Attention is currently required from: Ravi Mistry.
Hello build bot (Jenkins),
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/69320
to look at the new patch set (#5).
Change subject: mb: Add HP Memphis-S (IPM87-MP) ......................................................................
mb: Add HP Memphis-S (IPM87-MP)
This is a µATX mainboard with an LGA1150 socket and two DDR3 DIMM slots.
Specs: - HP Memphis-S (IPM87-MP) - Intel H87 - Macronix MX25L6473E (8MB) - Fintek F71808A - Realtek RTL8111 compatible Gigabit
Tested with EDK2 payload to boot Fedora Linux 36.
Working: - PCIE slots (including MINI_CARD1) - USB 2.0, 3.0 - Both DIMM slots - SATA (except mSATA) - Ethernet - VGA, DVI (libgfxinit and VBT) - S0/S3/S5 - Audio - Hardware monitor
Untested: - mSATA - HOOD_SENSE - MINI_LED header - EHCI debug port, LPC debug - CMOS
Change-Id: If3162fa4c60374877d9e67e9e1f6121743f03b21 Signed-off-by: Ravi Mistry rvstry@protonmail.com --- A src/mainboard/hp/memphis-s/Kconfig A src/mainboard/hp/memphis-s/Kconfig.name A src/mainboard/hp/memphis-s/Makefile.inc A src/mainboard/hp/memphis-s/acpi/ec.asl A src/mainboard/hp/memphis-s/acpi/platform.asl A src/mainboard/hp/memphis-s/acpi/superio.asl A src/mainboard/hp/memphis-s/board_info.txt A src/mainboard/hp/memphis-s/bootblock.c A src/mainboard/hp/memphis-s/cmos.default A src/mainboard/hp/memphis-s/cmos.layout A src/mainboard/hp/memphis-s/data.vbt A src/mainboard/hp/memphis-s/devicetree.cb A src/mainboard/hp/memphis-s/dsdt.asl A src/mainboard/hp/memphis-s/gma-mainboard.ads A src/mainboard/hp/memphis-s/gpio.c A src/mainboard/hp/memphis-s/hda_verb.c A src/mainboard/hp/memphis-s/romstage.c 17 files changed, 655 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/20/69320/5