flashrom-gerrit July 2022

flashrom-gerrit@flashrom.org

7 discussions

Change in flashrom[master]: chipset_enable.c: Remove futile attempt to disable lock
by Andy Pont (Code Review) 25 Nov '23

25 Nov '23

Andy Pont has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/48643 ) Change subject: chipset_enable.c: Remove futile attempt to disable lock ...................................................................... chipset_enable.c: Remove futile attempt to disable lock For all recent Intel chipsets (and possibly others) the ability to disable the lock fails. This leads to confusing messages being presented to the user where unlocking fails but the flash update process works correctly. Remove the unlock attempt which had alreayd been marked in the source code comments as "futile". Signed-off-by: Andy Pont <andy.pont(a)sdcsystems.com> Change-Id: Id70e132f8feb7b91cbf79d8cdf07744f8763e11b --- M chipset_enable.c 1 file changed, 0 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/43/48643/1 diff --git a/chipset_enable.c b/chipset_enable.c index 9205d0e..3ca6ba8 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -333,7 +333,6 @@ wanted |= (1 << 2); wanted |= (1 << 0); /* Set BIOS Write Enable */ - wanted &= ~(1 << 1); /* Disable lock (futile) */ /* Only write the register if it's necessary */ if (wanted != old) { -- To view, visit https://review.coreboot.org/c/flashrom/+/48643 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Id70e132f8feb7b91cbf79d8cdf07744f8763e11b Gerrit-Change-Number: 48643 Gerrit-PatchSet: 1 Gerrit-Owner: Andy Pont <andy.pont(a)sdcsystems.com> Gerrit-MessageType: newchange

3 3

Change in flashrom[master]: dediprog: Fix SF600 4BA mode
by Patrick Rudolph (Code Review) 25 Nov '23

25 Nov '23

Hello Patrick Rudolph, I'd like you to do a code review. Please visit https://review.coreboot.org/c/flashrom/+/34629 to review the following change. Change subject: dediprog: Fix SF600 4BA mode ...................................................................... dediprog: Fix SF600 4BA mode Flash chips greater than 16MiB require 4BA mode support. Current master doesn't support such mode as the SF600 uses PROTOCOL_V3. Fix protocol version check to support 4BA on PROTOCOL_V3, too. Tested on SF600 V:7.2.45 Able to read and write "IS25WP256" (32768 kB, SPI). Change-Id: I2d3089693fbd2f8f7717a8f71be242be131ce707 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M dediprog.c 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/29/34629/1 diff --git a/dediprog.c b/dediprog.c index 3566109..add478d 100644 --- a/dediprog.c +++ b/dediprog.c @@ -1160,7 +1160,7 @@ if (dediprog_devicetype == DEV_SF100 && protocol() == PROTOCOL_V1) spi_master_dediprog.features &= ~SPI_MASTER_NO_4BA_MODES; - if (protocol() == PROTOCOL_V2) + if (protocol() >= PROTOCOL_V2) spi_master_dediprog.features |= SPI_MASTER_4BA; if (register_spi_master(&spi_master_dediprog) || dediprog_set_leds(LED_NONE)) -- To view, visit https://review.coreboot.org/c/flashrom/+/34629 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I2d3089693fbd2f8f7717a8f71be242be131ce707 Gerrit-Change-Number: 34629 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

4 7

Change in flashrom[master]: flashchips: Add ISSI IS25LQ016
by Angel Pons (Code Review) 15 Aug '23

15 Aug '23

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/40431 ) Change subject: flashchips: Add ISSI IS25LQ016 ...................................................................... flashchips: Add ISSI IS25LQ016 Datasheet: http://www.issi.com/WW/pdf/25LQ016.pdf Tested all four PREW functions with a FT2232H. Change-Id: I02f19767b8a60fb2d37adab34894b6edb6ac4494 Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M flashchips.c M flashchips.h 2 files changed, 39 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/31/40431/1 diff --git a/flashchips.c b/flashchips.c index b4006df..a25f915 100644 --- a/flashchips.c +++ b/flashchips.c @@ -7049,6 +7049,44 @@ { .vendor = "ISSI", + .name = "IS25LQ016", + .bustype = BUS_SPI, + .manufacture_id = ISSI_ID_SPI, + .model_id = ISSI_IS25LQ016, + .total_size = 2048, + .page_size = 256, + /* OTP: 1024B total; read 0x4b; write 0xb1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2300, 3600}, + }, + + { + .vendor = "ISSI", .name = "IS25WP032", .bustype = BUS_SPI, .manufacture_id = ISSI_ID_SPI, diff --git a/flashchips.h b/flashchips.h index e5ef390..b5c0aeb 100644 --- a/flashchips.h +++ b/flashchips.h @@ -459,6 +459,7 @@ #define ISSI_IS25LP064 0x6017 #define ISSI_IS25LP128 0x6018 #define ISSI_IS25LP256 0x6019 +#define ISSI_IS25LQ016 0x1445 #define ISSI_IS25WP032 0x7016 #define ISSI_IS25WP064 0x7017 #define ISSI_IS25WP128 0x7018 -- To view, visit https://review.coreboot.org/c/flashrom/+/40431 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I02f19767b8a60fb2d37adab34894b6edb6ac4494 Gerrit-Change-Number: 40431 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

6 8

Change in flashrom[master]: flashchips: Added missing voltages
by Name of user not set (Code Review) 02 Jun '23

02 Jun '23

roman.stingler(a)gmail.com has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/40432 ) Change subject: flashchips: Added missing voltages ...................................................................... flashchips: Added missing voltages Signed-off-by: Roman Stingler <roman.stingler(a)gmail.com> Change-Id: I0825ab11e53c0b018b49173907e2b274a4cf1fab --- M flashchips.c 1 file changed, 9 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/32/40432/1 diff --git a/flashchips.c b/flashchips.c index b4006df..f2d9fc1 100644 --- a/flashchips.c +++ b/flashchips.c @@ -7650,6 +7650,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -7677,6 +7678,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -7704,6 +7706,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -7727,6 +7730,7 @@ .unlock = unlock_28f004s5, .write = write_82802ab, .read = read_memmapped, + .voltage = {2700, 3600}, }, { @@ -7755,6 +7759,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -7783,6 +7788,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -9972,6 +9978,7 @@ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, + .voltage = {2700, 3600}, }, { @@ -17550,6 +17557,7 @@ }, .write = write_jedec, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -17573,6 +17581,7 @@ }, .write = write_jedec, .read = read_memmapped, + .voltage = {4500, 5500}, }, { -- To view, visit https://review.coreboot.org/c/flashrom/+/40432 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I0825ab11e53c0b018b49173907e2b274a4cf1fab Gerrit-Change-Number: 40432 Gerrit-PatchSet: 1 Gerrit-Owner: roman.stingler(a)gmail.com Gerrit-MessageType: newchange

4 6

Change in flashrom[master]: flaschips.c: Fix building with CONFIG_DUMMY=no
by Arthur Heymans (Code Review) 21 Apr '23

21 Apr '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/47166 ) Change subject: flaschips.c: Fix building with CONFIG_DUMMY=no ...................................................................... flaschips.c: Fix building with CONFIG_DUMMY=no With CONFIG_DUMMY=yes dummuflasher.c is not linked in so there is definition of probe_variable_size. Change-Id: Ib9bae93fadc55cf133e837e63419da104a6298be Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M flashchips.c 1 file changed, 4 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/66/47166/1 diff --git a/flashchips.c b/flashchips.c index 48efb85..1681f42 100644 --- a/flashchips.c +++ b/flashchips.c @@ -19081,3 +19081,7 @@ }; const unsigned int flashchips_size = ARRAY_SIZE(flashchips); + +#if !CONFIG_DUMMY +int probe_variable_size(struct flashctx *flash) { return 0; }; +#endif -- To view, visit https://review.coreboot.org/c/flashrom/+/47166 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ib9bae93fadc55cf133e837e63419da104a6298be Gerrit-Change-Number: 47166 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

5 12

Change in flashrom[master]: buspirate: Add option for setting the aux pin
by Sean Anderson (Code Review) 13 Apr '23

13 Apr '23

Sean Anderson has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/43608 ) Change subject: buspirate: Add option for setting the aux pin ...................................................................... buspirate: Add option for setting the aux pin This adds a parameter to drive the aux pin low (or high if you explicitly want the previous behavior). Some boards need to have a reset pin driven low before the firmware can be safely flashed. With the Bus Pirate, this is most easily done with the auxiliary pin. Change-Id: Ieeecfdf1afc06dadda9b8f99547cd74854ca6775 Signed-off-by: Sean Anderson <seanga2(a)gmail.com> --- M buspirate_spi.c M flashrom.8.tmpl 2 files changed, 33 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/08/43608/1 diff --git a/buspirate_spi.c b/buspirate_spi.c index fdfc0e4..1ccb107 100644 --- a/buspirate_spi.c +++ b/buspirate_spi.c @@ -228,6 +228,7 @@ int serialspeed_index = -1; int ret = 0; int pullup = 0; + int aux = 1; dev = extract_programmer_param("dev"); if (dev && !strlen(dev)) { @@ -277,6 +278,17 @@ } free(tmp); + tmp = extract_programmer_param("aux"); + if (tmp) { + if (strcasecmp("high", tmp) == 0) + ; /* Default */ + else if (strcasecmp("low", tmp) == 0) + aux = 0; + else + msg_perr("Invalid AUX state, driving high by default.\n"); + } + free(tmp); + /* Default buffer size is 19: 16 bytes data, 3 bytes control. */ #define DEFAULT_BUFSIZE (16 + 3) bp_commbuf = malloc(DEFAULT_BUFSIZE); @@ -520,11 +532,18 @@ } /* Initial setup (SPI peripherals config): Enable power, CS high, AUX */ - bp_commbuf[0] = 0x40 | 0x0b; + bp_commbuf[0] = 0x40 | 0x09; if (pullup == 1) { bp_commbuf[0] |= (1 << 2); msg_pdbg("Enabling pull-up resistors.\n"); } + if (aux) { + bp_commbuf[0] |= (1 << 1); + msg_pdbg("Driving AUX high.\n"); + } else { + msg_pdbg("Driving AUX low.\n"); + } + ret = buspirate_sendrecv(bp_commbuf, 1, 1); if (ret) return 1; diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index db50d59..caf860c 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -902,6 +902,19 @@ .URLB "http://dangerousprototypes.com/docs/Practical_guide_to_Bus_Pirate_pull-up_r…" \ "in a guide by dangerousprototypes" . Only the external supply voltage (Vpu) is supported as of this writing. +.sp +An optional aux parameter specifies the state of the Bus Pirate auxiliary pin. +This may be used to drive the auxiliary pin high or low before a transfer. +Syntax is +.sp +.B " flashrom -p buspirate_spi:aux=state" +.sp +where +.B state +can be +.BR high " or " low . +The default +.BR state " is " high . .SS .BR "pickit2_spi " programmer .IP -- To view, visit https://review.coreboot.org/c/flashrom/+/43608 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ieeecfdf1afc06dadda9b8f99547cd74854ca6775 Gerrit-Change-Number: 43608 Gerrit-PatchSet: 1 Gerrit-Owner: Sean Anderson <seanga2(a)gmail.com> Gerrit-MessageType: newchange

6 14

Change in ...flashrom[master]: cli_classic: Report the gathered layout entries at level dbg
by Nico Huber (Code Review) 04 Nov '22

04 Nov '22

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/31012 Change subject: cli_classic: Report the gathered layout entries at level dbg ...................................................................... cli_classic: Report the gathered layout entries at level dbg Change-Id: I7678ba5138f0d722ee44747fe123f192abdd0ffd Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M cli_classic.c M layout.c M layout.h 3 files changed, 18 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/12/31012/1 diff --git a/cli_classic.c b/cli_classic.c index ced08c6..536ef24 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -645,6 +645,8 @@ goto out_shutdown; } + report_layout(layout); + flashrom_layout_set(fill_flash, layout); flashrom_flag_set(fill_flash, FLASHROM_FLAG_FORCE, !!force); #if CONFIG_INTERNAL == 1 diff --git a/layout.c b/layout.c index fa66238..c589d17 100644 --- a/layout.c +++ b/layout.c @@ -229,3 +229,17 @@ return ret; } + +void report_layout(const struct flashrom_layout *const l) +{ + unsigned int i; + + if (!l) + return; + + msg_gdbg("Gathered %zu layout entries:\n", l->num_entries); + for (i = 0; i < l->num_entries; ++i) { + msg_gdbg("%08"PRIx32":%08"PRIx32" %s\n", + l->entries[i].start, l->entries[i].end, l->entries[i].name); + } +} diff --git a/layout.h b/layout.h index eb54a4f..61311bc 100644 --- a/layout.h +++ b/layout.h @@ -59,4 +59,6 @@ int process_include_args(struct flashrom_layout *); +void report_layout(const struct flashrom_layout *); + #endif /* !__LAYOUT_H__ */ -- To view, visit https://review.coreboot.org/c/flashrom/+/31012 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I7678ba5138f0d722ee44747fe123f192abdd0ffd Gerrit-Change-Number: 31012 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

5 19

2023

2022

2021

2020

2019

2018

2017

flashrom-gerrit July 2022