Duncan Laurie has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33450
Change subject: mb/google/sarien: Disable unused GPIOs ......................................................................
mb/google/sarien: Disable unused GPIOs
These 4 GPIOs are being disconnected in the next board so use the board ID to configure these pins as not connected to ensure they do not cause leakage.
Also remove the ACPI _PTS S5 code that was configuring the GPIOs. This does mean they will cause small leakage in S5 on existing boards, but it will not affect the new boards.
BUG=b:132393441 TEST=boot on sarien with fake board ID and ensure that coreboot configures these pads as expected.
Change-Id: I6ac04b9a635829811a09aeab7cba3bb58cfcff47 Signed-off-by: Duncan Laurie dlaurie@google.com --- M src/mainboard/google/sarien/ramstage.c M src/mainboard/google/sarien/variants/arcada/include/variant/acpi/mainboard.asl M src/mainboard/google/sarien/variants/sarien/include/variant/acpi/mainboard.asl 3 files changed, 12 insertions(+), 18 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/50/33450/1
diff --git a/src/mainboard/google/sarien/ramstage.c b/src/mainboard/google/sarien/ramstage.c index 1d22046..811afa1 100644 --- a/src/mainboard/google/sarien/ramstage.c +++ b/src/mainboard/google/sarien/ramstage.c @@ -14,6 +14,7 @@ */
#include <arch/acpi.h> +#include <boardid.h> #include <drivers/vpd/vpd.h> #include <smbios.h> #include <soc/gpio.h> @@ -60,6 +61,13 @@ } #endif
+static const struct pad_config gpio_unused[] = { +/* SUSWARN# */ PAD_NC(GPP_A13, NONE), +/* SUSACK# */ PAD_NC(GPP_A15, NONE), +/* M2_SKT2_CFG0 */ PAD_NC(GPP_H12, NONE), +/* M2_SKT2_CFG1 */ PAD_NC(GPP_H13, NONE), +}; + void mainboard_silicon_init_params(FSP_S_CONFIG *params) { const struct pad_config *gpio_table; @@ -67,6 +75,10 @@
gpio_table = variant_gpio_table(&num_gpios); cnl_configure_pads(gpio_table, num_gpios); + + /* Disable unused pads for devices with board ID > 2 */ + if (board_id() > 2) + gpio_configure_pads(gpio_unused, ARRAY_SIZE(gpio_unused)); }
static void mainboard_enable(struct device *dev) diff --git a/src/mainboard/google/sarien/variants/arcada/include/variant/acpi/mainboard.asl b/src/mainboard/google/sarien/variants/arcada/include/variant/acpi/mainboard.asl index 4b05ba8..41121d2 100644 --- a/src/mainboard/google/sarien/variants/arcada/include/variant/acpi/mainboard.asl +++ b/src/mainboard/google/sarien/variants/arcada/include/variant/acpi/mainboard.asl @@ -15,8 +15,6 @@
#define CAM_EN GPP_B11 /* Active low */ #define TS_PD GPP_E7 -#define SSD_EN GPP_H13 -#define SSD_RST GPP_H12
/* Method called from LPIT prior to enter s0ix state */ Method (MS0X, 1) @@ -37,13 +35,6 @@
/* Clear touch screen pd pin to avoid leakage */ _SB.PCI0.CTXS (TS_PD) - - /* Clear SSD EN adn RST pin to avoid leakage */ - If (Arg0 == 5) { - _SB.PCI0.CTXS (SSD_RST) - Sleep(1) - _SB.PCI0.CTXS (SSD_EN) - } }
/* Method called from _WAK prior to wakeup */ diff --git a/src/mainboard/google/sarien/variants/sarien/include/variant/acpi/mainboard.asl b/src/mainboard/google/sarien/variants/sarien/include/variant/acpi/mainboard.asl index 4b05ba8..41121d2 100644 --- a/src/mainboard/google/sarien/variants/sarien/include/variant/acpi/mainboard.asl +++ b/src/mainboard/google/sarien/variants/sarien/include/variant/acpi/mainboard.asl @@ -15,8 +15,6 @@
#define CAM_EN GPP_B11 /* Active low */ #define TS_PD GPP_E7 -#define SSD_EN GPP_H13 -#define SSD_RST GPP_H12
/* Method called from LPIT prior to enter s0ix state */ Method (MS0X, 1) @@ -37,13 +35,6 @@
/* Clear touch screen pd pin to avoid leakage */ _SB.PCI0.CTXS (TS_PD) - - /* Clear SSD EN adn RST pin to avoid leakage */ - If (Arg0 == 5) { - _SB.PCI0.CTXS (SSD_RST) - Sleep(1) - _SB.PCI0.CTXS (SSD_EN) - } }
/* Method called from _WAK prior to wakeup */