Patrick Georgi has submitted this change and it was merged. ( https://review.coreboot.org/c/coreboot/+/31445 )
Change subject: soc/intel/cannonlake: Add a config for configuring SD_VDD1_PWR_EN# ......................................................................
soc/intel/cannonlake: Add a config for configuring SD_VDD1_PWR_EN#
SD controller in CNL-PCH provides a ability to configure the behavior of SD_VDD1_PWR_EN# as an active high or low signal. FSP provides an UPD "SdCardPowerEnableActiveHigh" to control the same.
However, for platforms using SD_VDD1_PWR_EN# as active high, the SDXC card connector is always powered and may impact system power. This is because SD_VDD1_PWR_EN# does not de-assert during SDXC D3 or when SD card is not inserted.
Workaround is to change the pad ownership of SD_VDD1_PWR_EN to GPIO and force the TX buffer to low in _PS3. And restore the pad mode to native function in _PS0.
Hence add a Kconfig option to update the UPD, which the board can select based on how the SD_VDD1_PWR_EN is implemented on it. And, the workaround gets applied based on this config.
BUG=b:123350329
Change-Id: Iee262d7ecdf8c31362aec3d95dd9b3e8359e0c25 Signed-off-by: Rizwan Qureshi rizwan.qureshi@intel.com Reviewed-on: https://review.coreboot.org/c/31445 Reviewed-by: Furquan Shaikh furquan@google.com Reviewed-by: Nico Huber nico.h@gmx.de Tested-by: build bot (Jenkins) no-reply@coreboot.org --- M src/soc/intel/cannonlake/Kconfig M src/soc/intel/cannonlake/acpi/scs.asl M src/soc/intel/cannonlake/fsp_params.c M src/soc/intel/cannonlake/include/soc/gpio_soc_defs.h 4 files changed, 32 insertions(+), 2 deletions(-)
Approvals: build bot (Jenkins): Verified Nico Huber: Looks good to me, approved Furquan Shaikh: Looks good to me, approved
diff --git a/src/soc/intel/cannonlake/Kconfig b/src/soc/intel/cannonlake/Kconfig index cd8819d..927409d 100644 --- a/src/soc/intel/cannonlake/Kconfig +++ b/src/soc/intel/cannonlake/Kconfig @@ -235,6 +235,15 @@ hex default 0x200000
+config MB_HAS_ACTIVE_HIGH_SD_PWR_ENABLE + bool + default n + help + Select this if the board has a SD_PWR_ENABLE pin connected to a + active high sensing load switch to turn on power to the card reader. + This will enable a workaround in ASL _PS3 and _PS0 methods to force + SD_PWR_ENABLE to stay low in D3. + choice prompt "Cache-as-ram implementation" default USE_CANNONLAKE_CAR_NEM_ENHANCED if MAINBOARD_HAS_CHROMEOS diff --git a/src/soc/intel/cannonlake/acpi/scs.asl b/src/soc/intel/cannonlake/acpi/scs.asl index 896fd77..1806e75 100644 --- a/src/soc/intel/cannonlake/acpi/scs.asl +++ b/src/soc/intel/cannonlake/acpi/scs.asl @@ -111,6 +111,11 @@ /* Set Power State to D0 */ And (PMCR, 0xFFFC, PMCR) Store (PMCR, ^TEMP) + +#if IS_ENABLED(CONFIG_MB_HAS_ACTIVE_HIGH_SD_PWR_ENABLE) + /* Change pad mode to Native */ + GPMO(SD_PWR_EN_PIN, 0x1) +#endif }
Method (_PS3, 0, Serialized) @@ -120,6 +125,17 @@ /* Set Power State to D3 */ Or (PMCR, 0x0003, PMCR) Store (PMCR, ^TEMP) + +#if IS_ENABLED(CONFIG_MB_HAS_ACTIVE_HIGH_SD_PWR_ENABLE) + /* Change pad mode to GPIO control */ + GPMO(SD_PWR_EN_PIN, 0x0) + + /* Enable Tx Buffer */ + GTXE(SD_PWR_EN_PIN, 0x1) + + /* Drive TX to zero */ + CTXS(SD_PWR_EN_PIN) +#endif }
Device (CARD) diff --git a/src/soc/intel/cannonlake/fsp_params.c b/src/soc/intel/cannonlake/fsp_params.c index 17a014b..1ebde35 100644 --- a/src/soc/intel/cannonlake/fsp_params.c +++ b/src/soc/intel/cannonlake/fsp_params.c @@ -208,10 +208,13 @@ }
dev = dev_find_slot(0, PCH_DEVFN_SDCARD); - if (!dev) + if (!dev) { params->ScsSdCardEnabled = 0; - else + } else { params->ScsSdCardEnabled = dev->enabled; + params->SdCardPowerEnableActiveHigh = + IS_ENABLED(CONFIG_MB_HAS_ACTIVE_HIGH_SD_PWR_ENABLE); + }
dev = dev_find_slot(0, PCH_DEVFN_UFS); if (!dev) diff --git a/src/soc/intel/cannonlake/include/soc/gpio_soc_defs.h b/src/soc/intel/cannonlake/include/soc/gpio_soc_defs.h index 5d7c0e8..03f4314 100644 --- a/src/soc/intel/cannonlake/include/soc/gpio_soc_defs.h +++ b/src/soc/intel/cannonlake/include/soc/gpio_soc_defs.h @@ -352,4 +352,6 @@ #define NUM_GPIO_COM3_PADS (GPIO_RSVD_38 - HDA_BCLK + 1)
#define TOTAL_PADS 275 + +#define SD_PWR_EN_PIN GPP_A17 #endif