[coreboot-gerrit] Change in coreboot[master]: [TESTME] sb/amd/pi/hudson/early_init: fix setting SPI_USE_SPI100 in S...

[Michał Żygowski (Code Review)]

Attention is currently required from: Michał Kopeć, Felix Held.
Michał Żygowski has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/59934 )

Change subject: [TESTME] sb/amd/pi/hudson/early_init: fix setting SPI_USE_SPI100 in SPI100_ENABLE
......................................................................

Patch Set 1:

(1 comment)

Patchset:

PS1: 
SPIx20 register in BKDG describes only the bit0 (SPI100_ENABLE), the rest is reserved. It is still wise though to set only the known bits.

MIchał, the flash used on apu2 can support 104MHz so the test would really be reliable if called hudson_set_spi(SPI_SPEED_100M, SPI_SPEED_100M, SPI_SPEED_100M, SPI_SPEED_100M);