Dave Frodin (dave.frodin@se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/6065
-gerrit
commit 22e185b0336cb8c0d9bff2b80313b935ee28302c Author: Dave Frodin dave.frodin@se-eng.com Date: Fri Jun 13 08:12:48 2014 -0600
AMD/agesa: Add functions for AMD PCI IRQ routing
Port the changes that were made in amd/cimx to amd/agesa as were done in: commit c93a75a5ab067f86104028b74d92fc54cb939cd5 Author: Mike Loptien mike.loptien@se-eng.com Date: Fri Jun 6 15:16:29 2014 -0600
AMD/CIMx: Add functions for AMD PCI IRQ routing
This change also moves the PCI INT functions to southbridge/amd so that they can be used by CIMX and AGESA. The amd/persimmon board is updated for this change.
Signed-off-by: Dave Frodin dave.frodin@se-eng.com Change-Id: I525be90f9cf8e825e162d53a7ecd1e69c6e27637 --- src/mainboard/amd/persimmon/mainboard.c | 1 + src/mainboard/amd/persimmon/mptable.c | 2 +- src/northbridge/amd/agesa/family15tn/pci_devs.h | 54 ++++++ src/northbridge/amd/agesa/family16kb/pci_devs.h | 44 +++++ src/southbridge/amd/Makefile.inc | 6 + src/southbridge/amd/agesa/hudson/pci.c | 25 +++ src/southbridge/amd/agesa/hudson/pci_devs.h | 121 ++++++++++++ src/southbridge/amd/amd_pci_util.c | 240 ++++++++++++++++++++++++ src/southbridge/amd/amd_pci_util.h | 205 ++++++++++++++++++++ src/southbridge/amd/cimx/cimx_util.c | 197 ------------------- src/southbridge/amd/cimx/cimx_util.h | 85 --------- src/southbridge/amd/cimx/sb800/late.c | 2 +- 12 files changed, 698 insertions(+), 284 deletions(-)
diff --git a/src/mainboard/amd/persimmon/mainboard.c b/src/mainboard/amd/persimmon/mainboard.c index 746b6c2..dbbd638 100644 --- a/src/mainboard/amd/persimmon/mainboard.c +++ b/src/mainboard/amd/persimmon/mainboard.c @@ -24,6 +24,7 @@ #include <arch/io.h> #include <cpu/x86/msr.h> #include <device/pci_def.h> +#include <southbridge/amd/amd_pci_util.h> #include <southbridge/amd/cimx/cimx_util.h> #include <arch/acpi.h> #include "BiosCallOuts.h" diff --git a/src/mainboard/amd/persimmon/mptable.c b/src/mainboard/amd/persimmon/mptable.c index 8639617..2c2ec06 100644 --- a/src/mainboard/amd/persimmon/mptable.c +++ b/src/mainboard/amd/persimmon/mptable.c @@ -27,7 +27,7 @@ #include <stdint.h> #include <cpu/amd/amdfam14.h> #include <SBPLATFORM.h> -#include <southbridge/amd/cimx/cimx_util.h> +#include <southbridge/amd/amd_pci_util.h> #include <drivers/generic/ioapic/chip.h> #include <arch/ioapic.h>
diff --git a/src/northbridge/amd/agesa/family15tn/pci_devs.h b/src/northbridge/amd/agesa/family15tn/pci_devs.h new file mode 100644 index 0000000..d0acb5c --- /dev/null +++ b/src/northbridge/amd/agesa/family15tn/pci_devs.h @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _AMD_FAM15TN_PCI_DEVS_H_ +#define _AMD_FAM15TN_PCI_DEVS_H_ + +#define BUS0 0 + +/* Graphics and Display */ +#define GFX_DEV 0x1 +#define GFX_FUNC 0 +#define GFX_DEVFN PCI_DEVFN(GFX_DEV,GFX_FUNC) + +/* PCIe Ports */ +#define NB_PCIE_PORT1_DEV 0x2 +#define NB_PCIE_PORT2_DEV 0x3 +#define NB_PCIE_PORT3_DEV 0x4 +#define NB_PCIE_PORT4_DEV 0x5 +#define NB_PCIE_PORT5_DEV 0x6 +#define NB_PCIE_PORT6_DEV 0x7 +#define NB_PCIE_PORT7_DEV 0x8 +#define NB_PCIE_FUNC 0 +#define NB_PCIE_PORT1_DEVID 0x1412 +#define NB_PCIE_PORT2_DEVID 0x1413 +#define NB_PCIE_PORT3_DEVID 0x1414 +#define NB_PCIE_PORT4_DEVID 0x1415 +#define NB_PCIE_PORT5_DEVID 0x1416 +#define NB_PCIE_PORT6_DEVID 0x1417 +#define NB_PCIE_PORT7_DEVID 0x1418 +#define NB_PCIE_PORT1_DEVFN PCI_DEVFN(NB_PCIE_PORT1_DEV,NB_PCIE_FUNC) +#define NB_PCIE_PORT2_DEVFN PCI_DEVFN(NB_PCIE_PORT2_DEV,NB_PCIE_FUNC) +#define NB_PCIE_PORT3_DEVFN PCI_DEVFN(NB_PCIE_PORT3_DEV,NB_PCIE_FUNC) +#define NB_PCIE_PORT4_DEVFN PCI_DEVFN(NB_PCIE_PORT4_DEV,NB_PCIE_FUNC) +#define NB_PCIE_PORT5_DEVFN PCI_DEVFN(NB_PCIE_PORT5_DEV,NB_PCIE_FUNC) +#define NB_PCIE_PORT6_DEVFN PCI_DEVFN(NB_PCIE_PORT6_DEV,NB_PCIE_FUNC) +#define NB_PCIE_PORT7_DEVFN PCI_DEVFN(NB_PCIE_PORT7_DEV,NB_PCIE_FUNC) + +#endif /* _AMD_FAM15TN_PCI_DEVS_H_ */ diff --git a/src/northbridge/amd/agesa/family16kb/pci_devs.h b/src/northbridge/amd/agesa/family16kb/pci_devs.h new file mode 100644 index 0000000..be0f524 --- /dev/null +++ b/src/northbridge/amd/agesa/family16kb/pci_devs.h @@ -0,0 +1,44 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _AMD_FAM16KB_PCI_DEVS_H_ +#define _AMD_FAM16KB_PCI_DEVS_H_ + +#define BUS0 0 + +/* Graphics and Display */ +#define GFX_DEV 0x1 +#define GFX_FUNC 0 +#define GFX_DEVFN PCI_DEVFN(GFX_DEV,GFX_FUNC) + +/* PCIe Ports */ +#define NB_PCIE_PORT1_DEV 0x1 +#define NB_PCIE_PORT2_DEV 0x2 +#define NB_PCIE_PORT3_DEV 0x3 +#define NB_PCIE_PORT4_DEV 0x4 +#define NB_PCIE_PORT5_DEV 0x5 +#define NB_PCIE_FUNC 2 +#define NB_PCIE_PORT_DEVID 0x1439 +#define NB_PCIE_PORT1_DEVFN PCI_DEVFN(NB_PCIE_PORT1_DEV,NB_PCIE_FUNC) +#define NB_PCIE_PORT2_DEVFN PCI_DEVFN(NB_PCIE_PORT2_DEV,NB_PCIE_FUNC) +#define NB_PCIE_PORT3_DEVFN PCI_DEVFN(NB_PCIE_PORT3_DEV,NB_PCIE_FUNC) +#define NB_PCIE_PORT4_DEVFN PCI_DEVFN(NB_PCIE_PORT4_DEV,NB_PCIE_FUNC) +#define NB_PCIE_PORT5_DEVFN PCI_DEVFN(NB_PCIE_PORT5_DEV,NB_PCIE_FUNC) + +#endif /* _AMD_FAM16KB_PCI_DEVS_H_ */ diff --git a/src/southbridge/amd/Makefile.inc b/src/southbridge/amd/Makefile.inc index 9ec0171..a6835af 100644 --- a/src/southbridge/amd/Makefile.inc +++ b/src/southbridge/amd/Makefile.inc @@ -17,6 +17,12 @@ subdirs-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB900) += cimx subdirs-$(CONFIG_SOUTHBRIDGE_AMD_AGESA_HUDSON) += agesa subdirs-$(CONFIG_SOUTHBRIDGE_AMD_AGESA_YANGTZE) += agesa
+ramstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += amd_pci_util.c +ramstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB800) += amd_pci_util.c +ramstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB900) += amd_pci_util.c +ramstage-$(CONFIG_SOUTHBRIDGE_AMD_AGESA_HUDSON) += amd_pci_util.c +ramstage-$(CONFIG_SOUTHBRIDGE_AMD_AGESA_YANGTZE) += amd_pci_util.c + ifeq ($(CONFIG_HAVE_ACPI_RESUME), y) ifeq ($(CONFIG_CPU_AMD_AGESA), y)
diff --git a/src/southbridge/amd/agesa/hudson/pci.c b/src/southbridge/amd/agesa/hudson/pci.c index 58498f4..e8836e4 100644 --- a/src/southbridge/amd/agesa/hudson/pci.c +++ b/src/southbridge/amd/agesa/hudson/pci.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2010 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -23,11 +24,35 @@ #include <device/pci_ids.h> #include <device/pci_ops.h> #include "hudson.h" +#include <southbridge/amd/amd_pci_util.h> +#include <bootstate.h>
static void pci_init(struct device *dev) { }
+/* + * Update the PCI devices with a valid IRQ number + * that is set in the mainboard PCI_IRQ structures. + */ +static void set_pci_irqs(void *unused) +{ + /* Write PCI_INTR regs 0xC00/0xC01 */ + write_pci_int_table(); + + /* Write IRQs for all devicetree enabled devices */ + write_pci_cfg_irqs(); +} + +/* + * Hook this function into the PCI state machine + * on entry into BS_DEV_ENABLE. + */ +BOOT_STATE_INIT_ENTRIES(pci_irq_update) = { + BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, + set_pci_irqs, NULL), +}; + static struct pci_operations lops_pci = { .set_subsystem = 0, }; diff --git a/src/southbridge/amd/agesa/hudson/pci_devs.h b/src/southbridge/amd/agesa/hudson/pci_devs.h new file mode 100644 index 0000000..b66a232 --- /dev/null +++ b/src/southbridge/amd/agesa/hudson/pci_devs.h @@ -0,0 +1,121 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _AGESA_HUDSON_PCI_DEVS_H_ +#define _AGESA_HUDSON_PCI_DEVS_H_ + +#define BUS0 0 + +/* XHCI */ +#define XHCI_DEV 0x10 +#define XHCI_FUNC 0 +#define XHCI_DEVID 0x7814 +#define XHCI_DEVFN PCI_DEVFN(XHCI_DEV,XHCI_FUNC) + +/* SATA */ +#define SATA_DEV 0x11 +#define SATA_FUNC 0 +#define SATA_IDE_DEVID 0x7800 +#define AHCI_DEVID_MS 0x7801 +#define AHCI_DEVID_AMD 0x7804 +#define SATA_DEVFN PCI_DEVFN(SATA_DEV,SATA_FUNC) + +/* OHCI */ +#define OHCI1_DEV 0x12 +#define OHCI1_FUNC 0 +#define OHCI2_DEV 0x13 +#define OHCI2_FUNC 0 +#define OHCI3_DEV 0x16 +#define OHCI3_FUNC 0 +#define OHCI4_DEV 0x14 +#define OHCI4_FUNC 5 +#define OHCI_DEVID 0x7807 +#define OHCI1_DEVFN PCI_DEVFN(OHCI1_DEV,OHCI1_FUNC) +#define OHCI2_DEVFN PCI_DEVFN(OHCI2_DEV,OHCI2_FUNC) +#define OHCI3_DEVFN PCI_DEVFN(OHCI3_DEV,OHCI3_FUNC) +#define OHCI4_DEVFN PCI_DEVFN(OHCI4_DEV,OHCI4_FUNC) + +/* EHCI */ +#define EHCI1_DEV 0x12 +#define EHCI1_FUNC 2 +#define EHCI2_DEV 0x13 +#define EHCI2_FUNC 2 +#define EHCI3_DEV 0x22 +#define EHCI3_FUNC 2 +#define EHCI_DEVID 0x7808 +#define EHCI1_DEVFN PCI_DEVFN(EHCI1_DEV,EHCI1_FUNC) +#define EHCI2_DEVFN PCI_DEVFN(EHCI2_DEV,EHCI2_FUNC) +#define EHCI3_DEVFN PCI_DEVFN(EHCI3_DEV,EHCI3_FUNC) + +/* SMBUS */ +#define SMBUS_DEV 0x14 +#define SMBUS_FUNC 0 +#define SMBUS_DEVID 0x780B +#define SMBUS_DEVFN PCI_DEVFN(SMBUS_DEV,SMBUS_FUNC) + +/* IDE */ +#if IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_AGESA_HUDSON) +#define IDE_DEV 0x14 +#define IDE_FUNC 1 +# define IDE_DEVID 0x780C +# define IDE_DEVFN PCI_DEVFN(IDE_DEV,IDE_FUNC) +#endif + +/* HD Audio */ +#define HDA_DEV 0x14 +#define HDA_FUNC 2 +#define HDA_DEVID 0x780D +#define HDA_DEVFN PCI_DEVFN(HDA_DEV,HDA_FUNC) + +/* LPC BUS */ +#define PCU_DEV 0x14 +#define LPC_FUNC 3 +#define LPC_DEVID 0x780E +#define LPC_DEVFN PCI_DEVFN(LPC_DEV,LPC_FUNC) + +/* PCI Ports */ +#define SB_PCI_PORT_DEV 0x14 +#define SB_PCI_PORT_FUNC 4 +# define SB_PCI_PORT_DEVID 0x780F +# define SB_PCI_PORT_DEVFN PCI_DEVFN(SB_PCI_PORT_DEV,SB_PCI_PORT_FUNC) + +/* SD Controller */ +#define SD_DEV 0x14 +#define SD_FUNC 7 +#define SD_DEVID 0x7806 +#define SD_DEVFN PCI_DEVFN(SD_DEV,SD_FUNC) + +/* PCIe Ports */ +#if IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_AGESA_HUDSON) +#define SB_PCIE_DEV 0x15 +#define SB_PCIE_PORT1_FUNC 0 +#define SB_PCIE_PORT2_FUNC 1 +#define SB_PCIE_PORT3_FUNC 2 +#define SB_PCIE_PORT4_FUNC 3 +#define SB_PCIE_PORT1_DEVID 0x7820 +#define SB_PCIE_PORT2_DEVID 0x7821 +#define SB_PCIE_PORT3_DEVID 0x7822 +#define SB_PCIE_PORT4_DEVID 0x7823 +#define SB_PCIE_PORT1_DEVFN PCI_DEVFN(SB_PCIE_DEV,SB_PCIE_PORT1_FUNC) +#define SB_PCIE_PORT2_DEVFN PCI_DEVFN(SB_PCIE_DEV,SB_PCIE_PORT2_FUNC) +#define SB_PCIE_PORT3_DEVFN PCI_DEVFN(SB_PCIE_DEV,SB_PCIE_PORT3_FUNC) +#define SB_PCIE_PORT4_DEVFN PCI_DEVFN(SB_PCIE_DEV,SB_PCIE_PORT4_FUNC) +#endif + +#endif /* _AGESA_HUDSON_PCI_DEVS_H_ */ diff --git a/src/southbridge/amd/amd_pci_util.c b/src/southbridge/amd/amd_pci_util.c new file mode 100644 index 0000000..3686d97 --- /dev/null +++ b/src/southbridge/amd/amd_pci_util.c @@ -0,0 +1,240 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include "amd_pci_util.h" +#include <pc80/i8259.h> + +#ifndef __PRE_RAM__ + +#if IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) +const char * intr_types[] = { + [0x00] = "INTA#\t", "INTB#\t", "INTC#\t", "INTD#\t", + [0x04] = "ACPI\t", "SMBUS\t", "RSVD\t", "RSVD\t", "RSVD\t", + [0x09] = "INTE#\t", "INTF#\t", "INTG#\t", "INTH#\t", +}; +#elif IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB800) || \ + IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB900) +const char * intr_types[] = { + [0x00] = "INTA#\t", "INTB#\t", "INTC#\t", "INTD#\t", "INTE#\t", "INTF#\t", "INTG#\t", "INTH#\t", + [0x08] = "Misc\t", "Misc0\t", "Misc1\t", "Misc2\t", "Ser IRQ INTA", "Ser IRQ INTB", "Ser IRQ INTC", "Ser IRQ INTD", + [0x10] = "SCI\t", "SMBUS0\t", "ASF\t", "HDA\t", "FC\t\t", "GEC\t", "PerMon\t", + [0x20] = "IMC INT0\t", "IMC INT1\t", "IMC INT2\t", "IMC INT3\t", "IMC INT4\t", "IMC INT5\t", + [0x30] = "Dev18.0 INTA", "Dev18.2 INTB", "Dev19.0 INTA", "Dev19.2 INTB", "Dev22.0 INTA", "Dev22.2 INTB", "Dev20.5 INTC", + [0x40] = "IDE\t", "SATA\t", + [0x50] = "GPPInt0\t", "GPPInt1\t", "GPPInt2\t", "GPPInt3\t" +}; +#elif IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_AGESA_HUDSON) +const char * intr_types[] = { + [0x00] = "INTA#\t", "INTB#\t", "INTC#\t", "INTD#\t", "INTE#\t", "INTF#\t", "INTG#\t", "INTH#\t", + [0x08] = "Misc\t", "Misc0\t", "Misc1\t", "Misc2\t", "Ser IRQ INTA", "Ser IRQ INTB", "Ser IRQ INTC", "Ser IRQ INTD", + [0x10] = "SCI\t", "SMBUS0\t", "ASF\t", "HDA\t", "SD\t\t", "GEC\t", "PerMon\t", + [0x20] = "IMC INT0\t", "IMC INT1\t", "IMC INT2\t", "IMC INT3\t", "IMC INT4\t", "IMC INT5\t", + [0x30] = "Dev18.0 INTA", "Dev18.2 INTB", "Dev19.0 INTA", "Dev19.2 INTB", "Dev22.0 INTA", "Dev22.2 INTB", "Dev20.5 INTC", + [0x40] = "IDE\t", "SATA\t", + [0x50] = "GPPInt0\t", "GPPInt1\t", "GPPInt2\t", "GPPInt3\t" +}; +#elif IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_AGESA_YANGTZE) +const char * intr_types[] = { + [0x00] = "INTA#\t", "INTB#\t", "INTC#\t", "INTD#\t", "INTE#\t", "INTF#\t", "INTG#\t", "INTH#\t", + [0x08] = "Misc\t", "Misc0\t", "Misc1\t", "Misc2\t", "Ser IRQ INTA", "Ser IRQ INTB", "Ser IRQ INTC", "Ser IRQ INTD", + [0x10] = "SCI\t", "SMBUS0\t", "ASF\t", "HDA\t", "FC\t\t", "GEC\t", "PerMon\t", "SD\t", + [0x20] = "IMC INT0\t", "IMC INT1\t", "IMC INT2\t", "IMC INT3\t", "IMC INT4\t", "IMC INT5\t", + [0x30] = "Dev18.0 INTA", "Dev18.2 INTB", "Dev19.0 INTA", "Dev19.2 INTB", "Dev22.0 INTA", "Dev22.2 INTB", + [0x40] = "RSVD\t", "SATA\t", +}; +#endif + +const struct pirq_struct * pirq_data_ptr = NULL; +u32 pirq_data_size = 0; +const u8 * intr_data_ptr = NULL; +const u8 * picr_data_ptr = NULL; + +/* + * Read the FCH PCI_INTR registers 0xC00/0xC01 at a + * given index and a given PIC (0) or IOAPIC (1) mode + */ +u8 read_pci_int_idx(u8 index, int mode) +{ + outb((mode << 7) | index, PCI_INTR_INDEX); + return inb(PCI_INTR_DATA); +} + +/* + * Write a value to the FCH PCI_INTR registers 0xC00/0xC01 + * at a given index and PIC (0) or IOAPIC (1) mode + */ +void write_pci_int_idx(u8 index, int mode, u8 data) +{ + outb((mode << 7) | index, PCI_INTR_INDEX); + outb(data, PCI_INTR_DATA); +} + +/* + * Write the FCH PCI_INTR registers 0xC00/0xC01 with values + * given in global variables intr_data and picr_data. + * These variables are defined in mainboard.c + */ +void write_pci_int_table (void) +{ + u8 byte; + + if(picr_data_ptr == NULL || intr_data_ptr == NULL){ + printk(BIOS_ERR, "Warning: Can't write PCI_INTR 0xC00/0xC01 registers because\n" + "'mainboard_picr_data' or 'mainboard_intr_data' tables are NULL\n"); + return; + } + + /* PIC IRQ routine */ + printk(BIOS_DEBUG, "PCI_INTR tables: Writing registers C00/C01 for PIC mode PCI IRQ routing:\n" + "\tPCI_INTR_INDEX\t\tPCI_INTR_DATA\n"); + for (byte = 0; byte < FCH_INT_TABLE_SIZE; byte++) { + if (intr_types[byte]) { + write_pci_int_idx(byte, 0, (u8) picr_data_ptr[byte]); + printk(BIOS_DEBUG, "\t0x%02X %s\t: 0x%02X\n", + byte, intr_types[byte], read_pci_int_idx(byte, 0)); + } + } + + /* APIC IRQ routine */ + printk(BIOS_DEBUG, "PCI_INTR tables: Writing registers C00/C01 for APIC mode PCI IRQ routing:\n" + "\tPCI_INTR_INDEX\t\tPCI_INTR_DATA\n"); + for (byte = 0; byte < FCH_INT_TABLE_SIZE; byte++) { + if (intr_types[byte]) { + write_pci_int_idx(byte, 1, (u8) intr_data_ptr[byte]); + printk(BIOS_DEBUG, "\t0x%02X %s\t: 0x%02X\n", + byte, intr_types[byte], read_pci_int_idx(byte, 1)); + } + } +} + +/* + * Function to write the PCI config space Interrupt + * registers based on the values given in PCI_INTR + * table at I/O port 0xC00/0xC01 + */ +void write_pci_cfg_irqs(void) +{ + device_t dev = NULL; /* Our current device to route IRQs to */ + device_t target_dev = NULL; /* The bridge that a device may be connected to */ + u16 int_pin = 0; /* Value of the INT_PIN register 0x3D */ + u16 target_pin = 0; /* Pin we will search our tables for */ + u16 int_line = 0; /* IRQ number read from PCI_INTR table and programmed to INT_LINE reg 0x3C */ + u16 pci_intr_idx = 0; /* Index into PCI_INTR table, 0xC00/0xC01 */ + u8 bus = 0; /* A PCI Device Bus number */ + u16 devfn = 0; /* A PCI Device and Function number */ + u8 bridged_device = 0; /* This device is on a PCI bridge */ + u32 i = 0; + + if (pirq_data_ptr == NULL) { + printk(BIOS_WARNING, "Warning: Can't write PCI IRQ assignments because" + " 'mainboard_pirq_data' structure does not exist\n"); + return; + } + + /* Populate the PCI cfg space header with the IRQ assignment */ + printk(BIOS_DEBUG, "PCI_CFG IRQ: Write PCI config space IRQ assignments\n"); + + for (dev = all_devices; dev; dev = dev->next) { + /* + * Step 1: Get the INT_PIN and device structure to look for in the + * PCI_INTR table pirq_data + */ + target_dev = NULL; + target_pin = get_pci_irq_pins(dev, &target_dev); + if (target_dev == NULL) + continue; + + if (target_pin < 1) + continue; + + /* Get the original INT_PIN for record keeping */ + int_pin = pci_read_config8(dev, PCI_INTERRUPT_PIN); + if (int_pin < 1 || int_pin > 4) + continue; /* Device has invalid INT_PIN so skip it */ + + bus = target_dev->bus->secondary; + devfn = target_dev->path.pci.devfn; + + /* + * Step 2: Use the INT_PIN and DevFn number to find the PCI_INTR + * register (0xC00) index for this device + */ + pci_intr_idx = 0xBAD; /* Will check to make sure it changed */ + for (i = 0; i < pirq_data_size; i++) { + if (pirq_data_ptr[i].devfn != devfn) + continue; + + /* PIN_A is index 0 in pirq_data array but 1 in PCI cfg reg */ + pci_intr_idx = pirq_data_ptr[i].PIN[target_pin - 1]; + printk(BIOS_SPEW, "\tFound this device in pirq_data table entry %d\n", i); + break; + } + + /* + * Step 3: Make sure we got a valid index and use it to get + * the IRQ number from the PCI_INTR register table + */ + if (pci_intr_idx == 0xBAD) { /* Not on a bridge or in pirq_data table, skip it */ + printk(BIOS_SPEW, "PCI Devfn (0x%x) not found in pirq_data table\n", devfn); + continue; + } else if (pci_intr_idx == 0x1F) { /* Index found is not defined */ + printk(BIOS_SPEW, "Got index 0x1F (Not Connected), perhaps this device was defined wrong?\n"); + continue; + } else if (pci_intr_idx >= FCH_INT_TABLE_SIZE) { /* Index out of bounds */ + printk(BIOS_ERR, "%s: got 0xC00/0xC01 table index 0x%x, max is 0x%x\n", + __func__, pci_intr_idx, FCH_INT_TABLE_SIZE); + continue; + } + + /* Find the value to program into the INT_LINE register from the PCI_INTR registers */ + int_line = read_pci_int_idx(pci_intr_idx, 0); + if (int_line == PIRQ_NC) { /* The IRQ found is disabled */ + printk(BIOS_SPEW, "Got IRQ 0x1F (disabled), perhaps this device was defined wrong?\n"); + continue; + } + + /* + * Step 4: Program the INT_LINE register in this device's + * PCI config space with the IRQ number we found in step 3 + * and make it Level Triggered + */ + pci_write_config8(dev, PCI_INTERRUPT_LINE, int_line); + + /* Set this IRQ to level triggered since it is used by a PCI device */ + i8259_configure_irq_trigger(int_line, IRQ_LEVEL_TRIGGERED); + + /* + * Step 5: Print out debug info and move on to next device + */ + printk(BIOS_SPEW, "\tOrig INT_PIN\t: %d (%s)\n", + int_pin, pin_to_str(int_pin)); + if (bridged_device) + printk(BIOS_SPEW, "\tSwizzled to\t: %d (%s)\n", + target_pin, pin_to_str(target_pin)); + printk(BIOS_SPEW, "\tPCI_INTR idx\t: 0x%02x (%s)\n" + "\tINT_LINE\t: 0x%X (IRQ %d)\n", + pci_intr_idx, intr_types[pci_intr_idx], int_line, int_line); + } /* for (dev = all_devices) */ + printk(BIOS_DEBUG, "PCI_CFG IRQ: Finished writing PCI config space IRQ assignments\n"); +} +#endif /* __PRE_RAM__ */ diff --git a/src/southbridge/amd/amd_pci_util.h b/src/southbridge/amd/amd_pci_util.h new file mode 100644 index 0000000..3bf81b6 --- /dev/null +++ b/src/southbridge/amd/amd_pci_util.h @@ -0,0 +1,205 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef AMD_PCI_UTIL_H +#define AMD_PCI_UTIL_H + +#include <stdint.h> + +/* + * PIRQ and device routing - these define the index + * into the FCH PCI_INTR 0xC00/0xC01 interrupt + * routing table + */ +#if IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB800) || \ + IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB900) +#define FCH_INT_TABLE_SIZE 0x54 +#define PIRQ_NC 0x1F /* Not Used */ +#define PIRQ_A 0x00 /* INT A */ +#define PIRQ_B 0x01 /* INT B */ +#define PIRQ_C 0x02 /* INT C */ +#define PIRQ_D 0x03 /* INT D */ +#define PIRQ_E 0x04 /* INT E */ +#define PIRQ_F 0x05 /* INT F */ +#define PIRQ_G 0x06 /* INT G */ +#define PIRQ_H 0x07 /* INT H */ +#define PIRQ_MISC 0x08 /* Miscellaneous IRQ Settings - See FCH Spec */ +#define PIRQ_MISC0 0x09 /* Miscellaneous0 IRQ Settings */ +#define PIRQ_MISC1 0x0A /* Miscellaneous1 IRQ Settings */ +#define PIRQ_MISC2 0x0B /* Miscellaneous2 IRQ Settings */ +#define PIRQ_SIRQA 0x0C /* Serial IRQ INTA */ +#define PIRQ_SIRQB 0x0D /* Serial IRQ INTA */ +#define PIRQ_SIRQC 0x0E /* Serial IRQ INTA */ +#define PIRQ_SIRQD 0x0F /* Serial IRQ INTA */ +#define PIRQ_SCI 0x10 /* SCI IRQ */ +#define PIRQ_SMBUS 0x11 /* SMBUS 14h.0 */ +#define PIRQ_ASF 0x12 /* ASF */ +#define PIRQ_HDA 0x13 /* HDA 14h.2 */ +#define PIRQ_FC 0x14 /* FC */ +#define PIRQ_GEC 0x15 /* GEC */ +#define PIRQ_PMON 0x16 /* Performance Monitor */ +#define PIRQ_IMC0 0x20 /* IMC INT0 */ +#define PIRQ_IMC1 0x21 /* IMC INT1 */ +#define PIRQ_IMC2 0x22 /* IMC INT2 */ +#define PIRQ_IMC3 0x23 /* IMC INT3 */ +#define PIRQ_IMC4 0x24 /* IMC INT4 */ +#define PIRQ_IMC5 0x25 /* IMC INT5 */ +#define PIRQ_OHCI1 0x30 /* USB OHCI 12h.0 */ +#define PIRQ_EHCI1 0x31 /* USB EHCI 12h.2 */ +#define PIRQ_OHCI2 0x32 /* USB OHCI 13h.0 */ +#define PIRQ_EHCI2 0x33 /* USB EHCI 13h.2 */ +#define PIRQ_OHCI3 0x34 /* USB OHCI 16h.0 */ +#define PIRQ_EHCI3 0x35 /* USB EHCI 16h.2 */ +#define PIRQ_OHCI4 0x36 /* USB OHCI 14h.5 */ +#define PIRQ_IDE 0x40 /* IDE 14h.1 */ +#define PIRQ_SATA 0x41 /* SATA 11h.0 */ +#define PIRQ_GPP0 0x50 /* GPP INT 0 */ +#define PIRQ_GPP1 0x51 /* GPP INT 1 */ +#define PIRQ_GPP2 0x52 /* GPP INT 2 */ +#define PIRQ_GPP3 0x53 /* GPP INT 3 */ +#endif + +#if IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) +#define FCH_INT_TABLE_SIZE 0xD +#define PIRQ_NC 0x1F /* Not Used */ +#define PIRQ_A 0x00 /* INT A */ +#define PIRQ_B 0x01 /* INT B */ +#define PIRQ_C 0x02 /* INT C */ +#define PIRQ_D 0x03 /* INT D */ +#define PIRQ_ACPI 0x04 /* ACPI */ +#define PIRQ_SMBUS 0x05 /* SMBUS */ +/* Index 6, 7, 8 are all reserved */ +#define PIRQ_E 0x09 /* INT E */ +#define PIRQ_F 0x0A /* INT F */ +#define PIRQ_G 0x0B /* INT G */ +#define PIRQ_H 0x0C /* INT H */ +#endif + +#if IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_AGESA_HUDSON) +#define FCH_INT_TABLE_SIZE 0x54 +#define PIRQ_NC 0x1F /* Not Used */ +#define PIRQ_A 0x00 /* INT A */ +#define PIRQ_B 0x01 /* INT B */ +#define PIRQ_C 0x02 /* INT C */ +#define PIRQ_D 0x03 /* INT D */ +#define PIRQ_E 0x04 /* INT E */ +#define PIRQ_F 0x05 /* INT F */ +#define PIRQ_G 0x06 /* INT G */ +#define PIRQ_H 0x07 /* INT H */ +#define PIRQ_MISC 0x08 /* Miscellaneous IRQ Settings - See FCH Spec */ +#define PIRQ_MISC0 0x09 /* Miscellaneous0 IRQ Settings */ +#define PIRQ_MISC1 0x0A /* Miscellaneous1 IRQ Settings */ +#define PIRQ_MISC2 0x0B /* Miscellaneous2 IRQ Settings */ +#define PIRQ_SIRQA 0x0C /* Serial IRQ INTA */ +#define PIRQ_SIRQB 0x0D /* Serial IRQ INTA */ +#define PIRQ_SIRQC 0x0E /* Serial IRQ INTA */ +#define PIRQ_SIRQD 0x0F /* Serial IRQ INTA */ +#define PIRQ_SCI 0x10 /* SCI IRQ */ +#define PIRQ_SMBUS 0x11 /* SMBUS 14h.0 */ +#define PIRQ_ASF 0x12 /* ASF */ +#define PIRQ_HDA 0x13 /* HDA 14h.2 */ +#define PIRQ_FC 0x14 /* FC */ +#define PIRQ_GEC 0x15 /* GEC */ +#define PIRQ_PMON 0x16 /* Performance Monitor */ +#define PIRQ_IMC0 0x20 /* IMC INT0 */ +#define PIRQ_IMC1 0x21 /* IMC INT1 */ +#define PIRQ_IMC2 0x22 /* IMC INT2 */ +#define PIRQ_IMC3 0x23 /* IMC INT3 */ +#define PIRQ_IMC4 0x24 /* IMC INT4 */ +#define PIRQ_IMC5 0x25 /* IMC INT5 */ +#define PIRQ_OHCI1 0x30 /* USB OHCI 12h.0 */ +#define PIRQ_EHCI1 0x31 /* USB EHCI 12h.2 */ +#define PIRQ_OHCI2 0x32 /* USB OHCI 13h.0 */ +#define PIRQ_EHCI2 0x33 /* USB EHCI 13h.2 */ +#define PIRQ_OHCI3 0x34 /* USB OHCI 16h.0 */ +#define PIRQ_EHCI3 0x35 /* USB EHCI 16h.2 */ +#define PIRQ_OHCI4 0x36 /* USB OHCI 14h.5 */ +#define PIRQ_IDE 0x40 /* IDE 14h.1 */ +#define PIRQ_SATA 0x41 /* SATA 11h.0 */ +#define PIRQ_SD 0x42 /* SD 14h.7 */ +#define PIRQ_GPP0 0x50 /* GPP INT 0 */ +#define PIRQ_GPP1 0x51 /* GPP INT 1 */ +#define PIRQ_GPP2 0x52 /* GPP INT 2 */ +#define PIRQ_GPP3 0x53 /* GPP INT 3 */ +#endif + +#if IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_AGESA_YANGTZE) +#define FCH_INT_TABLE_SIZE 0x42 +#define PIRQ_NC 0x1F /* Not Used */ +#define PIRQ_A 0x00 /* INT A */ +#define PIRQ_B 0x01 /* INT B */ +#define PIRQ_C 0x02 /* INT C */ +#define PIRQ_D 0x03 /* INT D */ +#define PIRQ_E 0x04 /* INT E */ +#define PIRQ_F 0x05 /* INT F */ +#define PIRQ_G 0x06 /* INT G */ +#define PIRQ_H 0x07 /* INT H */ +#define PIRQ_MISC 0x08 /* Miscellaneous IRQ Settings - See FCH Spec */ +#define PIRQ_MISC0 0x09 /* Miscellaneous0 IRQ Settings */ +#define PIRQ_MISC1 0x0A /* Miscellaneous1 IRQ Settings */ +#define PIRQ_MISC2 0x0B /* Miscellaneous2 IRQ Settings */ +#define PIRQ_SIRQA 0x0C /* Serial IRQ INTA */ +#define PIRQ_SIRQB 0x0D /* Serial IRQ INTA */ +#define PIRQ_SIRQC 0x0E /* Serial IRQ INTA */ +#define PIRQ_SIRQD 0x0F /* Serial IRQ INTA */ +#define PIRQ_SCI 0x10 /* SCI IRQ */ +#define PIRQ_SMBUS 0x11 /* SMBUS 14h.0 */ +#define PIRQ_ASF 0x12 /* ASF */ +#define PIRQ_HDA 0x13 /* HDA 14h.2 */ +#define PIRQ_FC 0x14 /* FC */ +#define PIRQ_PMON 0x16 /* Performance Monitor */ +#define PIRQ_SD 0x17 /* SD */ +#define PIRQ_IMC0 0x20 /* IMC INT0 */ +#define PIRQ_IMC1 0x21 /* IMC INT1 */ +#define PIRQ_IMC2 0x22 /* IMC INT2 */ +#define PIRQ_IMC3 0x23 /* IMC INT3 */ +#define PIRQ_IMC4 0x24 /* IMC INT4 */ +#define PIRQ_IMC5 0x25 /* IMC INT5 */ +#define PIRQ_OHCI1 0x30 /* USB OHCI 12h.0 */ +#define PIRQ_EHCI1 0x31 /* USB EHCI 12h.2 */ +#define PIRQ_OHCI2 0x32 /* USB OHCI 13h.0 */ +#define PIRQ_EHCI2 0x33 /* USB EHCI 13h.2 */ +#define PIRQ_OHCI3 0x34 /* USB OHCI 16h.0 */ +#define PIRQ_EHCI3 0x35 /* USB EHCI 16h.2 */ +#define PIRQ_SATA 0x41 /* SATA 11h.0 */ +#endif + +/* FCH index/data registers */ +#define PCI_INTR_INDEX 0xc00 +#define PCI_INTR_DATA 0xc01 + +#ifndef __PRE_RAM__ + +struct pirq_struct { + u8 devfn; + u8 PIN[4]; /* PINA/B/C/D are index 0/1/2/3 */ +}; + +extern const struct pirq_struct * pirq_data_ptr; +extern u32 pirq_data_size; +extern const u8 * intr_data_ptr; +extern const u8 * picr_data_ptr; + +u8 read_pci_int_idx(u8 index, int mode); +void write_pci_int_idx(u8 index, int mode, u8 data); +void write_pci_cfg_irqs(void); +void write_pci_int_table (void); +#endif /* __PRE_RAM */ + +#endif /* AMD_PCI_UTIL_H */ diff --git a/src/southbridge/amd/cimx/cimx_util.c b/src/southbridge/amd/cimx/cimx_util.c index 5d9276f..7909b68 100644 --- a/src/southbridge/amd/cimx/cimx_util.c +++ b/src/southbridge/amd/cimx/cimx_util.c @@ -21,204 +21,7 @@ #include <console/console.h> #include <device/pci.h> #include <arch/io.h> -#include <string.h> #include "cimx_util.h" -#include <pc80/i8259.h> - -#ifndef __PRE_RAM__ -#if IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB800) || \ - IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB900) -const char * intr_types[] = { - [0x00] = "INTA#\t", "INTB#\t", "INTC#\t", "INTD#\t", "INTE#\t", "INTF#\t", "INTG#\t", "INTH#\t", - [0x08] = "Misc\t", "Misc0\t", "Misc1\t", "Misc2\t", "Ser IRQ INTA", "Ser IRQ INTB", "Ser IRQ INTC", "Ser IRQ INTD", - [0x10] = "SCI\t", "SMBUS0\t", "ASF\t", "HDA\t", "FC\t\t", "GEC\t", "PerMon\t", - [0x20] = "IMC INT0\t", "IMC INT1\t", "IMC INT2\t", "IMC INT3\t", "IMC INT4\t", "IMC INT5\t", - [0x30] = "Dev18.0 INTA", "Dev18.2 INTB", "Dev19.0 INTA", "Dev19.2 INTB", "Dev22.0 INTA", "Dev22.2 INTB", "Dev20.5 INTC", - [0x40] = "IDE\t", "SATA\t", - [0x50] = "GPPInt0\t", "GPPInt1\t", "GPPInt2\t", "GPPInt3\t" -}; -#elif IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) -const char * intr_types[] = { - [0x00] = "INTA#\t", "INTB#\t", "INTC#\t", "INTD#\t", - [0x04] = "ACPI\t", "SMBUS\t", "RSVD\t", "RSVD\t", "RSVD\t", - [0x09] = "INTE#\t", "INTF#\t", "INTG#\t", "INTH#\t", -}; -#endif - -const struct pirq_struct * pirq_data_ptr = NULL; -u32 pirq_data_size = 0; -const u8 * intr_data_ptr = NULL; -const u8 * picr_data_ptr = NULL; - -/* - * Read the FCH PCI_INTR registers 0xC00/0xC01 at a - * given index and a given PIC (0) or IOAPIC (1) mode - */ -u8 read_pci_int_idx(u8 index, int mode) -{ - outb((mode << 7) | index, PCI_INTR_INDEX); - return inb(PCI_INTR_DATA); -} - -/* - * Write a value to the FCH PCI_INTR registers 0xC00/0xC01 - * at a given index and PIC (0) or IOAPIC (1) mode - */ -void write_pci_int_idx(u8 index, int mode, u8 data) -{ - outb((mode << 7) | index, PCI_INTR_INDEX); - outb(data, PCI_INTR_DATA); -} - -/* - * Write the FCH PCI_INTR registers 0xC00/0xC01 with values - * given in global variables intr_data and picr_data. - * These variables are defined in mainboard.c - */ -void write_pci_int_table (void) -{ - u8 byte; - - if(picr_data_ptr == NULL || intr_data_ptr == NULL){ - printk(BIOS_ERR, "Warning: Can't write PCI_INTR 0xC00/0xC01 registers because\n" - "'mainboard_picr_data' or 'mainboard_intr_data' tables are NULL\n"); - return; - } - - /* PIC IRQ routine */ - printk(BIOS_DEBUG, "PCI_INTR tables: Writing registers C00/C01 for PIC mode PCI IRQ routing:\n" - "\tPCI_INTR_INDEX\t\tPCI_INTR_DATA\n"); - for (byte = 0; byte < FCH_INT_TABLE_SIZE; byte++) { - if (intr_types[byte]) { - write_pci_int_idx(byte, 0, (u8) picr_data_ptr[byte]); - printk(BIOS_DEBUG, "\t0x%02X %s\t: 0x%02X\n", - byte, intr_types[byte], read_pci_int_idx(byte, 0)); - } - } - - /* APIC IRQ routine */ - printk(BIOS_DEBUG, "PCI_INTR tables: Writing registers C00/C01 for APIC mode PCI IRQ routing:\n" - "\tPCI_INTR_INDEX\t\tPCI_INTR_DATA\n"); - for (byte = 0; byte < FCH_INT_TABLE_SIZE; byte++) { - if (intr_types[byte]) { - write_pci_int_idx(byte, 1, (u8) intr_data_ptr[byte]); - printk(BIOS_DEBUG, "\t0x%02X %s\t: 0x%02X\n", - byte, intr_types[byte], read_pci_int_idx(byte, 1)); - } - } -} - -/* - * Function to write the PCI config space Interrupt - * registers based on the values given in PCI_INTR - * table at I/O port 0xC00/0xC01 - */ -void write_pci_cfg_irqs(void) -{ - device_t dev = NULL; /* Our current device to route IRQs to */ - device_t target_dev = NULL; /* The bridge that a device may be connected to */ - u16 int_pin = 0; /* Value of the INT_PIN register 0x3D */ - u16 target_pin = 0; /* Pin we will search our tables for */ - u16 int_line = 0; /* IRQ number read from PCI_INTR table and programmed to INT_LINE reg 0x3C */ - u16 pci_intr_idx = 0; /* Index into PCI_INTR table, 0xC00/0xC01 */ - u8 bus = 0; /* A PCI Device Bus number */ - u16 devfn = 0; /* A PCI Device and Function number */ - u8 bridged_device = 0; /* This device is on a PCI bridge */ - u32 i = 0; - - if (pirq_data_ptr == NULL) { - printk(BIOS_WARNING, "Warning: Can't write PCI IRQ assignments because" - " 'mainboard_pirq_data' structure does not exist\n"); - return; - } - - /* Populate the PCI cfg space header with the IRQ assignment */ - printk(BIOS_DEBUG, "PCI_CFG IRQ: Write PCI config space IRQ assignments\n"); - - for (dev = all_devices; dev; dev = dev->next) { - /* - * Step 1: Get the INT_PIN and device structure to look for in the - * PCI_INTR table pirq_data - */ - target_dev = NULL; - target_pin = get_pci_irq_pins(dev, &target_dev); - if (target_dev == NULL) - continue; - - if (target_pin < 1) - continue; - - /* Get the original INT_PIN for record keeping */ - int_pin = pci_read_config8(dev, PCI_INTERRUPT_PIN); - if (int_pin < 1 || int_pin > 4) - continue; /* Device has invalid INT_PIN so skip it */ - - bus = target_dev->bus->secondary; - devfn = target_dev->path.pci.devfn; - - /* - * Step 2: Use the INT_PIN and DevFn number to find the PCI_INTR - * register (0xC00) index for this device - */ - pci_intr_idx = 0xBAD; /* Will check to make sure it changed */ - for (i = 0; i < pirq_data_size; i++) { - if (pirq_data_ptr[i].devfn != devfn) - continue; - - /* PIN_A is index 0 in pirq_data array but 1 in PCI cfg reg */ - pci_intr_idx = pirq_data_ptr[i].PIN[target_pin - 1]; - printk(BIOS_SPEW, "\tFound this device in pirq_data table entry %d\n", i); - break; - } - - /* - * Step 3: Make sure we got a valid index and use it to get - * the IRQ number from the PCI_INTR register table - */ - if (pci_intr_idx == 0xBAD) { /* Not on a bridge or in pirq_data table, skip it */ - printk(BIOS_SPEW, "PCI Devfn (0x%x) not found in pirq_data table\n", devfn); - continue; - } else if (pci_intr_idx == 0x1F) { /* Index found is not defined */ - printk(BIOS_SPEW, "Got index 0x1F (Not Connected), perhaps this device was defined wrong?\n"); - continue; - } else if (pci_intr_idx >= FCH_INT_TABLE_SIZE) { /* Index out of bounds */ - printk(BIOS_ERR, "%s: got 0xC00/0xC01 table index 0x%x, max is 0x%x\n", - __func__, pci_intr_idx, FCH_INT_TABLE_SIZE); - continue; - } - - /* Find the value to program into the INT_LINE register from the PCI_INTR registers */ - int_line = read_pci_int_idx(pci_intr_idx, 0); - if (int_line == PIRQ_NC) { /* The IRQ found is disabled */ - printk(BIOS_SPEW, "Got IRQ 0x1F (disabled), perhaps this device was defined wrong?\n"); - continue; - } - - /* - * Step 4: Program the INT_LINE register in this device's - * PCI config space with the IRQ number we found in step 3 - * and make it Level Triggered - */ - pci_write_config8(dev, PCI_INTERRUPT_LINE, int_line); - - /* Set this IRQ to level triggered since it is used by a PCI device */ - i8259_configure_irq_trigger(int_line, IRQ_LEVEL_TRIGGERED); - - /* - * Step 5: Print out debug info and move on to next device - */ - printk(BIOS_SPEW, "\tOrig INT_PIN\t: %d (%s)\n", - int_pin, pin_to_str(int_pin)); - if (bridged_device) - printk(BIOS_SPEW, "\tSwizzled to\t: %d (%s)\n", - target_pin, pin_to_str(target_pin)); - printk(BIOS_SPEW, "\tPCI_INTR idx\t: 0x%02x (%s)\n" - "\tINT_LINE\t: 0x%X (IRQ %d)\n", - pci_intr_idx, intr_types[pci_intr_idx], int_line, int_line); - } /* for (dev = all_devices) */ - printk(BIOS_DEBUG, "PCI_CFG IRQ: Finished writing PCI config space IRQ assignments\n"); -} -#endif /* __PRE_RAM__ */
static void pmio_write_index(u16 port_base, u8 reg, u8 value) { diff --git a/src/southbridge/amd/cimx/cimx_util.h b/src/southbridge/amd/cimx/cimx_util.h index 8413251..a16091a 100644 --- a/src/southbridge/amd/cimx/cimx_util.h +++ b/src/southbridge/amd/cimx/cimx_util.h @@ -23,73 +23,6 @@
#include <stdint.h>
-/* - * PIRQ and device routing - these define the index - * into the FCH PCI_INTR 0xC00/0xC01 interrupt - * routing table - */ -#if IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB800) || \ - IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB900) -#define FCH_INT_TABLE_SIZE 0x54 -#define PIRQ_NC 0x1F /* Not Used */ -#define PIRQ_A 0x00 /* INT A */ -#define PIRQ_B 0x01 /* INT B */ -#define PIRQ_C 0x02 /* INT C */ -#define PIRQ_D 0x03 /* INT D */ -#define PIRQ_E 0x04 /* INT E */ -#define PIRQ_F 0x05 /* INT F */ -#define PIRQ_G 0x06 /* INT G */ -#define PIRQ_H 0x07 /* INT H */ -#define PIRQ_MISC 0x08 /* Miscellaneous IRQ Settings - See FCH Spec */ -#define PIRQ_MISC0 0x09 /* Miscellaneous0 IRQ Settings */ -#define PIRQ_MISC1 0x0A /* Miscellaneous1 IRQ Settings */ -#define PIRQ_MISC2 0x0B /* Miscellaneous2 IRQ Settings */ -#define PIRQ_SIRQA 0x0C /* Serial IRQ INTA */ -#define PIRQ_SIRQB 0x0D /* Serial IRQ INTA */ -#define PIRQ_SIRQC 0x0E /* Serial IRQ INTA */ -#define PIRQ_SIRQD 0x0F /* Serial IRQ INTA */ -#define PIRQ_SCI 0x10 /* SCI IRQ */ -#define PIRQ_SMBUS 0x11 /* SMBUS 14h.0 */ -#define PIRQ_ASF 0x12 /* ASF */ -#define PIRQ_HDA 0x13 /* HDA 14h.2 */ -#define PIRQ_FC 0x14 /* FC */ -#define PIRQ_GEC 0x15 /* GEC */ -#define PIRQ_PMON 0x16 /* Performance Monitor */ -#define PIRQ_IMC0 0x20 /* IMC INT0 */ -#define PIRQ_IMC1 0x21 /* IMC INT1 */ -#define PIRQ_IMC2 0x22 /* IMC INT2 */ -#define PIRQ_IMC3 0x23 /* IMC INT3 */ -#define PIRQ_IMC4 0x24 /* IMC INT4 */ -#define PIRQ_IMC5 0x25 /* IMC INT5 */ -#define PIRQ_OHCI1 0x30 /* USB OHCI 12h.0 */ -#define PIRQ_EHCI1 0x31 /* USB EHCI 12h.2 */ -#define PIRQ_OHCI2 0x32 /* USB OHCI 13h.0 */ -#define PIRQ_EHCI2 0x33 /* USB EHCI 13h.2 */ -#define PIRQ_OHCI3 0x34 /* USB OHCI 16h.0 */ -#define PIRQ_EHCI3 0x35 /* USB EHCI 16h.2 */ -#define PIRQ_OHCI4 0x36 /* USB OHCI 14h.5 */ -#define PIRQ_IDE 0x40 /* IDE 14h.1 */ -#define PIRQ_SATA 0x41 /* SATA 11h.0 */ -#define PIRQ_GPP0 0x50 /* GPP INT 0 */ -#define PIRQ_GPP1 0x51 /* GPP INT 1 */ -#define PIRQ_GPP2 0x52 /* GPP INT 2 */ -#define PIRQ_GPP3 0x53 /* GPP INT 3 */ -#elif IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) -#define FCH_INT_TABLE_SIZE 0xD -#define PIRQ_NC 0x1F /* Not Used */ -#define PIRQ_A 0x00 /* INT A */ -#define PIRQ_B 0x01 /* INT B */ -#define PIRQ_C 0x02 /* INT C */ -#define PIRQ_D 0x03 /* INT D */ -#define PIRQ_ACPI 0x04 /* ACPI */ -#define PIRQ_SMBUS 0x05 /* SMBUS */ -/* Index 6, 7, 8 are all reserved */ -#define PIRQ_E 0x09 /* INT E */ -#define PIRQ_F 0x0A /* INT F */ -#define PIRQ_G 0x0B /* INT G */ -#define PIRQ_H 0x0C /* INT H */ -#endif - /* FCH index/data registers */ #define BIOSRAM_INDEX 0xcd4 #define BIOSRAM_DATA 0xcd5 @@ -105,22 +38,4 @@ u8 pm_ioread(u8 reg); void pm2_iowrite(u8 reg, u8 value); u8 pm2_ioread(u8 reg);
-#ifndef __PRE_RAM__ - -struct pirq_struct { -u8 devfn; -u8 PIN[4]; /* PINA/B/C/D are index 0/1/2/3 */ -}; - -extern const struct pirq_struct * pirq_data_ptr; -extern u32 pirq_data_size; -extern const u8 * intr_data_ptr; -extern const u8 * picr_data_ptr; - -u8 read_pci_int_idx(u8 index, int mode); -void write_pci_int_idx(u8 index, int mode, u8 data); -void write_pci_cfg_irqs(void); -void write_pci_int_table (void); -#endif /* __PRE_RAM */ - #endif /* CIMX_UTIL_H */ diff --git a/src/southbridge/amd/cimx/sb800/late.c b/src/southbridge/amd/cimx/sb800/late.c index f4c5fd4..d9da9a9 100644 --- a/src/southbridge/amd/cimx/sb800/late.c +++ b/src/southbridge/amd/cimx/sb800/late.c @@ -38,7 +38,7 @@ #include "sb_cimx.h" /* AMD CIMX wrapper entries */ #include "smbus.h" #include "fan.h" -#include <southbridge/amd/cimx/cimx_util.h> +#include <southbridge/amd/amd_pci_util.h>
/*implement in mainboard.c*/ void set_pcie_reset(void);