Furquan Shaikh (furquan@google.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/17681
-gerrit
commit 7469da23edcf9aa8feac4bacf16e83c881698621 Author: Furquan Shaikh furquan@chromium.org Date: Tue Nov 29 22:07:42 2016 -0800
spi: Get rid of SPI_ATOMIC_SEQUENCING
SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with the ability to perform tx and rx of flash command and response at the same time. Instead of introducing this notion at SPI flash driver layer, clean up the interface to SPI used by flash.
Flash uses a command-response kind of communication. Thus, even though SPI is duplex, flash command needs to be sent out on SPI bus and then flash response should be received on the bus. Some specialized x86 flash controllers are capable of handling command and response in a single transaction.
In order to support all the varied cases: 1. Add spi_xfer_vector that takes as input a vector of SPI operations and calls back into SPI controller driver to process these operations. 2. In order to accomodate flash command-response model, use two vectors while calling into spi_xfer_vector -- one with dout set to non-NULL(command) and other with din set to non-NULL(response). 3. For specialized SPI flash controllers combine two successive vectors if the transactions look like a command-response pair. 4. Provide helper functions for common cases like supporting only 2 vectors at a time, supporting n vectors at a time, default vector operation to cycle through all SPI op vectors one by one.
BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully
Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236 Signed-off-by: Furquan Shaikh furquan@chromium.org --- src/drivers/spi/Kconfig | 10 -- src/drivers/spi/spi-generic.c | 167 +++++++++++++++++++++++++++++++ src/drivers/spi/spi_flash.c | 47 +++------ src/include/spi-generic.h | 71 ++++++++++++- src/mainboard/google/purin/Kconfig | 1 - src/soc/broadcom/cygnus/spi.c | 1 + src/soc/imgtec/pistachio/Kconfig | 1 - src/soc/imgtec/pistachio/spi.c | 7 +- src/soc/intel/baytrail/spi.c | 1 + src/soc/intel/braswell/spi.c | 1 + src/soc/intel/broadwell/spi.c | 1 + src/soc/intel/fsp_baytrail/spi.c | 1 + src/soc/intel/fsp_broadwell_de/spi.c | 1 + src/soc/marvell/armada38x/spi.c | 35 ++++--- src/soc/mediatek/mt8173/Kconfig | 1 - src/soc/mediatek/mt8173/spi.c | 1 + src/soc/nvidia/tegra124/spi.c | 1 + src/soc/nvidia/tegra210/spi.c | 1 + src/soc/qualcomm/ipq40xx/Kconfig | 1 - src/soc/qualcomm/ipq40xx/spi.c | 1 + src/soc/qualcomm/ipq806x/Kconfig | 1 - src/soc/qualcomm/ipq806x/spi.c | 1 + src/soc/rockchip/common/spi.c | 1 + src/soc/samsung/exynos5420/spi.c | 1 + src/southbridge/amd/agesa/hudson/spi.c | 1 + src/southbridge/amd/cimx/sb800/spi.c | 1 + src/southbridge/amd/sb700/spi.c | 2 + src/southbridge/intel/common/spi.c | 1 + src/southbridge/intel/fsp_rangeley/spi.c | 1 + 29 files changed, 293 insertions(+), 68 deletions(-)
diff --git a/src/drivers/spi/Kconfig b/src/drivers/spi/Kconfig index b55de58..c8d86ff 100644 --- a/src/drivers/spi/Kconfig +++ b/src/drivers/spi/Kconfig @@ -61,16 +61,6 @@ config SPI_FLASH_INCLUDE_ALL_DRIVERS default n if COMMON_CBFS_SPI_WRAPPER default y
-config SPI_ATOMIC_SEQUENCING - bool - default y if ARCH_X86 - default n if !ARCH_X86 - help - Select this option if the SPI controller uses "atomic sequencing." - Atomic sequencing is when the sequence of commands is pre-programmed - in the SPI controller. Hardware manages the transaction instead of - software. This is common on x86 platforms. - config SPI_FLASH_SMM bool "SPI flash driver support in SMM" default n diff --git a/src/drivers/spi/spi-generic.c b/src/drivers/spi/spi-generic.c index 4fcd04c..2cf3364 100644 --- a/src/drivers/spi/spi-generic.c +++ b/src/drivers/spi/spi-generic.c @@ -14,6 +14,7 @@ * GNU General Public License for more details. */
+#include <assert.h> #include <spi-generic.h> #include <string.h>
@@ -32,10 +33,61 @@ void spi_release_bus(const struct spi_slave *slave) ctrlr->release_bus(slave); }
+static int spi_xfer_single_op(const struct spi_slave *slave, + struct spi_op *op) +{ + const struct spi_ctrlr *ctrlr = slave->ctrlr; + int ret; + + if (!ctrlr || !ctrlr->xfer) + return -1; + + ret = ctrlr->xfer(slave, op->dout, op->bytesout, op->din, op->bytesin); + if (ret) + op->status = SPI_OP_FAILURE; + else + op->status = SPI_OP_SUCCESS; + + return ret; +} + +/* + * Helper function that operates on all the SPI operation vectors one by + * one. If any of the the operations fail, then it returns back to caller. + * + * Returns 0 on success and -1 on error. + */ +int spi_xfer_vector_default(const struct spi_slave *slave, + struct spi_op vectors[], size_t count) +{ + size_t i; + int ret; + + for (i = 0; i < count; i++) { + ret = spi_xfer_single_op(slave, &vectors[i]); + if (ret) + return ret; + } + + return 0; +} + +int spi_xfer_vector(const struct spi_slave *slave, + struct spi_op vectors[], size_t count) +{ + const struct spi_ctrlr *ctrlr = slave->ctrlr; + + if (ctrlr && ctrlr->xfer_vector) + return ctrlr->xfer_vector(slave, vectors, count); + + return spi_xfer_vector_default(slave, vectors, count); +} + int spi_xfer(const struct spi_slave *slave, const void *dout, size_t bytesout, void *din, size_t bytesin) { const struct spi_ctrlr *ctrlr = slave->ctrlr; + if (ctrlr && ctrlr->xfer) return ctrlr->xfer(slave, dout, bytesout, din, bytesin);
@@ -76,3 +128,118 @@ int __attribute__((weak)) spi_setup_slave(unsigned int bus, unsigned int cs,
return 0; } + +static int spi_xfer_comb_two_vectors(const struct spi_slave *slave, + struct spi_op *v1, struct spi_op *v2) +{ + struct spi_op op; + int ret; + + /* + * If either of the vectors is not single directional, then return + * error. + */ + if ((v1->dout && v1->din) || (v2->dout && v2->din)) + return -1; + + /* + * If the vectors are not opposite in direction(read vs write), then + * return error. + */ + if (v1->dout && v2->dout) + return -1; + + if (v1->dout) { + op.dout = v1->dout; + op.bytesout = v1->bytesout; + } else { + op.dout = v2->dout; + op.bytesout = v2->bytesout; + } + + if (v1->din) { + op.din = v1->din; + op.bytesin = v1->bytesin; + } else { + op.din = v2->din; + op.bytesin = v2->bytesin; + } + + ret = spi_xfer_single_op(slave, &op); + v1->status = v2->status = op.status; + + return ret; +} + +/* + * Helper function to allow chipsets to combine two vectors. If the two vectors + * are single and opposite direction operations, then they are combined, else + * each vector is operation upon one at a time. + * + * Returns 0 on success and non-zero on failure. + */ +int spi_xfer_two_vectors(const struct spi_slave *slave, + struct spi_op vectors[], size_t count) +{ + int ret; + + assert (count <= 2); + + if (count == 2) { + ret = spi_xfer_comb_two_vectors(slave, &vectors[0], + &vectors[1]); + + if (!ret || (vectors[0].status != SPI_OP_NOT_EXECUTED)) + return ret; + } + + return spi_xfer_vector_default(slave, vectors, count); +} + +/* + * Helper function to allow chipsets to combine vectors for full duplex whenever + * possible. This function tries to combine two adjacent vectors if both are + * single and opposite direction operations. If not, then each vector is + * operated upon one at a time. + * + * Returns 0 on success and non-zero on failure. + */ +int spi_xfer_multi_vectors(const struct spi_slave *slave, + struct spi_op vectors[], size_t count) +{ + size_t i = 0; + int ret; + + while (i < count) { + /* + * Check if there is more than one vector present and if they + * can be combined. + */ + if ((i + 1) < count) { + ret = spi_xfer_comb_two_vectors(slave, &vectors[i], + &vectors[i+1]); + /* + * If combined SPI operation was successful, increment i + * by 2 and continue loop. + */ + if (!ret) { + i += 2; + continue; + } + /* + * If combined SPI operation was executed and failed, + * then return error back to caller. + */ + if (vectors[i].status != SPI_OP_NOT_EXECUTED) + return ret; + } + + /* Try out single SPI op at a time. */ + ret = spi_xfer_single_op(slave, &vectors[i]); + if (ret) + return ret; + i++; + } + + return 0; +} diff --git a/src/drivers/spi/spi_flash.c b/src/drivers/spi/spi_flash.c index 3b4272b..a0e3105 100644 --- a/src/drivers/spi/spi_flash.c +++ b/src/drivers/spi/spi_flash.c @@ -32,47 +32,30 @@ static void spi_flash_addr(u32 addr, u8 *cmd) cmd[3] = addr >> 0; }
-/* - * If atomic sequencing is used, the cycle type is known to the SPI - * controller so that it can perform consecutive transfers and arbitrate - * automatically. Otherwise the SPI controller transfers whatever the - * user requests immediately, without regard to sequence. Atomic - * sequencing is commonly used on x86 platforms. - * - * SPI flash commands are simple two-step sequences. The command byte is - * always written first and may be followed by an address. Then data is - * either read or written. For atomic sequencing we'll pass everything into - * spi_xfer() at once and let the controller handle the details. Otherwise - * we will write all output bytes first and then read if necessary. - * - * FIXME: This really should be abstracted better, but that will - * require overhauling the entire SPI infrastructure. - */ static int do_spi_flash_cmd(const struct spi_slave *spi, const void *dout, size_t bytes_out, void *din, size_t bytes_in) { int ret = 1; + /* + * SPI flash requires command-response kind of behavior. Thus, two + * separate SPI vectors are required -- first to transmit dout and other + * to receive in din. If some specialized SPI flash controllers + * (e.g. x86) can perform both command and response together, it should + * be handled at SPI flash controller driver level. + */ + struct spi_op vectors[] = { + [0] = { .dout = dout, .bytesout = bytes_out, + .din = NULL, .bytesin = 0, }, + [1] = { .dout = NULL, .bytesout = 0, + .din = din, .bytesin = bytes_in }, + };
if (spi_claim_bus(spi)) return ret;
-#if CONFIG_SPI_ATOMIC_SEQUENCING == 1 - if (spi_xfer(spi, dout, bytes_out, din, bytes_in) < 0) - goto done; -#else - if (dout && bytes_out) { - if (spi_xfer(spi, dout, bytes_out, NULL, 0) < 0) - goto done; - } - - if (din && bytes_in) { - if (spi_xfer(spi, NULL, 0, din, bytes_in) < 0) - goto done; - } -#endif + if (spi_xfer_vector(spi, vectors, ARRAY_SIZE(vectors)) == 0) + ret = 0;
- ret = 0; -done: spi_release_bus(spi); return ret; } diff --git a/src/include/spi-generic.h b/src/include/spi-generic.h index d28fefd..15d2a19 100644 --- a/src/include/spi-generic.h +++ b/src/include/spi-generic.h @@ -36,20 +36,46 @@ struct spi_slave { const struct spi_ctrlr *ctrlr; };
+/* Representation of SPI operation status. */ +enum spi_op_status { + SPI_OP_NOT_EXECUTED = 0, + SPI_OP_SUCCESS = 1, + SPI_OP_FAILURE = 2, +}; + +/* + * Representation of a SPI operation. + * + * dout: Pointer to data to send. + * bytesout: Count of data in bytes to send. + * din: Pointer to store received data. + * bytesin: Count of data in bytes to receive. + */ +struct spi_op { + const void *dout; + size_t bytesout; + void *din; + size_t bytesin; + enum spi_op_status status; +}; + /*----------------------------------------------------------------------- * Representation of a SPI contoller. * * claim_bus: Claim SPI bus and prepare for communication. * release_bus: Release SPI bus. - * xfer: SPI transfer * setup: Setup given SPI device bus. + * xfer: Perform one SPI transfer operation. + * xfer_vector: Vector of SPI transfer operations. */ struct spi_ctrlr { int (*claim_bus)(const struct spi_slave *slave); void (*release_bus)(const struct spi_slave *slave); + int (*setup)(const struct spi_slave *slave); int (*xfer)(const struct spi_slave *slave, const void *dout, size_t bytesout, void *din, size_t bytesin); - int (*setup)(const struct spi_slave *slave); + int (*xfer_vector)(const struct spi_slave *slave, + struct spi_op vectors[], size_t count); };
/*----------------------------------------------------------------------- @@ -134,6 +160,19 @@ void spi_release_bus(const struct spi_slave *slave); int spi_xfer(const struct spi_slave *slave, const void *dout, size_t bytesout, void *din, size_t bytesin);
+/*----------------------------------------------------------------------- + * Vector of SPI transfer operations + * + * spi_xfer_vector() interface: + * slave: The SPI slave which will be sending/receiving the data. + * vectors: Array of SPI op structures. + * count: Number of SPI op vectors. + * + * Returns: 0 on success, not 0 on failure + */ +int spi_xfer_vector(const struct spi_slave *slave, + struct spi_op vectors[], size_t count); + unsigned int spi_crop_chunk(unsigned int cmd_len, unsigned int buf_len);
/*----------------------------------------------------------------------- @@ -158,4 +197,32 @@ static inline int spi_w8r8(const struct spi_slave *slave, unsigned char byte) return ret < 0 ? ret : din[1]; }
+/* + * Helper function to allow chipsets to combine two vectors. If the two vectors + * are single and opposite direction operations, then they are combined, else + * each vector is operation upon one at a time. + * + * Returns 0 on success and non-zero on failure. + */ +int spi_xfer_two_vectors(const struct spi_slave *slave, + struct spi_op vectors[], size_t count); +/* + * Helper function to allow chipsets to combine vectors for full duplex whenever + * possible. This function tries to combine two adjacent vectors if both are + * single and opposite direction operations. If not, then each vector is + * operated upon one at a time. + * + * Returns 0 on success and non-zero on failure. + */ +int spi_xfer_multi_vectors(const struct spi_slave *slave, + struct spi_op vectors[], size_t count); +/* + * Helper function that operates on all the SPI operation vectors one by + * one. If any of the the operations fail, then it returns back to caller. + * + * Returns 0 on success and -1 on error. + */ +int spi_xfer_vector_default(const struct spi_slave *slave, + struct spi_op vectors[], size_t count); + #endif /* _SPI_GENERIC_H_ */ diff --git a/src/mainboard/google/purin/Kconfig b/src/mainboard/google/purin/Kconfig index eabab2b..ca0909b 100644 --- a/src/mainboard/google/purin/Kconfig +++ b/src/mainboard/google/purin/Kconfig @@ -26,7 +26,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select SPI_FLASH select SPI_FLASH_SPANSION select SPI_FLASH_STMICRO # required for the reference board BCM958305K - select SPI_ATOMIC_SEQUENCING
config CHROMEOS select VBOOT_VBNV_FLASH diff --git a/src/soc/broadcom/cygnus/spi.c b/src/soc/broadcom/cygnus/spi.c index e597efc..f03d453 100644 --- a/src/soc/broadcom/cygnus/spi.c +++ b/src/soc/broadcom/cygnus/spi.c @@ -279,6 +279,7 @@ static const struct spi_ctrlr spi_ctrlr = { .claim_bus = spi_ctrlr_claim_bus, .release_bus = spi_ctrlr_release_bus, .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_two_vectors, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/soc/imgtec/pistachio/Kconfig b/src/soc/imgtec/pistachio/Kconfig index da33cc5..1ce488c 100644 --- a/src/soc/imgtec/pistachio/Kconfig +++ b/src/soc/imgtec/pistachio/Kconfig @@ -22,7 +22,6 @@ config CPU_IMGTEC_PISTACHIO select GENERIC_UDELAY select HAVE_MONOTONIC_TIMER select HAVE_UART_SPECIAL - select SPI_ATOMIC_SEQUENCING select GENERIC_GPIO_LIB select HAVE_HARD_RESET select UART_OVERRIDE_REFCLK diff --git a/src/soc/imgtec/pistachio/spi.c b/src/soc/imgtec/pistachio/spi.c index e956e46..2b706f0 100644 --- a/src/soc/imgtec/pistachio/spi.c +++ b/src/soc/imgtec/pistachio/spi.c @@ -22,10 +22,6 @@ #include <string.h> #include <timer.h>
-#if !CONFIG_SPI_ATOMIC_SEQUENCING -#error "Unsupported SPI driver API" -#endif - /* Imgtec controller uses 16 bit packet length. */ #define IMGTEC_SPI_MAX_TRANSFER_SIZE ((1 << 16) - 1)
@@ -496,7 +492,7 @@ static int do_spi_xfer(const struct spi_slave *slave, const void *dout, }
static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout, - size_t bytesout, void *din, size_t bytesin) + size_t bytesout, void *din, size_t bytesin) { unsigned int in_sz, out_sz; int ret; @@ -541,6 +537,7 @@ static const struct spi_ctrlr spi_ctrlr = { .claim_bus = spi_ctrlr_claim_bus, .release_bus = spi_ctrlr_release_bus, .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_two_vectors, };
/* Set up communications parameters for a SPI slave. */ diff --git a/src/soc/intel/baytrail/spi.c b/src/soc/intel/baytrail/spi.c index 0f7b0c6..13e3170 100644 --- a/src/soc/intel/baytrail/spi.c +++ b/src/soc/intel/baytrail/spi.c @@ -612,6 +612,7 @@ static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout,
static const struct spi_ctrlr spi_ctrlr = { .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_multi_vectors, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/soc/intel/braswell/spi.c b/src/soc/intel/braswell/spi.c index 2a0ddf8..5d5e1c6 100644 --- a/src/soc/intel/braswell/spi.c +++ b/src/soc/intel/braswell/spi.c @@ -596,6 +596,7 @@ static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout,
static const struct spi_ctrlr spi_ctrlr = { .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_multi_vectors, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/soc/intel/broadwell/spi.c b/src/soc/intel/broadwell/spi.c index d2ae943..4fd784b 100644 --- a/src/soc/intel/broadwell/spi.c +++ b/src/soc/intel/broadwell/spi.c @@ -646,6 +646,7 @@ int spi_flash_protect(u32 start, u32 size)
static const struct spi_ctrlr spi_ctrlr = { .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_multi_vectors, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/soc/intel/fsp_baytrail/spi.c b/src/soc/intel/fsp_baytrail/spi.c index 997bd13..b340043 100644 --- a/src/soc/intel/fsp_baytrail/spi.c +++ b/src/soc/intel/fsp_baytrail/spi.c @@ -592,6 +592,7 @@ spi_xfer_exit:
static const struct spi_ctrlr spi_ctrlr = { .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_multi_vectors, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/soc/intel/fsp_broadwell_de/spi.c b/src/soc/intel/fsp_broadwell_de/spi.c index 5848966..44e771b 100644 --- a/src/soc/intel/fsp_broadwell_de/spi.c +++ b/src/soc/intel/fsp_broadwell_de/spi.c @@ -609,6 +609,7 @@ spi_xfer_exit:
static const struct spi_ctrlr spi_ctrlr = { .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_multi_vectors, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/soc/marvell/armada38x/spi.c b/src/soc/marvell/armada38x/spi.c index 25480e4..dbe8af6 100644 --- a/src/soc/marvell/armada38x/spi.c +++ b/src/soc/marvell/armada38x/spi.c @@ -459,27 +459,34 @@ unsigned int spi_crop_chunk(unsigned int cmd_len, unsigned int buf_len) return buf_len; }
-static int spi_ctrlr_xfer(const struct spi_slave *slave, - const void *dout, - size_t out_bytes, - void *din, - size_t in_bytes) +static int spi_ctrlr_xfer(const struct spi_slave *slave, struct spi_op *op) { - int ret = -1; - - if (out_bytes) - ret = mrvl_spi_xfer(slave, out_bytes * 8, dout, din); - else if (in_bytes) - ret = mrvl_spi_xfer(slave, in_bytes * 8, dout, din); - else - die("Unexpected condition in spi_xfer\n"); - return ret; + const void *dout = op->dout; + void *din = op->din; + size_t out_bytes = op->bytesout; + size_t in_bytes = op->bytesin; + size_t bytes; + + if (dout && din) { + assert(out_bytes == in_bytes); + bytes = out_bytes; + } else if (dout) + bytes = out_bytes; + else if (din) + bytes = in_bytes; + else { + printk(BIOS_ERR, "Both din and dout are NULL!!\n"); + return -1; + } + + return mrvl_spi_xfer(slave, bytes * 8, dout, din); }
static const spi_ctrlr spi_ctrlr = { .claim_bus = spi_ctrlr_claim_bus, .release_bus = spi_ctrlr_release_bus, .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_vector_default, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/soc/mediatek/mt8173/Kconfig b/src/soc/mediatek/mt8173/Kconfig index ec3481e..7a6ad87 100644 --- a/src/soc/mediatek/mt8173/Kconfig +++ b/src/soc/mediatek/mt8173/Kconfig @@ -9,7 +9,6 @@ config SOC_MEDIATEK_MT8173 select ARM64_USE_ARM_TRUSTED_FIRMWARE select BOOTBLOCK_CONSOLE select HAVE_UART_SPECIAL - select SPI_ATOMIC_SEQUENCING if SPI_FLASH select HAVE_MONOTONIC_TIMER select GENERIC_UDELAY select GENERIC_GPIO_LIB diff --git a/src/soc/mediatek/mt8173/spi.c b/src/soc/mediatek/mt8173/spi.c index 53d5b8c..415764a 100644 --- a/src/soc/mediatek/mt8173/spi.c +++ b/src/soc/mediatek/mt8173/spi.c @@ -293,6 +293,7 @@ static const struct spi_ctrlr spi_ctrlr = { .claim_bus = spi_ctrlr_claim_bus, .release_bus = spi_ctrlr_release_bus, .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_two_vectors, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/soc/nvidia/tegra124/spi.c b/src/soc/nvidia/tegra124/spi.c index 5d8084f..15a901b 100644 --- a/src/soc/nvidia/tegra124/spi.c +++ b/src/soc/nvidia/tegra124/spi.c @@ -802,6 +802,7 @@ static const struct spi_ctrlr spi_ctrlr = { .claim_bus = spi_ctrlr_claim_bus, .release_bus = spi_ctrlr_release_bus, .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_vector_default, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/soc/nvidia/tegra210/spi.c b/src/soc/nvidia/tegra210/spi.c index 2921355..71166a3 100644 --- a/src/soc/nvidia/tegra210/spi.c +++ b/src/soc/nvidia/tegra210/spi.c @@ -838,6 +838,7 @@ static const struct spi_ctrlr spi_ctrlr = { .claim_bus = spi_ctrlr_claim_bus, .release_bus = spi_ctrlr_release_bus, .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_vector_default, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/soc/qualcomm/ipq40xx/Kconfig b/src/soc/qualcomm/ipq40xx/Kconfig index f738622..05f29e4 100644 --- a/src/soc/qualcomm/ipq40xx/Kconfig +++ b/src/soc/qualcomm/ipq40xx/Kconfig @@ -7,7 +7,6 @@ config SOC_QC_IPQ40XX select ARCH_RAMSTAGE_ARMV7 select BOOTBLOCK_CONSOLE select HAVE_UART_SPECIAL - select SPI_ATOMIC_SEQUENCING select GENERIC_GPIO_LIB select HAVE_MONOTONIC_TIMER
diff --git a/src/soc/qualcomm/ipq40xx/spi.c b/src/soc/qualcomm/ipq40xx/spi.c index 6d044b3..a9342d0 100644 --- a/src/soc/qualcomm/ipq40xx/spi.c +++ b/src/soc/qualcomm/ipq40xx/spi.c @@ -656,6 +656,7 @@ static const struct spi_ctrlr spi_ctrlr = { .claim_bus = spi_ctrlr_claim_bus, .release_bus = spi_ctrlr_release_bus, .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_vector_default, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/soc/qualcomm/ipq806x/Kconfig b/src/soc/qualcomm/ipq806x/Kconfig index 7ba5df5..32b61bc 100644 --- a/src/soc/qualcomm/ipq806x/Kconfig +++ b/src/soc/qualcomm/ipq806x/Kconfig @@ -7,7 +7,6 @@ config SOC_QC_IPQ806X select ARCH_RAMSTAGE_ARMV7 select BOOTBLOCK_CONSOLE select HAVE_UART_SPECIAL - select SPI_ATOMIC_SEQUENCING select GENERIC_GPIO_LIB
if SOC_QC_IPQ806X diff --git a/src/soc/qualcomm/ipq806x/spi.c b/src/soc/qualcomm/ipq806x/spi.c index e907729..5ebaac6 100644 --- a/src/soc/qualcomm/ipq806x/spi.c +++ b/src/soc/qualcomm/ipq806x/spi.c @@ -761,6 +761,7 @@ static const struct spi_ctrlr spi_ctrlr = { .claim_bus = spi_ctrlr_claim_bus, .release_bus = spi_ctrlr_release_bus, .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_vector_default, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/soc/rockchip/common/spi.c b/src/soc/rockchip/common/spi.c index 16143b5..a8a5abb 100644 --- a/src/soc/rockchip/common/spi.c +++ b/src/soc/rockchip/common/spi.c @@ -332,6 +332,7 @@ static const struct spi_ctrlr spi_ctrlr = { .claim_bus = spi_ctrlr_claim_bus, .release_bus = spi_ctrlr_release_bus, .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_vector_default, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/soc/samsung/exynos5420/spi.c b/src/soc/samsung/exynos5420/spi.c index f17566e..f8e3af6 100644 --- a/src/soc/samsung/exynos5420/spi.c +++ b/src/soc/samsung/exynos5420/spi.c @@ -212,6 +212,7 @@ static const struct spi_ctrlr spi_ctrlr = { .claim_bus = spi_ctrlr_claim_bus, .release_bus = spi_ctrlr_release_bus, .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_vector_default, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/southbridge/amd/agesa/hudson/spi.c b/src/southbridge/amd/agesa/hudson/spi.c index 8a4adfb..99c6122 100644 --- a/src/southbridge/amd/agesa/hudson/spi.c +++ b/src/southbridge/amd/agesa/hudson/spi.c @@ -167,6 +167,7 @@ int chipset_volatile_group_end(const struct spi_flash *flash)
static const struct spi_ctrlr spi_ctrlr = { .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_multi_vectors, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/southbridge/amd/cimx/sb800/spi.c b/src/southbridge/amd/cimx/sb800/spi.c index edf192a..6163702 100644 --- a/src/southbridge/amd/cimx/sb800/spi.c +++ b/src/southbridge/amd/cimx/sb800/spi.c @@ -158,6 +158,7 @@ int chipset_volatile_group_end(const struct spi_flash *flash)
static const struct spi_ctrlr spi_ctrlr = { .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_multi_vectors, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/southbridge/amd/sb700/spi.c b/src/southbridge/amd/sb700/spi.c index 2e16ca8..e4f544a 100644 --- a/src/southbridge/amd/sb700/spi.c +++ b/src/southbridge/amd/sb700/spi.c @@ -118,8 +118,10 @@ static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout, return 0; }
+ static const struct spi_ctrlr spi_ctrlr = { .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_multi_vectors, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/southbridge/intel/common/spi.c b/src/southbridge/intel/common/spi.c index 093017e..e9e83a8 100644 --- a/src/southbridge/intel/common/spi.c +++ b/src/southbridge/intel/common/spi.c @@ -659,6 +659,7 @@ static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout,
static const struct spi_ctrlr spi_ctrlr = { .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_multi_vectors, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) diff --git a/src/southbridge/intel/fsp_rangeley/spi.c b/src/southbridge/intel/fsp_rangeley/spi.c index 8026698..b380971 100644 --- a/src/southbridge/intel/fsp_rangeley/spi.c +++ b/src/southbridge/intel/fsp_rangeley/spi.c @@ -724,6 +724,7 @@ spi_xfer_exit:
static const struct spi_ctrlr spi_ctrlr = { .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_multi_vectors, };
int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave)