Denis Carikli (GNUtoo@no-log.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3324
-gerrit
commit 73fa455a58299b7fbd4210b57d60e1440922478e Author: Denis 'GNUtoo' Carikli GNUtoo@no-log.org Date: Thu May 9 16:14:59 2013 +0200
Asus M4A785T-M: Add CMOS defaults.
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Enable baud_rate = 115200 hw_scrubber = Enable interleave_chip_selects = Enable max_mem_clock = 400Mhz multi_core = Enable power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0xc slow_cpu = off nmi = Enable iommu = Enable nvramtool: Can not read coreboot parameter user_data because layout info specifies CMOS area that is too wide. nvramtool: Warning: Coreboot CMOS checksum is bad.
Change-Id: Idea03b9bc75c5c34c7ce521ce5e5a1c1bb6dfa96 Signed-off-by: Denis 'GNUtoo' Carikli GNUtoo@no-log.org --- src/mainboard/asus/m4a785t-m/Kconfig | 1 + src/mainboard/asus/m4a785t-m/cmos.default | 18 ++++++++++++++++++ 2 files changed, 19 insertions(+)
diff --git a/src/mainboard/asus/m4a785t-m/Kconfig b/src/mainboard/asus/m4a785t-m/Kconfig index 10f6838..6816d58 100644 --- a/src/mainboard/asus/m4a785t-m/Kconfig +++ b/src/mainboard/asus/m4a785t-m/Kconfig @@ -12,6 +12,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select SOUTHBRIDGE_AMD_SB700_SKIP_ISA_DMA_INIT select SUPERIO_ITE_IT8712F select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT select HAVE_PIRQ_TABLE select HAVE_MP_TABLE select SB_HT_CHAIN_UNITID_OFFSET_ONLY diff --git a/src/mainboard/asus/m4a785t-m/cmos.default b/src/mainboard/asus/m4a785t-m/cmos.default new file mode 100644 index 0000000..da086de --- /dev/null +++ b/src/mainboard/asus/m4a785t-m/cmos.default @@ -0,0 +1,18 @@ +boot_option=Fallback +last_boot=Fallback +ECC_memory=Enable +baud_rate=115200 +hw_scrubber=Enable +interleave_chip_selects=Enable +max_mem_clock=400Mhz +multi_core=Enable +power_on_after_fail=Disable +debug_level=Spew +boot_first=HDD +boot_second=Fallback_Floppy +boot_third=Fallback_Network +boot_index=0xf +boot_countdown=0xc +slow_cpu=off +nmi=Enable +iommu=Enable