Kyösti Mälkki (kyosti.malkki@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/6116
-gerrit
commit c72123a6fa5f4511959c330c06066ee63fb25054 Author: Dave Frodin dave.frodin@se-eng.com Date: Thu Jun 5 11:49:04 2014 -0600
hp/abm: Add new mainboard (incrementally)
The hp/abm board is used in network/server applications.
Notes: - The hp/abm board is headless and therefore does not define CONFIG_GFXUMA, and does not require a video bios. - The micro USB connector on the board edge is connected to COM4 (i.e. I/O=2E8h). Coreboot needs to be configured to use Index=3. - If you are using SeaBIOS it would also need to be configured to use the UART at I/O=2E8h. - This board has been tested with headless installed versions of Ubuntu 12.10 and Fedora 19.
Change-Id: I60bde98411c40a184c8d053199bac8d04df8ab07 Signed-off-by: Kyösti Mälkki kyosti.malkki@gmail.com --- src/mainboard/hp/abm/BiosCallOuts.c | 261 +------------------------- src/mainboard/hp/abm/BiosCallOuts.h | 1 + src/mainboard/hp/abm/Kconfig | 33 +--- src/mainboard/hp/abm/Makefile.inc | 1 + src/mainboard/hp/abm/OptionsIds.h | 5 +- src/mainboard/hp/abm/PlatformGnbPcie.c | 9 +- src/mainboard/hp/abm/PlatformGnbPcieComplex.h | 1 + src/mainboard/hp/abm/acpi/AmdImc.asl | 1 + src/mainboard/hp/abm/acpi/gpe.asl | 2 +- src/mainboard/hp/abm/acpi/mainboard.asl | 7 +- src/mainboard/hp/abm/acpi/routing.asl | 2 +- src/mainboard/hp/abm/acpi/sata.asl | 1 + src/mainboard/hp/abm/acpi/si.asl | 2 +- src/mainboard/hp/abm/acpi/sleep.asl | 2 +- src/mainboard/hp/abm/acpi/superio.asl | 2 +- src/mainboard/hp/abm/acpi/thermal.asl | 2 +- src/mainboard/hp/abm/acpi/usb_oc.asl | 4 +- src/mainboard/hp/abm/acpi_tables.c | 3 +- src/mainboard/hp/abm/agesawrapper.c | 40 +--- src/mainboard/hp/abm/agesawrapper.h | 34 +--- src/mainboard/hp/abm/buildOpts.c | 28 ++- src/mainboard/hp/abm/cmos.layout | 3 +- src/mainboard/hp/abm/devicetree.cb | 82 +++----- src/mainboard/hp/abm/dsdt.asl | 4 +- src/mainboard/hp/abm/get_bus_conf.c | 15 +- src/mainboard/hp/abm/irq_tables.c | 5 +- src/mainboard/hp/abm/mainboard.c | 93 ++++++++- src/mainboard/hp/abm/mptable.c | 3 +- src/mainboard/hp/abm/romstage.c | 53 +++--- 29 files changed, 227 insertions(+), 472 deletions(-)
diff --git a/src/mainboard/hp/abm/BiosCallOuts.c b/src/mainboard/hp/abm/BiosCallOuts.c index 9b1d489..9bede8c 100644 --- a/src/mainboard/hp/abm/BiosCallOuts.c +++ b/src/mainboard/hp/abm/BiosCallOuts.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,7 +18,6 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#include <device/azalia.h> #include "agesawrapper.h" #include "amdlib.h" #include "BiosCallOuts.h" @@ -26,6 +26,9 @@ #include "heapManager.h" #include "FchPlatform.h" #include "cbfs.h" +#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) +#include "imc.h" +#endif #include <stdlib.h>
const BIOS_CALLOUT_STRUCT BiosCallouts[] = @@ -46,257 +49,6 @@ const BIOS_CALLOUT_STRUCT BiosCallouts[] = const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
/** - * CODEC Initialization Table for Azalia HD Audio using Realtek ALC662 chip - */ -static const CODEC_ENTRY Alc662_VerbTbl[] = -{ - { 0x14, /*01014010*/ /* Port D - green headphone jack */ - (AZALIA_PINCFG_PORT_JACK << 30) - | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_REAR) << 24) - | (AZALIA_PINCFG_DEVICE_LINEOUT << 20) - | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16) - | (AZALIA_PINCFG_COLOR_GREEN << 12) - | (1 << 4) - | (0 << 0) - }, - { 0x15, /*0x90170120*/ /* Port A - white speaker header */ - (AZALIA_PINCFG_PORT_FIXED << 30) - | (AZALIA_PINCFG_LOCATION_INTERNAL << 24) - | (AZALIA_PINCFG_DEVICE_SPEAKER << 20) - | (AZALIA_PINCFG_CONN_OTHER_ANALOG << 16) - | (AZALIA_PINCFG_COLOR_WHITE << 12) - | (AZALIA_PINCFG_MISC_IGNORE_PRESENCE << 8) - | (2 << 4) - | (0 << 0) - }, - { 0x16, 0x411111F0 }, /* Port G - not connected */ - { 0x18, /*0x01A19040*/ /* Port B - pink headphone jack */ - (AZALIA_PINCFG_PORT_JACK << 30) - | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_REAR) << 24) - | (AZALIA_PINCFG_DEVICE_MICROPHONE << 20) - | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16) - | (AZALIA_PINCFG_COLOR_PINK << 12) - | (4 << 4) - | (0 << 0) - }, - { 0x19, /*0x02A19050*/ /* Port F - front panel header mic */ - (AZALIA_PINCFG_PORT_NC << 30) - | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_FRONT) << 24) - | (AZALIA_PINCFG_DEVICE_MICROPHONE << 20) - | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16) - | (AZALIA_PINCFG_COLOR_PINK << 12) - | (5 << 4) - | (0 << 0) - }, - { 0x1A, /*0x0181304F*/ /* Port C - NL blue headphone jack */ - (AZALIA_PINCFG_PORT_NC << 30) - | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_REAR) << 24) - | (AZALIA_PINCFG_DEVICE_LINEIN << 20) - | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16) - | (AZALIA_PINCFG_COLOR_BLUE << 12) - | (4 << 4) - | (0xF << 0) - }, - { 0x1B, /*0x02214030*/ /* Port E - front panel line-out */ - (AZALIA_PINCFG_PORT_NC << 30) - | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_FRONT) << 24) - | (AZALIA_PINCFG_DEVICE_HP_OUT << 20) - | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16) - | (AZALIA_PINCFG_COLOR_GREEN << 12) - | (3 << 4) - | (0 << 0) - }, - { 0x1C, 0x411111F0 }, /* CD-in - Not Connected */ - { 0x1D, 0x411111F0 }, /* PC Beep - Not Connected */ - { 0x1E, 0x411111F0 }, /* S/PDIF - Not connected */ - { 0xFF, 0xFFFFFFFF }, -}; - -static const CODEC_TBL_LIST CodecTableList[] = -{ - {0x10ec0662, (CODEC_ENTRY*)Alc662_VerbTbl}, - {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} -}; - -#define FAN_INPUT_INTERNAL_DIODE 0 -#define FAN_INPUT_TEMP0 1 -#define FAN_INPUT_TEMP1 2 -#define FAN_INPUT_TEMP2 3 -#define FAN_INPUT_TEMP3 4 -#define FAN_INPUT_TEMP0_FILTER 5 -#define FAN_INPUT_ZERO 6 -#define FAN_INPUT_DISABLED 7 - -#define FAN_AUTOMODE (1 << 0) -#define FAN_LINEARMODE (1 << 1) -#define FAN_STEPMODE ~(1 << 1) -#define FAN_POLARITY_HIGH (1 << 2) -#define FAN_POLARITY_LOW ~(1 << 2) - -/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */ -#define FREQ_28KHZ 0x0 -#define FREQ_25KHZ 0x1 -#define FREQ_23KHZ 0x2 -#define FREQ_21KHZ 0x3 -#define FREQ_29KHZ 0x4 -#define FREQ_18KHZ 0x5 -#define FREQ_100HZ 0xF7 -#define FREQ_87HZ 0xF8 -#define FREQ_58HZ 0xF9 -#define FREQ_44HZ 0xFA -#define FREQ_35HZ 0xFB -#define FREQ_29HZ 0xFC -#define FREQ_22HZ 0xFD -#define FREQ_14HZ 0xFE -#define FREQ_11HZ 0xFF - -/* imb_a180 Hardware Monitor Fan Control - * Hardware limitation: - * HWM failed to read the input temperture vi I2C, - * if other software switch the I2C switch by mistake or intention. - * We recommend to using IMC to control Fans, instead of HWM. - */ -#if 0 -static void oem_fan_control(FCH_DATA_BLOCK *FchParams) -{ - FCH_HWM_FAN_CTR oem_factl[5] = { - /*temperatuer input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */ - /* imb_a180 FanOUT0 Fan header J32 */ - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - /* imb_a180 FanOUT1 Fan header J31*/ - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - }; - LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader); - - /* Enable IMC fan control. the recommand way */ -#if defined CONFIG_HUDSON_IMC_FWM && (CONFIG_HUDSON_IMC_FWM == 1) - /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */ - FchParams->Hwm.HwMonitorEnable = TRUE; - FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */ - - FchParams->Imc.ImcEnable = TRUE; - FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */ - FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */ - - LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader); - - /* Thermal Zone Parameter */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; //BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00;//6 | BIT3; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0; - - /* IMC Fan Policy temperature thresholds */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0;///80; /*AC0 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0; /*AC1 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0; /*AC2 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00; - - /* IMC Fan Policy PWM Settings */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0; /* AL0 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0; /* AL1 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0; /* AL2 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00; /* AL3 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00; /* AL4 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00; /* AL5 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00; /* AL6 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00; /* AL7 percentage */ - - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55;//BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0; - - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00; - - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */ - - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0; - - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0; - - /* IMC Function */ - FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;//BIT0 | BIT4 |BIT8; - - /* NOTE: - * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege, - * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it. - * so we remove it from AGESA code. Please Seee FchInitLateHwm. - */ - -#else /* HWM fan control, the way not recommand */ - FchParams->Imc.ImcEnable = FALSE; - FchParams->Hwm.HwMonitorEnable = TRUE; - FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */ - -#endif /* CONFIG_HUDSON_IMC_FWM */ -} -#endif - -/** * Fch Oem setting callback * * Configure platform specific Hudson device, @@ -314,15 +66,12 @@ AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr) FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData; printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
- /* Azalia Controller OEM Codec Table Pointer */ - FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST*)CodecTableList; /* Azalia Controller Front Panel OEM Table Pointer */
/* Fan Control */ - //oem_fan_control(FchParams_env);
/* XHCI configuration */ -#if CONFIG_HUDSON_XHCI_ENABLE +#if IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE) FchParams_env->Usb.Xhci0Enable = TRUE; #else FchParams_env->Usb.Xhci0Enable = FALSE; diff --git a/src/mainboard/hp/abm/BiosCallOuts.h b/src/mainboard/hp/abm/BiosCallOuts.h index 2b8aae2..fb893df 100644 --- a/src/mainboard/hp/abm/BiosCallOuts.h +++ b/src/mainboard/hp/abm/BiosCallOuts.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/src/mainboard/hp/abm/Kconfig b/src/mainboard/hp/abm/Kconfig index aa075c8..505beae 100644 --- a/src/mainboard/hp/abm/Kconfig +++ b/src/mainboard/hp/abm/Kconfig @@ -1,7 +1,8 @@ # # This file is part of the coreboot project. # -# Copyright (C) 2012 Advanced Micro Devices, Inc. +# Copyright (C) 2012-2014 Advanced Micro Devices, Inc. +# Copyright (C) 2014 Sage Electronic Engineering, LLC # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -14,32 +15,30 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA #
-if BOARD_ASROCK_IMB_A180 +if BOARD_HP_ABM
config BOARD_SPECIFIC_OPTIONS # dummy def_bool y select CPU_AMD_AGESA_FAMILY16_KB select NORTHBRIDGE_AMD_AGESA_FAMILY16_KB select SOUTHBRIDGE_AMD_AGESA_YANGTZE - select SUPERIO_WINBOND_W83627UHG + select SUPERIO_NUVOTON_NCT5104D select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE select HAVE_MP_TABLE - select HAVE_ACPI_RESUME select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_4096 - select GFXUMA + select BOARD_ROMSIZE_KB_8192
config MAINBOARD_DIR string - default asrock/imb-a180 + default hp/abm
config MAINBOARD_PART_NUMBER string - default "IMB-A180" + default "ABM"
config HW_MEM_HOLE_SIZEK hex @@ -73,20 +72,8 @@ config RAMBASE hex default 0x200000
-config ONBOARD_VGA_IS_PRIMARY - bool - default y - config HUDSON_LEGACY_FREE bool - default y - -# bit 1,0 - pin 0 -# bit 3,2 - pin 1 -# bit 5,4 - pin 2 -# bit 7,6 - pin 3 -config AZ_PIN - hex - default 0x2 + default n
-endif # BOARD_ASROCK_IMB_A180 +endif # BOARD_HP_ABM diff --git a/src/mainboard/hp/abm/Makefile.inc b/src/mainboard/hp/abm/Makefile.inc index a83297a..bd2717f 100644 --- a/src/mainboard/hp/abm/Makefile.inc +++ b/src/mainboard/hp/abm/Makefile.inc @@ -2,6 +2,7 @@ # This file is part of the coreboot project. # # Copyright (C) 2012 Advanced Micro Devices, Inc. +# Copyright (C) 2014 Sage Electronic Engineering, LLC # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by diff --git a/src/mainboard/hp/abm/OptionsIds.h b/src/mainboard/hp/abm/OptionsIds.h index 0a1d328..5880030 100644 --- a/src/mainboard/hp/abm/OptionsIds.h +++ b/src/mainboard/hp/abm/OptionsIds.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
/** @@ -64,4 +65,4 @@ //#define IDSOPT_HOST_HDT FALSE //#define IDS_DEBUG_PORT 0x80
-#endif +#endif /* _OPTION_IDS_H_ */ diff --git a/src/mainboard/hp/abm/PlatformGnbPcie.c b/src/mainboard/hp/abm/PlatformGnbPcie.c index 24d8381..f2dc287 100644 --- a/src/mainboard/hp/abm/PlatformGnbPcie.c +++ b/src/mainboard/hp/abm/PlatformGnbPcie.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -87,16 +88,10 @@ static const PCIe_DDI_DESCRIPTOR DdiList [] = { }, /* DP1 to FCH */ { - 0, + DESCRIPTOR_TERMINATE_LIST, PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux2, Hdp2) }, - /* DP2 to HDMI1/DP */ - { - DESCRIPTOR_TERMINATE_LIST, - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 16, 19), - PCIE_DDI_DATA_INITIALIZER (ConnectorTypeCrt, Aux3, Hdp3) - }, };
static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { diff --git a/src/mainboard/hp/abm/PlatformGnbPcieComplex.h b/src/mainboard/hp/abm/PlatformGnbPcieComplex.h index 1db8b2d..f875e1b 100644 --- a/src/mainboard/hp/abm/PlatformGnbPcieComplex.h +++ b/src/mainboard/hp/abm/PlatformGnbPcieComplex.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/src/mainboard/hp/abm/acpi/AmdImc.asl b/src/mainboard/hp/abm/acpi/AmdImc.asl index 074dd7c..f664dc1 100644 --- a/src/mainboard/hp/abm/acpi/AmdImc.asl +++ b/src/mainboard/hp/abm/acpi/AmdImc.asl @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/src/mainboard/hp/abm/acpi/gpe.asl b/src/mainboard/hp/abm/acpi/gpe.asl index 8d4f8a2..338d942 100644 --- a/src/mainboard/hp/abm/acpi/gpe.asl +++ b/src/mainboard/hp/abm/acpi/gpe.asl @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2013 Sage Electronic Engineering, LLC + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/src/mainboard/hp/abm/acpi/mainboard.asl b/src/mainboard/hp/abm/acpi/mainboard.asl index 05523fb..ca3fd6e 100644 --- a/src/mainboard/hp/abm/acpi/mainboard.asl +++ b/src/mainboard/hp/abm/acpi/mainboard.asl @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2013 Sage Electronic Engineering, LLC + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -35,7 +35,4 @@ Name(PMOD, One) /* Assume APIC */
/* AcpiGpe0Blk */ OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04) - Field(GP0B, ByteAcc, NoLock, Preserve) { - , 11, - USBS, 1, -} + Field(GP0B, ByteAcc, NoLock, Preserve) { , 11, USBS, 1, } diff --git a/src/mainboard/hp/abm/acpi/routing.asl b/src/mainboard/hp/abm/acpi/routing.asl index 0b924a3..f8b7f96 100644 --- a/src/mainboard/hp/abm/acpi/routing.asl +++ b/src/mainboard/hp/abm/acpi/routing.asl @@ -2,7 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2013 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/src/mainboard/hp/abm/acpi/sata.asl b/src/mainboard/hp/abm/acpi/sata.asl index 3d19222..db349e1 100644 --- a/src/mainboard/hp/abm/acpi/sata.asl +++ b/src/mainboard/hp/abm/acpi/sata.asl @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012-2013 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/src/mainboard/hp/abm/acpi/si.asl b/src/mainboard/hp/abm/acpi/si.asl index 3cc2170..ea6e3b1 100644 --- a/src/mainboard/hp/abm/acpi/si.asl +++ b/src/mainboard/hp/abm/acpi/si.asl @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2013 Sage Electronic Engineering, LLC + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/src/mainboard/hp/abm/acpi/sleep.asl b/src/mainboard/hp/abm/acpi/sleep.asl index 2fc2efe..e257537 100644 --- a/src/mainboard/hp/abm/acpi/sleep.asl +++ b/src/mainboard/hp/abm/acpi/sleep.asl @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2013 Sage Electronic Engineering, LLC + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/src/mainboard/hp/abm/acpi/superio.asl b/src/mainboard/hp/abm/acpi/superio.asl old mode 100644 new mode 100755 index ec72e36..60443e2 --- a/src/mainboard/hp/abm/acpi/superio.asl +++ b/src/mainboard/hp/abm/acpi/superio.asl @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2013 Sage Electronic Engineering, LLC + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/src/mainboard/hp/abm/acpi/thermal.asl b/src/mainboard/hp/abm/acpi/thermal.asl old mode 100644 new mode 100755 index 0466a1b..13d6ed1 --- a/src/mainboard/hp/abm/acpi/thermal.asl +++ b/src/mainboard/hp/abm/acpi/thermal.asl @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2013 Sage Electronic Engineering, LLC + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/src/mainboard/hp/abm/acpi/usb_oc.asl b/src/mainboard/hp/abm/acpi/usb_oc.asl index 7b5b1c6..c7b770d 100644 --- a/src/mainboard/hp/abm/acpi/usb_oc.asl +++ b/src/mainboard/hp/abm/acpi/usb_oc.asl @@ -2,7 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -41,7 +41,7 @@ Name(UOM9, 6)
/* USB Overcurrent GPEs */
-#if 0 /* TODO: Update for imba180 */ +#if 0 /* TODO: Update */ Method(UCOC, 0) { Sleep(20) Store(0x13,CMTI) diff --git a/src/mainboard/hp/abm/acpi_tables.c b/src/mainboard/hp/abm/acpi_tables.c index 1175792..ea3ed5a 100644 --- a/src/mainboard/hp/abm/acpi_tables.c +++ b/src/mainboard/hp/abm/acpi_tables.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -59,7 +60,7 @@ unsigned long acpi_fill_madt(unsigned long current) /* 0: mean bus 0--->ISA */ /* 0: PIC 0 */ /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ + /* 5 mean: 0101 --> Edige-triggered, Active high */
/* create all subtables for processors */ current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); diff --git a/src/mainboard/hp/abm/agesawrapper.c b/src/mainboard/hp/abm/agesawrapper.c index 4e9e77b..ec6ce7c 100644 --- a/src/mainboard/hp/abm/agesawrapper.c +++ b/src/mainboard/hp/abm/agesawrapper.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,12 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/*---------------------------------------------------------------------------------------- - * M O D U L E S U S E D - *---------------------------------------------------------------------------------------- + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
#include <stdint.h> @@ -43,18 +39,13 @@ #include <cpu/amd/agesa/s3_resume.h> #include <arch/io.h> #include <device/device.h> -#include "hudson.h" +#include <southbridge/amd/agesa/hudson/hudson.h>
VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr); VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr);
#define FILECODE UNASSIGNED_FILE_FILECODE
-/*---------------------------------------------------------------------------------------- - * D E F I N I T I O N S A N D M A C R O S - *---------------------------------------------------------------------------------------- - */ - /* ACPI table pointers returned by AmdInitLate */ VOID *DmiTable = NULL; VOID *AcpiPstate = NULL; @@ -66,25 +57,6 @@ VOID *AcpiWheaCmc = NULL; VOID *AcpiAlib = NULL; VOID *AcpiIvrs = NULL;
-/*---------------------------------------------------------------------------------------- - * T Y P E D E F S A N D S T R U C T U R E S - *---------------------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------------------- - * P R O T O T Y P E S O F L O C A L F U N C T I O N S - *---------------------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------------------- - * E X P O R T E D F U N C T I O N S - *---------------------------------------------------------------------------------------- - */ - -/*--------------------------------------------------------------------------------------- - * L O C A L F U N C T I O N S - *--------------------------------------------------------------------------------------- - */ UINT32 agesawrapper_amdinitcpuio ( VOID @@ -159,6 +131,12 @@ agesawrapper_amdinitmmio ( MsrReg = MsrReg | 0x0000400000000000; LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader);
+ /* The early console init code needs access to LPC SIO at 4E/4F */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x48); + LibAmdPciRead(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciData |= 0x00000003; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + /* For serial port */ PciData = 0xFF03FFD5; PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44); diff --git a/src/mainboard/hp/abm/agesawrapper.h b/src/mainboard/hp/abm/agesawrapper.h index 8589db5..bc91b37 100644 --- a/src/mainboard/hp/abm/agesawrapper.h +++ b/src/mainboard/hp/abm/agesawrapper.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,12 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/*---------------------------------------------------------------------------------------- - * M O D U L E S U S E D - *---------------------------------------------------------------------------------------- + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
#ifndef _AGESAWRAPPER_H_ @@ -29,10 +25,6 @@ #include "Porting.h" #include "AGESA.h"
-/*---------------------------------------------------------------------------------------- - * D E F I N I T I O N S A N D M A C R O S - *---------------------------------------------------------------------------------------- - */ /* Define AMD Ontario APPU SSID/SVID */ #define AMD_APU_SVID 0x1022 #define AMD_APU_SSID 0x1234 @@ -49,26 +41,6 @@ enum { PICK_IVRS, /* IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table */ };
-/*---------------------------------------------------------------------------------------- - * T Y P E D E F S A N D S T R U C T U R E S - *---------------------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------------------- - * P R O T O T Y P E S O F L O C A L F U N C T I O N S - *---------------------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------------------- - * E X P O R T E D F U N C T I O N S - *---------------------------------------------------------------------------------------- - */ - -/*--------------------------------------------------------------------------------------- - * L O C A L F U N C T I O N S - *--------------------------------------------------------------------------------------- - */ - UINT32 agesawrapper_amdinitreset (void); UINT32 agesawrapper_amdinitearly (void); UINT32 agesawrapper_amdinitenv (void); @@ -87,4 +59,4 @@ UINT32 agesawrapper_amds3laterestore (VOID); UINT32 agesawrapper_fchs3earlyrestore (VOID); UINT32 agesawrapper_fchs3laterestore (VOID);
-#endif +#endif /* _AGESAWRAPPER_H_ */ diff --git a/src/mainboard/hp/abm/buildOpts.c b/src/mainboard/hp/abm/buildOpts.c index 7c57183..1b875e0 100644 --- a/src/mainboard/hp/abm/buildOpts.c +++ b/src/mainboard/hp/abm/buildOpts.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -76,7 +77,7 @@ #define BLDOPT_REMOVE_SRAT FALSE //TRUE #define BLDOPT_REMOVE_SLIT FALSE //TRUE #define BLDOPT_REMOVE_WHEA FALSE //TRUE -#define BLDOPT_REMOVE_CRAT TRUE +#define BLDOPT_REMOVE_CRAT TRUE #define BLDOPT_REMOVE_CDIT TRUE #define BLDOPT_REMOVE_DMI TRUE //#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE @@ -153,7 +154,7 @@ #define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000ul #define BLDCFG_1GB_ALIGN FALSE #define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED -#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO +#define BLDCFG_UMA_ALLOCATION_MODE UMA_NONE #define BLDCFG_PLATFORM_CSTATE_MODE CStateModeDisabled #define BLDCFG_IOMMU_SUPPORT FALSE #define OPTION_GFX_INIT_SVIEW FALSE @@ -345,11 +346,20 @@ CONST AP_MTRR_SETTINGS ROMDATA KabiniApMtrrSettingsList[] = #define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE //#define BLDCFG_IR_PIN_CONTROL 0x33
-GPIO_CONTROL imba180_gpio[] = { - {183, Function1, GpioIn | GpioOutEnB | PullUpB}, +GPIO_CONTROL hp_abm_gpio[] = { + { 45, Function2, GpioOutEnB | Sticky }, // Signal input APU_SD_LED + { 49, Function2, PullUpB | PullDown | Sticky }, // Signal output APU_ABM_LED_UID + { 50, Function2, PullUpB | PullDown | Sticky }, // Signal output APU_ABM_LED_HEALTH + { 51, Function2, GpioOut | PullUpB | PullDown | Sticky }, // Signal output APU_ABM_LED_FAULT + { 57, Function2, GpioOutEnB | Sticky }, // Signal input SATA_PRSNT_L + { 58, Function2, GpioOutEnB | Sticky }, // Signal i/o APU_HDMI_CEC + { 64, Function2, GpioOutEnB | Sticky }, // Signal input SWC_APU_INT_L + { 68, Function0, GpioOutEnB | Sticky }, // Signal input CNTRL1_PRSNT + { 69, Function0, GpioOutEnB | Sticky }, // Signal input CNTRL2_PRSNT + { 71, Function0, GpioOut | PullUpB | PullDown | Sticky }, // Signal output APU_PROCHOT_L_R {-1} }; -//#define BLDCFG_FCH_GPIO_CONTROL_LIST (&imba180_gpio[0]) +#define BLDCFG_FCH_GPIO_CONTROL_LIST (&hp_abm_gpio[0])
// The following definitions specify the default values for various parameters in which there are // no clearly defined defaults to be used in the common file. The values below are based on product @@ -442,11 +452,11 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A),
- NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - MOTHER_BOARD_LAYERS (LAYERS_4), + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, ONE_DIMM), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, ONE_DIMM), + MOTHER_BOARD_LAYERS (LAYERS_6),
- MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), diff --git a/src/mainboard/hp/abm/cmos.layout b/src/mainboard/hp/abm/cmos.layout index f6b5806..fa3438b 100644 --- a/src/mainboard/hp/abm/cmos.layout +++ b/src/mainboard/hp/abm/cmos.layout @@ -3,6 +3,7 @@ # This file is part of the coreboot project. # # Copyright (C) 2012 Advanced Micro Devices, Inc. +# Copyright (C) 2014 Sage Electronic Engineering, LLC # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -15,7 +16,7 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA #*****************************************************************************
entries diff --git a/src/mainboard/hp/abm/devicetree.cb b/src/mainboard/hp/abm/devicetree.cb index 6d6875d..eb18a05 100644 --- a/src/mainboard/hp/abm/devicetree.cb +++ b/src/mainboard/hp/abm/devicetree.cb @@ -2,6 +2,7 @@ # This file is part of the coreboot project. # # Copyright (C) 2013 Advanced Micro Devices, Inc. +# Copyright (C) 2014 Sage Electronic Engineering, LLC # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -28,76 +29,55 @@ chip northbridge/amd/agesa/family16kb/root_complex chip northbridge/amd/agesa/family16kb # CPU side of HT root complex
chip northbridge/amd/agesa/family16kb # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # x4 PCIe slot - device pci 2.2 on end # mPCIe slot - device pci 2.3 on end # Realtek NIC - device pci 2.4 on end # Edge Connector - device pci 2.5 on end # Edge Connector + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 off end # unused + device pci 2.2 on end # GPP0: NIC + device pci 2.3 on end # GPP1: NIC + device pci 2.4 off end # GPP2: unused + device pci 2.5 off end # GPP3: unused end #chip northbridge/amd/agesa/family16kb
chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 device pci 11.0 on end # SATA device pci 12.0 on end # USB device pci 12.2 on end # USB device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 + chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on - chip superio/winbond/w83627uhg - device pnp 2e.0 off end # FDC - device pnp 2e.1 off end # LPT1 - device pnp 2e.2 on # COM1 + device pci 14.2 off end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/nuvoton/nct5104d + device pnp 4e.0 off end # FDC + device pnp 4e.2 on # COM1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.3 on # COM2 + device pnp 4e.3 on # COM2 io 0x60 = 0x2f8 irq 0x70 = 3 end - device pnp 2e.5 on # KEYBRD - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 on # COM3 - io 0x60 = 0x3e8 - irq 0x70 = 4 - end - device pnp 2e.7 off end # GPIO - device pnp 2e.8 off end # WDT - device pnp 2e.9 off end # GPIO - device pnp 2e.a off end # ACPI - device pnp 2e.b off end # HWMON - device pnp 2e.c off end # PECI - device pnp 2e.d on # COM4 + device pnp 4e.7 off end # GPIO + device pnp 4e.8 off end # GPIO/WDT + device pnp 4e.f off end # GPIO + device pnp 4e.10 off end # COM3 used by port 80 + device pnp 4e.11 on # COM4 io 0x60 = 0x2e8 irq 0x70 = 3 end - device pnp 2e.e on # COM5 - io 0x60 = 0x3e0 - irq 0x70 = 4 - end - device pnp 2e.f on # COM6 - io 0x60 = 0x2e0 - irq 0x70 = 3 - end - end # w83627uhg - end # LPC 0x439d - device pci 14.7 on end # SD + device pnp 4e.14 off end # PORT80 + register "irq_trigger_type" = "0" # 0 edge, 1 level + end # nct5104d + end #LPC + device pci 14.7 off end # SD + device pci 16.0 on end # USB + device pci 16.2 on end # USB end #chip southbridge/amd/hudson
device pci 18.0 on end @@ -108,10 +88,8 @@ chip northbridge/amd/agesa/family16kb/root_complex device pci 18.5 on end register "spdAddrLookup" = " { - { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses - { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses + { {0xA0, 0x00}, {0x00, 0x00}, }, // socket 0 - Channel 0 - 8-bit SPD addresses }" - end #chip northbridge/amd/agesa/family16kb # CPU side of HT root complex end #domain end #northbridge/amd/agesa/family16kb/root_complex diff --git a/src/mainboard/hp/abm/dsdt.asl b/src/mainboard/hp/abm/dsdt.asl index cecaa59..cdfc78f 100644 --- a/src/mainboard/hp/abm/dsdt.asl +++ b/src/mainboard/hp/abm/dsdt.asl @@ -2,7 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2013 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC + * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
/* DefinitionBlock Statement */ diff --git a/src/mainboard/hp/abm/get_bus_conf.c b/src/mainboard/hp/abm/get_bus_conf.c index a380872..dbd8ef8 100644 --- a/src/mainboard/hp/abm/get_bus_conf.c +++ b/src/mainboard/hp/abm/get_bus_conf.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
#include <console/console.h> @@ -26,6 +27,9 @@ #include <cpu/amd/amdfam14.h> #include "agesawrapper.h"
+#define KABINI_INTERNAL_MULTIMEDIA_CONTROL_AND_STATUS 0x60 +#define NO_SNOOP_ENABLE 11 + /* Global variables for MB layouts and these will be shared by irqtable mptable * and acpi_tables busnum is default. */ @@ -94,16 +98,17 @@ void get_bus_conf(void) status = agesawrapper_amdinitlate(); if (status) printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status); -#endif +#endif /* CONFIG_HAVE_ACPI_RESUME */ + dev = dev_find_slot(0, PCI_DEVFN(0, 0)); /* clear IoapicSbFeatureEn */ pci_write_config32(dev, 0xF8, 0); pci_write_config32(dev, 0xFC, 5); /* TODO: move it to dsdt.asl */
/* disable No Snoop */ dev = dev_find_slot(0, PCI_DEVFN(1, 1)); - value = pci_read_config32(dev, 0x60); - value &= ~(1 << 11); - pci_write_config32(dev, 0x60, value); + value = pci_read_config32(dev, KABINI_INTERNAL_MULTIMEDIA_CONTROL_AND_STATUS); + value &= ~(1 << NO_SNOOP_ENABLE); + pci_write_config32(dev, KABINI_INTERNAL_MULTIMEDIA_CONTROL_AND_STATUS, value);
sbdn_yangtze = 0;
diff --git a/src/mainboard/hp/abm/irq_tables.c b/src/mainboard/hp/abm/irq_tables.c index 8454007..998f00b 100644 --- a/src/mainboard/hp/abm/irq_tables.c +++ b/src/mainboard/hp/abm/irq_tables.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
#include <console/console.h> @@ -63,7 +64,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr += 15; addr &= ~15;
- /* This table must be between 0xf0000 & 0x100000 */ + /* This table must be betweeen 0xf0000 & 0x100000 */ printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
pirq = (void *)(addr); diff --git a/src/mainboard/hp/abm/mainboard.c b/src/mainboard/hp/abm/mainboard.c index 3913898..9f4bbf5 100644 --- a/src/mainboard/hp/abm/mainboard.c +++ b/src/mainboard/hp/abm/mainboard.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,16 +22,97 @@ #include <device/device.h> #include <device/pci.h> #include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> #include <arch/acpi.h> #include "BiosCallOuts.h" #include <cpu/amd/agesa/s3_resume.h> +#include <southbridge/amd/amd_pci_util.h> +#include <southbridge/amd/agesa/hudson/pci_devs.h> +#include <northbridge/amd/agesa/family16kb/pci_devs.h> #include "agesawrapper.h"
+void set_pcie_reset(void); +void set_pcie_dereset(void); + +/*********************************************************** + * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01. + * This table is responsible for physically routing the PIC and + * IOAPIC IRQs to the different PCI devices on the system. It + * is read and written via registers 0xC00/0xC01 as an + * Index/Data pair. These values are chipset and mainboard + * dependent and should be updated accordingly. + * + * These values are used by the PCI configuration space, + * MP Tables. TODO: Make ACPI use these values too. + */ +static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = { + [0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B, /* INTA# - INTH# */ + [0x08] = 0x00,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ + [0x10] = 0x1F,0x1F,0x1F,0x0A,0x1F,0x1F,0x1F,0x0A, /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerfMon, SD */ + [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, /* IMC INT0 - 5 */ + [0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A, /* USB Devs 18/19/20/22 INTA-C */ + [0x40] = 0x0B,0x0B, /* IDE, SATA */ +}; + +static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = { + [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ + [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ + [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x10, /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon, SD */ + [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, /* IMC INT0 - 5 */ + [0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12, /* USB Devs 18/19/22/20 INTA-C */ + [0x40] = 0x11,0x13, /* IDE, SATA */ +}; + +/* + * This table defines the index into the picr/intr_data + * tables for each device. Any enabled device and slot + * that uses hardware interrupts should have an entry + * in this table to define its index into the FCH + * PCI_INTR register 0xC00/0xC01. This index will define + * the interrupt that it should use. Putting PIRQ_A into + * the PIN A index for a device will tell that device to + * use PIC IRQ 10 if it uses PIN A for its hardware INT. + */ +static const struct pirq_struct mainboard_pirq_data[] = { + /* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */ + {GFX_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */ + {NB_PCIE_PORT2_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 02.2 */ + {NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 02.3 */ + {NB_PCIE_PORT4_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 02.4 */ + {NB_PCIE_PORT5_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 02.5 */ + {SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */ + {OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 12.0 */ + {EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 12.2 */ + {OHCI2_DEVFN, {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2: 13.0 */ + {EHCI2_DEVFN, {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2: 13.2 */ + {SMBUS_DEVFN, {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS: 14.0 */ + {HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 14.2 */ + {SB_PCI_PORT_DEVFN, {PIRQ_H, PIRQ_E, PIRQ_F, PIRQ_G}}, /* PCIB: 14.4 */ + {SD_DEVFN, {PIRQ_SD, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SD: 14.7 */ + {OHCI3_DEVFN, {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3: 16.0 */ + {EHCI3_DEVFN, {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3: 16.2 */ +}; + +/* PIRQ Setup */ +static void pirq_setup(void) +{ + pirq_data_ptr = mainboard_pirq_data; + pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct); + intr_data_ptr = mainboard_intr_data; + picr_data_ptr = mainboard_picr_data; +} + +/* TODO: mainboard specific SB AGESA callback */ +void set_pcie_reset(void) +{ +} + +/* TODO: mainboard specific SB AGESA callback */ +void set_pcie_dereset(void) +{ +} + /********************************************** - * enable the dedicated function in mainboard. + * Enable the dedicated functions of the board. **********************************************/ static void mainboard_enable(device_t dev) { @@ -44,6 +126,9 @@ static void mainboard_enable(device_t dev) if (acpi_slp_type == 3) agesawrapper_fchs3earlyrestore(); #endif + + /* Initialize the PIRQ data structures for consumption */ + pirq_setup(); }
struct chip_operations mainboard_ops = { diff --git a/src/mainboard/hp/abm/mptable.c b/src/mainboard/hp/abm/mptable.c index 3e2b076..5c1a1ff 100644 --- a/src/mainboard/hp/abm/mptable.c +++ b/src/mainboard/hp/abm/mptable.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
#include <console/console.h> diff --git a/src/mainboard/hp/abm/romstage.c b/src/mainboard/hp/abm/romstage.c index 382ad5b..470dd5d 100644 --- a/src/mainboard/hp/abm/romstage.c +++ b/src/mainboard/hp/abm/romstage.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,14 +15,13 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
#include <stdint.h> #include <string.h> #include <device/pci_def.h> #include <device/pci_ids.h> -#include <arch/acpi.h> #include <arch/io.h> #include <arch/stages.h> #include <device/pnp_def.h> @@ -29,18 +29,18 @@ #include <cpu/x86/lapic.h> #include <console/console.h> #include <console/loglevel.h> -#include "cpu/amd/car.h" +#include <cpu/amd/car.h> #include "agesawrapper.h" -#include "cpu/x86/bist.h" -#include "cpu/x86/lapic.h" -#include "southbridge/amd/agesa/hudson/hudson.h" -#include "cpu/amd/agesa/s3_resume.h" -#include "cbmem.h" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627uhg/w83627uhg.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627UHG_SP1) +#include <cpu/x86/bist.h> +#include <cpu/x86/lapic.h> +#include <southbridge/amd/agesa/hudson/hudson.h> +#include <cpu/amd/agesa/s3_resume.h> +#include <cbmem.h> +#include <superio/nuvoton/common/nuvoton.h> +#include <superio/nuvoton/nct5104d/nct5104d.h>
+#define SIO_PORT 0x4E +#define SERIAL_DEV PNP_DEV(SIO_PORT, NCT5104D_SP4)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { @@ -50,13 +50,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) void *resume_backup_memory; #endif
- /* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for - * LpcClk[1:0]". To be consistent with Parmer, setting to 4mA - * even though the register is not documented in the Kabini BKDG. - * Otherwise the serial output is bad code. - */ - //outb(0xD2, 0xcd6); - //outb(0x00, 0xcd7);
val = agesawrapper_amdinitmmio();
@@ -64,27 +57,28 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Enable the AcpiMmio space */ outb(0x24, 0xcd6); - outb(0x1, 0xcd7); + outb(0x01, 0xcd7);
- /* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */ + /* Set auxiliary output clock frequency on OSCOUT1 pin to be 25MHz */ + /* Set auxiliary output clock frequency on OSCOUT2 pin to be 48MHz */ addr32 = (u32 *)0xfed80e28; t32 = *addr32; - t32 &= 0xfff8ffff; + t32 &= 0xffc0ffff; // Clr bits [21:19] & [18:16] + t32 |= 0x00010000; // Set bit 16 for 25MHz *addr32 = t32;
- /* Enable Auxiliary Clock1, disable FCH 14 MHz OscClk */ + /* Enable Auxiliary OSCOUT1/OSCOUT2 */ addr32 = (u32 *)0xfed80e40; t32 = *addr32; - t32 &= 0xffffbffb; + t32 &= 0xffffff7b; // clear 2, 7 *addr32 = t32;
if (!cpu_init_detectedx && boot_cpu()) { post_code(0x30); post_code(0x31);
- /* w83627uhg has a default clk of 48MHz, p.9 of data-sheet */ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - + nct5104d_enable_uartd(SERIAL_DEV); + nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); console_init(); }
@@ -97,11 +91,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val); printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
- /* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */ - int i; - for(i = 0; i < 200000; i++) - val = inb(0xcd6); - post_code(0x37); val = agesawrapper_amdinitreset(); if(val) {