[coreboot-gerrit] Patch set updated for coreboot: 50dce9f hp/pavilion_m6_1035dx: Suspend/resume on lid close/open with ACPI

[Alexandru Gagniuc]

Alexandru Gagniuc ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5549

-gerrit

commit 50dce9f2688983d266bdd4a80ac717da5b2d3c21
Author: Alexandru Gagniuc 
Date:   Fri Apr 18 21:29:59 2014 -0500

hp/pavilion_m6_1035dx: Suspend/resume on lid close/open with ACPI

This patch completes ACPI support for the lid switch. The lid SCI now
    notifies the OSPM of the status change when the lid is closed or
    opened, allowing system to suspend. The wake source is also declares,
    and the system wakes when the lid is opened.

The system resumes successfully, but the display still does not come
    back on.

Change-Id: I803c4fc64e15f8d1a90791ec246af66604646d8b
    Signed-off-by: Alexandru Gagniuc 
---
 src/mainboard/hp/pavilion_m6_1035dx/acpi/gpe.asl       |  9 +++++++++
 src/mainboard/hp/pavilion_m6_1035dx/acpi/mainboard.asl | 17 +++++++++++++++++
 src/mainboard/hp/pavilion_m6_1035dx/dsdt.asl           |  2 ++
 3 files changed, 28 insertions(+)

diff --git a/src/mainboard/hp/pavilion_m6_1035dx/acpi/gpe.asl b/src/mainboard/hp/pavilion_m6_1035dx/acpi/gpe.asl
index 89c002a..596ac5c 100644
--- a/src/mainboard/hp/pavilion_m6_1035dx/acpi/gpe.asl
+++ b/src/mainboard/hp/pavilion_m6_1035dx/acpi/gpe.asl
@@ -54,6 +54,15 @@ Scope(_GPE) {	/* Start Scope GPE */
    	/* DBGO("\_GPE\_L11\n") */
    }

+	/* Lid switch opened or closed */
+	Method(_L16) {
+		Store("Lid status changed", Debug)
+		/* Flip trigger polarity */
+		Not(LPOL, LPOL)
+		/* Notify lid object of status change */
+		Notify (_SB.LID, 0x80);
+	}
+
    /*  GPIO0 or GEvent8 event  */
    Method(_L18) {
    	/* DBGO("\_GPE\_L18\n") */
diff --git a/src/mainboard/hp/pavilion_m6_1035dx/acpi/mainboard.asl b/src/mainboard/hp/pavilion_m6_1035dx/acpi/mainboard.asl
index 5700e86..4171700 100644
--- a/src/mainboard/hp/pavilion_m6_1035dx/acpi/mainboard.asl
+++ b/src/mainboard/hp/pavilion_m6_1035dx/acpi/mainboard.asl
@@ -57,6 +57,14 @@
    	GE22, 1,	/* General event 22 - connected to lid switch */
    }

+	/* SMI/SCI control block -- hardcoded to 0xfed80200 by AGESA */
+	OperationRegion (SMIX, SystemMemory, 0xfed80200, 0x100)
+	Field (SMIX, AnyAcc, NoLock, Preserve) {
+		Offset (0x08),	/* SCI level: 0 = active low, 1 = active high */
+		, 22,
+		LPOL, 1,	/* SCI22 trigger polarity - lid switch */
+	}
+
    /*
     * Used by EC code on certain events
     *
@@ -75,10 +83,19 @@ Scope (_SB) {
    Device (LID)
    {
    	Name(_HID, EisaId("PNP0C0D"))
+		Name(_PRW, Package () {EC_LID_GPE, 0x04}) /* wake from S1-S4 */
    	Method(_LID, 0)
    	{
    		Return (GE22)	/* GE pin 22 */
    	}
+
+		Method (_INI, 0)
+		{
+			/* Make sure lid trigger polarity is set so that we
+			 * trigger an SCI when lid status changes.
+			 */
+			Not(GE22, LPOL)
+		}
    }

Device (MB) {
diff --git a/src/mainboard/hp/pavilion_m6_1035dx/dsdt.asl b/src/mainboard/hp/pavilion_m6_1035dx/dsdt.asl
index c1f1933..4783394 100644
--- a/src/mainboard/hp/pavilion_m6_1035dx/dsdt.asl
+++ b/src/mainboard/hp/pavilion_m6_1035dx/dsdt.asl
@@ -18,6 +18,8 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  */

+#include "mainboard.h"
+
 /* DefinitionBlock Statement */
 DefinitionBlock (
    "DSDT.AML",		/* Output filename */