Subrata Banik has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/61828 )
Change subject: mb/google/var/{primus, primus4es}: Use ACPI _PLD macro ......................................................................
mb/google/var/{primus, primus4es}: Use ACPI _PLD macro
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477 TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik subratabanik@google.com Change-Id: I1a4bc1aae8e815b882a607432e40caf1066453b2 --- M src/mainboard/google/brya/variants/primus/overridetree.cb M src/mainboard/google/brya/variants/primus4es/overridetree.cb 2 files changed, 16 insertions(+), 96 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/28/61828/1
diff --git a/src/mainboard/google/brya/variants/primus/overridetree.cb b/src/mainboard/google/brya/variants/primus/overridetree.cb index 6d4522b..f3690ad 100644 --- a/src/mainboard/google/brya/variants/primus/overridetree.cb +++ b/src/mainboard/google/brya/variants/primus/overridetree.cb @@ -319,24 +319,14 @@ register "desc" = ""USB3 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_CENTER, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(1, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, CENTER, ACPI_PLD_GROUP(1, 1))" device ref tcss_usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(2, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(2, 1))" device ref tcss_usb3_port3 on end end end @@ -349,24 +339,14 @@ register "desc" = ""USB2 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_CENTER, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(1, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, CENTER, ACPI_PLD_GROUP(1, 1))" device ref usb2_port1 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(2, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(2, 1))" device ref usb2_port3 on end end chip drivers/usb/acpi @@ -383,24 +363,14 @@ register "desc" = ""USB2 Type-A Port (MLB)"" register "type" = "UPC_TYPE_A" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, - .group = ACPI_PLD_GROUP(4, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(4, 1))" device ref usb2_port8 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port A0 (DB)"" register "type" = "UPC_TYPE_A" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_RIGHT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, - .group = ACPI_PLD_GROUP(1, 2)}" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(1, 2))" device ref usb2_port9 on end end chip drivers/usb/acpi @@ -414,24 +384,14 @@ register "desc" = ""USB3 Type-A Port A0 (DB)"" register "type" = "UPC_TYPE_USB3_A" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_RIGHT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, - .group = ACPI_PLD_GROUP(1, 2)}" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(1, 2))" device ref usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port (MLB)"" register "type" = "UPC_TYPE_USB3_A" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, - .group = ACPI_PLD_GROUP(4, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(4, 1))" device ref usb3_port2 on end end chip drivers/usb/acpi diff --git a/src/mainboard/google/brya/variants/primus4es/overridetree.cb b/src/mainboard/google/brya/variants/primus4es/overridetree.cb index d4f7237..cb3aeeb 100644 --- a/src/mainboard/google/brya/variants/primus4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/primus4es/overridetree.cb @@ -313,24 +313,14 @@ register "desc" = ""USB3 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_CENTER, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(1, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, CENTER, ACPI_PLD_GROUP(1, 1))" device ref tcss_usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(2, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(2, 1))" device ref tcss_usb3_port3 on end end end @@ -343,24 +333,14 @@ register "desc" = ""USB2 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_CENTER, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(1, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, CENTER, ACPI_PLD_GROUP(1, 1))" device ref usb2_port1 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_OVAL, - .group = ACPI_PLD_GROUP(2, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(2, 1))" device ref usb2_port3 on end end chip drivers/usb/acpi @@ -377,24 +357,14 @@ register "desc" = ""USB2 Type-A Port (MLB)"" register "type" = "UPC_TYPE_A" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, - .group = ACPI_PLD_GROUP(4, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(4, 1))" device ref usb2_port8 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port A0 (DB)"" register "type" = "UPC_TYPE_A" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_RIGHT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, - .group = ACPI_PLD_GROUP(1, 2)}" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(1, 2))" device ref usb2_port9 on end end chip drivers/usb/acpi @@ -408,24 +378,14 @@ register "desc" = ""USB3 Type-A Port A0 (DB)"" register "type" = "UPC_TYPE_USB3_A" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_RIGHT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, - .group = ACPI_PLD_GROUP(1, 2)}" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(1, 2))" device ref usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port (MLB)"" register "type" = "UPC_TYPE_USB3_A" register "use_custom_pld" = "true" - register "custom_pld" = "{ - .visible = true, - .panel = PLD_PANEL_LEFT, - .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, - .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, - .group = ACPI_PLD_GROUP(4, 1)}" + register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(4, 1))" device ref usb3_port2 on end end chip drivers/usb/acpi