[coreboot-gerrit] Change in ...coreboot[master]: mainboard/google/hatch: Update Helios device tree

[Tim Wawrzynczak (Code Review)]

Tim Wawrzynczak has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33050

Change subject: mainboard/google/hatch: Update Helios device tree
......................................................................

mainboard/google/hatch: Update Helios device tree

Update Helios device tree override to match schematics.

BUG=b:133182138
BRANCH=none
TEST=Compiles

Change-Id: I3d15fc43651a289d16ffb3cfadaea8f786e858fc
Signed-off-by: Tim Wawrzynczak 
---
M src/mainboard/google/hatch/variants/helios/overridetree.cb
1 file changed, 88 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/50/33050/1

diff --git a/src/mainboard/google/hatch/variants/helios/overridetree.cb b/src/mainboard/google/hatch/variants/helios/overridetree.cb
index 84f0e29..4fecab3 100644
--- a/src/mainboard/google/hatch/variants/helios/overridetree.cb
+++ b/src/mainboard/google/hatch/variants/helios/overridetree.cb
@@ -14,6 +14,9 @@
    	[PchSerialIoIndexUART2] = PchSerialIoDisabled,
    }"

+	# No PCIe WiFi
+	register "PcieRpEnable[13]" = "0"
+
    # Intel Common SoC Config
    #+-------------------+---------------------------+
    #| Field	     |	Value			 |
@@ -42,5 +45,89 @@
    	},
    }"

-	device domain 0 on end
+	device domain 0 on
+		device pci 14.0 on
+			chip drivers/usb/acpi
+				device usb 0.0 on
+					chip drivers/usb/acpi
+						# No Type-A port
+						device usb 2.2 off end
+					end
+					chip drivers/usb/acpi
+						# No Type-A Port
+						device usb 2.3 off end
+					end
+					chip drivers/usb/acpi
+						# No WWAN
+						device usb 2.5 off end
+					end
+					chip drivers/usb/acpi
+						# No WWAN
+						device usb 3.4 off end
+					end
+				end
+			end
+		end
+
+		# Native SD Card interface unused
+		device pci 14.5 off end
+
+		device pci 15.0 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A20_IRQ)"
+				register "wake" = "GPE0_DW0_21"
+				device i2c 15 on end
+			end
+		end
+
+		device pci 15.1 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""GDIX0000""
+				register "generic.desc" = ""Goodix Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)"
+				register "generic.reset_delay_ms" = "10"
+				register "generic.reset_off_delay_ms" = "1"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 5d on end
+			end
+			chip drivers/generic/gpio_keys
+				register "name" = ""PENH""
+				register "gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A8)"
+				register "key.wake" = "GPE0_DW0_08"
+				register "key.wakeup_event_action" = "EV_ACT_ASSERTED"
+				register "key.dev_name" = ""EJCT""
+				register "key.linux_code" = "SW_PEN_INSERTED"
+				register "key.linux_input_type" = "EV_SW"
+				register "key.label" = ""pen_eject""
+				device generic 0 on end
+			end
+		end # I2C 1
+
+		# I2C #2 unused
+		device pci 15.2 off end
+
+		# I2C #3 unused
+		device pci 15.3 off end
+
+		device pci 19.0 on
+			chip drivers/i2c/generic
+				register "hid" = ""10EC5682""
+				register "name" = ""RT58""
+				register "desc" = ""Realtek RT5682""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)"
+				register "property_count" = "1"
+				# Set the jd_src to RT5668_JD1 for jack detection
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-src""
+				register "property_list[0].integer" = "1"
+				device i2c 1a on end
+			end
+		end #I2C #4
+	end
 end