September 2022 - flashrom-gerrit

Change in flashrom[master]: flashchips: Add ISSI IS25LQ016
by Angel Pons (Code Review) 15 Aug '23

15 Aug '23

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/40431 ) Change subject: flashchips: Add ISSI IS25LQ016 ...................................................................... flashchips: Add ISSI IS25LQ016 Datasheet: http://www.issi.com/WW/pdf/25LQ016.pdf Tested all four PREW functions with a FT2232H. Change-Id: I02f19767b8a60fb2d37adab34894b6edb6ac4494 Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M flashchips.c M flashchips.h 2 files changed, 39 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/31/40431/1 diff --git a/flashchips.c b/flashchips.c index b4006df..a25f915 100644 --- a/flashchips.c +++ b/flashchips.c @@ -7049,6 +7049,44 @@ { .vendor = "ISSI", + .name = "IS25LQ016", + .bustype = BUS_SPI, + .manufacture_id = ISSI_ID_SPI, + .model_id = ISSI_IS25LQ016, + .total_size = 2048, + .page_size = 256, + /* OTP: 1024B total; read 0x4b; write 0xb1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2300, 3600}, + }, + + { + .vendor = "ISSI", .name = "IS25WP032", .bustype = BUS_SPI, .manufacture_id = ISSI_ID_SPI, diff --git a/flashchips.h b/flashchips.h index e5ef390..b5c0aeb 100644 --- a/flashchips.h +++ b/flashchips.h @@ -459,6 +459,7 @@ #define ISSI_IS25LP064 0x6017 #define ISSI_IS25LP128 0x6018 #define ISSI_IS25LP256 0x6019 +#define ISSI_IS25LQ016 0x1445 #define ISSI_IS25WP032 0x7016 #define ISSI_IS25WP064 0x7017 #define ISSI_IS25WP128 0x7018 -- To view, visit https://review.coreboot.org/c/flashrom/+/40431 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I02f19767b8a60fb2d37adab34894b6edb6ac4494 Gerrit-Change-Number: 40431 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

6 8

Change in flashrom[master]: flashchips: Added missing voltages
by Name of user not set (Code Review) 02 Jun '23

02 Jun '23

roman.stingler(a)gmail.com has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/40432 ) Change subject: flashchips: Added missing voltages ...................................................................... flashchips: Added missing voltages Signed-off-by: Roman Stingler <roman.stingler(a)gmail.com> Change-Id: I0825ab11e53c0b018b49173907e2b274a4cf1fab --- M flashchips.c 1 file changed, 9 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/32/40432/1 diff --git a/flashchips.c b/flashchips.c index b4006df..f2d9fc1 100644 --- a/flashchips.c +++ b/flashchips.c @@ -7650,6 +7650,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -7677,6 +7678,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -7704,6 +7706,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -7727,6 +7730,7 @@ .unlock = unlock_28f004s5, .write = write_82802ab, .read = read_memmapped, + .voltage = {2700, 3600}, }, { @@ -7755,6 +7759,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -7783,6 +7788,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -9972,6 +9978,7 @@ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, + .voltage = {2700, 3600}, }, { @@ -17550,6 +17557,7 @@ }, .write = write_jedec, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -17573,6 +17581,7 @@ }, .write = write_jedec, .read = read_memmapped, + .voltage = {4500, 5500}, }, { -- To view, visit https://review.coreboot.org/c/flashrom/+/40432 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I0825ab11e53c0b018b49173907e2b274a4cf1fab Gerrit-Change-Number: 40432 Gerrit-PatchSet: 1 Gerrit-Owner: roman.stingler(a)gmail.com Gerrit-MessageType: newchange

4 6

Change in flashrom[master]: flaschips.c: Fix building with CONFIG_DUMMY=no
by Arthur Heymans (Code Review) 21 Apr '23

21 Apr '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/47166 ) Change subject: flaschips.c: Fix building with CONFIG_DUMMY=no ...................................................................... flaschips.c: Fix building with CONFIG_DUMMY=no With CONFIG_DUMMY=yes dummuflasher.c is not linked in so there is definition of probe_variable_size. Change-Id: Ib9bae93fadc55cf133e837e63419da104a6298be Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M flashchips.c 1 file changed, 4 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/66/47166/1 diff --git a/flashchips.c b/flashchips.c index 48efb85..1681f42 100644 --- a/flashchips.c +++ b/flashchips.c @@ -19081,3 +19081,7 @@ }; const unsigned int flashchips_size = ARRAY_SIZE(flashchips); + +#if !CONFIG_DUMMY +int probe_variable_size(struct flashctx *flash) { return 0; }; +#endif -- To view, visit https://review.coreboot.org/c/flashrom/+/47166 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ib9bae93fadc55cf133e837e63419da104a6298be Gerrit-Change-Number: 47166 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

5 12

Change in flashrom[master]: buspirate: Add option for setting the aux pin
by Sean Anderson (Code Review) 13 Apr '23

13 Apr '23

Sean Anderson has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/43608 ) Change subject: buspirate: Add option for setting the aux pin ...................................................................... buspirate: Add option for setting the aux pin This adds a parameter to drive the aux pin low (or high if you explicitly want the previous behavior). Some boards need to have a reset pin driven low before the firmware can be safely flashed. With the Bus Pirate, this is most easily done with the auxiliary pin. Change-Id: Ieeecfdf1afc06dadda9b8f99547cd74854ca6775 Signed-off-by: Sean Anderson <seanga2(a)gmail.com> --- M buspirate_spi.c M flashrom.8.tmpl 2 files changed, 33 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/08/43608/1 diff --git a/buspirate_spi.c b/buspirate_spi.c index fdfc0e4..1ccb107 100644 --- a/buspirate_spi.c +++ b/buspirate_spi.c @@ -228,6 +228,7 @@ int serialspeed_index = -1; int ret = 0; int pullup = 0; + int aux = 1; dev = extract_programmer_param("dev"); if (dev && !strlen(dev)) { @@ -277,6 +278,17 @@ } free(tmp); + tmp = extract_programmer_param("aux"); + if (tmp) { + if (strcasecmp("high", tmp) == 0) + ; /* Default */ + else if (strcasecmp("low", tmp) == 0) + aux = 0; + else + msg_perr("Invalid AUX state, driving high by default.\n"); + } + free(tmp); + /* Default buffer size is 19: 16 bytes data, 3 bytes control. */ #define DEFAULT_BUFSIZE (16 + 3) bp_commbuf = malloc(DEFAULT_BUFSIZE); @@ -520,11 +532,18 @@ } /* Initial setup (SPI peripherals config): Enable power, CS high, AUX */ - bp_commbuf[0] = 0x40 | 0x0b; + bp_commbuf[0] = 0x40 | 0x09; if (pullup == 1) { bp_commbuf[0] |= (1 << 2); msg_pdbg("Enabling pull-up resistors.\n"); } + if (aux) { + bp_commbuf[0] |= (1 << 1); + msg_pdbg("Driving AUX high.\n"); + } else { + msg_pdbg("Driving AUX low.\n"); + } + ret = buspirate_sendrecv(bp_commbuf, 1, 1); if (ret) return 1; diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index db50d59..caf860c 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -902,6 +902,19 @@ .URLB "http://dangerousprototypes.com/docs/Practical_guide_to_Bus_Pirate_pull-up_r…" \ "in a guide by dangerousprototypes" . Only the external supply voltage (Vpu) is supported as of this writing. +.sp +An optional aux parameter specifies the state of the Bus Pirate auxiliary pin. +This may be used to drive the auxiliary pin high or low before a transfer. +Syntax is +.sp +.B " flashrom -p buspirate_spi:aux=state" +.sp +where +.B state +can be +.BR high " or " low . +The default +.BR state " is " high . .SS .BR "pickit2_spi " programmer .IP -- To view, visit https://review.coreboot.org/c/flashrom/+/43608 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ieeecfdf1afc06dadda9b8f99547cd74854ca6775 Gerrit-Change-Number: 43608 Gerrit-PatchSet: 1 Gerrit-Owner: Sean Anderson <seanga2(a)gmail.com> Gerrit-MessageType: newchange

6 14

Change in ...flashrom[master]: cli_classic: Report the gathered layout entries at level dbg
by Nico Huber (Code Review) 04 Nov '22

04 Nov '22

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/31012 Change subject: cli_classic: Report the gathered layout entries at level dbg ...................................................................... cli_classic: Report the gathered layout entries at level dbg Change-Id: I7678ba5138f0d722ee44747fe123f192abdd0ffd Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M cli_classic.c M layout.c M layout.h 3 files changed, 18 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/12/31012/1 diff --git a/cli_classic.c b/cli_classic.c index ced08c6..536ef24 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -645,6 +645,8 @@ goto out_shutdown; } + report_layout(layout); + flashrom_layout_set(fill_flash, layout); flashrom_flag_set(fill_flash, FLASHROM_FLAG_FORCE, !!force); #if CONFIG_INTERNAL == 1 diff --git a/layout.c b/layout.c index fa66238..c589d17 100644 --- a/layout.c +++ b/layout.c @@ -229,3 +229,17 @@ return ret; } + +void report_layout(const struct flashrom_layout *const l) +{ + unsigned int i; + + if (!l) + return; + + msg_gdbg("Gathered %zu layout entries:\n", l->num_entries); + for (i = 0; i < l->num_entries; ++i) { + msg_gdbg("%08"PRIx32":%08"PRIx32" %s\n", + l->entries[i].start, l->entries[i].end, l->entries[i].name); + } +} diff --git a/layout.h b/layout.h index eb54a4f..61311bc 100644 --- a/layout.h +++ b/layout.h @@ -59,4 +59,6 @@ int process_include_args(struct flashrom_layout *); +void report_layout(const struct flashrom_layout *); + #endif /* !__LAYOUT_H__ */ -- To view, visit https://review.coreboot.org/c/flashrom/+/31012 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I7678ba5138f0d722ee44747fe123f192abdd0ffd Gerrit-Change-Number: 31012 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

5 19

[L] Change in flashrom[master]: dirtyjtag: Add DirtyJTAG programmer
by Jean THOMAS (Code Review) 01 Oct '22

01 Oct '22

Attention is currently required from: Felix Singer, Nico Huber, Thomas Heijligen, Alexander Goncharov. Hello Felix Singer, build bot (Jenkins), Nico Huber, Thomas Heijligen, Angel Pons, I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/flashrom/+/67878 to look at the new patch set (#9). Change subject: dirtyjtag: Add DirtyJTAG programmer ...................................................................... dirtyjtag: Add DirtyJTAG programmer Add a new programmer driver for the DirtyJTAG project (a USB-JTAG firmware for STM32 MCUs). Successfully tested with DirtyJTAG 1.4 running on an Olimex STM32-H103 development board and a SST25VF020B SPI flash chip. Change-Id: Ic43e9a014ed7d04e429e73b30c9dcfdde1a78913 Signed-off-by: Jean THOMAS <virgule(a)jeanthomas.me> --- M Makefile A dirtyjtag_spi.c M flashrom.8.tmpl M include/programmer.h M meson.build M meson_options.txt M programmer_table.c M test_build.sh 8 files changed, 381 insertions(+), 5 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/78/67878/9 -- To view, visit https://review.coreboot.org/c/flashrom/+/67878 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ic43e9a014ed7d04e429e73b30c9dcfdde1a78913 Gerrit-Change-Number: 67878 Gerrit-PatchSet: 9 Gerrit-Owner: Jean THOMAS <virgule(a)jeanthomas.me> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Felix Singer <felixsinger(a)posteo.net> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Thomas Heijligen <src(a)posteo.de> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Alexander Goncharov <chat(a)joursoir.net> Gerrit-Attention: Felix Singer <felixsinger(a)posteo.net> Gerrit-Attention: Nico Huber <nico.h(a)gmx.de> Gerrit-Attention: Thomas Heijligen <src(a)posteo.de> Gerrit-Attention: Alexander Goncharov <chat(a)joursoir.net> Gerrit-MessageType: newpatchset

1 0

[L] Change in flashrom[master]: dirtyjtag: Add DirtyJTAG programmer
by Jean THOMAS (Code Review) 01 Oct '22

01 Oct '22

Attention is currently required from: Felix Singer, Nico Huber, Thomas Heijligen, Alexander Goncharov. Jean THOMAS has posted comments on this change. ( https://review.coreboot.org/c/flashrom/+/67878 ) Change subject: dirtyjtag: Add DirtyJTAG programmer ...................................................................... Patch Set 7: (5 comments) Patchset: PS7: > Thanks for your update. Alas, I missed to check the resource usage/cleanup in […] Done PS7: Hi Nico, don't worry and thanks again for your careful review. I tried addressing the cleanup issues and did a little bit of code styling to better match the requirements of the linux kernel coding style. We're close to the end! ;-) File dirtyjtag_spi.c: https://review.coreboot.org/c/flashrom/+/67878/comment/cb86c88a_3f69e8d5 PS7, Line 154: 32 > Just curious, is there anything in the last two bytes? Nope! But the xfer reply is fixed 32 bytes, no matter how much data is written. https://github.com/jeanthom/DirtyJTAG/blob/master/src/cmd.c#L179 https://review.coreboot.org/c/flashrom/+/67878/comment/cafac22d_a05dd3cd PS7, Line 212: NULL > Should use the `djtag_data->libusb_ctx`. Many more below, too. Done https://review.coreboot.org/c/flashrom/+/67878/comment/b1eafeb2_9ffcea8e PS7, Line 297: return -1; > Sorry, I always forget to check such cleanup paths ._. […] Don't worry, I should've been more careful on this one. I've created 2 additionals labels for the cleanup path: * cleanup_djtag_struct: Freeing the djtag_data structure * cleanup_libusb_ctx: Cleaning the libusb context * cleanup_libusb_handle: Cleaning the libusb handle/attaching back the kernel driver -- To view, visit https://review.coreboot.org/c/flashrom/+/67878 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ic43e9a014ed7d04e429e73b30c9dcfdde1a78913 Gerrit-Change-Number: 67878 Gerrit-PatchSet: 7 Gerrit-Owner: Jean THOMAS <virgule(a)jeanthomas.me> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Felix Singer <felixsinger(a)posteo.net> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Thomas Heijligen <src(a)posteo.de> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Alexander Goncharov <chat(a)joursoir.net> Gerrit-Attention: Felix Singer <felixsinger(a)posteo.net> Gerrit-Attention: Nico Huber <nico.h(a)gmx.de> Gerrit-Attention: Thomas Heijligen <src(a)posteo.de> Gerrit-Attention: Alexander Goncharov <chat(a)joursoir.net> Gerrit-Comment-Date: Fri, 30 Sep 2022 22:13:32 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: comment

1 0

[L] Change in flashrom[master]: dirtyjtag: Add DirtyJTAG programmer
by Jean THOMAS (Code Review) 01 Oct '22

01 Oct '22

Attention is currently required from: Felix Singer, Thomas Heijligen, Jean THOMAS, Alexander Goncharov. Hello Felix Singer, build bot (Jenkins), Nico Huber, Thomas Heijligen, Angel Pons, I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/flashrom/+/67878 to look at the new patch set (#8). Change subject: dirtyjtag: Add DirtyJTAG programmer ...................................................................... dirtyjtag: Add DirtyJTAG programmer Add a new programmer driver for the DirtyJTAG project (a USB-JTAG firmware for STM32 MCUs). Successfully tested with DirtyJTAG 1.4 running on an Olimex STM32-H103 development board and a SST25VF020B SPI flash chip. Change-Id: Ic43e9a014ed7d04e429e73b30c9dcfdde1a78913 Signed-off-by: Jean THOMAS <virgule(a)jeanthomas.me> --- M Makefile A dirtyjtag_spi.c M flashrom.8.tmpl M include/programmer.h M meson.build M meson_options.txt M programmer_table.c M test_build.sh 8 files changed, 372 insertions(+), 5 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/78/67878/8 -- To view, visit https://review.coreboot.org/c/flashrom/+/67878 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ic43e9a014ed7d04e429e73b30c9dcfdde1a78913 Gerrit-Change-Number: 67878 Gerrit-PatchSet: 8 Gerrit-Owner: Jean THOMAS <virgule(a)jeanthomas.me> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Felix Singer <felixsinger(a)posteo.net> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Thomas Heijligen <src(a)posteo.de> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Alexander Goncharov <chat(a)joursoir.net> Gerrit-Attention: Felix Singer <felixsinger(a)posteo.net> Gerrit-Attention: Thomas Heijligen <src(a)posteo.de> Gerrit-Attention: Jean THOMAS <virgule(a)jeanthomas.me> Gerrit-Attention: Alexander Goncharov <chat(a)joursoir.net> Gerrit-MessageType: newpatchset

1 0

[S] Change in flashrom[1.1.x]: test_build.sh: Use multiple cores if Make is used
by Felix Singer (Code Review) 30 Sep '22

30 Sep '22

Felix Singer has abandoned this change. ( https://review.coreboot.org/c/flashrom/+/68009 ) Change subject: test_build.sh: Use multiple cores if Make is used ...................................................................... Abandoned Lost interest. It takes too much effort to get trivial patches in -- To view, visit https://review.coreboot.org/c/flashrom/+/68009 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: 1.1.x Gerrit-Change-Id: Ia67e9202e49f1b4bc3301399a8ec741ac01c3ce0 Gerrit-Change-Number: 68009 Gerrit-PatchSet: 8 Gerrit-Owner: Felix Singer <felixsinger(a)posteo.net> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Thomas Heijligen <src(a)posteo.de> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-MessageType: abandon

1 0

[S] Change in flashrom[1.1.x]: test_build.sh: Improve robustness when dealing with empty $CC
by Felix Singer (Code Review) 30 Sep '22

30 Sep '22

Felix Singer has abandoned this change. ( https://review.coreboot.org/c/flashrom/+/68008 ) Change subject: test_build.sh: Improve robustness when dealing with empty $CC ...................................................................... Abandoned Lost interest. It takes too much effort to get trivial patches in -- To view, visit https://review.coreboot.org/c/flashrom/+/68008 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: 1.1.x Gerrit-Change-Id: Ia289b31291949f5cbc11484b8f1a7cb7a49bd2bb Gerrit-Change-Number: 68008 Gerrit-PatchSet: 8 Gerrit-Owner: Felix Singer <felixsinger(a)posteo.net> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Patrick Georgi <patrick(a)coreboot.org> Gerrit-MessageType: abandon

1 0

2023

2022

2021

2020

2019

2018

2017

flashrom-gerrit September 2022