x0f" - register "reg_prox_ctrl0" = "0x12" - register "reg_prox_ctrl1" = "0x12" - register "reg_prox_ctrl2" = "0x90" - register "reg_prox_ctrl3" = "0x60" - register "reg_prox_ctrl4" = "0x0c" - register "reg_prox_ctrl5" = "0x12" - register "reg_prox_ctrl6" = "0x3c" - register "reg_prox_ctrl7" = "0x58" - register "reg_adv_ctrl0" = "0x00" - register "reg_adv_ctrl1" = "0x00" - register "reg_adv_ctrl2" = "0x00" - register "reg_adv_ctrl3" = "0x00" - register "reg_adv_ctrl4" = "0x00" - register "reg_adv_ctrl5" = "0x05" - register "reg_adv_ctrl6" = "0x00" - register "reg_adv_ctrl7" = "0x00" - register "reg_adv_ctrl8" = "0x00" - register "reg_adv_ctrl9" = "0x00" - register "reg_adv_ctrl10" = "0x5c" - register "reg_adv_ctrl11" = "0x52" - register "reg_adv_ctrl12" = "0xb5" - register "reg_adv_ctrl13" = "0x00" - register "reg_adv_ctrl14" = "0x80" - register "reg_adv_ctrl15" = "0x0c" - register "reg_adv_ctrl16" = "0x38" - register "reg_adv_ctrl17" = "0x56" - register "reg_adv_ctrl18" = "0x33" - register "reg_adv_ctrl19" = "0xf0" - register "reg_adv_ctrl20" = "0xf0" - device i2c 28 on end - end - chip drivers/i2c/sx9324 - register "desc" = ""SAR2 Proximity Sensor"" - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E08_IRQ)" - register "speed" = "I2C_SPEED_FAST" - register "uid" = "2" - register "reg_gnrl_ctrl0" = "0x16" - register "reg_gnrl_ctrl1" = "0x21" - register "reg_afe_ctrl0" = "0x00" - register "reg_afe_ctrl1" = "0x10" - register "reg_afe_ctrl2" = "0x00" - register "reg_afe_ctrl3" = "0x00" - register "reg_afe_ctrl4" = "0x07" - register "reg_afe_ctrl5" = "0x00" - register "reg_afe_ctrl6" = "0x00" - register "reg_afe_ctrl7" = "0x07" - register "reg_afe_ctrl8" = "0x12" - register "reg_afe_ctrl9" = "0x0f" - register "reg_prox_ctrl0" = "0x12" - register "reg_prox_ctrl1" = "0x12" - register "reg_prox_ctrl2" = "0x90" - register "reg_prox_ctrl3" = "0x60" - register "reg_prox_ctrl4" = "0x0c" - register "reg_prox_ctrl5" = "0x12" - register "reg_prox_ctrl6" = "0x3c" - register "reg_prox_ctrl7" = "0x58" - register "reg_adv_ctrl0" = "0x00" - register "reg_adv_ctrl1" = "0x00" - register "reg_adv_ctrl2" = "0x00" - register "reg_adv_ctrl3" = "0x00" - register "reg_adv_ctrl4" = "0x00" - register "reg_adv_ctrl5" = "0x05" - register "reg_adv_ctrl6" = "0x00" - register "reg_adv_ctrl7" = "0x00" - register "reg_adv_ctrl8" = "0x00" - register "reg_adv_ctrl9" = "0x00" - register "reg_adv_ctrl10" = "0x5c" - register "reg_adv_ctrl11" = "0x52" - register "reg_adv_ctrl12" = "0xb5" - register "reg_adv_ctrl13" = "0x00" - register "reg_adv_ctrl14" = "0x80" - register "reg_adv_ctrl15" = "0x0c" - register "reg_adv_ctrl16" = "0x38" - register "reg_adv_ctrl17" = "0x56" - register "reg_adv_ctrl18" = "0x33" - register "reg_adv_ctrl19" = "0xf0" - register "reg_adv_ctrl20" = "0xf0" - device i2c 2C on end - end + register "desc" = ""SAR Proximity Sensor"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E00_IRQ)" + register "speed" = "I2C_SPEED_FAST" + register "uid" = "1" + register "ph0_pin" = "{1, 2, 2}" + register "ph1_pin" = "{2, 1, 2}" + register "ph2_pin" = "{2, 2, 1}" + register "ph3_pin" = "{2, 1, 1}" + register "ph01_resolution" = "1024" + register "ph23_resolution" = "1024" + register "startup_sensor" = "1" + register "ph01_proxraw_strength" = "2" + register "ph23_proxraw_strength" = "2" + register "avg_pos_strength" = "256" + register "cs_idle_sleep" = ""hi-z"" + register "int_comp_resistor" = ""lowest"" + register "input_precharge_resistor_ohms" = "4000" + register "input_analog_gain" = "1" + device i2c 28 on + probe CELLULAR CELLULAR_USB + probe CELLULAR CELLULAR_PCIE + end + end + chip drivers/i2c/sx9324 + register "desc" = ""SAR Proximity Sensor"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E08_IRQ)" + register "speed" = "I2C_SPEED_FAST" + register "uid" = "2" + register "ph0_pin" = "{1, 2, 2}" + register "ph1_pin" = "{2, 1, 2}" + register "ph2_pin" = "{2, 2, 1}" + register "ph3_pin" = "{2, 1, 1}" + register "ph01_resolution" = "1024" + register "ph23_resolution" = "1024" + register "startup_sensor" = "1" + register "ph01_proxraw_strength" = "2" + register "ph23_proxraw_strength" = "2" + register "avg_pos_strength" = "256" + register "cs_idle_sleep" = ""hi-z"" + register "int_comp_resistor" = ""lowest"" + register "input_precharge_resistor_ohms" = "4000" + register "input_analog_gain" = "1" + device i2c 2c on + probe CELLULAR CELLULAR_USB + probe CELLULAR CELLULAR_PCIE + end + end end #I2C5 device ref pcie_rp5 on probe WIFI WIFI_PCIE