October 2022 - flashrom-gerrit

Change in flashrom[master]: dediprog: Fix SF600 4BA mode
by Patrick Rudolph (Code Review) Nov. 25, 2023

Nov. 25, 2023

Hello Patrick Rudolph, I'd like you to do a code review. Please visit https://review.coreboot.org/c/flashrom/+/34629 to review the following change. Change subject: dediprog: Fix SF600 4BA mode ...................................................................... dediprog: Fix SF600 4BA mode Flash chips greater than 16MiB require 4BA mode support. Current master doesn't support such mode as the SF600 uses PROTOCOL_V3. Fix protocol version check to support 4BA on PROTOCOL_V3, too. Tested on SF600 V:7.2.45 Able to read and write "IS25WP256" (32768 kB, SPI). Change-Id: I2d3089693fbd2f8f7717a8f71be242be131ce707 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M dediprog.c 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/29/34629/1 diff --git a/dediprog.c b/dediprog.c index 3566109..add478d 100644 --- a/dediprog.c +++ b/dediprog.c @@ -1160,7 +1160,7 @@ if (dediprog_devicetype == DEV_SF100 && protocol() == PROTOCOL_V1) spi_master_dediprog.features &= ~SPI_MASTER_NO_4BA_MODES; - if (protocol() == PROTOCOL_V2) + if (protocol() >= PROTOCOL_V2) spi_master_dediprog.features |= SPI_MASTER_4BA; if (register_spi_master(&spi_master_dediprog) || dediprog_set_leds(LED_NONE)) -- To view, visit https://review.coreboot.org/c/flashrom/+/34629 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I2d3089693fbd2f8f7717a8f71be242be131ce707 Gerrit-Change-Number: 34629 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

4 7

Change in flashrom[master]: flashchips: Add ISSI IS25LQ016
by Angel Pons (Code Review) Aug. 14, 2023

Aug. 14, 2023

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/40431 ) Change subject: flashchips: Add ISSI IS25LQ016 ...................................................................... flashchips: Add ISSI IS25LQ016 Datasheet: http://www.issi.com/WW/pdf/25LQ016.pdf Tested all four PREW functions with a FT2232H. Change-Id: I02f19767b8a60fb2d37adab34894b6edb6ac4494 Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M flashchips.c M flashchips.h 2 files changed, 39 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/31/40431/1 diff --git a/flashchips.c b/flashchips.c index b4006df..a25f915 100644 --- a/flashchips.c +++ b/flashchips.c @@ -7049,6 +7049,44 @@ { .vendor = "ISSI", + .name = "IS25LQ016", + .bustype = BUS_SPI, + .manufacture_id = ISSI_ID_SPI, + .model_id = ISSI_IS25LQ016, + .total_size = 2048, + .page_size = 256, + /* OTP: 1024B total; read 0x4b; write 0xb1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2300, 3600}, + }, + + { + .vendor = "ISSI", .name = "IS25WP032", .bustype = BUS_SPI, .manufacture_id = ISSI_ID_SPI, diff --git a/flashchips.h b/flashchips.h index e5ef390..b5c0aeb 100644 --- a/flashchips.h +++ b/flashchips.h @@ -459,6 +459,7 @@ #define ISSI_IS25LP064 0x6017 #define ISSI_IS25LP128 0x6018 #define ISSI_IS25LP256 0x6019 +#define ISSI_IS25LQ016 0x1445 #define ISSI_IS25WP032 0x7016 #define ISSI_IS25WP064 0x7017 #define ISSI_IS25WP128 0x7018 -- To view, visit https://review.coreboot.org/c/flashrom/+/40431 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I02f19767b8a60fb2d37adab34894b6edb6ac4494 Gerrit-Change-Number: 40431 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

6 8

Change in flashrom[master]: flashchips: Added missing voltages
by Name of user not set (Code Review) June 2, 2023

June 2, 2023

roman.stingler(a)gmail.com has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/40432 ) Change subject: flashchips: Added missing voltages ...................................................................... flashchips: Added missing voltages Signed-off-by: Roman Stingler <roman.stingler(a)gmail.com> Change-Id: I0825ab11e53c0b018b49173907e2b274a4cf1fab --- M flashchips.c 1 file changed, 9 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/32/40432/1 diff --git a/flashchips.c b/flashchips.c index b4006df..f2d9fc1 100644 --- a/flashchips.c +++ b/flashchips.c @@ -7650,6 +7650,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -7677,6 +7678,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -7704,6 +7706,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -7727,6 +7730,7 @@ .unlock = unlock_28f004s5, .write = write_82802ab, .read = read_memmapped, + .voltage = {2700, 3600}, }, { @@ -7755,6 +7759,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -7783,6 +7788,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -9972,6 +9978,7 @@ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, + .voltage = {2700, 3600}, }, { @@ -17550,6 +17557,7 @@ }, .write = write_jedec, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -17573,6 +17581,7 @@ }, .write = write_jedec, .read = read_memmapped, + .voltage = {4500, 5500}, }, { -- To view, visit https://review.coreboot.org/c/flashrom/+/40432 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I0825ab11e53c0b018b49173907e2b274a4cf1fab Gerrit-Change-Number: 40432 Gerrit-PatchSet: 1 Gerrit-Owner: roman.stingler(a)gmail.com Gerrit-MessageType: newchange

4 6

Change in flashrom[master]: flaschips.c: Fix building with CONFIG_DUMMY=no
by Arthur Heymans (Code Review) April 21, 2023

April 21, 2023

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/47166 ) Change subject: flaschips.c: Fix building with CONFIG_DUMMY=no ...................................................................... flaschips.c: Fix building with CONFIG_DUMMY=no With CONFIG_DUMMY=yes dummuflasher.c is not linked in so there is definition of probe_variable_size. Change-Id: Ib9bae93fadc55cf133e837e63419da104a6298be Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M flashchips.c 1 file changed, 4 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/66/47166/1 diff --git a/flashchips.c b/flashchips.c index 48efb85..1681f42 100644 --- a/flashchips.c +++ b/flashchips.c @@ -19081,3 +19081,7 @@ }; const unsigned int flashchips_size = ARRAY_SIZE(flashchips); + +#if !CONFIG_DUMMY +int probe_variable_size(struct flashctx *flash) { return 0; }; +#endif -- To view, visit https://review.coreboot.org/c/flashrom/+/47166 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ib9bae93fadc55cf133e837e63419da104a6298be Gerrit-Change-Number: 47166 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

5 12

Change in flashrom[master]: buspirate: Add option for setting the aux pin
by Sean Anderson (Code Review) April 13, 2023

April 13, 2023

Sean Anderson has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/43608 ) Change subject: buspirate: Add option for setting the aux pin ...................................................................... buspirate: Add option for setting the aux pin This adds a parameter to drive the aux pin low (or high if you explicitly want the previous behavior). Some boards need to have a reset pin driven low before the firmware can be safely flashed. With the Bus Pirate, this is most easily done with the auxiliary pin. Change-Id: Ieeecfdf1afc06dadda9b8f99547cd74854ca6775 Signed-off-by: Sean Anderson <seanga2(a)gmail.com> --- M buspirate_spi.c M flashrom.8.tmpl 2 files changed, 33 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/08/43608/1 diff --git a/buspirate_spi.c b/buspirate_spi.c index fdfc0e4..1ccb107 100644 --- a/buspirate_spi.c +++ b/buspirate_spi.c @@ -228,6 +228,7 @@ int serialspeed_index = -1; int ret = 0; int pullup = 0; + int aux = 1; dev = extract_programmer_param("dev"); if (dev && !strlen(dev)) { @@ -277,6 +278,17 @@ } free(tmp); + tmp = extract_programmer_param("aux"); + if (tmp) { + if (strcasecmp("high", tmp) == 0) + ; /* Default */ + else if (strcasecmp("low", tmp) == 0) + aux = 0; + else + msg_perr("Invalid AUX state, driving high by default.\n"); + } + free(tmp); + /* Default buffer size is 19: 16 bytes data, 3 bytes control. */ #define DEFAULT_BUFSIZE (16 + 3) bp_commbuf = malloc(DEFAULT_BUFSIZE); @@ -520,11 +532,18 @@ } /* Initial setup (SPI peripherals config): Enable power, CS high, AUX */ - bp_commbuf[0] = 0x40 | 0x0b; + bp_commbuf[0] = 0x40 | 0x09; if (pullup == 1) { bp_commbuf[0] |= (1 << 2); msg_pdbg("Enabling pull-up resistors.\n"); } + if (aux) { + bp_commbuf[0] |= (1 << 1); + msg_pdbg("Driving AUX high.\n"); + } else { + msg_pdbg("Driving AUX low.\n"); + } + ret = buspirate_sendrecv(bp_commbuf, 1, 1); if (ret) return 1; diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index db50d59..caf860c 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -902,6 +902,19 @@ .URLB "http://dangerousprototypes.com/docs/Practical_guide_to_Bus_Pirate_pull-up_r…" \ "in a guide by dangerousprototypes" . Only the external supply voltage (Vpu) is supported as of this writing. +.sp +An optional aux parameter specifies the state of the Bus Pirate auxiliary pin. +This may be used to drive the auxiliary pin high or low before a transfer. +Syntax is +.sp +.B " flashrom -p buspirate_spi:aux=state" +.sp +where +.B state +can be +.BR high " or " low . +The default +.BR state " is " high . .SS .BR "pickit2_spi " programmer .IP -- To view, visit https://review.coreboot.org/c/flashrom/+/43608 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ieeecfdf1afc06dadda9b8f99547cd74854ca6775 Gerrit-Change-Number: 43608 Gerrit-PatchSet: 1 Gerrit-Owner: Sean Anderson <seanga2(a)gmail.com> Gerrit-MessageType: newchange

6 14

Change in ...flashrom[master]: cli_classic: Report the gathered layout entries at level dbg
by Nico Huber (Code Review) Nov. 4, 2022

Nov. 4, 2022

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/31012 Change subject: cli_classic: Report the gathered layout entries at level dbg ...................................................................... cli_classic: Report the gathered layout entries at level dbg Change-Id: I7678ba5138f0d722ee44747fe123f192abdd0ffd Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M cli_classic.c M layout.c M layout.h 3 files changed, 18 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/12/31012/1 diff --git a/cli_classic.c b/cli_classic.c index ced08c6..536ef24 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -645,6 +645,8 @@ goto out_shutdown; } + report_layout(layout); + flashrom_layout_set(fill_flash, layout); flashrom_flag_set(fill_flash, FLASHROM_FLAG_FORCE, !!force); #if CONFIG_INTERNAL == 1 diff --git a/layout.c b/layout.c index fa66238..c589d17 100644 --- a/layout.c +++ b/layout.c @@ -229,3 +229,17 @@ return ret; } + +void report_layout(const struct flashrom_layout *const l) +{ + unsigned int i; + + if (!l) + return; + + msg_gdbg("Gathered %zu layout entries:\n", l->num_entries); + for (i = 0; i < l->num_entries; ++i) { + msg_gdbg("%08"PRIx32":%08"PRIx32" %s\n", + l->entries[i].start, l->entries[i].end, l->entries[i].name); + } +} diff --git a/layout.h b/layout.h index eb54a4f..61311bc 100644 --- a/layout.h +++ b/layout.h @@ -59,4 +59,6 @@ int process_include_args(struct flashrom_layout *); +void report_layout(const struct flashrom_layout *); + #endif /* !__LAYOUT_H__ */ -- To view, visit https://review.coreboot.org/c/flashrom/+/31012 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I7678ba5138f0d722ee44747fe123f192abdd0ffd Gerrit-Change-Number: 31012 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

5 19

[S] Change in flashrom[master]: writeprotect: Add some debug logging if wp_verify fails
by Edward O'Callaghan (Code Review) Oct. 31, 2022

Oct. 31, 2022

Attention is currently required from: Evan Benn. Edward O'Callaghan has posted comments on this change. ( https://review.coreboot.org/c/flashrom/+/67720 ) Change subject: writeprotect: Add some debug logging if wp_verify fails ...................................................................... Patch Set 4: (1 comment) File writeprotect.c: https://review.coreboot.org/c/flashrom/+/67720/comment/5a04019f_4a5b9204 PS1, Line 166: return FLASHROM_WP_ERR_READ_FAILED; > The error code change seems fine. Please include in the commit message in future. -- To view, visit https://review.coreboot.org/c/flashrom/+/67720 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I5fcaf767570418f90ae44826a1135d9b49653033 Gerrit-Change-Number: 67720 Gerrit-PatchSet: 4 Gerrit-Owner: Evan Benn <evanbenn(a)google.com> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-Reviewer: Nikolai Artemiev <nartemiev(a)google.com> Gerrit-Reviewer: Sergii Dmytruk <sergii.dmytruk(a)3mdeb.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Evan Benn <evanbenn(a)google.com> Gerrit-Comment-Date: Mon, 31 Oct 2022 23:43:34 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Nikolai Artemiev <nartemiev(a)google.com> Comment-In-Reply-To: Evan Benn <evanbenn(a)google.com> Gerrit-MessageType: comment

1 0

[S] Change in flashrom[master]: writeprotect: Add some debug logging if wp_verify fails
by Edward O'Callaghan (Code Review) Oct. 31, 2022

Oct. 31, 2022

Attention is currently required from: Evan Benn. Edward O'Callaghan has posted comments on this change. ( https://review.coreboot.org/c/flashrom/+/67720 ) Change subject: writeprotect: Add some debug logging if wp_verify fails ...................................................................... Patch Set 4: (1 comment) File writeprotect.c: https://review.coreboot.org/c/flashrom/+/67720/comment/8b547e31_e8fecb68 PS4, Line 175: ret = FLASHROM_WP_ERR_VERIFY_FAILED; Hold'up, doesn't this change also behavior as well as add debug messages? Because previously you would get a early return however now the loop will continue until the terminal register count before returning the verify_failed err code. Because the commit message is insufficient I actually didn't see that nuance before, is that a problem now? The commit message should have more details in future Evan and not cram in these subtle changes in the same commit. -- To view, visit https://review.coreboot.org/c/flashrom/+/67720 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I5fcaf767570418f90ae44826a1135d9b49653033 Gerrit-Change-Number: 67720 Gerrit-PatchSet: 4 Gerrit-Owner: Evan Benn <evanbenn(a)google.com> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-Reviewer: Nikolai Artemiev <nartemiev(a)google.com> Gerrit-Reviewer: Sergii Dmytruk <sergii.dmytruk(a)3mdeb.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Evan Benn <evanbenn(a)google.com> Gerrit-Comment-Date: Mon, 31 Oct 2022 23:40:26 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Gerrit-MessageType: comment

1 0

[M] Change in flashrom[master]: flashrom.c: Make 'chip_to_probe' a param to probe_flash()
by Edward O'Callaghan (Code Review) Oct. 31, 2022

Oct. 31, 2022

Attention is currently required from: Felix Singer, Anastasia Klimchuk. Edward O'Callaghan has posted comments on this change. ( https://review.coreboot.org/c/flashrom/+/67091 ) Change subject: flashrom.c: Make 'chip_to_probe' a param to probe_flash() ...................................................................... Patch Set 12: (3 comments) Commit Message: https://review.coreboot.org/c/flashrom/+/67091/comment/e7e1c33c_0aa7871d PS4, Line 12: funtion > typo, funtion -> function Done https://review.coreboot.org/c/flashrom/+/67091/comment/fc213ae9_6353f8f8 PS4, Line 14: > You have probably tested this by probing something (anything at all)? Could you please add testing i […] Done File flashrom.c: https://review.coreboot.org/c/flashrom/+/67091/comment/799839c3_58554e49 PS4, Line 837: return 0; > Should this be `goto notfound` ? […] Done -- To view, visit https://review.coreboot.org/c/flashrom/+/67091 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ifcdace07ea2135d83dea92cfa5c6bec8d7ddf05d Gerrit-Change-Number: 67091 Gerrit-PatchSet: 12 Gerrit-Owner: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Felix Singer <felixsinger(a)posteo.net> Gerrit-Reviewer: Nikolai Artemiev <nartemiev(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Felix Singer <felixsinger(a)posteo.net> Gerrit-Attention: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Comment-Date: Mon, 31 Oct 2022 23:17:19 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-MessageType: comment

1 0

[M] Change in flashrom[master]: flashrom.c: Make 'chip_to_probe' a param to probe_flash()
by Edward O'Callaghan (Code Review) Oct. 31, 2022

Oct. 31, 2022

Attention is currently required from: Felix Singer, Edward O'Callaghan. Hello Felix Singer, build bot (Jenkins), Nikolai Artemiev, Anastasia Klimchuk, I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/flashrom/+/67091 to look at the new patch set (#13). Change subject: flashrom.c: Make 'chip_to_probe' a param to probe_flash() ...................................................................... flashrom.c: Make 'chip_to_probe' a param to probe_flash() Apart from the very bespoke case of 'probe_w29ee011()' the override 'chip_to_probe' name is a nature parameter to 'probe_flash()'. However we can deal with w29ee011 by providing a probe specific validation function to check if the chip can indeed be overriden. TEST=`./flashrom -p internal --flash-name`. Change-Id: Ifcdace07ea2135d83dea92cfa5c6bec8d7ddf05d Signed-off-by: Edward O'Callaghan <quasisec(a)google.com> --- M cli_classic.c M flashrom.c M include/chipdrivers.h M include/flash.h M libflashrom.c M w29ee011.c 6 files changed, 44 insertions(+), 18 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/91/67091/13 -- To view, visit https://review.coreboot.org/c/flashrom/+/67091 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ifcdace07ea2135d83dea92cfa5c6bec8d7ddf05d Gerrit-Change-Number: 67091 Gerrit-PatchSet: 13 Gerrit-Owner: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Felix Singer <felixsinger(a)posteo.net> Gerrit-Reviewer: Nikolai Artemiev <nartemiev(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Felix Singer <felixsinger(a)posteo.net> Gerrit-Attention: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-MessageType: newpatchset

1 0