Attention is currently required from: Subrata Banik, Nick Vaccaro, Hima B Chilmakuru. Hello Subrata Banik, Nick Vaccaro, Hima B Chilmakuru,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/61722
to look at the new patch set (#2).
Change subject: mb/google/brya: Enable GPIO PM dynamically based on cr50 FW version ......................................................................
mb/google/brya: Enable GPIO PM dynamically based on cr50 FW version
cr50 firmware revisions starting at 0.5.5 and later are able to extend their IRQ pulses to be a minimum of 100us long. This change will enable cr50 long interrupt pulses when it detects the feature is supported by the detected firmware version. If the capability was detected, then GPIO PM will be enabled for the device, otherwise it will be disabled.
BUG=b:202246591 TEST=boot brya0, check console logs for the correct message, and verify the GPIO PM registers.
Signed-off-by: Tim Wawrzynczak twawrzynczak@chromium.org Change-Id: Iaf333dc0f177e17cd03b36ec7e487fc33bde2b93 --- M src/mainboard/google/brya/Kconfig M src/mainboard/google/brya/mainboard.c M src/mainboard/google/brya/variants/baseboard/brask/devicetree.cb M src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb 4 files changed, 28 insertions(+), 20 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/22/61722/2