July 2024 - flashrom-gerrit - mail.coreboot.org

[XS] Change in flashrom[main]: Add David Reguera as the Bus Pirate maintainer
by David Reguera Garcia (Code Review) 29 Jul '24

29 Jul '24

Attention is currently required from: Anastasia Klimchuk. David Reguera Garcia has posted comments on this change by David Reguera Garcia. ( https://review.coreboot.org/c/flashrom/+/83681?usp=email ) Change subject: Add David Reguera as the Bus Pirate maintainer ...................................................................... Patch Set 1: Code-Review+1 -- To view, visit https://review.coreboot.org/c/flashrom/+/83681?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: I0e298732a1464152c0d4cdc728bcdfd1b40ce770 Gerrit-Change-Number: 83681 Gerrit-PatchSet: 1 Gerrit-Owner: David Reguera Garcia <regueragarciadavid(a)gmail.com> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: David Reguera Garcia <regueragarciadavid(a)gmail.com> Gerrit-Attention: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Comment-Date: Mon, 29 Jul 2024 20:33:45 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[XS] Change in flashrom[main]: Add David Reguera as the Bus Pirate maintainer
by David Reguera Garcia (Code Review) 29 Jul '24

29 Jul '24

David Reguera Garcia has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/83681?usp=email ) Change subject: Add David Reguera as the Bus Pirate maintainer ...................................................................... Add David Reguera as the Bus Pirate maintainer Change-Id: I0e298732a1464152c0d4cdc728bcdfd1b40ce770 Signed-off-by: David Reguera Garcia <regueragarciadavid(a)gmail.com> --- M MAINTAINERS 1 file changed, 5 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/81/83681/1 diff --git a/MAINTAINERS b/MAINTAINERS index 7f859b7..619bc27 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -137,6 +137,11 @@ S: Maintained F: sb600spi.c +BUS PIRATE +M: David Reguera <regueragarciadavid(a)gmail.com> +S: Maintained +F: buspirate_spi.c + CH347 M: Nicholas Chin <nic.c3.14(a)gmail.com> S: Maintained -- To view, visit https://review.coreboot.org/c/flashrom/+/83681?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newchange Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: I0e298732a1464152c0d4cdc728bcdfd1b40ce770 Gerrit-Change-Number: 83681 Gerrit-PatchSet: 1 Gerrit-Owner: David Reguera Garcia <regueragarciadavid(a)gmail.com>

1 0

[XS] Change in flashrom[main]: manibuilder: Make curl follow redirects
by Anastasia Klimchuk (Code Review) 29 Jul '24

29 Jul '24

Attention is currently required from: Patrick Georgi. Anastasia Klimchuk has posted comments on this change by Patrick Georgi. ( https://review.coreboot.org/c/flashrom/+/83672?usp=email ) Change subject: manibuilder: Make curl follow redirects ...................................................................... Patch Set 1: Code-Review+2 -- To view, visit https://review.coreboot.org/c/flashrom/+/83672?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: I52f1c786a376f5c7394fa5bffc689e58f8691c75 Gerrit-Change-Number: 83672 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Georgi Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Patrick Georgi Gerrit-Comment-Date: Mon, 29 Jul 2024 11:11:46 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[XL] Change in flashrom[main]: Remove the Makefile
by Anastasia Klimchuk (Code Review) 29 Jul '24

29 Jul '24

Attention is currently required from: Peter Marheine. Anastasia Klimchuk has posted comments on this change by Peter Marheine. ( https://review.coreboot.org/c/flashrom/+/83673?usp=email ) Change subject: Remove the Makefile ...................................................................... Patch Set 2: (1 comment) Patchset: PS2: Thank you so much for your work! This is so cool! :) -- To view, visit https://review.coreboot.org/c/flashrom/+/83673?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: Ib3cf22cf636ef9b70527b734ffa34aead2a74edd Gerrit-Change-Number: 83673 Gerrit-PatchSet: 2 Gerrit-Owner: Peter Marheine <pmarheine(a)chromium.org> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Peter Marheine <pmarheine(a)chromium.org> Gerrit-Comment-Date: Mon, 29 Jul 2024 11:10:44 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No

1 0

[XL] Change in flashrom[main]: Remove the Makefile
by Anastasia Klimchuk (Code Review) 29 Jul '24

29 Jul '24

Attention is currently required from: Peter Marheine. Anastasia Klimchuk has posted comments on this change by Peter Marheine. ( https://review.coreboot.org/c/flashrom/+/83673?usp=email ) Change subject: Remove the Makefile ...................................................................... Patch Set 2: (4 comments) Patchset: PS2: I tried git grep -n 'Makefile' and found some stuff which is not covered in this patch: Doxyfile:1199:# Makefile in the HTML output directory. Running make will produce the docset in Doxyfile:1611:# bitmaps for formulas in the HTML output, but not in the Makefile that is Doxyfile:1948:# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI Doxyfile:1967:# so different doxyrules.make files included by the same Makefile don't util/manibuilder/Makefile:3:include Makefile.targets util/manibuilder/Makefile:15:include Makefile.anita util/manibuilder/README.md:71: make: *** [Makefile:1075: libflashrom.o] Error 1 The manibuilder directory doesn't have a meson.build file yet :( I guess we need it. The tricky thing is, it's not built from root build file... File doc/dev_guide/building_with_make.rst: PS2: Should this be removed from index file of dev_guide directory? I would expect sphinx to complain when building (or a warning at least) if index references non-existing file, did it complain? File doc/release_notes/v_1_5-devel.rst: https://review.coreboot.org/c/flashrom/+/83673/comment/23c94a9e_cb460dda?us… : PS2, Line 2: v1.5-devel I was thinking to have a generic name to this file, for example next_release.rst, "Next release", or something else without dates or version numbers. This way the name of the doc and url on the website stays the same, and at any time anyone can open "Next release" document and it always be exactly it: what is coming next. https://review.coreboot.org/c/flashrom/+/83673/comment/0d8bdbe1_e80efc9a?us… : PS2, Line 4: : This document describes the major changes to flashrom since the release : of version 1.4. These changes will be included in the future v1.5 release. In the same spirit, I would make the intro generic, so that we need to compose it once and it stays forever relevant. > This document describes the major changes that are expected to be included in the next release of flashrom. The work described below is currently available at HEAD only (see doc "building from source"), and keep in mind the changes are not yet released and might receive further bugfixes and improvements. Something like that :) -- To view, visit https://review.coreboot.org/c/flashrom/+/83673?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: Ib3cf22cf636ef9b70527b734ffa34aead2a74edd Gerrit-Change-Number: 83673 Gerrit-PatchSet: 2 Gerrit-Owner: Peter Marheine <pmarheine(a)chromium.org> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Peter Marheine <pmarheine(a)chromium.org> Gerrit-Comment-Date: Mon, 29 Jul 2024 11:09:56 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No

1 0

[M] Change in flashrom[main]: doc: Add doc for buspirate programmer
by Dreg (Code Review) 29 Jul '24

29 Jul '24

Attention is currently required from: Anastasia Klimchuk. Dreg has posted comments on this change by Anastasia Klimchuk. ( https://review.coreboot.org/c/flashrom/+/83471?usp=email ) Change subject: doc: Add doc for buspirate programmer ...................................................................... Patch Set 2: Code-Review+1 (1 comment) Patchset: PS2: The documentation is correct and remains relevant. If I think of improvements in the future, I'll make a pull request! Thanks for continuing to support this hardware! -- To view, visit https://review.coreboot.org/c/flashrom/+/83471?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: I5a57f08ea3fce0c78d73aa61b85ff7b0cff450b8 Gerrit-Change-Number: 83471 Gerrit-PatchSet: 2 Gerrit-Owner: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Dreg <dreg(a)rootkit.es> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Comment-Date: Mon, 29 Jul 2024 06:50:25 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: Yes

1 0

[XL] Change in flashrom[main]: Remove the Makefile
by Peter Marheine (Code Review) 29 Jul '24

29 Jul '24

Attention is currently required from: Anastasia Klimchuk, Peter Marheine. Hello Anastasia Klimchuk, build bot (Jenkins), I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/flashrom/+/83673?usp=email to look at the new patch set (#2). Change subject: Remove the Makefile ...................................................................... Remove the Makefile As was described in the version 1.4 release notes, this deletes the Makefile and supporting elements leaving Meson as the only supported buildsystem. Signed-off-by: Peter Marheine <pmarheine(a)chromium.org> Change-Id: Ib3cf22cf636ef9b70527b734ffa34aead2a74edd --- M .gitignore M MAINTAINERS D Makefile D Makefile.d/arch_test.h D Makefile.d/cc_test.c D Makefile.d/clock_gettime_test.c D Makefile.d/endian_test.h D Makefile.d/ft232h_test.c D Makefile.d/getopt_test.c D Makefile.d/linux_i2c_test.c D Makefile.d/linux_mtd_test.c D Makefile.d/linux_spi_test.c D Makefile.d/os_test.h D Makefile.d/pciutils_test.c D Makefile.d/utsname_test.c D Makefile.include M README.rst D doc/dev_guide/building_with_make.rst M doc/release_notes/index.rst A doc/release_notes/v_1_5-devel.rst M test_build.sh D util/ich_descriptors_tool/Makefile 22 files changed, 15 insertions(+), 1,816 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/73/83673/2 -- To view, visit https://review.coreboot.org/c/flashrom/+/83673?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newpatchset Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: Ib3cf22cf636ef9b70527b734ffa34aead2a74edd Gerrit-Change-Number: 83673 Gerrit-PatchSet: 2 Gerrit-Owner: Peter Marheine <pmarheine(a)chromium.org> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Attention: Peter Marheine <pmarheine(a)chromium.org>

1 0

[XL] Change in flashrom[main]: Remove the Makefile
by Peter Marheine (Code Review) 29 Jul '24

29 Jul '24

Peter Marheine has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/83673?usp=email ) Change subject: Remove the Makefile ...................................................................... Remove the Makefile As was described in the version 1.4 release notes, this deletes the Makefile and supporting elements leaving Meson as the only supported buildsystem. Change-Id: Ib3cf22cf636ef9b70527b734ffa34aead2a74edd --- M .gitignore M MAINTAINERS D Makefile D Makefile.d/arch_test.h D Makefile.d/cc_test.c D Makefile.d/clock_gettime_test.c D Makefile.d/endian_test.h D Makefile.d/ft232h_test.c D Makefile.d/getopt_test.c D Makefile.d/linux_i2c_test.c D Makefile.d/linux_mtd_test.c D Makefile.d/linux_spi_test.c D Makefile.d/os_test.h D Makefile.d/pciutils_test.c D Makefile.d/utsname_test.c D Makefile.include M README.rst D doc/dev_guide/building_with_make.rst M doc/release_notes/index.rst A doc/release_notes/v_1_5-devel.rst M test_build.sh D util/ich_descriptors_tool/Makefile 22 files changed, 15 insertions(+), 1,816 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/73/83673/1 diff --git a/.gitignore b/.gitignore index 4e38739..d1cf656 100644 --- a/.gitignore +++ b/.gitignore @@ -1,5 +1,4 @@ *.d -!Makefile.d/ *.o /.doctrees /.features diff --git a/MAINTAINERS b/MAINTAINERS index 7f859b7..bb16528 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -79,13 +79,9 @@ BUILD SYSTEM M: Peter Marheine <pmarheine(a)chromium.org> S: Maintained -F: Makefile* F: meson* -F: Makefile*/ F: */meson* -F: */Makefile* F: util/ich_descriptors_tool/meson* -F: util/ich_descriptors_tool/Makefile* ERASE/WRITE ALGORITHM M: Aarya Chaumal <aarya.chaumal(a)gmail.com> diff --git a/Makefile b/Makefile deleted file mode 100644 index 97f56b8..0000000 --- a/Makefile +++ /dev/null @@ -1,1150 +0,0 @@ -# -# This file is part of the flashrom project. -# -# Copyright (C) 2005 coresystems GmbH <stepan(a)coresystems.de> -# Copyright (C) 2009,2010,2012 Carl-Daniel Hailfinger -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# - -PROGRAM = flashrom - -############################################################################### -# Defaults for the toolchain. - -# If you want to cross-compile, just run e.g. -# make CC=i586-pc-msdosdjgpp-gcc -# You may have to specify STRIP/AR/RANLIB as well. -# -# Note for anyone editing this Makefile: gnumake will happily ignore any -# changes in this Makefile to variables set on the command line. -STRIP ?= strip -STRIP_ARGS = -s -INSTALL = install -PREFIX ?= /usr/local -MANDIR ?= $(PREFIX)/share/man -BASHCOMPDIR ?= $(PREFIX)/share/bash-completion/completions -CFLAGS ?= -Os -Wall -Wextra -Wno-unused-parameter -Wshadow -Wmissing-prototypes -Wwrite-strings -EXPORTDIR ?= . -RANLIB ?= ranlib -PKG_CONFIG ?= pkg-config -BUILD_DETAILS_FILE ?= build_details.txt -SPHINXBUILD ?= sphinx-build - -# The following parameter changes the default programmer that will be used if there is no -p/--programmer -# argument given when running flashrom. The predefined setting does not enable any default so that every -# user has to declare the programmer he wants to use on every run. The rationale for this to be not set -# (to e.g. the internal programmer) is that forgetting to specify this when working with another programmer -# easily puts the system attached to the default programmer at risk (e.g. you want to flash coreboot to another -# system attached to an external programmer while the default programmer is set to the internal programmer, and -# you forget to use the -p parameter. This would (try to) overwrite the existing firmware of the computer -# running flashrom). Please do not enable this without thinking about the possible consequences. Possible -# values can be found when running 'flashrom --list-supported' under the 'Supported programmers' section. -CONFIG_DEFAULT_PROGRAMMER_NAME ?= -# The following adds a default parameter for the default programmer set above (only). -CONFIG_DEFAULT_PROGRAMMER_ARGS ?= -# Example: compiling with -# make CONFIG_DEFAULT_PROGRAMMER_NAME=serprog CONFIG_DEFAULT_PROGRAMMER_ARGS="dev=/dev/ttyUSB0:1500000" -# would make executing './flashrom' (almost) equivialent to './flashrom -p serprog:dev=/dev/ttyUSB0:1500000'. - -# The user can provide CPP, C and LDFLAGS and the Makefile will extend these -override CPPFLAGS := $(CPPFLAGS) -override CFLAGS := $(CFLAGS) -override LDFLAGS := $(LDFLAGS) - -# If your compiler spits out excessive warnings, run make WARNERROR=no -# You shouldn't have to change this flag. -WARNERROR ?= yes - -ifeq ($(WARNERROR), yes) -override CFLAGS += -Werror -endif - -ifdef LIBS_BASE -PKG_CONFIG_LIBDIR ?= $(LIBS_BASE)/lib/pkgconfig -override CPPFLAGS += -I$(LIBS_BASE)/include -override LDFLAGS += -L$(LIBS_BASE)/lib -Wl,-rpath -Wl,$(LIBS_BASE)/lib -endif - -ifeq ($(CONFIG_STATIC),yes) -override LDFLAGS += -static -endif - -# Set LC_ALL=C to minimize influences of the locale. -# However, this won't work for the majority of relevant commands because they use the $(shell) function and -# GNU make does not relay variables exported within the makefile to their environment. -LC_ALL=C -export LC_ALL - -dummy_for_make_3_80:=$(shell printf "Build started on %s\n\n" "$$(date)" >$(BUILD_DETAILS_FILE)) - -# Provide an easy way to execute a command, print its output to stdout and capture any error message on stderr -# in the build details file together with the original stdout output. -debug_shell = $(shell export LC_ALL=C ; { echo 'exec: export LC_ALL=C ; { $(subst ','\'',$(1)) ; }' >&2; \ - { $(1) ; } | tee -a $(BUILD_DETAILS_FILE) ; echo >&2 ; } 2>>$(BUILD_DETAILS_FILE)) - -include Makefile.include - -############################################################################### -# Dependency handling. - -DEPENDS_ON_SERIAL := \ - CONFIG_BUSPIRATE_SPI \ - CONFIG_PONY_SPI \ - CONFIG_SERPROG \ - -DEPENDS_ON_SOCKETS := \ - CONFIG_SERPROG \ - -DEPENDS_ON_BITBANG_SPI := \ - CONFIG_DEVELOPERBOX_SPI \ - CONFIG_INTERNAL_X86 \ - CONFIG_NICINTEL_SPI \ - CONFIG_OGP_SPI \ - CONFIG_PONY_SPI \ - CONFIG_RAYER_SPI \ - -DEPENDS_ON_RAW_MEM_ACCESS := \ - CONFIG_ATAPROMISE \ - CONFIG_DRKAISER \ - CONFIG_GFXNVIDIA \ - CONFIG_INTERNAL \ - CONFIG_INTERNAL_X86 \ - CONFIG_IT8212 \ - CONFIG_NICINTEL \ - CONFIG_NICINTEL_EEPROM \ - CONFIG_NICINTEL_SPI \ - CONFIG_OGP_SPI \ - CONFIG_SATAMV \ - CONFIG_SATASII \ - -DEPENDS_ON_X86_MSR := \ - CONFIG_INTERNAL_X86 \ - -DEPENDS_ON_X86_PORT_IO := \ - CONFIG_ATAHPT \ - CONFIG_ATAPROMISE \ - CONFIG_INTERNAL_X86 \ - CONFIG_NIC3COM \ - CONFIG_NICNATSEMI \ - CONFIG_NICREALTEK \ - CONFIG_RAYER_SPI \ - CONFIG_SATAMV \ - -DEPENDS_ON_LIBPCI := \ - CONFIG_ASM106X \ - CONFIG_ATAHPT \ - CONFIG_ATAPROMISE \ - CONFIG_ATAVIA \ - CONFIG_DRKAISER \ - CONFIG_GFXNVIDIA \ - CONFIG_INTERNAL \ - CONFIG_IT8212 \ - CONFIG_NIC3COM \ - CONFIG_NICINTEL \ - CONFIG_NICINTEL_EEPROM \ - CONFIG_NICINTEL_SPI \ - CONFIG_NICNATSEMI \ - CONFIG_NICREALTEK \ - CONFIG_OGP_SPI \ - CONFIG_SATAMV \ - CONFIG_SATASII \ - -DEPENDS_ON_LIBUSB1 := \ - CONFIG_CH341A_SPI \ - CONFIG_CH347_SPI \ - CONFIG_DEDIPROG \ - CONFIG_DEVELOPERBOX_SPI \ - CONFIG_DIGILENT_SPI \ - CONFIG_PICKIT2_SPI \ - CONFIG_RAIDEN_DEBUG_SPI \ - CONFIG_STLINKV3_SPI \ - CONFIG_DIRTYJTAG_SPI \ - -DEPENDS_ON_LIBFTDI1 := \ - CONFIG_FT2232_SPI \ - CONFIG_USBBLASTER_SPI \ - -DEPENDS_ON_LIBJAYLINK := \ - CONFIG_JLINK_SPI \ - -DEPENDS_ON_LIB_NI845X := \ - CONFIG_NI845X_SPI \ - -DEPENDS_ON_LINUX_I2C := \ - CONFIG_MSTARDDC_SPI \ - CONFIG_PARADE_LSPCON \ - CONFIG_REALTEK_MST_I2C_SPI \ - CONFIG_MEDIATEK_I2C_SPI \ - -ifeq ($(CONFIG_ENABLE_LIBUSB1_PROGRAMMERS), no) -$(call disable_all,$(DEPENDS_ON_LIBUSB1)) -endif - -ifeq ($(CONFIG_ENABLE_LIBPCI_PROGRAMMERS), no) -$(call disable_all,$(DEPENDS_ON_LIBPCI)) -endif - -############################################################################### -# General OS-specific settings. -# 1. Prepare for later by gathering information about host and target OS -# 2. Set compiler flags and parameters according to OSes -# 3. Likewise verify user-supplied CONFIG_* variables. - -# HOST_OS is only used to work around local toolchain issues. -HOST_OS ?= $(shell uname) -ifeq ($(findstring MINGW, $(HOST_OS)), MINGW) -# Explicitly set CC = gcc on MinGW, otherwise: "cc: command not found". -CC = gcc -endif - -CC_WORKING := $(call c_compile_test, Makefile.d/cc_test.c) - -# Configs for dependencies. Can be overwritten by commandline -CONFIG_LIBFTDI1_VERSION := $(call dependency_version, libftdi1) -CONFIG_LIBFTDI1_CFLAGS := $(call dependency_cflags, libftdi1) -CONFIG_LIBFTDI1_LDFLAGS := $(call dependency_ldflags, libftdi1) - -CONFIG_NI845X_LIBRARY_PATH := 'C:\Program Files (x86)\National Instruments\NI-845x\MS Visual C' -CONFIG_LIB_NI845X_CFLAGS := -I$(CONFIG_NI845X_LIBRARY_PATH) -CONFIG_LIB_NI845X_LDFLAGS := -L$(CONFIG_NI845X_LIBRARY_PATH) -lni845x - -CONFIG_LIBJAYLINK_VERSION := $(call dependency_version, libjaylink) -CONFIG_LIBJAYLINK_CFLAGS := $(call dependency_cflags, libjaylink) -CONFIG_LIBJAYLINK_LDFLAGS := $(call dependency_ldflags, libjaylink) - -CONFIG_LIBUSB1_VERSION := $(call dependency_version, libusb-1.0) -CONFIG_LIBUSB1_CFLAGS := $(call dependency_cflags, libusb-1.0) -CONFIG_LIBUSB1_LDFLAGS := $(call dependency_ldflags, libusb-1.0) - -CONFIG_LIBPCI_VERSION := $(call dependency_version, libpci) -CONFIG_LIBPCI_CFLAGS := $(call dependency_cflags, libpci) -CONFIG_LIBPCI_LDFLAGS := $(call dependency_ldflags, libpci) - -CONFIG_SPHINXBUILD_VERSION := -CONFIG_SPHINXBUILD_MAJOR := 0 - - -# Determine the destination OS, architecture and endian -# IMPORTANT: The following lines must be placed before TARGET_OS, ARCH or ENDIAN -# is ever used (of course), but should come after any lines setting CC because -# the lines below use CC itself. -override TARGET_OS := $(call c_macro_test, Makefile.d/os_test.h) -override ARCH := $(call c_macro_test, Makefile.d/arch_test.h) -override ENDIAN := $(call c_macro_test, Makefile.d/endian_test.h) - - -HAS_LIBFTDI1 := $(call find_dependency, libftdi1) -HAS_LIB_NI845X := no -HAS_LIBJAYLINK := $(call find_dependency, libjaylink) -HAS_LIBUSB1 := $(call find_dependency, libusb-1.0) -HAS_LIBPCI := $(call find_dependency, libpci) - -HAS_GETOPT := $(call c_compile_test, Makefile.d/getopt_test.c) -HAS_FT232H := $(call c_compile_test, Makefile.d/ft232h_test.c, $(CONFIG_LIBFTDI1_CFLAGS)) -HAS_UTSNAME := $(call c_compile_test, Makefile.d/utsname_test.c) -HAS_CLOCK_GETTIME := $(call c_compile_test, Makefile.d/clock_gettime_test.c) -HAS_EXTERN_LIBRT := $(call c_link_test, Makefile.d/clock_gettime_test.c, , -lrt) -HAS_LINUX_MTD := $(call c_compile_test, Makefile.d/linux_mtd_test.c) -HAS_LINUX_SPI := $(call c_compile_test, Makefile.d/linux_spi_test.c) -HAS_LINUX_I2C := $(call c_compile_test, Makefile.d/linux_i2c_test.c) -HAS_PCIUTILS := $(call c_compile_test, Makefile.d/pciutils_test.c) -HAS_SERIAL := $(strip $(if $(filter $(TARGET_OS), DOS libpayload), no, yes)) -HAS_SPHINXBUILD := $(shell command -v $(SPHINXBUILD) >/dev/null 2>/dev/null && echo yes || echo no) -EXEC_SUFFIX := $(strip $(if $(filter $(TARGET_OS), DOS MinGW), .exe)) - -override CFLAGS += -Iinclude - -ifeq ($(TARGET_OS), DOS) -# DJGPP has odd uint*_t definitions which cause lots of format string warnings. -override CFLAGS += -Wno-format -override LDFLAGS += -lgetopt -endif - -ifeq ($(TARGET_OS), $(filter $(TARGET_OS), MinGW Cygwin)) -$(call mark_unsupported,$(DEPENDS_ON_RAW_MEM_ACCESS)) -$(call mark_unsupported,$(DEPENDS_ON_X86_PORT_IO)) -$(call mark_unsupported,$(DEPENDS_ON_X86_MSR)) -FEATURE_FLAGS += -D'IS_WINDOWS=1' -else -FEATURE_FLAGS += -D'IS_WINDOWS=0' -endif - -# FIXME: Should we check for Cygwin/MSVC as well? -ifeq ($(TARGET_OS), MinGW) -# MinGW doesn't have the ffs() function, but we can use gcc's __builtin_ffs(). -FLASHROM_CFLAGS += -Dffs=__builtin_ffs -# Some functions provided by Microsoft do not work as described in C99 specifications. This macro fixes that -# for MinGW. See http://sourceforge.net/p/mingw-w64/wiki2/printf%20and%20scanf%20family/ */ -FLASHROM_CFLAGS += -D__USE_MINGW_ANSI_STDIO=1 - -# For now we disable all PCI-based programmers on Windows/MinGW (no libpci). -$(call mark_unsupported,$(DEPENDS_ON_LIBPCI)) -# And programmers that need raw access. -$(call mark_unsupported,$(DEPENDS_ON_RAW_MEM_ACCESS)) - -else # No MinGW - -# NI USB-845x only supported on Windows at the moment -$(call mark_unsupported,CONFIG_NI845X_SPI) - -endif - -ifeq ($(TARGET_OS), libpayload) -ifeq ($(MAKECMDGOALS),) -.DEFAULT_GOAL := libflashrom.a -$(info Setting default goal to libflashrom.a) -endif -$(call mark_unsupported,CONFIG_DUMMY) -# libpayload does not provide the romsize field in struct pci_dev that the atapromise code requires. -$(call mark_unsupported,CONFIG_ATAPROMISE) -# Dediprog, Developerbox, USB-Blaster, PICkit2, CH341A and FT2232 are not supported with libpayload (missing libusb support). -$(call mark_unsupported,$(DEPENDS_ON_LIBUSB1) $(DEPENDS_ON_LIBFTDI) $(DEPENDS_ON_LIBJAYLINK)) -endif - -ifeq ($(HAS_LINUX_MTD), no) -$(call mark_unsupported,CONFIG_LINUX_MTD) -endif - -ifeq ($(HAS_LINUX_SPI), no) -$(call mark_unsupported,CONFIG_LINUX_SPI) -endif - -ifeq ($(HAS_LINUX_I2C), no) -$(call mark_unsupported,DEPENDS_ON_LINUX_I2C) -endif - -ifeq ($(TARGET_OS), Android) -# Android on x86 (currently) does not provide raw PCI port I/O operations. -$(call mark_unsupported,$(DEPENDS_ON_X86_PORT_IO)) -endif - -# Disable the internal programmer on unsupported architectures or systems -ifeq ($(or $(filter $(ARCH), x86), $(filter $(TARGET_OS), Linux)), ) -$(call mark_unsupported,CONFIG_INTERNAL) -endif - -ifeq ($(HAS_LIBPCI), no) -$(call mark_unsupported,$(DEPENDS_ON_LIBPCI)) -endif - -ifeq ($(HAS_LIBFTDI1), no) -$(call mark_unsupported,$(DEPENDS_ON_LIBFTDI1)) -endif - -ifeq ($(HAS_LIB_NI845X), no) -$(call mark_unsupported,$(DEPENDS_ON_LIB_NI845X)) -endif - -ifeq ($(HAS_LIBJAYLINK), no) -$(call mark_unsupported,$(DEPENDS_ON_LIBJAYLINK)) -endif - -ifeq ($(HAS_LIBUSB1), no) -$(call mark_unsupported,$(DEPENDS_ON_LIBUSB1)) -endif - -ifeq ($(HAS_SERIAL), no) -$(call mark_unsupported, $(DEPENDS_ON_SERIAL)) -endif - -ifeq ($(ENDIAN), little) -FEATURE_FLAGS += -D'__FLASHROM_LITTLE_ENDIAN__=1' -endif -ifeq ($(ENDIAN), big) -FEATURE_FLAGS += -D'__FLASHROM_BIG_ENDIAN__=1' -endif - -# PCI port I/O support is unimplemented on PPC/MIPS/SPARC and unavailable on ARM. -# Right now this means the drivers below only work on x86. -ifneq ($(ARCH), x86) -$(call mark_unsupported,$(DEPENDS_ON_X86_MSR)) -$(call mark_unsupported,$(DEPENDS_ON_X86_PORT_IO)) -endif - -# Additionally disable all drivers needing raw access (memory, PCI, port I/O) -# on architectures with unknown raw access properties. -# Right now those architectures are alpha hppa m68k sh s390 -ifneq ($(ARCH), $(filter $(ARCH), x86 mips ppc arm sparc arc e2k)) -$(call mark_unsupported,$(DEPENDS_ON_RAW_MEM_ACCESS)) -endif - -############################################################################### -# Flash chip drivers and bus support infrastructure. - -CHIP_OBJS = jedec.o printlock.o stm50.o w39.o w29ee011.o \ - sst28sf040.o 82802ab.o \ - sst49lfxxxc.o sst_fwhub.o edi.o flashchips.o spi.o spi25.o spi25_statusreg.o \ - spi95.o opaque.o sfdp.o en29lv640b.o at45db.o s25f.o \ - writeprotect.o writeprotect_ranges.o - -############################################################################### -# Library code. - -LIB_OBJS = libflashrom.o layout.o erasure_layout.o flashrom.o parallel.o programmer.o programmer_table.o \ - helpers.o helpers_fileio.o ich_descriptors.o fmap.o platform/endian_$(ENDIAN).o platform/memaccess.o - -ifeq ($(TARGET_OS), DOS) - LIB_OBJS += udelay_dos.o -else - LIB_OBJS += udelay.o -endif - -############################################################################### -# Frontend related stuff. - -CLI_OBJS = cli_classic.o cli_output.o cli_common.o print.o - -VERSION ?= $(shell cat ./VERSION) -VERSION_GIT ?= $(shell git describe 2>/dev/null) -ifneq ($(VERSION_GIT),) - VERSION := "$(VERSION) (git:$(VERSION_GIT))" -else - VERSION := "$(VERSION)" -endif - -# No spaces in release names unless set explicitly -RELEASENAME ?= $(shell echo "$(VERSION)" | sed -e 's/ /_/') - -############################################################################### -# Default settings of CONFIG_* variables. - -# Always enable internal/onboard support for now. -CONFIG_INTERNAL ?= yes -CONFIG_INTERNAL_X86 ?= yes - -# Always enable serprog for now. -CONFIG_SERPROG ?= yes - -# RayeR SPIPGM hardware support -CONFIG_RAYER_SPI ?= yes - -# ChromiumOS servo DUT debug board hardware support -CONFIG_RAIDEN_DEBUG_SPI ?= yes - -# PonyProg2000 SPI hardware support -CONFIG_PONY_SPI ?= yes - -# Always enable 3Com NICs for now. -CONFIG_NIC3COM ?= yes - -# Enable NVIDIA graphics cards. Note: write and erase do not work properly. -CONFIG_GFXNVIDIA ?= yes - -# Always enable SiI SATA controllers for now. -CONFIG_SATASII ?= yes - -# ASMedia ASM106x -CONFIG_ASM106X ?= yes - -# Highpoint (HPT) ATA/RAID controller support. -# IMPORTANT: This code is not yet working! -CONFIG_ATAHPT ?= no - -# VIA VT6421A LPC memory support -CONFIG_ATAVIA ?= yes - -# Promise ATA controller support. -CONFIG_ATAPROMISE ?= no - -# Always enable FT2232 SPI dongles for now. -CONFIG_FT2232_SPI ?= yes - -# Always enable Altera USB-Blaster dongles for now. -CONFIG_USBBLASTER_SPI ?= yes - -# MSTAR DDC support needs more tests/reviews/cleanups. -CONFIG_MSTARDDC_SPI ?= no - -# Always enable PICkit2 SPI dongles for now. -CONFIG_PICKIT2_SPI ?= yes - -# Always enable STLink V3 -CONFIG_STLINKV3_SPI ?= yes - -# Disables Parade LSPCON support until the i2c helper supports multiple systems. -CONFIG_PARADE_LSPCON ?= no - -# Disables MediaTek support until the i2c helper supports multiple systems. -CONFIG_MEDIATEK_I2C_SPI ?= no - -# Disables REALTEK_MST support until the i2c helper supports multiple systems. -CONFIG_REALTEK_MST_I2C_SPI ?= no - -# Always enable dummy tracing for now. -CONFIG_DUMMY ?= yes - -# Always enable Dr. Kaiser for now. -CONFIG_DRKAISER ?= yes - -# Always enable Realtek NICs for now. -CONFIG_NICREALTEK ?= yes - -# Disable National Semiconductor NICs until support is complete and tested. -CONFIG_NICNATSEMI ?= no - -# Always enable Intel NICs for now. -CONFIG_NICINTEL ?= yes - -# Always enable SPI on Intel NICs for now. -CONFIG_NICINTEL_SPI ?= yes - -# Always enable EEPROM on Intel NICs for now. -CONFIG_NICINTEL_EEPROM ?= yes - -# Always enable SPI on OGP cards for now. -CONFIG_OGP_SPI ?= yes - -# Always enable Bus Pirate SPI for now. -CONFIG_BUSPIRATE_SPI ?= yes - -# Always enable Dediprog SF100 for now. -CONFIG_DEDIPROG ?= yes - -# Always enable Developerbox emergency recovery for now. -CONFIG_DEVELOPERBOX_SPI ?= yes - -# Always enable Marvell SATA controllers for now. -CONFIG_SATAMV ?= yes - -# Enable Linux spidev and MTD interfaces by default. We disable them on non-Linux targets. -CONFIG_LINUX_MTD ?= yes -CONFIG_LINUX_SPI ?= yes - -# Always enable ITE IT8212F PATA controllers for now. -CONFIG_IT8212 ?= yes - -# Winchiphead CH341A -CONFIG_CH341A_SPI ?= yes - -# Winchiphead CH347 -CONFIG_CH347_SPI ?= yes - -# Digilent Development board JTAG -CONFIG_DIGILENT_SPI ?= yes - -# DirtyJTAG -CONFIG_DIRTYJTAG_SPI ?= yes - -# Disable J-Link for now. -CONFIG_JLINK_SPI ?= no - -# National Instruments USB-845x is Windows only and needs a proprietary library. -CONFIG_NI845X_SPI ?= no - -# Disable wiki printing by default. It is only useful if you have wiki access. -CONFIG_PRINT_WIKI ?= no - -# Minimum time in microseconds to suspend execution for (rather than polling) -# when a delay is required. Larger values may perform better on machines with -# low timer resolution, at the cost of increased power. -CONFIG_DELAY_MINIMUM_SLEEP_US ?= 100000 - -# Disable all features if CONFIG_NOTHING=yes is given unless CONFIG_EVERYTHING was also set -ifeq ($(CONFIG_NOTHING), yes) - ifeq ($(CONFIG_EVERYTHING), yes) - $(error Setting CONFIG_NOTHING=yes and CONFIG_EVERYTHING=yes does not make sense) - endif - $(foreach var, $(filter CONFIG_%, $(.VARIABLES)),\ - $(if $(filter yes, $($(var))),\ - $(eval $(var)=no))) -endif - -# Enable all features if CONFIG_EVERYTHING=yes is given -ifeq ($(CONFIG_EVERYTHING), yes) -$(foreach var, $(filter CONFIG_%, $(.VARIABLES)),\ - $(if $(filter no, $($(var))),\ - $(eval $(var)=yes))) -endif - -############################################################################### -# Handle CONFIG_* variables that depend on others set (and verified) above. - -# The external DMI decoder (dmidecode) does not work in libpayload. Bail out if the internal one got disabled. -ifeq ($(TARGET_OS), libpayload) -ifeq ($(CONFIG_INTERNAL), yes) -ifeq ($(CONFIG_INTERNAL_DMI), no) -UNSUPPORTED_FEATURES += CONFIG_INTERNAL_DMI=no -else -override CONFIG_INTERNAL_DMI = yes -endif -endif -endif - -# Use internal DMI/SMBIOS decoder by default instead of relying on dmidecode. -CONFIG_INTERNAL_DMI ?= yes - -############################################################################### -# Programmer drivers and programmer support infrastructure. -# Depending on the CONFIG_* variables set and verified above we set compiler flags and parameters below. - -ifdef CONFIG_DEFAULT_PROGRAMMER_NAME -FEATURE_FLAGS += -D'CONFIG_DEFAULT_PROGRAMMER_NAME=&programmer_$(CONFIG_DEFAULT_PROGRAMMER_NAME)' -else -FEATURE_FLAGS += -D'CONFIG_DEFAULT_PROGRAMMER_NAME=NULL' -endif - -FEATURE_FLAGS += -D'CONFIG_DEFAULT_PROGRAMMER_ARGS="$(CONFIG_DEFAULT_PROGRAMMER_ARGS)"' -FEATURE_FLAGS += -D'CONFIG_DELAY_MINIMUM_SLEEP_US=$(CONFIG_DELAY_MINIMUM_SLEEP_US)' - -################################################################################ - -ifeq ($(ARCH), x86) -ifeq ($(CONFIG_INTERNAL) $(CONFIG_INTERNAL_X86), yes yes) -FEATURE_FLAGS += -D'CONFIG_INTERNAL=1' -PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o \ - internal.o internal_par.o it87spi.o sb600spi.o superio.o amd_imc.o wbsio_spi.o mcp6x_spi.o \ - ichspi.o dmi.o known_boards.o -ACTIVE_PROGRAMMERS += internal -endif -else -ifeq ($(CONFIG_INTERNAL), yes) -FEATURE_FLAGS += -D'CONFIG_INTERNAL=1' -PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o internal.o internal_par.o known_boards.o -ACTIVE_PROGRAMMERS += internal -endif -endif - -ifeq ($(CONFIG_INTERNAL_DMI), yes) -FEATURE_FLAGS += -D'CONFIG_INTERNAL_DMI=1' -endif - -ifeq ($(CONFIG_SERPROG), yes) -FEATURE_FLAGS += -D'CONFIG_SERPROG=1' -PROGRAMMER_OBJS += serprog.o -ACTIVE_PROGRAMMERS += serprog -endif - -ifeq ($(CONFIG_RAYER_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_RAYER_SPI=1' -PROGRAMMER_OBJS += rayer_spi.o -ACTIVE_PROGRAMMERS += rayer_spi -endif - -ifeq ($(CONFIG_RAIDEN_DEBUG_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_RAIDEN_DEBUG_SPI=1' -PROGRAMMER_OBJS += raiden_debug_spi.o -ACTIVE_PROGRAMMERS += raiden_debug_spi -endif - -ifeq ($(CONFIG_PONY_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_PONY_SPI=1' -PROGRAMMER_OBJS += pony_spi.o -ACTIVE_PROGRAMMERS += pony_spi -endif - -ifeq ($(CONFIG_NIC3COM), yes) -FEATURE_FLAGS += -D'CONFIG_NIC3COM=1' -PROGRAMMER_OBJS += nic3com.o -ACTIVE_PROGRAMMERS += nic3com -endif - -ifeq ($(CONFIG_GFXNVIDIA), yes) -FEATURE_FLAGS += -D'CONFIG_GFXNVIDIA=1' -PROGRAMMER_OBJS += gfxnvidia.o -ACTIVE_PROGRAMMERS += gfxnvidia -endif - -ifeq ($(CONFIG_SATASII), yes) -FEATURE_FLAGS += -D'CONFIG_SATASII=1' -PROGRAMMER_OBJS += satasii.o -ACTIVE_PROGRAMMERS += satasii -endif - -ifeq ($(CONFIG_ASM106X), yes) -FEATURE_FLAGS += -D'CONFIG_ASM106X=1' -PROGRAMMER_OBJS += asm106x.o -ACTIVE_PROGRAMMERS += asm106x -endif - -ifeq ($(CONFIG_ATAHPT), yes) -FEATURE_FLAGS += -D'CONFIG_ATAHPT=1' -PROGRAMMER_OBJS += atahpt.o -ACTIVE_PROGRAMMERS += atahpt -endif - -ifeq ($(CONFIG_ATAVIA), yes) -FEATURE_FLAGS += -D'CONFIG_ATAVIA=1' -PROGRAMMER_OBJS += atavia.o -ACTIVE_PROGRAMMERS += atavia -endif - -ifeq ($(CONFIG_ATAPROMISE), yes) -FEATURE_FLAGS += -D'CONFIG_ATAPROMISE=1' -PROGRAMMER_OBJS += atapromise.o -ACTIVE_PROGRAMMERS += atapromise -endif - -ifeq ($(CONFIG_IT8212), yes) -FEATURE_FLAGS += -D'CONFIG_IT8212=1' -PROGRAMMER_OBJS += it8212.o -ACTIVE_PROGRAMMERS += it8212 -endif - -ifeq ($(CONFIG_FT2232_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_FT2232_SPI=1' -PROGRAMMER_OBJS += ft2232_spi.o -ACTIVE_PROGRAMMERS += ft2232_spi -endif - -ifeq ($(CONFIG_USBBLASTER_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_USBBLASTER_SPI=1' -PROGRAMMER_OBJS += usbblaster_spi.o -ACTIVE_PROGRAMMERS += usbblaster_spi -endif - -ifeq ($(CONFIG_PICKIT2_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_PICKIT2_SPI=1' -PROGRAMMER_OBJS += pickit2_spi.o -ACTIVE_PROGRAMMERS += pickit2_spi -endif - -ifeq ($(CONFIG_STLINKV3_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_STLINKV3_SPI=1' -PROGRAMMER_OBJS += stlinkv3_spi.o -ACTIVE_PROGRAMMERS += stlinkv3_spi -endif - -ifeq ($(CONFIG_PARADE_LSPCON), yes) -FEATURE_FLAGS += -D'CONFIG_PARADE_LSPCON=1' -PROGRAMMER_OBJS += parade_lspcon.o -ACTIVE_PROGRAMMERS += parade_lspcon -endif - -ifeq ($(CONFIG_MEDIATEK_I2C_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_MEDIATEK_I2C_SPI=1' -PROGRAMMER_OBJS += mediatek_i2c_spi.o -ACTIVE_PROGRAMMERS += mediatek_i2c_spi -endif - -ifeq ($(CONFIG_REALTEK_MST_I2C_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_REALTEK_MST_I2C_SPI=1' -PROGRAMMER_OBJS += realtek_mst_i2c_spi.o -ACTIVE_PROGRAMMERS += realtek_mst_i2c_spi -endif - -ifeq ($(CONFIG_DUMMY), yes) -FEATURE_FLAGS += -D'CONFIG_DUMMY=1' -PROGRAMMER_OBJS += dummyflasher.o -ACTIVE_PROGRAMMERS += dummyflasher -endif - -ifeq ($(CONFIG_DRKAISER), yes) -FEATURE_FLAGS += -D'CONFIG_DRKAISER=1' -PROGRAMMER_OBJS += drkaiser.o -ACTIVE_PROGRAMMERS += drkaiser -endif - -ifeq ($(CONFIG_NICREALTEK), yes) -FEATURE_FLAGS += -D'CONFIG_NICREALTEK=1' -PROGRAMMER_OBJS += nicrealtek.o -ACTIVE_PROGRAMMERS += nicrealtek -endif - -ifeq ($(CONFIG_NICNATSEMI), yes) -FEATURE_FLAGS += -D'CONFIG_NICNATSEMI=1' -PROGRAMMER_OBJS += nicnatsemi.o -ACTIVE_PROGRAMMERS += nicnatsemi -endif - -ifeq ($(CONFIG_NICINTEL), yes) -FEATURE_FLAGS += -D'CONFIG_NICINTEL=1' -PROGRAMMER_OBJS += nicintel.o -ACTIVE_PROGRAMMERS += nicintel -endif - -ifeq ($(CONFIG_NICINTEL_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_NICINTEL_SPI=1' -PROGRAMMER_OBJS += nicintel_spi.o -ACTIVE_PROGRAMMERS += nicintel_spi -endif - -ifeq ($(CONFIG_NICINTEL_EEPROM), yes) -FEATURE_FLAGS += -D'CONFIG_NICINTEL_EEPROM=1' -PROGRAMMER_OBJS += nicintel_eeprom.o -ACTIVE_PROGRAMMERS += nicintel_eeprom -endif - -ifeq ($(CONFIG_OGP_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_OGP_SPI=1' -PROGRAMMER_OBJS += ogp_spi.o -ACTIVE_PROGRAMMERS += ogp_spi -endif - -ifeq ($(CONFIG_BUSPIRATE_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_BUSPIRATE_SPI=1' -PROGRAMMER_OBJS += buspirate_spi.o -ACTIVE_PROGRAMMERS += buspirate_spi -endif - -ifeq ($(CONFIG_DEDIPROG), yes) -FEATURE_FLAGS += -D'CONFIG_DEDIPROG=1' -PROGRAMMER_OBJS += dediprog.o -ACTIVE_PROGRAMMERS += dediprog -endif - -ifeq ($(CONFIG_DEVELOPERBOX_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_DEVELOPERBOX_SPI=1' -PROGRAMMER_OBJS += developerbox_spi.o -ACTIVE_PROGRAMMERS += developerbox_spi -endif - -ifeq ($(CONFIG_SATAMV), yes) -FEATURE_FLAGS += -D'CONFIG_SATAMV=1' -PROGRAMMER_OBJS += satamv.o -ACTIVE_PROGRAMMERS += satamv -endif - -ifeq ($(CONFIG_LINUX_MTD), yes) -FEATURE_FLAGS += -D'CONFIG_LINUX_MTD=1' -PROGRAMMER_OBJS += linux_mtd.o -ACTIVE_PROGRAMMERS += linux_mtd -endif - -ifeq ($(CONFIG_LINUX_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_LINUX_SPI=1' -PROGRAMMER_OBJS += linux_spi.o -ACTIVE_PROGRAMMERS += linux_spi -endif - -ifeq ($(CONFIG_MSTARDDC_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_MSTARDDC_SPI=1' -PROGRAMMER_OBJS += mstarddc_spi.o -ACTIVE_PROGRAMMERS += mstarddc_spi -endif - -ifeq ($(CONFIG_CH341A_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_CH341A_SPI=1' -PROGRAMMER_OBJS += ch341a_spi.o -ACTIVE_PROGRAMMERS += ch341a_spi -endif - -ifeq ($(CONFIG_CH347_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_CH347_SPI=1' -PROGRAMMER_OBJS += ch347_spi.o -endif - -ifeq ($(CONFIG_DIGILENT_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_DIGILENT_SPI=1' -PROGRAMMER_OBJS += digilent_spi.o -ACTIVE_PROGRAMMERS += digilent_spi -endif - -ifeq ($(CONFIG_DIRTYJTAG_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_DIRTYJTAG_SPI=1' -PROGRAMMER_OBJS += dirtyjtag_spi.o -ACTIVE_PROGRAMMERS += dirtyjtag_spi -endif - -ifeq ($(CONFIG_JLINK_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_JLINK_SPI=1' -PROGRAMMER_OBJS += jlink_spi.o -ACTIVE_PROGRAMMERS += jlink_spi -endif - -ifeq ($(CONFIG_NI845X_SPI), yes) -FEATURE_FLAGS += -D'CONFIG_NI845X_SPI=1' -PROGRAMMER_OBJS += ni845x_spi.o -ACTIVE_PROGRAMMERS += ni845x_spi -endif - -USE_BITBANG_SPI := $(if $(call filter_deps,$(DEPENDS_ON_BITBANG_SPI)),yes,no) -ifeq ($(USE_BITBANG_SPI), yes) -LIB_OBJS += bitbang_spi.o -endif - -USE_LINUX_I2C := $(if $(call filter_deps,$(DEPENDS_ON_LINUX_I2C)),yes,no) -ifeq ($(USE_LINUX_I2C), yes) -LIB_OBJS += i2c_helper_linux.o -endif - -USE_SERIAL := $(if $(call filter_deps,$(DEPENDS_ON_SERIAL)),yes,no) -ifeq ($(USE_SERIAL), yes) -LIB_OBJS += serial.o -ifeq ($(TARGET_OS), Linux) -LIB_OBJS += custom_baud_linux.o -else -ifeq ($(TARGET_OS), Darwin) -LIB_OBJS += custom_baud_darwin.o -else -LIB_OBJS += custom_baud.o -endif -endif -endif - -USE_SOCKETS := $(if $(call filter_deps,$(DEPENDS_ON_SOCKETS)),yes,no) -ifeq ($(USE_SOCKETS), yes) -ifeq ($(TARGET_OS), SunOS) -override LDFLAGS += -lsocket -lnsl -endif -endif - -USE_X86_MSR := $(if $(call filter_deps,$(DEPENDS_ON_X86_MSR)),yes,no) -ifeq ($(USE_X86_MSR), yes) -PROGRAMMER_OBJS += hwaccess_x86_msr.o -endif - -USE_X86_PORT_IO := $(if $(call filter_deps,$(DEPENDS_ON_X86_PORT_IO)),yes,no) -ifeq ($(USE_X86_PORT_IO), yes) -FEATURE_FLAGS += -D'__FLASHROM_HAVE_OUTB__=1' -PROGRAMMER_OBJS += hwaccess_x86_io.o -endif - -USE_RAW_MEM_ACCESS := $(if $(call filter_deps,$(DEPENDS_ON_RAW_MEM_ACCESS)),yes,no) -ifeq ($(USE_RAW_MEM_ACCESS), yes) -PROGRAMMER_OBJS += hwaccess_physmap.o -endif - -ifeq (Darwin yes, $(TARGET_OS) $(filter $(USE_X86_MSR) $(USE_X86_PORT_IO) $(USE_RAW_MEM_ACCESS), yes)) -override LDFLAGS += -framework IOKit -framework DirectHW -endif - -ifeq (NetBSD yes, $(TARGET_OS) $(filter $(USE_X86_MSR) $(USE_X86_PORT_IO), yes)) -override LDFLAGS += -l$(shell uname -p) -endif - -ifeq (OpenBSD yes, $(TARGET_OS) $(filter $(USE_X86_MSR) $(USE_X86_PORT_IO), yes)) -override LDFLAGS += -l$(shell uname -m) -endif - -USE_LIBPCI := $(if $(call filter_deps,$(DEPENDS_ON_LIBPCI)),yes,no) -ifeq ($(USE_LIBPCI), yes) -PROGRAMMER_OBJS += pcidev.o -override CFLAGS += $(CONFIG_LIBPCI_CFLAGS) -override LDFLAGS += $(CONFIG_LIBPCI_LDFLAGS) -endif - -USE_LIBUSB1 := $(if $(call filter_deps,$(DEPENDS_ON_LIBUSB1)),yes,no) -ifeq ($(USE_LIBUSB1), yes) -override CFLAGS += $(CONFIG_LIBUSB1_CFLAGS) -override LDFLAGS += $(CONFIG_LIBUSB1_LDFLAGS) -PROGRAMMER_OBJS +=usbdev.o usb_device.o -endif - -USE_LIBFTDI1 := $(if $(call filter_deps,$(DEPENDS_ON_LIBFTDI1)),yes,no) -ifeq ($(USE_LIBFTDI1), yes) -override CFLAGS += $(CONFIG_LIBFTDI1_CFLAGS) -override LDFLAGS += $(CONFIG_LIBFTDI1_LDFLAGS) -ifeq ($(HAS_FT232H), yes) -FEATURE_FLAGS += -D'HAVE_FT232H=1' -endif -endif - -USE_LIB_NI845X := $(if $(call filter_deps,$(DEPENDS_ON_LIB_NI845X)),yes,no) -ifeq ($(USE_LIB_NI845X), yes) -override CFLAGS += $(CONFIG_LIB_NI845X_CFLAGS) -override LDFLAGS += $(CONFIG_LIB_NI845X_LDFLAGS) -endif - -USE_LIBJAYLINK := $(if $(call filter_deps,$(DEPENDS_ON_LIBJAYLINK)),yes,no) -ifeq ($(USE_LIBJAYLINK), yes) -override CFLAGS += $(CONFIG_LIBJAYLINK_CFLAGS) -override LDFLAGS += $(CONFIG_LIBJAYLINK_LDFLAGS) -endif - -ifeq ($(CONFIG_PRINT_WIKI), yes) -FEATURE_FLAGS += -D'CONFIG_PRINT_WIKI=1' -CLI_OBJS += print_wiki.o -endif - -ifeq ($(HAS_UTSNAME), yes) -FEATURE_FLAGS += -D'HAVE_UTSNAME=1' -endif - -ifeq ($(HAS_CLOCK_GETTIME), yes) -FEATURE_FLAGS += -D'HAVE_CLOCK_GETTIME=1' -ifeq ($(HAS_EXTERN_LIBRT), yes) -override LDFLAGS += -lrt -endif -endif - -ifeq ($(HAS_GETOPT), yes) -override CFLAGS += -D'HAVE_GETOPT_H=1' -endif - -ifeq ($(HAS_PCIUTILS), yes) -override CFLAGS += -D'HAVE_PCIUTILS_PCI_H=1' -endif - -OBJS = $(CHIP_OBJS) $(PROGRAMMER_OBJS) $(LIB_OBJS) - -ifeq ($(HAS_SPHINXBUILD), yes) -override CONFIG_SPHINXBUILD_VERSION := $(shell $(SPHINXBUILD) --version | cut -d' ' -f2 ) -override CONFIG_SPHINXBUILD_MAJOR := $(shell echo "$(CONFIG_SPHINXBUILD_VERSION)" | cut -d'.' -f1 ) -endif - - -all: $(PROGRAM)$(EXEC_SUFFIX) $(call has_dependency, $(HAS_SPHINXBUILD), man8/$(PROGRAM).8) -ifeq ($(ARCH), x86) - @+$(MAKE) -C util/ich_descriptors_tool/ HOST_OS=$(HOST_OS) TARGET_OS=$(TARGET_OS) -endif - -config: - @echo Building flashrom version $(VERSION) - @printf "C compiler found: " - @if [ $(CC_WORKING) = yes ]; \ - then $(CC) --version 2>/dev/null | head -1; \ - else echo no; echo Aborting.; exit 1; fi - @echo "Target arch: $(ARCH)" - @if [ $(ARCH) = unknown ]; then echo Aborting.; exit 1; fi - @echo "Target OS: $(TARGET_OS)" - @if [ $(TARGET_OS) = unknown ]; then echo Aborting.; exit 1; fi - @if [ $(TARGET_OS) = libpayload ] && ! $(CC) --version 2>&1 | grep -q coreboot; then \ - echo " Warning: It seems you are not using coreboot's reference compiler."; \ - echo " This might work but usually does not, please beware."; fi - @echo "Target endian: $(ENDIAN)" - @if [ $(ENDIAN) = unknown ]; then echo Aborting.; exit 1; fi - @echo Dependency libpci found: $(HAS_LIBPCI) $(CONFIG_LIBPCI_VERSION) - @if [ $(HAS_LIBPCI) = yes ]; then \ - echo " CFLAGS: $(CONFIG_LIBPCI_CFLAGS)"; \ - echo " LDFLAGS: $(CONFIG_LIBPCI_LDFLAGS)"; \ - fi - @echo Dependency libusb1 found: $(HAS_LIBUSB1) $(CONFIG_LIBUSB1_VERSION) - @if [ $(HAS_LIBUSB1) = yes ]; then \ - echo " CFLAGS: $(CONFIG_LIBUSB1_CFLAGS)"; \ - echo " LDFLAGS: $(CONFIG_LIBUSB1_LDFLAGS)"; \ - fi - @echo Dependency libjaylink found: $(HAS_LIBJAYLINK) $(CONFIG_LIBJAYLINK_VERSION) - @if [ $(HAS_LIBJAYLINK) = yes ]; then \ - echo " CFLAGS: $(CONFIG_LIBJAYLINK_CFLAGS)"; \ - echo " LDFLAGS: $(CONFIG_LIBJAYLINK_LDFLAGS)"; \ - fi - @echo Dependency NI-845x found: $(HAS_LIB_NI845X) - @if [ $(HAS_LIB_NI845X) = yes ]; then \ - echo " CFLAGS: $(CONFIG_LIB_NI845X_CFLAGS)"; \ - echo " LDFLAGS: $(CONFIG_LIB_NI845X_LDFLAGS)"; \ - fi - @echo Dependency libftdi1 found: $(HAS_LIBFTDI1) $(CONFIG_LIBFTDI1_VERSION) - @if [ $(HAS_LIBFTDI1) = yes ]; then \ - echo " Checking for \"TYPE_232H\" in \"enum ftdi_chip_type\": $(HAS_FT232H)"; \ - echo " CFLAGS: $(CONFIG_LIBFTDI1_CFLAGS)"; \ - echo " LDFLAGS: $(CONFIG_LIBFTDI1_LDFLAGS)"; \ - fi - @echo "Checking for header \"getopt.h\": $(HAS_GETOPT)" - @echo "Checking for header \"mtd/mtd-user.h\": $(HAS_LINUX_MTD)" - @echo "Checking for header \"linux/spi/spidev.h\": $(HAS_LINUX_SPI)" - @echo "Checking for header \"linux/i2c-dev.h\": $(HAS_LINUX_I2C)" - @echo "Checking for header \"linux/i2c.h\": $(HAS_LINUX_I2C)" - @echo "Checking for header \"sys/utsname.h\": $(HAS_UTSNAME)" - @echo "Checking for header \"pciutils/pci.h\": $(HAS_PCIUTILS)" - @echo "Checking for function \"clock_gettime\": $(HAS_CLOCK_GETTIME)" - @echo "Checking for external \"librt\": $(HAS_EXTERN_LIBRT)" - @if ! [ "$(PROGRAMMER_OBJS)" ]; then \ - echo "You have to enable at least one programmer driver!"; \ - exit 1; \ - fi - @if [ "$(UNSUPPORTED_FEATURES)" ]; then \ - echo "The following features are unavailable on your machine: $(UNSUPPORTED_FEATURES)" \ - exit 1; \ - fi - @echo "Checking for program \"sphinx-build\": $(HAS_SPHINXBUILD) $(CONFIG_SPHINXBUILD_VERSION)" - -%.o: %.c | config - $(CC) -MMD $(CFLAGS) $(CPPFLAGS) $(FLASHROM_CFLAGS) $(FEATURE_FLAGS) -D'FLASHROM_VERSION=$(VERSION)' -o $@ -c $< - -$(PROGRAM)$(EXEC_SUFFIX): $(CLI_OBJS) libflashrom.a - $(CC) -o $@ $^ $(LDFLAGS) - -libflashrom.a: $(OBJS) - $(AR) rcs $@ $^ - $(RANLIB) $@ - -man8/$(PROGRAM).8: doc/* -# When using sphinx-build prior to version 4.x, man pages are output -# to a directory named "8" instead of expected "man8". We fix that -# by renaming "8" to "man8" and creating symlink "8" pointing to "man8". - @if [ "$(HAS_SPHINXBUILD)" = "yes" ]; then \ - $(SPHINXBUILD) -Drelease=$(VERSION) -b man doc .; \ - if [ "$(CONFIG_SPHINXBUILD_MAJOR)" -lt 4 ]; then \ - if [ -d 8 -a ! -L 8 ]; then \ - rm -rf man8; \ - mv 8 man8; \ - ln -s man8 8; \ - fi \ - fi \ - else \ - echo "$(SPHINXBUILD) not found. Can't build man-page"; \ - exit 1; \ - fi - -$(PROGRAM).bash: util/$(PROGRAM).bash-completion.tmpl - @# Add to the bash completion file a list of enabled programmers. - sed -e 's/@PROGRAMMERS@/$(ACTIVE_PROGRAMMERS)/g' <$< >$@ - -strip: $(PROGRAM)$(EXEC_SUFFIX) - $(STRIP) $(STRIP_ARGS) $(PROGRAM)$(EXEC_SUFFIX) - -# Make sure to add all names of generated binaries here. -# This includes all frontends and libflashrom. -# We don't use EXEC_SUFFIX here because we want to clean everything. -clean: - rm -rf $(PROGRAM) $(PROGRAM).exe libflashrom.a $(filter-out Makefile.d, $(wildcard *.d *.o platform/*.d platform/*.o)) \ - man8 8 .doctrees $(PROGRAM).bash $(BUILD_DETAILS_FILE) - @+$(MAKE) -C util/ich_descriptors_tool/ clean - -install: $(PROGRAM)$(EXEC_SUFFIX) $(call has_dependency, $(HAS_SPHINXBUILD), man8/$(PROGRAM).8) $(PROGRAM).bash - mkdir -p $(DESTDIR)$(PREFIX)/sbin - $(INSTALL) -m 0755 $(PROGRAM)$(EXEC_SUFFIX) $(DESTDIR)$(PREFIX)/sbin - mkdir -p $(DESTDIR)$(BASHCOMPDIR) - $(INSTALL) -m 0644 $(PROGRAM).bash $(DESTDIR)$(BASHCOMPDIR) -ifeq ($(HAS_SPHINXBUILD), yes) - mkdir -p $(DESTDIR)$(MANDIR)/man8 - $(INSTALL) -m 0644 man8/$(PROGRAM).8 $(DESTDIR)$(MANDIR)/man8 -endif - -libinstall: libflashrom.a include/libflashrom.h - mkdir -p $(DESTDIR)$(PREFIX)/lib - $(INSTALL) -m 0644 libflashrom.a $(DESTDIR)$(PREFIX)/lib - mkdir -p $(DESTDIR)$(PREFIX)/include - $(INSTALL) -m 0644 include/libflashrom.h $(DESTDIR)$(PREFIX)/include - -_export: man8/$(PROGRAM).8 - @rm -rf "$(EXPORTDIR)/flashrom-$(RELEASENAME)" - @mkdir -p "$(EXPORTDIR)/flashrom-$(RELEASENAME)" - @git archive HEAD | tar -x -C "$(EXPORTDIR)/flashrom-$(RELEASENAME)" -# Generate versioninfo.inc containing metadata that would not be available in exported sources otherwise. - @echo "VERSION = $(VERSION)" > "$(EXPORTDIR)/flashrom-$(RELEASENAME)/versioninfo.inc" -# Restore modification date of all tracked files not marked 'export-ignore' in .gitattributes. -# sed is required to filter out file names having the attribute set. -# The sed program saves the file name in the hold buffer and then checks if the respective value is 'set'. -# If so it ignores the rest of the program, which otherwise restores the file name and prints it. - @git ls-tree -r -z -t --full-name --name-only HEAD | \ - git check-attr -z --stdin export-ignore | \ - sed -zne 'x;n;n;{/^set$$/b;};x;p;' | \ - xargs -0 sh -c 'for f; do \ - touch -d $$(git log --pretty=format:%cI -1 HEAD -- "$$f") \ - "$(EXPORTDIR)/flashrom-$(RELEASENAME)/$$f"; \ - done' dummy_arg0 - -export: _export - @echo "Exported $(EXPORTDIR)/flashrom-$(RELEASENAME)/" - - -# TAROPTIONS reduces information leakage from the packager's system. -# If other tar programs support command line arguments for setting uid/gid of -# stored files, they can be handled here as well. -TAROPTIONS = $(shell LC_ALL=C tar --version|grep -q GNU && echo "--owner=root --group=root") - -tarball: _export - @tar -cj --format=ustar -f "$(EXPORTDIR)/flashrom-$(RELEASENAME).tar.bz2" -C $(EXPORTDIR)/ \ - $(TAROPTIONS) "flashrom-$(RELEASENAME)/" -# Delete the exported directory again because it is most likely what's expected by the user. - @rm -rf "$(EXPORTDIR)/flashrom-$(RELEASENAME)" - @echo Created "$(EXPORTDIR)/flashrom-$(RELEASENAME).tar.bz2" - -libpayload: clean - make CC="CC=i386-elf-gcc lpgcc" AR=i386-elf-ar RANLIB=i386-elf-ranlib - -.PHONY: all install clean distclean config _export export tarball libpayload - -# Disable implicit suffixes and built-in rules (for performance and profit) -.SUFFIXES: - --include $(OBJS:.o=.d) diff --git a/Makefile.d/arch_test.h b/Makefile.d/arch_test.h deleted file mode 100644 index 654f8e5..0000000 --- a/Makefile.d/arch_test.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This file is part of the flashrom project. - * - * Copyright (C) 2011 Carl-Daniel Hailfinger - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * This file determinate the target architecture. It should only be used - * by the Makefile - */ - -#if defined (__i386__) || defined (__x86_64__) || defined(__amd64__) - #define __FLASHROM_ARCH__ "x86" -#elif defined (__mips) || defined (__mips__) || defined (__MIPS__) || defined (mips) - #define __FLASHROM_ARCH__ "mips" -#elif defined(__powerpc) || defined(__powerpc__) || defined(__powerpc64__) || defined(__POWERPC__) || \ - defined(__ppc__) || defined(__ppc64__) || defined(_M_PPC) || defined(_ARCH_PPC) || \ - defined(_ARCH_PPC64) || defined(__ppc) - #define __FLASHROM_ARCH__ "ppc" -#elif defined(__arm__) || defined(__TARGET_ARCH_ARM) || defined(_ARM) || defined(_M_ARM) || defined(__arm) || \ - defined(__aarch64__) - #define __FLASHROM_ARCH__ "arm" -#elif defined (__sparc__) || defined (__sparc) - #define __FLASHROM_ARCH__ "sparc" -#elif defined (__alpha__) - #define __FLASHROM_ARCH__ "alpha" -#elif defined (__hppa__) || defined (__hppa) - #define __FLASHROM_ARCH__ "hppa" -#elif defined (__m68k__) - #define __FLASHROM_ARCH__ "m68k" -#elif defined (__riscv) - #define __FLASHROM_ARCH__ "riscv" -#elif defined (__sh__) - #define __FLASHROM_ARCH__ "sh" -#elif defined(__s390__) || defined(__s390x__) || defined(__zarch__) - #define __FLASHROM_ARCH__ "s390" -#elif defined(__arc__) - #define __FLASHROM_ARCH__ "arc" -#elif defined(__ARC64__) - #define __FLASHROM_ARCH__ "arc64" -#elif defined(__e2k__) - #define __FLASHROM_ARCH__ "e2k" -#else - #define __FLASHROM_ARCH__ "unknown" -#endif -__FLASHROM_ARCH__ diff --git a/Makefile.d/cc_test.c b/Makefile.d/cc_test.c deleted file mode 100644 index 0610964..0000000 --- a/Makefile.d/cc_test.c +++ /dev/null @@ -1,6 +0,0 @@ -int main(int argc, char **argv) -{ - (void)argc; - (void)argv; - return 0; -} diff --git a/Makefile.d/clock_gettime_test.c b/Makefile.d/clock_gettime_test.c deleted file mode 100644 index 000aa42..0000000 --- a/Makefile.d/clock_gettime_test.c +++ /dev/null @@ -1,9 +0,0 @@ -#include <time.h> -int main(int argc, char **argv) -{ - (void)argc; - (void)argv; - struct timespec res; - clock_gettime(CLOCK_REALTIME, &res); - return 0; -} diff --git a/Makefile.d/endian_test.h b/Makefile.d/endian_test.h deleted file mode 100644 index 36658b3..0000000 --- a/Makefile.d/endian_test.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * This file is part of the flashrom project. - * - * Copyright (C) 2011 Carl-Daniel Hailfinger - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * This file determinate the target endian. It should only be used my the Makefile - */ - -#if defined (__i386__) || defined (__x86_64__) || defined(__amd64__) -/* All x86 is little-endian. */ -#define __FLASHROM_LITTLE_ENDIAN__ 1 -#elif defined (__mips) || defined (__mips__) || defined (__MIPS__) || defined (mips) -/* MIPS can be either endian. */ -#if defined (__MIPSEL) || defined (__MIPSEL__) || defined (_MIPSEL) || defined (MIPSEL) -#define __FLASHROM_LITTLE_ENDIAN__ 1 -#elif defined (__MIPSEB) || defined (__MIPSEB__) || defined (_MIPSEB) || defined (MIPSEB) -#define __FLASHROM_BIG_ENDIAN__ 1 -#endif -#elif defined(__powerpc) || defined(__powerpc__) || defined(__powerpc64__) || defined(__POWERPC__) || \ - defined(__ppc__) || defined(__ppc64__) || defined(_M_PPC) || defined(_ARCH_PPC) || \ - defined(_ARCH_PPC64) || defined(__ppc) -/* PowerPC can be either endian. */ -#if defined (_BIG_ENDIAN) || defined (__BIG_ENDIAN__) -#define __FLASHROM_BIG_ENDIAN__ 1 -#elif defined (_LITTLE_ENDIAN) || defined (__LITTLE_ENDIAN__) -#define __FLASHROM_LITTLE_ENDIAN__ 1 -#endif -#elif defined(__arm__) || defined(__TARGET_ARCH_ARM) || defined(_ARM) || defined(_M_ARM) || defined(__arm) || \ - defined(__aarch64__) -/* ARM can be either endian. */ -#if defined (__ARMEB__) || defined (__BIG_ENDIAN__) -#define __FLASHROM_BIG_ENDIAN__ 1 -#elif defined (__ARMEL__) || defined (__LITTLE_ENDIAN__) -#define __FLASHROM_LITTLE_ENDIAN__ 1 -#endif -#elif defined (__sparc__) || defined (__sparc) -/* SPARC is big endian in general (but allows to access data in little endian too). */ -#define __FLASHROM_BIG_ENDIAN__ 1 -#elif defined(__arc__) -#if defined(__BIG_ENDIAN__) -#define __FLASHROM_BIG_ENDIAN__ 1 -#else -#define __FLASHROM_LITTLE_ENDIAN__ 1 -#endif -#endif - -#if !defined (__FLASHROM_BIG_ENDIAN__) && !defined (__FLASHROM_LITTLE_ENDIAN__) -/* If architecture-specific approaches fail try generic variants. First: BSD (works about everywhere). */ -#if !(defined(_WIN32) || defined(_WIN64) || defined(__WIN32__) || defined(__WINDOWS__)) -#include <sys/param.h> -#if defined (__BYTE_ORDER) -#if __BYTE_ORDER == __LITTLE_ENDIAN -#define __FLASHROM_LITTLE_ENDIAN__ -#elif __BYTE_ORDER == __BIG_ENDIAN -#define __FLASHROM_BIG_ENDIAN__ -#else -#error Unknown byte order! -#endif -#endif /* defined __BYTE_ORDER */ -#endif /* !IS_WINDOWS */ -#if !defined (__FLASHROM_BIG_ENDIAN__) && !defined (__FLASHROM_LITTLE_ENDIAN__) -/* Nonstandard libc-specific macros for determining endianness. */ -/* musl provides an endian.h as well... but it can not be detected from within C. */ -#if defined(__GLIBC__) -#include <endian.h> -#if BYTE_ORDER == LITTLE_ENDIAN -#define __FLASHROM_LITTLE_ENDIAN__ 1 -#elif BYTE_ORDER == BIG_ENDIAN -#define __FLASHROM_BIG_ENDIAN__ 1 -#endif -#endif -#endif -#endif -#if defined(__FLASHROM_LITTLE_ENDIAN__) -"little" -#else -"big" -#endif diff --git a/Makefile.d/ft232h_test.c b/Makefile.d/ft232h_test.c deleted file mode 100644 index 21bc995..0000000 --- a/Makefile.d/ft232h_test.c +++ /dev/null @@ -1,3 +0,0 @@ -#include <ftdi.h> - -enum ftdi_chip_type type = TYPE_232H; \ No newline at end of file diff --git a/Makefile.d/getopt_test.c b/Makefile.d/getopt_test.c deleted file mode 100644 index 9f72608..0000000 --- a/Makefile.d/getopt_test.c +++ /dev/null @@ -1,8 +0,0 @@ -#include <getopt.h> - -int main(int argc, char **argv) -{ - (void)argc; - (void)argv; - return 0; -} diff --git a/Makefile.d/linux_i2c_test.c b/Makefile.d/linux_i2c_test.c deleted file mode 100644 index 768226b..0000000 --- a/Makefile.d/linux_i2c_test.c +++ /dev/null @@ -1,9 +0,0 @@ -#include <linux/i2c-dev.h> -#include <linux/i2c.h> - -int main(int argc, char **argv) -{ - (void)argc; - (void)argv; - return 0; -} diff --git a/Makefile.d/linux_mtd_test.c b/Makefile.d/linux_mtd_test.c deleted file mode 100644 index d254e24..0000000 --- a/Makefile.d/linux_mtd_test.c +++ /dev/null @@ -1,8 +0,0 @@ -#include <mtd/mtd-user.h> - -int main(int argc, char **argv) -{ - (void)argc; - (void)argv; - return 0; -} diff --git a/Makefile.d/linux_spi_test.c b/Makefile.d/linux_spi_test.c deleted file mode 100644 index a4d2657..0000000 --- a/Makefile.d/linux_spi_test.c +++ /dev/null @@ -1,9 +0,0 @@ -#include <linux/types.h> -#include <linux/spi/spidev.h> - -int main(int argc, char **argv) -{ - (void)argc; - (void)argv; - return 0; -} diff --git a/Makefile.d/os_test.h b/Makefile.d/os_test.h deleted file mode 100644 index 17045b2..0000000 --- a/Makefile.d/os_test.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * This file is part of the flashrom project. - * - * Copyright (C) 2011 Carl-Daniel Hailfinger - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * This file determinate the target os. It should only be used my the Makefile - */ - -// Solaris -#if defined (__sun) && (defined(__i386) || defined(__amd64)) -#define __FLASHROM_OS__ "SunOS" -// OS X -#elif defined(__MACH__) && defined(__APPLE__) -#define __FLASHROM_OS__ "Darwin" -// FreeBSD -#elif defined(__FreeBSD__) -#define __FLASHROM_OS__ "FreeBSD" -// FreeBSD with glibc-based userspace (e.g. Debian/kFreeBSD) -#elif defined(__FreeBSD_kernel__) && defined(__GLIBC__) -#define __FLASHROM_OS__ "FreeBSD-glibc" -// DragonFlyBSD -#elif defined(__DragonFly__) -#define __FLASHROM_OS__ "DragonFlyBSD" -// NetBSD -#elif defined(__NetBSD__) -#define __FLASHROM_OS__ "NetBSD" -// OpenBSD -#elif defined(__OpenBSD__) -#define __FLASHROM_OS__ "OpenBSD" -// DJGPP -#elif defined(__DJGPP__) -#define __FLASHROM_OS__ "DOS" -// MinGW (always has _WIN32 available) -#elif defined(__MINGW32__) -#define __FLASHROM_OS__ "MinGW" -// Cygwin (usually without _WIN32) -#elif defined( __CYGWIN__) -#define __FLASHROM_OS__ "Cygwin" -// libpayload -#elif defined(__LIBPAYLOAD__) -#define __FLASHROM_OS__ "libpayload" -// GNU Hurd -#elif defined(__gnu_hurd__) -#define __FLASHROM_OS__ "Hurd" -// Linux -#elif defined(__linux__) - // There are various flags in use on Android apparently. __ANDROID__ seems to be the most trustworthy. - #if defined(__ANDROID__) - #define __FLASHROM_OS__ "Android" - #else - #define __FLASHROM_OS__ "Linux" - #endif -#else -#define __FLASHROM_OS__ "unknown" -#endif -__FLASHROM_OS__ diff --git a/Makefile.d/pciutils_test.c b/Makefile.d/pciutils_test.c deleted file mode 100644 index 3d67c29..0000000 --- a/Makefile.d/pciutils_test.c +++ /dev/null @@ -1,8 +0,0 @@ -#include <pciutils/pci.h> - -int main(int argc, char **argv) -{ - (void)argc; - (void)argv; - return 0; -} diff --git a/Makefile.d/utsname_test.c b/Makefile.d/utsname_test.c deleted file mode 100644 index 7bc6665..0000000 --- a/Makefile.d/utsname_test.c +++ /dev/null @@ -1,9 +0,0 @@ -#include <sys/utsname.h> -struct utsname osinfo; -int main(int argc, char **argv) -{ - (void)argc; - (void)argv; - uname(&osinfo); - return 0; -} diff --git a/Makefile.include b/Makefile.include deleted file mode 100644 index 5f81ccc..0000000 --- a/Makefile.include +++ /dev/null @@ -1,65 +0,0 @@ -# -# This file is part of the flashrom project. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# - -# Here are functions and macros defined for the Makefile - -define mark_unsupported -$(foreach p,$1, \ - $(if $(filter $($(p)),yes), \ - $(eval UNSUPPORTED_FEATURES += $(p)=yes), \ - $(eval override $(p) := no))) -endef - -define filter_deps -$(strip $(foreach p,$1, \ - $(if $(filter $($(p)),yes), \ - $(p)))) -endef - -define disable_all -$(foreach p,$1, \ - $(eval override $(p) := no)) -endef - -# Run the C Preprocessor with file $1 and return the last line, removing quotes. -define c_macro_test -$(strip $(call debug_shell, $(CC) -E $1 | tail -1 | tr -d '"')) -endef - -define c_compile_test # $1: files to compile, $2: cflags -$(call debug_shell, $(CC) -c -Wall -Werror $2 $1 -o /dev/null && echo yes || echo no) -endef - -define c_link_test # $1: file to compile and link, $2: cflags, $3: ldflags -$(call debug_shell, $(CC) -Wall -Werror $2 $1 $3 -o /dev/null && echo yes || echo no) -endef - -define find_dependency -$(call debug_shell, $(if $(PKG_CONFIG_LIBDIR),PKG_CONFIG_LIBDIR=$(PKG_CONFIG_LIBDIR),) $(PKG_CONFIG) --exists $1 && echo yes || echo no) -endef - -define dependency_version -$(call debug_shell, $(if $(PKG_CONFIG_LIBDIR),PKG_CONFIG_LIBDIR=$(PKG_CONFIG_LIBDIR),) $(PKG_CONFIG) --modversion $1 2>/dev/null) -endef - -define has_dependency # $1: dependency, $2: action/target -$(if $(findstring $(strip $1),yes), $(strip $2)) -endef - -define dependency_cflags -$(call debug_shell, $(if $(PKG_CONFIG_LIBDIR),PKG_CONFIG_LIBDIR=$(PKG_CONFIG_LIBDIR),) $(PKG_CONFIG) --cflags $1 2>/dev/null) -endef - -define dependency_ldflags -$(call debug_shell, $(if $(PKG_CONFIG_LIBDIR),PKG_CONFIG_LIBDIR=$(PKG_CONFIG_LIBDIR),) $(PKG_CONFIG) --libs --static $1 2>/dev/null) -endef diff --git a/README.rst b/README.rst index 371fd61..8347268 100644 --- a/README.rst +++ b/README.rst @@ -23,7 +23,7 @@ Building / installing / packaging --------------------------------- -flashrom supports building with **make** and **meson**. +flashrom is built with **meson**. TLDR, building with meson """"""""""""""""""""""""" @@ -38,17 +38,6 @@ For full detailed instructions, follow the information in :doc:`dev_guide/building_from_source` -TLDR, building with make -"""""""""""""""""""""""" - -:: - - make - make install - -For full detailed instructions, follow the information in -:doc:`dev_guide/building_with_make` - Contact ------- diff --git a/doc/dev_guide/building_with_make.rst b/doc/dev_guide/building_with_make.rst deleted file mode 100644 index 710aad3..0000000 --- a/doc/dev_guide/building_with_make.rst +++ /dev/null @@ -1,195 +0,0 @@ -Building with make -================== - -TLDR ----- - -:: - - make - make install - -Build instructions ------------------- - -**To build flashrom you need to install the following software:** - - * C compiler (GCC / clang) - * pkg-config - - * pciutils+libpci (if you want support for mainboard or PCI device flashing) - * libusb (if you want FT2232, Dediprog or USB-Blaster support) - * libftdi (if you want FT2232 or USB-Blaster support) - * libjaylink (if you want support for SEGGER J-Link and compatible devices) - * NI-845x driver & library package (if you want support for NI-845x devices; uses a proprietary driver) - -**Linux et al:** - - * pciutils / libpci - * pciutils-devel / pciutils-dev / libpci-dev - * zlib-devel / zlib1g-dev (needed if libpci was compiled with libz support) - -**On FreeBSD, you need the following ports:** - - * devel/gmake - * devel/libpci - -**On OpenBSD, you need the following ports:** - - * devel/gmake - * sysutils/pciutils - -**To compile on Linux, use**:: - - make - -**To compile on FreeBSD, OpenBSD or DragonFly BSD, use**:: - - gmake - -**To compile on Nexenta, use**:: - - make - -**To compile on Solaris, use**:: - - gmake LDFLAGS="-L$pathtolibpci" CC="gcc -I$pathtopciheaders" CFLAGS=-O2 - -**To compile on NetBSD (with pciutils, libftdi, libusb installed in /usr/pkg/), use**:: - - gmake - -**To compile and run on Darwin/Mac OS X:** - -Install DirectHW from coresystems GmbH. -DirectHW is available at https://www.coreboot.org/DirectHW . - -**To compile on Windows:** - -Install MSYS tools (and the NI-845x drivers if desired) as described in -:ref:`installing-dependencies`. - -To build with support for NI-845x:: - - make HAS_LIB_NI845X=yes CONFIG_NI845X_SPI=yes - -**To cross-compile on Linux for DOS:** - -Get packages of the DJGPP cross compiler and install them: - - * djgpp-filesystem djgpp-gcc djgpp-cpp djgpp-runtime djgpp-binutils - -As an alternative, the DJGPP web site offers packages for download as well: - - * djcross-binutils-2.29.1-1ap.x86_64.rpm - * djcross-gcc-7.2.0-1ap.x86_64.rpm - * djcrx-2.05-5.x86_64.rpm - -The cross toolchain packages for your distribution may have slightly different -names (look for packages named *djgpp*). - -Alternatively, you could use a script to build it from scratch: -https://github.com/andrewwutw/build-djgpp - -You will need the libpci and libgetopt library source trees and -their compiled static libraries and header files installed in some -directory say libpci-libgetopt/, which will be later specified with -LIBS_BASE parameter during flashrom compilation. Easiest way to -handle it is to put pciutils, libgetopt and flashrom directories -in one subdirectory. There will be an extra subdirectory libpci-libgetopt -created, which will contain compiled libpci and libgetopt. - -Download pciutils 3.5.6 and apply https://flashrom.org/File:Pciutils-3.5.6.patch.gz -Compile pciutils, using following command line:: - - make ZLIB=no DNS=no HOST=i386-djgpp-djgpp CROSS_COMPILE=i586-pc-msdosdjgpp- \ - PREFIX=/ DESTDIR=$PWD/../libpci-libgetopt \ - STRIP="--strip-program=i586-pc-msdosdjgpp-strip -s" install install-lib - -Download and compile with 'make' https://flashrom.org/File:Libgetopt.tar.gz - -Copy the libgetopt.a to ../libpci-libgetopt/lib and -getopt.h to ../libpci-libgetopt/include - -Enter the flashrom directory:: - - make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip LIBS_BASE=../libpci-libgetopt/ strip - -If you like, you can compress the resulting executable with UPX:: - - upx -9 flashrom.exe - -To run flashrom.exe, download https://flashrom.org/File:Csdpmi7b.zip and -unpack CWSDPMI.EXE into the current directory or one in PATH. - -**To cross-compile on Linux for Windows:** - -Get packages of the MinGW cross compiler and install them:: - - mingw32-filesystem mingw32-cross-cpp mingw32-cross-binutils mingw32-cross-gcc - mingw32-runtime mingw32-headers - -The cross toolchain packages for your distribution may have slightly different -names (look for packages named *mingw*). -PCI-based programmers (internal etc.) are not supported on Windows. -Run (change CC= and STRIP= settings where appropriate):: - - make CC=i686-w64-mingw32-gcc STRIP=i686-w64-mingw32-strip - -**Processor architecture dependent features:** - -On non-x86 architectures a few programmers don't work (yet) because they -use port-based I/O which is not directly available on non-x86. Those -programmers will be disabled automatically if you run "make". - -**Compiler quirks:** - -If you are using clang and if you want to enable only one driver, you may hit an -overzealous compiler warning from clang. Compile with "make WARNERROR=no" to -force it to continue and enjoy. - -**Bindings:** - -Foreign function interface bindings for the rust language are included in the -bindings folder. These are not compiled as part of the normal build process. -See the readme under bindings/rust for more information. - - -Installation ------------- - -In order to install flashrom and the manpage into /usr/local, type:: - - make install - -For installation in a different directory use DESTDIR, e.g. like this:: - - make DESTDIR=/usr install - -If you have insufficient permissions for the destination directory, use sudo -by adding sudo in front of the commands above. - - -Packaging ---------- - -To package flashrom and remove dependencies on Git, either use:: - - make export - -or:: - - make tarball - -``make export`` will export all flashrom files from the Git repository at -revision HEAD into a directory named ``$EXPORTDIR/flashrom-$RELEASENAME`` -and will additionally add a ``versioninfo.inc`` file in that directory to -contain the Git revision of the exported tree and a date for the manual -page. - -``make tarball`` will simply tar up the result of make export and compress -it with bzip2. - -The snapshot tarballs are the result of ``make tarball`` and require no -further processing. Some git files (for example the rust bindings) are omitted -from the tarball, as controlled by the .gitattributes files. diff --git a/doc/release_notes/index.rst b/doc/release_notes/index.rst index 1d2e0d9..f4b6eb2 100644 --- a/doc/release_notes/index.rst +++ b/doc/release_notes/index.rst @@ -4,5 +4,6 @@ .. toctree:: :maxdepth: 1 + v_1_5-devel v_1_4 v_1_3 diff --git a/doc/release_notes/v_1_5-devel.rst b/doc/release_notes/v_1_5-devel.rst new file mode 100644 index 0000000..34b379e --- /dev/null +++ b/doc/release_notes/v_1_5-devel.rst @@ -0,0 +1,13 @@ +======================= +v1.5-devel (unreleased) +======================= + +This document describes the major changes to flashrom since the release +of version 1.4. These changes will be included in the future v1.5 release. + +Build only supported with Meson +------------------------------- + +As documented in the v1.4 release notes, support for building flashrom with +make has been removed; all Makefiles have been deleted. Meson is now the only +supported tool for building flashrom from source. \ No newline at end of file diff --git a/test_build.sh b/test_build.sh index ee86496..8c041f0 100755 --- a/test_build.sh +++ b/test_build.sh @@ -5,13 +5,6 @@ is_scan_build_env=0 -make_programmer_opts="INTERNAL INTERNAL_X86 SERPROG RAYER_SPI RAIDEN_DEBUG_SPI PONY_SPI NIC3COM \ - GFXNVIDIA SATASII ATAHPT ATAVIA ATAPROMISE FT2232_SPI USBBLASTER_SPI MSTARDDC_SPI \ - PICKIT2_SPI STLINKV3_SPI PARADE_LSPCON MEDIATEK_I2C_SPI REALTEK_MST_I2C_SPI DUMMY \ - DRKAISER NICREALTEK NICNATSEMI NICINTEL NICINTEL_SPI NICINTEL_EEPROM OGP_SPI \ - BUSPIRATE_SPI DEDIPROG DEVELOPERBOX_SPI SATAMV LINUX_MTD LINUX_SPI IT8212 \ - CH341A_SPI CH347_SPI DIGILENT_SPI DIRTYJTAG_SPI JLINK_SPI ASM106X" - meson_programmer_opts="all auto group_ftdi group_i2c group_jlink group_pci group_serial group_usb \ atahpt atapromise atavia buspirate_spi ch341a_spi ch347_spi dediprog \ developerbox_spi digilent_spi dirtyjtag_spi drkaiser dummy ft2232_spi \ @@ -31,24 +24,6 @@ } -build_make () { - make clean - make -j $(nproc) CONFIG_EVERYTHING=yes - - # In case of clang analyzer we don't want to run it on - # each programmer individually. Thus, just return here. - if [ ${is_scan_build_env} -eq 1 ]; then - return - fi - - for option in ${make_programmer_opts}; do - echo "Building ${option}" - make clean - make -j $(nproc) CONFIG_NOTHING=yes CONFIG_${option}=yes - done -} - - build_meson () { build_dir=out meson_opts="-Dtests=enabled -Dman-pages=enabled -Ddocumentation=enabled" @@ -74,5 +49,4 @@ run_linter -build_make build_meson diff --git a/util/ich_descriptors_tool/Makefile b/util/ich_descriptors_tool/Makefile deleted file mode 100644 index aa1b696..0000000 --- a/util/ich_descriptors_tool/Makefile +++ /dev/null @@ -1,83 +0,0 @@ -# -# This file is part of the flashrom project. -# -# This Makefile works standalone, but it is usually called from the main -# Makefile in the flashrom directory. - -include ../../Makefile.include - -PROGRAM=ich_descriptors_tool -EXTRAINCDIRS = ../../ . -DEPPATH = .dep -OBJATH = .obj -SHAREDSRC = ich_descriptors.c -SHAREDSRCDIR = ../.. -# If your compiler spits out excessive warnings, run make WARNERROR=no -# You shouldn't have to change this flag. -WARNERROR ?= yes - -SRC = $(wildcard *.c) - -# If the user has specified custom CFLAGS, all CFLAGS settings below will be -# completely ignored by gnumake. -CFLAGS ?= -Os -Wall -Wshadow -override CFLAGS += -I$(SHAREDSRCDIR)/include - -# Auto determine HOST_OS and TARGET_OS if they are not set as argument -HOST_OS ?= $(shell uname) -TARGET_OS := $(call c_macro_test, ../../Makefile.d/os_test.h) - -ifeq ($(findstring MINGW, $(HOST_OS)), MINGW) -# Explicitly set CC = gcc on MinGW, otherwise: "cc: command not found". -CC = gcc -endif - -ifeq ($(TARGET_OS), DOS) -EXEC_SUFFIX := .exe -# DJGPP has odd uint*_t definitions which cause lots of format string warnings. -CFLAGS += -Wno-format -endif - -ifeq ($(TARGET_OS), MinGW) -EXEC_SUFFIX := .exe -# Some functions provided by Microsoft do not work as described in C99 specifications. This macro fixes that -# for MinGW. See http://sourceforge.net/p/mingw-w64/wiki2/printf%20and%20scanf%20family/ -CFLAGS += -D__USE_MINGW_ANSI_STDIO=1 -endif - -ifeq ($(WARNERROR), yes) -CFLAGS += -Werror -endif - - -FLASHROM_CFLAGS += -MMD -MP -MF $(DEPPATH)/$((a)F).d -# enables functions that populate the descriptor structs from plain binary dumps -FLASHROM_CFLAGS += -D ICH_DESCRIPTORS_FROM_DUMP_ONLY -FLASHROM_CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) - -OBJ = $(OBJATH)/$(SRC:%.c=%.o) - -SHAREDOBJ = $(OBJATH)/$(notdir $(SHAREDSRC:%.c=%.o)) - -all:$(PROGRAM)$(EXEC_SUFFIX) - -$(OBJ): $(OBJATH)/%.o : %.c - $(CC) $(CFLAGS) $(CPPFLAGS) $(FLASHROM_CFLAGS) -o $@ -c $< - -# this enables us to share source files without simultaneously sharing .o files -# with flashrom, which would lead to unexpected results (w/o running make clean) -$(SHAREDOBJ): $(OBJATH)/%.o : $(SHAREDSRCDIR)/%.c - $(CC) $(CFLAGS) $(CPPFLAGS) $(FLASHROM_CFLAGS) -o $@ -c $< - -$(PROGRAM)$(EXEC_SUFFIX): $(OBJ) $(SHAREDOBJ) - $(CC) $(LDFLAGS) -o $(PROGRAM)$(EXEC_SUFFIX) $(OBJ) $(SHAREDOBJ) - -# We don't use EXEC_SUFFIX here because we want to clean everything. -clean: - rm -f $(PROGRAM) $(PROGRAM).exe - rm -rf $(DEPPATH) $(OBJATH) - -# Include the dependency files. --include $(shell mkdir -p $(DEPPATH) $(OBJATH) 2>/dev/null) $(wildcard $(DEPPATH)/*) - -.PHONY: all clean -- To view, visit https://review.coreboot.org/c/flashrom/+/83673?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newchange Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: Ib3cf22cf636ef9b70527b734ffa34aead2a74edd Gerrit-Change-Number: 83673 Gerrit-PatchSet: 1 Gerrit-Owner: Peter Marheine <pmarheine(a)chromium.org>

1 0

[XS] Change in flashrom[main]: manibuilder: Make curl follow redirects
by Patrick Georgi (Code Review) 28 Jul '24

28 Jul '24

Patrick Georgi has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/83672?usp=email ) Change subject: manibuilder: Make curl follow redirects ...................................................................... manibuilder: Make curl follow redirects The wiki is moving around, and the URLs are probably not final. Until the download locations can be nailed down to their final location, tell curl to follow HTTP redirects. Change-Id: I52f1c786a376f5c7394fa5bffc689e58f8691c75 Signed-off-by: Patrick Georgi <patrick(a)coreboot.org> --- M util/manibuilder/Dockerfile.djgpp 1 file changed, 2 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/72/83672/1 diff --git a/util/manibuilder/Dockerfile.djgpp b/util/manibuilder/Dockerfile.djgpp index 7bd5c7b..b2fa3fa 100644 --- a/util/manibuilder/Dockerfile.djgpp +++ b/util/manibuilder/Dockerfile.djgpp @@ -14,14 +14,14 @@ git clone https://git.kernel.org/pub/scm/utils/pciutils/pciutils.git && \ cd pciutils && \ git checkout v3.5.6 && \ - curl --insecure https://flashrom.org/images/6/6a/Pciutils-3.5.6.patch.gz | zcat | git apply && \ + curl -L --insecure https://flashrom.org/images/6/6a/Pciutils-3.5.6.patch.gz | zcat | git apply && \ make ZLIB=no DNS=no HOST=i386-djgpp-djgpp \ CROSS_COMPILE=i586-pc-msdosdjgpp- \ PREFIX=/ DESTDIR=$PWD/../ \ STRIP="--strip-program=i586-pc-msdosdjgpp-strip -s" \ install install-lib && \ cd ../ && \ - curl --insecure https://flashrom.org/images/3/3d/Libgetopt.tar.gz | zcat | tar x && \ + curl -L --insecure https://flashrom.org/images/3/3d/Libgetopt.tar.gz | zcat | tar x && \ cd libgetopt && \ make && cp libgetopt.a ../lib/ && cp getopt.h ../include/ -- To view, visit https://review.coreboot.org/c/flashrom/+/83672?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newchange Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: I52f1c786a376f5c7394fa5bffc689e58f8691c75 Gerrit-Change-Number: 83672 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Georgi

1 0

[M] Change in flashrom[main]: doc: Add doc for buspirate programmer
by Anastasia Klimchuk (Code Review) 27 Jul '24

27 Jul '24

Attention is currently required from: Dreg. Anastasia Klimchuk has posted comments on this change by Anastasia Klimchuk. ( https://review.coreboot.org/c/flashrom/+/83471?usp=email ) Change subject: doc: Add doc for buspirate programmer ...................................................................... Patch Set 2: (1 comment) Patchset: PS2: David, I wanted to ask you, maybe you can review this document? I remember you are using buspirate, you know how this programmer works. The document is quite old (last modified in 2013), it would be really great to have someone with knowledge to review it in the year 2024. Please add comments for anything that you see: if you see something wrong, or obsolete, or maybe something needs to be added to the doc. If you think the doc is fine and you approve, reply +1 to the patch. This is a part of the effort to migrate documentation from the old wiki website into the git tree. All in-tree docs are auto-published on the website. If you could review, that would help a lot! Thank you so much! -- To view, visit https://review.coreboot.org/c/flashrom/+/83471?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: I5a57f08ea3fce0c78d73aa61b85ff7b0cff450b8 Gerrit-Change-Number: 83471 Gerrit-PatchSet: 2 Gerrit-Owner: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Dreg <dreg(a)rootkit.es> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Dreg <dreg(a)rootkit.es> Gerrit-Comment-Date: Sat, 27 Jul 2024 10:55:14 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No

1 0

2024

2023

2022

2021

2020

2019

2018

2017

flashrom-gerrit July 2024