[coreboot-gerrit] [M] Change in coreboot[main]: mb/trulo/var/uldrenite: Enable eMMC and DLL tuning parameters

[John Su (Code Review)]

John Su has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/85579?usp=email )

Change subject: mb/trulo/var/uldrenite: Enable eMMC and DLL tuning parameters
......................................................................

mb/trulo/var/uldrenite: Enable eMMC and DLL tuning parameters

Enable eMMC and add DLL tuning parameters.

BUG=b:380789023
TEST=emerge-nissa coreboot

Change-Id: I5f0fdb31ce4eaad5537df36c4165c404239a7bd4
Signed-off-by: John Su 
---
M src/mainboard/google/brya/variants/uldrenite/overridetree.cb
1 file changed, 51 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/79/85579/1

diff --git a/src/mainboard/google/brya/variants/uldrenite/overridetree.cb b/src/mainboard/google/brya/variants/uldrenite/overridetree.cb
index 050cbec..35d80f8 100644
--- a/src/mainboard/google/brya/variants/uldrenite/overridetree.cb
+++ b/src/mainboard/google/brya/variants/uldrenite/overridetree.cb
@@ -9,6 +9,55 @@

register "tcc_offset" = "5"     # TCC of 100

+	# eMMC HS400
+	register "emmc_enable_hs400_mode" = "true"
+
+	#eMMC DLL tuning parameters
+	# EMMC Tx CMD Delay
+	# Refer to EDS-Vol2-42.3.7.
+	# [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39.
+	# [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39.
+	register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505"
+
+	# EMMC TX DATA Delay 1
+	# Refer to EDS-Vol2-42.3.8.
+	# [14:8] steps of delay for HS400, each 125ps, range: 0 - 78.
+	# [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79.
+	register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x909"
+
+	# EMMC TX DATA Delay 2
+	# Refer to EDS-Vol2-42.3.9.
+	# [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79.
+	# [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78.
+	# [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79.
+	# [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79.
+	register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C2A2828"
+
+	# EMMC RX CMD/DATA Delay 1
+	# Refer to EDS-Vol2-42.3.10.
+	# [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119.
+	# [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78.
+	# [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119.
+	# [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119.
+	register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C1B4F1B"
+
+	# EMMC RX CMD/DATA Delay 2
+	# Refer to EDS-Vol2-42.3.12.
+	# [17:16] stands for Rx Clock before Output Buffer,
+	#         00: Rx clock after output buffer,
+	#         01: Rx clock before output buffer,
+	#         10: Automatic selection based on working mode.
+	#         11: Reserved
+	# [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39.
+	# [6:0] steps of delay for HS200, each 125ps, range: 0 - 79.
+	register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1004E"
+
+	# EMMC Rx Strobe Delay
+	# Refer to EDS-Vol2-42.3.11.
+	# [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39.
+	# [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39.
+	register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x01515"
+
    # Configure external V1P05/Vnn/VnnSx Rails
    register "ext_fivr_settings" = "{
    	.configure_ext_fivr = 1,
@@ -83,5 +132,7 @@
    			device generic 0 on end
    		end
    	end #DPTF
+		device ref shared_sram on end
+		device ref emmc on end
    end
 end