Felix Held has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/83910?usp=email )
Change subject: mb/cwwk/adl/devicetree: enable all USB ports ......................................................................
mb/cwwk/adl/devicetree: enable all USB ports
The cw-al-4l-v1.0 mainboard has two USB2 ports on a 2x5 pin header on the mainboard and likely also routes one USB2 port to the m.2 E key slot which is typically used for Bluetooth support when an E key m.2 WIFI + Bluetooth card is installed.
This is untested, since I only have the cw-al-4l-v2.0 mainboard, but from looking at the documentation of the version 1 and looking at how things are done on the version 2 this should be correct.
Signed-off-by: Felix Held felix-coreboot@felixheld.de Change-Id: I7059a3f2d9cde0086382a4484c09d5ef33dc906d --- M src/mainboard/cwwk/adl/devicetree.cb 1 file changed, 3 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/10/83910/1
diff --git a/src/mainboard/cwwk/adl/devicetree.cb b/src/mainboard/cwwk/adl/devicetree.cb index 15ec3b2..0963d8f 100644 --- a/src/mainboard/cwwk/adl/devicetree.cb +++ b/src/mainboard/cwwk/adl/devicetree.cb @@ -6,7 +6,10 @@ register "usb2_ports[1]" = "USB2_PORT_SHORT(OC_SKIP)" register "usb2_ports[2]" = "USB2_PORT_SHORT(OC_SKIP)" register "usb2_ports[3]" = "USB2_PORT_SHORT(OC_SKIP)" + register "usb2_ports[4]" = "USB2_PORT_SHORT(OC_SKIP)" + register "usb2_ports[5]" = "USB2_PORT_SHORT(OC_SKIP)" register "usb2_ports[6]" = "USB2_PORT_SHORT(OC_SKIP)" # microSD card reader + register "usb2_ports[7]" = "USB2_PORT_SHORT(OC_SKIP)"
register "pch_pcie_rp[PCH_RP(1)]" = "{ .clk_src = 0,