[coreboot-gerrit] Change in ...coreboot[master]: sb/intel/lynxpoint/acpi/serialio.asl: [test] support FixedDMA

[HAOUAS Elyes (Code Review)]

HAOUAS Elyes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/30130

Change subject: sb/intel/lynxpoint/acpi/serialio.asl: [test] support FixedDMA
......................................................................

sb/intel/lynxpoint/acpi/serialio.asl: [test] support FixedDMA

Change-Id: I90918c319088693e3cd970fbc69867ca7d34f17c
Signed-off-by: Elyes HAOUAS 
---
M src/southbridge/intel/lynxpoint/acpi/serialio.asl
1 file changed, 8 insertions(+), 12 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/30/30130/1

diff --git a/src/southbridge/intel/lynxpoint/acpi/serialio.asl b/src/southbridge/intel/lynxpoint/acpi/serialio.asl
index 9323b91..b7b5de6 100644
--- a/src/southbridge/intel/lynxpoint/acpi/serialio.asl
+++ b/src/southbridge/intel/lynxpoint/acpi/serialio.asl
@@ -178,9 +178,8 @@
    // DMA channels are only used if Serial IO DMA controller is enabled
    Name (DBUF, ResourceTemplate ()
    {
-		// TODO: Need to update IASL to support FixedDMA
-		//FixedDMA (0x18, 4, Width32Bit, DMA1) // Tx
-		//FixedDMA (0x19, 5, Width32Bit, DMA2) // Rx
+		FixedDMA (0x18, 4, Width32Bit, DMA1) // Tx
+		FixedDMA (0x19, 5, Width32Bit, DMA2) // Rx
    })

Method (_CRS, 0, NotSerialized)
@@ -260,9 +259,8 @@
    // DMA channels are only used if Serial IO DMA controller is enabled
    Name (DBUF, ResourceTemplate ()
    {
-		// TODO: Need to update IASL to support FixedDMA
-		//FixedDMA (0x1A, 6, Width32Bit, DMA1) // Tx
-		//FixedDMA (0x1B, 7, Width32Bit, DMA2) // Rx
+		FixedDMA (0x1A, 6, Width32Bit, DMA1) // Tx
+		FixedDMA (0x1B, 7, Width32Bit, DMA2) // Rx
    })

Method (_CRS, 0, NotSerialized)
@@ -377,9 +375,8 @@
    // DMA channels are only used if Serial IO DMA controller is enabled
    Name (DBUF, ResourceTemplate ()
    {
-		// TODO: Need to update IASL to support FixedDMA
-		//FixedDMA (0x10, 0, Width32Bit, DMA1) // Tx
-		//FixedDMA (0x11, 1, Width32Bit, DMA2) // Rx
+		FixedDMA (0x10, 0, Width32Bit, DMA1) // Tx
+		FixedDMA (0x11, 1, Width32Bit, DMA2) // Rx
    })

Method (_CRS, 0, NotSerialized)
@@ -428,9 +425,8 @@
    // DMA channels are only used if Serial IO DMA controller is enabled
    Name (DBUF, ResourceTemplate ()
    {
-		// TODO: Need to update IASL to support FixedDMA
-		//FixedDMA (0x16, 2, Width32Bit, DMA1) // Tx
-		//FixedDMA (0x17, 3, Width32Bit, DMA2) // Rx
+		FixedDMA (0x16, 2, Width32Bit, DMA1) // Tx
+		FixedDMA (0x17, 3, Width32Bit, DMA2) // Rx
    })

Method (_CRS, 0, NotSerialized)