[coreboot-gerrit] [S] Change in coreboot[main]: mb/google/brox/var/jubilant: Add SAR sensor SX9324

[Ren Kuo (Code Review)]

Attention is currently required from: Karthik Ramasubramanian, Paul Menzel, Shelley Chen, Sheng-Liang Pan.

Ren Kuo has posted comments on this change by Ren Kuo. ( https://review.coreboot.org/c/coreboot/+/83779?usp=email )

Change subject: mb/google/brox/var/jubilant: Add SAR sensor SX9324
......................................................................

Patch Set 8:

(1 comment)

File src/mainboard/google/brox/variants/jubilant/overridetree.cb:

https://review.coreboot.org/c/coreboot/+/83779/comment/947dbe0c_64fd6fb7?usp... :
PS7, Line 412: register "ph0_pin" = "{1, 2, 2}"
             : 				register "ph1_pin" = "{2, 1, 2}"
             : 				register "ph2_pin" = "{2, 2, 1}"
             : 				register "ph3_pin" = "{2, 1, 1}"
             : 				register "ph01_resolution" = "1024"
             : 				register "ph23_resolution" = "1024"
             : 				register "startup_sensor" = "1"
             : 				register "ph01_proxraw_strength" = "2"
             : 				register "ph23_proxraw_strength" = "2"
             : 				register "avg_pos_strength" = "256"
             : 				register "cs_idle_sleep" = ""hi-z""
             : 				register "int_comp_resistor" = ""lowest""
             : 				register "input_precharge_resistor_ohms" = "4000"
             : 				register "input_analog_gain" = "1"
             : 				device i2c 28 on
             : 					probe DB_USB DB_1A_LTE
             : 				end
> Please document the source for these values in the commit message.

Done.