[coreboot-gerrit] Change in coreboot[master]: drivers/i2c: sx9310: Replace register map with descriptive names

[Patrick Georgi (Code Review)]

Attention is currently required from: Paul Menzel, Tim Wawrzynczak, Nick Vaccaro, Julius Werner, Gwendal Grignou.
Patrick Georgi has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/50210 )

Change subject: drivers/i2c: sx9310: Replace register map with descriptive names
......................................................................

Patch Set 6:

(4 comments)

Commit Message:

https://review.coreboot.org/c/coreboot/+/50210/comment/41306c88_d2c20e40 
PS3, Line 7: drivers/i2c: sx9310: Use open source variables
> yes, the original driver in the kernel was using chip registers map to configure the SAR sensor, whi […]

Done

Patchset:

PS6: 
Gwendal, you're not dealing with coreboot all that often: our Gerrit instance is configured so that comments need to be marked "Resolved" before a change can go in.

File src/drivers/i2c/sx9310/sx9310.c:

https://review.coreboot.org/c/coreboot/+/50210/comment/7c438c81_58d2885d 
PS3, Line 70: 	 *                      proximity/semtech,sx9310.yaml
> Yes: https://www.kernel.org/doc/Documentation/devicetree/bindings/iio/proximity/s.... […]

Done

File src/drivers/i2c/sx9310/sx9310.c:

https://review.coreboot.org/c/coreboot/+/50210/comment/203deec0_52fcd7c2 
PS6, Line 69:    * Format describe in linux kernel documentation. See
the formatting seems off here