October 2021 - flashrom-gerrit

Change in flashrom[master]: jlink_spi: Add option to enable target power
by zapb (Code Review) 30 Apr '22

30 Apr '22

zapb has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/48380 ) Change subject: jlink_spi: Add option to enable target power ...................................................................... jlink_spi: Add option to enable target power Change-Id: I026c22ae1c22541d0024f164c827909ca4a34cf4 Signed-off-by: Marc Schink <dev(a)zapb.de> --- M flashrom.8.tmpl M jlink_spi.c 2 files changed, 47 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/80/48380/1 diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index db50d59..2299dad 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -1279,6 +1279,9 @@ .sp syntax where \fBfrequency\fP is the SPI clock frequency in kHz. The maximum speed depends on the device in use. +.sp +The \fBpower=on\fP option can be used to activate the 5 V power supply (PWR_5V) +of the J-Link during a flash operation. .SS .BR "stlinkv3_spi " programmer .IP diff --git a/jlink_spi.c b/jlink_spi.c index 3a73c01..8344af2 100644 --- a/jlink_spi.c +++ b/jlink_spi.c @@ -54,6 +54,7 @@ static struct jaylink_context *jaylink_ctx; static struct jaylink_device_handle *jaylink_devh; static bool reset_cs; +static bool enable_target_power; static bool assert_cs(void) { @@ -166,6 +167,15 @@ static int jlink_spi_shutdown(void *data) { + if (enable_target_power) { + int ret = jaylink_set_target_power(jaylink_devh, false); + + if (ret != JAYLINK_OK) { + msg_perr("jaylink_set_target_power() failed: %s.\n", + jaylink_strerror(ret)); + } + } + if (jaylink_devh) jaylink_close(jaylink_devh); @@ -258,6 +268,21 @@ else msg_pdbg("Using TRST as chip select signal.\n"); + enable_target_power = false; + arg = extract_programmer_param("power"); + + if (arg) { + if (!strcasecmp(arg, "on")) { + enable_target_power = true; + } else { + msg_perr("Invalid value for 'power' argument: '%s'.\n", arg); + free(arg); + return 1; + } + } + + free(arg); + ret = jaylink_init(&jaylink_ctx); if (ret != JAYLINK_OK) { @@ -368,6 +393,13 @@ } } + if (enable_target_power) { + if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_SET_TARGET_POWER)) { + msg_perr("Device does not support target power.\n"); + return 1; + } + } + uint32_t ifaces; ret = jaylink_get_available_interfaces(jaylink_devh, &ifaces); @@ -389,6 +421,18 @@ return 1; } + if (enable_target_power) { + ret = jaylink_set_target_power(jaylink_devh, true); + + if (ret != JAYLINK_OK) { + msg_perr("jaylink_set_target_power() failed: %s.\n", jaylink_strerror(ret)); + return 1; + } + + /* Wait some time until the target is powered up. */ + internal_sleep(10000UL); + } + struct jaylink_hardware_status hwstat; ret = jaylink_get_hardware_status(jaylink_devh, &hwstat); -- To view, visit https://review.coreboot.org/c/flashrom/+/48380 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I026c22ae1c22541d0024f164c827909ca4a34cf4 Gerrit-Change-Number: 48380 Gerrit-PatchSet: 1 Gerrit-Owner: zapb <dev(a)zapb.de> Gerrit-MessageType: newchange

3 7

Change in flashrom[master]: chipset_enable.c: Add Icelake U to known systems
by Mimoja (Code Review) 13 Apr '22

13 Apr '22

Mimoja has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/37987 ) Change subject: chipset_enable.c: Add Icelake U to known systems ...................................................................... chipset_enable.c: Add Icelake U to known systems Intel Icelake Systems use an (so far) underdescribed 495 Series Chipset that behaves compaitble to pch300 chips. Change-Id: I6227d32f4476420cf1aeec37ebd4b7648e0b3d15 Signed-off-by: Johanna Schander <git(a)mimoja.de> --- M chipset_enable.c 1 file changed, 1 insertion(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/87/37987/1 diff --git a/chipset_enable.c b/chipset_enable.c index e826d90..988720b 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -2046,6 +2046,7 @@ {0x8086, 0xa30c, B_S, NT, "Intel", "QM370", enable_flash_pch300}, {0x8086, 0xa30d, B_S, NT, "Intel", "HM370", enable_flash_pch300}, {0x8086, 0xa30e, B_S, DEP, "Intel", "CM246", enable_flash_pch300}, + {0x8086, 0x3482, B_S, DEP, "Intel", "Icelake U Premium", enable_flash_pch300}, #endif {0}, }; -- To view, visit https://review.coreboot.org/c/flashrom/+/37987 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I6227d32f4476420cf1aeec37ebd4b7648e0b3d15 Gerrit-Change-Number: 37987 Gerrit-PatchSet: 1 Gerrit-Owner: Mimoja <coreboot(a)mimoja.de> Gerrit-MessageType: newchange

8 26

Change in ...flashrom[master]: hwaccess: Add endianness converting deserialization functions
by Nico Huber (Code Review) 13 Apr '22

13 Apr '22

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/31016 Change subject: hwaccess: Add endianness converting deserialization functions ...................................................................... hwaccess: Add endianness converting deserialization functions Add functions like uint32_t read_le32(const void *); Change-Id: Idde177acf8bc5f94cd046b6539dc31532c98e452 Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M hwaccess.h 1 file changed, 14 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/16/31016/1 diff --git a/hwaccess.h b/hwaccess.h index af7054b..5df4fc3 100644 --- a/hwaccess.h +++ b/hwaccess.h @@ -20,6 +20,7 @@ #ifndef __HWACCESS_H__ #define __HWACCESS_H__ 1 +#include <stdint.h> #include "platform.h" #if NEED_PCI == 1 @@ -109,6 +110,19 @@ #define le_to_cpu32 cpu_to_le32 #define le_to_cpu64 cpu_to_le64 +#define read_from(endianness, bits) \ +static inline uint##bits##_t read_##endianness##bits(const void *from) \ +{ \ + return le_to_cpu##bits(*(uint##bits##_t *)from); \ +} + +read_from(be, 8) +read_from(be, 16) +read_from(be, 32) +read_from(le, 8) +read_from(le, 16) +read_from(le, 32) + #if NEED_RAW_ACCESS == 1 #if IS_X86 -- To view, visit https://review.coreboot.org/c/flashrom/+/31016 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Idde177acf8bc5f94cd046b6539dc31532c98e452 Gerrit-Change-Number: 31016 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

6 32

Change in flashrom[master]: chipset_enable.c: Enable Tiger Lake U support
by Edward O'Callaghan (Code Review) 11 Apr '22

11 Apr '22

Edward O'Callaghan has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/37777 ) Change subject: chipset_enable.c: Enable Tiger Lake U support ...................................................................... chipset_enable.c: Enable Tiger Lake U support Did a basic local test with --flash-name and -r bios and ran strings to see if the bios contained reasonable data. BUG=b:146089922 Change-Id: I2c13e0173c9b5e17d2ae197f4a4ab9aa2825c1b3 Signed-off-by: Edward O'Callaghan <quasisec(a)google.com> --- M chipset_enable.c 1 file changed, 1 insertion(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/77/37777/1 diff --git a/chipset_enable.c b/chipset_enable.c index b55852c..d5a2f03 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -1996,6 +1996,7 @@ {0x8086, 0x9d56, B_S, NT, "Intel", "Kaby Lake Y Premium", enable_flash_pch100}, {0x8086, 0x9d58, B_S, NT, "Intel", "Kaby Lake U Premium", enable_flash_pch100}, {0x8086, 0x9d84, B_S, DEP, "Intel", "Cannon Lake U Premium", enable_flash_pch300}, + {0x8086, 0xa082, B_FS, NT, "Intel", "Tiger Lake U", enable_flash_pch300}, {0x8086, 0xa141, B_S, NT, "Intel", "Sunrise Point Desktop Sample", enable_flash_pch100}, {0x8086, 0xa142, B_S, NT, "Intel", "Sunrise Point Unknown Sample", enable_flash_pch100}, {0x8086, 0xa143, B_S, NT, "Intel", "H110", enable_flash_pch100}, -- To view, visit https://review.coreboot.org/c/flashrom/+/37777 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I2c13e0173c9b5e17d2ae197f4a4ab9aa2825c1b3 Gerrit-Change-Number: 37777 Gerrit-PatchSet: 1 Gerrit-Owner: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-MessageType: newchange

5 8

Change in flashrom[master]: usbdev: fix accepting shorter serial numbers than the real one.
by Miklós Márton (Code Review) 16 Mar '22

16 Mar '22

Miklós Márton has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/34641 ) Change subject: usbdev: fix accepting shorter serial numbers than the real one. ...................................................................... usbdev: fix accepting shorter serial numbers than the real one. Change-Id: Ife8c4e0a957c4345e27ec9ae9e1480ca80fe505c --- M usbdev.c 1 file changed, 2 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/41/34641/1 diff --git a/usbdev.c b/usbdev.c index 764ac04..7e41235 100644 --- a/usbdev.c +++ b/usbdev.c @@ -104,7 +104,8 @@ msg_pdbg("Serial number is %s\n", myserial); /* Filter out any serial number that does not commence with serialno */ - return 0 != strncmp(serialno, (char *)myserial, strlen(serialno)); + return strlen((char *)myserial) == strlen(serialno) + && 0 != strncmp(serialno, (char *)myserial, strlen(serialno)); } struct libusb_device_handle *usb_dev_get_by_vid_pid_serial( -- To view, visit https://review.coreboot.org/c/flashrom/+/34641 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ife8c4e0a957c4345e27ec9ae9e1480ca80fe505c Gerrit-Change-Number: 34641 Gerrit-PatchSet: 1 Gerrit-Owner: Miklós Márton <martonmiklosqdev(a)gmail.com> Gerrit-MessageType: newchange

2 5

Change in flashrom[master]: Fix segfault when iomem=strict
by Evgeny Zinoviev (Code Review) 09 Mar '22

09 Mar '22

Evgeny Zinoviev has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/48361 ) Change subject: Fix segfault when iomem=strict ...................................................................... Fix segfault when iomem=strict As I can see, physmap_common() only returns ERROR_PTR or a real pointer but never NULL. Tested on Linux 5.9.12. Change-Id: I5b11957fc10fd5c7a4fbb7f54fb94d791590f373 Signed-off-by: Evgeny Zinoviev <me(a)ch1p.io> --- M dmi.c 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/61/48361/1 diff --git a/dmi.c b/dmi.c index c44221c..7488d61 100644 --- a/dmi.c +++ b/dmi.c @@ -164,7 +164,7 @@ unsigned int i = 0, j = 0; uint8_t *dmi_table_mem = physmap_ro("DMI Table", base, len); - if (dmi_table_mem == NULL) { + if (dmi_table_mem == ERROR_PTR) { msg_perr("Unable to access DMI Table\n"); return; } -- To view, visit https://review.coreboot.org/c/flashrom/+/48361 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I5b11957fc10fd5c7a4fbb7f54fb94d791590f373 Gerrit-Change-Number: 48361 Gerrit-PatchSet: 1 Gerrit-Owner: Evgeny Zinoviev <me(a)ch1p.io> Gerrit-MessageType: newchange

3 3

Change in flashrom[master]: flashchips: Add W25Q64.V.M
by Keith Hui (Code Review) 26 Dec '21

26 Dec '21

Keith Hui has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/38578 ) Change subject: flashchips: Add W25Q64.V.M ...................................................................... flashchips: Add W25Q64.V.M Add Winbond W25Q64JV?M SPI flash chip. Some tests were done on a W25Q64JVSSIM mounted on a Sparkfun SOIC-DIP adapter, connected to an Arduino Mega 2560 r3 loaded with frser-duino. Probe and read works, but instability were observed in the connection between Arduino and the chip, so this is being submitted as untested. Datasheet: https://www.winbond.com/resource-files/w25q64jv%20revj%2003272018%20plus.pdf Change-Id: Ib7749835178ee6a1b0fe579e7a0c29e69a67933b Signed-off-by: Keith Hui <buurin(a)gmail.com> --- M flashchips.c M flashchips.h 2 files changed, 41 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/78/38578/1 diff --git a/flashchips.c b/flashchips.c index 65dda0e..bfa2927 100644 --- a/flashchips.c +++ b/flashchips.c @@ -16936,6 +16936,46 @@ { .vendor = "Winbond", + .name = "W25Q64.V.M", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q64_V_M, + .total_size = 8192, + .page_size = 256, + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", .name = "W25Q64.W", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, diff --git a/flashchips.h b/flashchips.h index 14ab6de..bdfadad 100644 --- a/flashchips.h +++ b/flashchips.h @@ -938,6 +938,7 @@ #define WINBOND_NEX_W25Q32_W 0x6016 /* W25Q32DW; W25Q32FV in QPI mode */ #define WINBOND_NEX_W25Q64_W 0x6017 /* W25Q64DW; W25Q64FV in QPI mode */ #define WINBOND_NEX_W25Q128_W 0x6018 /* W25Q128FW; W25Q128FV in QPI mode */ +#define WINBOND_NEX_W25Q64_V_M 0x7017 /* W25Q64JVSIM */ #define WINBOND_NEX_W25Q128_V_M 0x7018 /* W25Q128JVSM */ #define WINBOND_NEX_W25Q256JV_M 0x7019 /* W25Q256JV_M (QE=0) */ #define WINBOND_NEX_W25Q128_DTR 0x8018 /* W25Q128JW_DTR */ -- To view, visit https://review.coreboot.org/c/flashrom/+/38578 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ib7749835178ee6a1b0fe579e7a0c29e69a67933b Gerrit-Change-Number: 38578 Gerrit-PatchSet: 1 Gerrit-Owner: Keith Hui <buurin(a)gmail.com> Gerrit-MessageType: newchange

2 9

Change in flashrom[master]: writeprotect.h,c: Add Winbond support (WIP)
by Edward O'Callaghan (Code Review) 06 Dec '21

06 Dec '21

Edward O'Callaghan has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/45572 ) Change subject: writeprotect.h,c: Add Winbond support (WIP) ...................................................................... writeprotect.h,c: Add Winbond support (WIP) Adds Winbond support. WIP Change-Id: I54eedaa8e24c69d6d088e9ebcfb9a284e0fbe893 Signed-off-by: Edward O'Callaghan <quasisec(a)google.com> --- M writeprotect.c M writeprotect.h 2 files changed, 1,068 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/72/45572/1 diff --git a/writeprotect.c b/writeprotect.c index 0cef19b..1cd3950 100644 --- a/writeprotect.c +++ b/writeprotect.c @@ -87,6 +87,43 @@ struct modifier_bits *m); }; +struct w25q_status { + /* this maps to register layout -- do not change ordering */ + unsigned char busy : 1; + unsigned char wel : 1; + unsigned char bp0 : 1; + unsigned char bp1 : 1; + unsigned char bp2 : 1; + unsigned char tb : 1; + unsigned char sec : 1; + unsigned char srp0 : 1; +} __attribute__ ((packed)); + +/* Status register for large flash layouts with 4 BP bits */ +struct w25q_status_large { + unsigned char busy : 1; + unsigned char wel : 1; + unsigned char bp0 : 1; + unsigned char bp1 : 1; + unsigned char bp2 : 1; + unsigned char bp3 : 1; + unsigned char tb : 1; + unsigned char srp0 : 1; +} __attribute__ ((packed)); + +struct w25q_status_2 { + unsigned char srp1 : 1; + unsigned char qe : 1; + unsigned char rsvd : 6; +} __attribute__ ((packed)); + +int w25_range_to_status(const struct flashctx *flash, + unsigned int start, unsigned int len, + struct w25q_status *status); +int w25_status_to_range(const struct flashctx *flash, + const struct w25q_status *status, + unsigned int *start, unsigned int *len); + /* * Mask to extract write-protect enable and range bits * Status register 1: @@ -100,6 +137,295 @@ #define MASK_WP_AREA_LARGE (0x9C) #define MASK_WP2_AREA (0x01) +static struct wp_range_descriptor w25q16_ranges[] = { + { .m = { .sec = X, .tb = X }, 0, {0, 0} }, /* none */ + { .m = { .sec = 0, .tb = 0 }, 0x1, {0x1f0000, 64 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x2, {0x1e0000, 128 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x3, {0x1c0000, 256 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x4, {0x180000, 512 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x5, {0x100000, 1024 * 1024} }, + + { .m = { .sec = 0, .tb = 1 }, 0x1, {0x000000, 64 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x2, {0x000000, 128 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x3, {0x000000, 256 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x4, {0x000000, 512 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x5, {0x000000, 1024 * 1024} }, + { .m = { .sec = X, .tb = X }, 0x6, {0x000000, 2048 * 1024} }, + { .m = { .sec = X, .tb = X }, 0x7, {0x000000, 2048 * 1024} }, + + { .m = { .sec = 1, .tb = 0 }, 0x1, {0x1ff000, 4 * 1024} }, + { .m = { .sec = 1, .tb = 0 }, 0x2, {0x1fe000, 8 * 1024} }, + { .m = { .sec = 1, .tb = 0 }, 0x3, {0x1fc000, 16 * 1024} }, + { .m = { .sec = 1, .tb = 0 }, 0x4, {0x1f8000, 32 * 1024} }, + { .m = { .sec = 1, .tb = 0 }, 0x5, {0x1f8000, 32 * 1024} }, + + { .m = { .sec = 1, .tb = 1 }, 0x1, {0x000000, 4 * 1024} }, + { .m = { .sec = 1, .tb = 1 }, 0x2, {0x000000, 8 * 1024} }, + { .m = { .sec = 1, .tb = 1 }, 0x3, {0x000000, 16 * 1024} }, + { .m = { .sec = 1, .tb = 1 }, 0x4, {0x000000, 32 * 1024} }, + { .m = { .sec = 1, .tb = 1 }, 0x5, {0x000000, 32 * 1024} }, +}; + +static struct wp_range_descriptor w25q32_ranges[] = { + { .m = { .sec = X, .tb = X }, 0, {0, 0} }, /* none */ + { .m = { .sec = 0, .tb = 0 }, 0x1, {0x3f0000, 64 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x2, {0x3e0000, 128 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x3, {0x3c0000, 256 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x4, {0x380000, 512 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x5, {0x300000, 1024 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x6, {0x200000, 2048 * 1024} }, + + { .m = { .sec = 0, .tb = 1 }, 0x1, {0x000000, 64 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x2, {0x000000, 128 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x3, {0x000000, 256 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x4, {0x000000, 512 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x5, {0x000000, 1024 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x6, {0x000000, 2048 * 1024} }, + { .m = { .sec = X, .tb = X }, 0x7, {0x000000, 4096 * 1024} }, + + { .m = { .sec = 1, .tb = 0 }, 0x1, {0x3ff000, 4 * 1024} }, + { .m = { .sec = 1, .tb = 0 }, 0x2, {0x3fe000, 8 * 1024} }, + { .m = { .sec = 1, .tb = 0 }, 0x3, {0x3fc000, 16 * 1024} }, + { .m = { .sec = 1, .tb = 0 }, 0x4, {0x3f8000, 32 * 1024} }, + { .m = { .sec = 1, .tb = 0 }, 0x5, {0x3f8000, 32 * 1024} }, + + { .m = { .sec = 1, .tb = 1 }, 0x1, {0x000000, 4 * 1024} }, + { .m = { .sec = 1, .tb = 1 }, 0x2, {0x000000, 8 * 1024} }, + { .m = { .sec = 1, .tb = 1 }, 0x3, {0x000000, 16 * 1024} }, + { .m = { .sec = 1, .tb = 1 }, 0x4, {0x000000, 32 * 1024} }, + { .m = { .sec = 1, .tb = 1 }, 0x5, {0x000000, 32 * 1024} }, +}; + +static struct wp_range_descriptor w25q80_ranges[] = { + { .m = { .sec = X, .tb = X }, 0, {0, 0} }, /* none */ + { .m = { .sec = 0, .tb = 0 }, 0x1, {0x0f0000, 64 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x2, {0x0e0000, 128 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x3, {0x0c0000, 256 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x4, {0x080000, 512 * 1024} }, + + { .m = { .sec = 0, .tb = 1 }, 0x1, {0x000000, 64 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x2, {0x000000, 128 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x3, {0x000000, 256 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x4, {0x000000, 512 * 1024} }, + { .m = { .sec = X, .tb = X }, 0x6, {0x000000, 1024 * 1024} }, + { .m = { .sec = X, .tb = X }, 0x7, {0x000000, 1024 * 1024} }, + + { .m = { .sec = 1, .tb = 0 }, 0x1, {0x1ff000, 4 * 1024} }, + { .m = { .sec = 1, .tb = 0 }, 0x2, {0x1fe000, 8 * 1024} }, + { .m = { .sec = 1, .tb = 0 }, 0x3, {0x1fc000, 16 * 1024} }, + { .m = { .sec = 1, .tb = 0 }, 0x4, {0x1f8000, 32 * 1024} }, + { .m = { .sec = 1, .tb = 0 }, 0x5, {0x1f8000, 32 * 1024} }, + + { .m = { .sec = 1, .tb = 1 }, 0x1, {0x000000, 4 * 1024} }, + { .m = { .sec = 1, .tb = 1 }, 0x2, {0x000000, 8 * 1024} }, + { .m = { .sec = 1, .tb = 1 }, 0x3, {0x000000, 16 * 1024} }, + { .m = { .sec = 1, .tb = 1 }, 0x4, {0x000000, 32 * 1024} }, + { .m = { .sec = 1, .tb = 1 }, 0x5, {0x000000, 32 * 1024} }, +}; + +static struct wp_range_descriptor w25q64_ranges[] = { + { .m = { .sec = X, .tb = X }, 0, {0, 0} }, /* none */ + + { .m = { .sec = 0, .tb = 0 }, 0x1, {0x7e0000, 128 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x2, {0x7c0000, 256 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x3, {0x780000, 512 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x4, {0x700000, 1024 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x5, {0x600000, 2048 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x6, {0x400000, 4096 * 1024} }, + + { .m = { .sec = 0, .tb = 1 }, 0x1, {0x000000, 128 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x2, {0x000000, 256 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x3, {0x000000, 512 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x4, {0x000000, 1024 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x5, {0x000000, 2048 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x6, {0x000000, 4096 * 1024} }, + { .m = { .sec = X, .tb = X }, 0x7, {0x000000, 8192 * 1024} }, + + { .m = { .sec = 1, .tb = 0 }, 0x1, {0x7ff000, 4 * 1024} }, + { .m = { .sec = 1, .tb = 0 }, 0x2, {0x7fe000, 8 * 1024} }, + { .m = { .sec = 1, .tb = 0 }, 0x3, {0x7fc000, 16 * 1024} }, + { .m = { .sec = 1, .tb = 0 }, 0x4, {0x7f8000, 32 * 1024} }, + { .m = { .sec = 1, .tb = 0 }, 0x5, {0x7f8000, 32 * 1024} }, + + { .m = { .sec = 1, .tb = 1 }, 0x1, {0x000000, 4 * 1024} }, + { .m = { .sec = 1, .tb = 1 }, 0x2, {0x000000, 8 * 1024} }, + { .m = { .sec = 1, .tb = 1 }, 0x3, {0x000000, 16 * 1024} }, + { .m = { .sec = 1, .tb = 1 }, 0x4, {0x000000, 32 * 1024} }, + { .m = { .sec = 1, .tb = 1 }, 0x5, {0x000000, 32 * 1024} }, +}; + +static struct wp_range_descriptor w25rq128_cmp0_ranges[] = { + { .m = { .sec = X, .tb = X }, 0, {0, 0} }, /* NONE */ + + { .m = { .sec = 0, .tb = 0 }, 0x1, {0xfc0000, 256 * 1024} }, /* Upper 1/64 */ + { .m = { .sec = 0, .tb = 0 }, 0x2, {0xf80000, 512 * 1024} }, /* Upper 1/32 */ + { .m = { .sec = 0, .tb = 0 }, 0x3, {0xf00000, 1024 * 1024} }, /* Upper 1/16 */ + { .m = { .sec = 0, .tb = 0 }, 0x4, {0xe00000, 2048 * 1024} }, /* Upper 1/8 */ + { .m = { .sec = 0, .tb = 0 }, 0x5, {0xc00000, 4096 * 1024} }, /* Upper 1/4 */ + { .m = { .sec = 0, .tb = 0 }, 0x6, {0x800000, 8192 * 1024} }, /* Upper 1/2 */ + + { .m = { .sec = 0, .tb = 1 }, 0x1, {0x000000, 256 * 1024} }, /* Lower 1/64 */ + { .m = { .sec = 0, .tb = 1 }, 0x2, {0x000000, 512 * 1024} }, /* Lower 1/32 */ + { .m = { .sec = 0, .tb = 1 }, 0x3, {0x000000, 1024 * 1024} }, /* Lower 1/16 */ + { .m = { .sec = 0, .tb = 1 }, 0x4, {0x000000, 2048 * 1024} }, /* Lower 1/8 */ + { .m = { .sec = 0, .tb = 1 }, 0x5, {0x000000, 4096 * 1024} }, /* Lower 1/4 */ + { .m = { .sec = 0, .tb = 1 }, 0x6, {0x000000, 8192 * 1024} }, /* Lower 1/2 */ + + { .m = { .sec = X, .tb = X }, 0x7, {0x000000, 16384 * 1024} }, /* ALL */ + + { .m = { .sec = 1, .tb = 0 }, 0x1, {0xfff000, 4 * 1024} }, /* Upper 1/4096 */ + { .m = { .sec = 1, .tb = 0 }, 0x2, {0xffe000, 8 * 1024} }, /* Upper 1/2048 */ + { .m = { .sec = 1, .tb = 0 }, 0x3, {0xffc000, 16 * 1024} }, /* Upper 1/1024 */ + { .m = { .sec = 1, .tb = 0 }, 0x4, {0xff8000, 32 * 1024} }, /* Upper 1/512 */ + { .m = { .sec = 1, .tb = 0 }, 0x5, {0xff8000, 32 * 1024} }, /* Upper 1/512 */ + + { .m = { .sec = 1, .tb = 1 }, 0x1, {0x000000, 4 * 1024} }, /* Lower 1/4096 */ + { .m = { .sec = 1, .tb = 1 }, 0x2, {0x000000, 8 * 1024} }, /* Lower 1/2048 */ + { .m = { .sec = 1, .tb = 1 }, 0x3, {0x000000, 16 * 1024} }, /* Lower 1/1024 */ + { .m = { .sec = 1, .tb = 1 }, 0x4, {0x000000, 32 * 1024} }, /* Lower 1/512 */ + { .m = { .sec = 1, .tb = 1 }, 0x5, {0x000000, 32 * 1024} }, /* Lower 1/512 */ +}; + +static struct wp_range_descriptor w25rq128_cmp1_ranges[] = { + { .m = { .sec = X, .tb = X }, 0x0, {0x000000, 16 * 1024 * 1024} }, /* ALL */ + + { .m = { .sec = 0, .tb = 0 }, 0x1, {0x000000, 16128 * 1024} }, /* Lower 63/64 */ + { .m = { .sec = 0, .tb = 0 }, 0x2, {0x000000, 15872 * 1024} }, /* Lower 31/32 */ + { .m = { .sec = 0, .tb = 0 }, 0x3, {0x000000, 15 * 1024 * 1024} }, /* Lower 15/16 */ + { .m = { .sec = 0, .tb = 0 }, 0x4, {0x000000, 14 * 1024 * 1024} }, /* Lower 7/8 */ + { .m = { .sec = 0, .tb = 0 }, 0x5, {0x000000, 12 * 1024 * 1024} }, /* Lower 3/4 */ + { .m = { .sec = 0, .tb = 0 }, 0x6, {0x000000, 8 * 1024 * 1024} }, /* Lower 1/2 */ + + { .m = { .sec = 0, .tb = 1 }, 0x1, {0x040000, 16128 * 1024} }, /* Upper 63/64 */ + { .m = { .sec = 0, .tb = 1 }, 0x2, {0x080000, 15872 * 1024} }, /* Upper 31/32 */ + { .m = { .sec = 0, .tb = 1 }, 0x3, {0x100000, 15 * 1024 * 1024} }, /* Upper 15/16 */ + { .m = { .sec = 0, .tb = 1 }, 0x4, {0x200000, 14 * 1024 * 1024} }, /* Upper 7/8 */ + { .m = { .sec = 0, .tb = 1 }, 0x5, {0x400000, 12 * 1024 * 1024} }, /* Upper 3/4 */ + { .m = { .sec = 0, .tb = 1 }, 0x6, {0x800000, 8 * 1024 * 1024} }, /* Upper 1/2 */ + + { .m = { .sec = X, .tb = X }, 0x7, {0x000000, 0} }, /* NONE */ + + { .m = { .sec = 1, .tb = 0 }, 0x1, {0x000000, 16380 * 1024} }, /* Lower 4095/4096 */ + { .m = { .sec = 1, .tb = 0 }, 0x2, {0x000000, 16376 * 1024} }, /* Lower 2048/2048 */ + { .m = { .sec = 1, .tb = 0 }, 0x3, {0x000000, 16368 * 1024} }, /* Lower 1023/1024 */ + { .m = { .sec = 1, .tb = 0 }, 0x4, {0x000000, 16352 * 1024} }, /* Lower 511/512 */ + { .m = { .sec = 1, .tb = 0 }, 0x5, {0x000000, 16352 * 1024} }, /* Lower 511/512 */ + + { .m = { .sec = 1, .tb = 1 }, 0x1, {0x001000, 16380 * 1024} }, /* Upper 4095/4096 */ + { .m = { .sec = 1, .tb = 1 }, 0x2, {0x002000, 16376 * 1024} }, /* Upper 2047/2048 */ + { .m = { .sec = 1, .tb = 1 }, 0x3, {0x004000, 16368 * 1024} }, /* Upper 1023/1024 */ + { .m = { .sec = 1, .tb = 1 }, 0x4, {0x008000, 16352 * 1024} }, /* Upper 511/512 */ + { .m = { .sec = 1, .tb = 1 }, 0x5, {0x008000, 16352 * 1024} }, /* Upper 511/512 */ +}; + +static struct wp_range_descriptor w25rq256_cmp0_ranges[] = { + { .m = { .sec = X, .tb = X }, 0x0, {0x0000000, 0x0000000} }, /* NONE */ + + { .m = { .sec = X, .tb = 0 }, 0x1, {0x1ff0000, 64 * 1 * 1024} }, /* Upper 1/512 */ + { .m = { .sec = X, .tb = 0 }, 0x2, {0x1fe0000, 64 * 2 * 1024} }, /* Upper 1/256 */ + { .m = { .sec = X, .tb = 0 }, 0x3, {0x1fc0000, 64 * 4 * 1024} }, /* Upper 1/128 */ + { .m = { .sec = X, .tb = 0 }, 0x4, {0x1f80000, 64 * 8 * 1024} }, /* Upper 1/64 */ + { .m = { .sec = X, .tb = 0 }, 0x5, {0x1f00000, 64 * 16 * 1024} }, /* Upper 1/32 */ + { .m = { .sec = X, .tb = 0 }, 0x6, {0x1e00000, 64 * 32 * 1024} }, /* Upper 1/16 */ + { .m = { .sec = X, .tb = 0 }, 0x7, {0x1c00000, 64 * 64 * 1024} }, /* Upper 1/8 */ + { .m = { .sec = X, .tb = 0 }, 0x8, {0x1800000, 64 * 128 * 1024} }, /* Upper 1/4 */ + { .m = { .sec = X, .tb = 0 }, 0x9, {0x1000000, 64 * 256 * 1024} }, /* Upper 1/2 */ + + { .m = { .sec = X, .tb = 1 }, 0x1, {0x0000000, 64 * 1 * 1024} }, /* Lower 1/512 */ + { .m = { .sec = X, .tb = 1 }, 0x2, {0x0000000, 64 * 2 * 1024} }, /* Lower 1/256 */ + { .m = { .sec = X, .tb = 1 }, 0x3, {0x0000000, 64 * 4 * 1024} }, /* Lower 1/128 */ + { .m = { .sec = X, .tb = 1 }, 0x4, {0x0000000, 64 * 8 * 1024} }, /* Lower 1/64 */ + { .m = { .sec = X, .tb = 1 }, 0x5, {0x0000000, 64 * 16 * 1024} }, /* Lower 1/32 */ + { .m = { .sec = X, .tb = 1 }, 0x6, {0x0000000, 64 * 32 * 1024} }, /* Lower 1/16 */ + { .m = { .sec = X, .tb = 1 }, 0x7, {0x0000000, 64 * 64 * 1024} }, /* Lower 1/8 */ + { .m = { .sec = X, .tb = 1 }, 0x8, {0x0000000, 64 * 128 * 1024} }, /* Lower 1/4 */ + { .m = { .sec = X, .tb = 1 }, 0x9, {0x0000000, 64 * 256 * 1024} }, /* Lower 1/2 */ + + { .m = { .sec = X, .tb = X }, 0xa, {0x0000000, 64 * 512 * 1024} }, /* ALL */ + { .m = { .sec = X, .tb = X }, 0xb, {0x0000000, 64 * 512 * 1024} }, /* ALL */ + { .m = { .sec = X, .tb = X }, 0xc, {0x0000000, 64 * 512 * 1024} }, /* ALL */ + { .m = { .sec = X, .tb = X }, 0xd, {0x0000000, 64 * 512 * 1024} }, /* ALL */ + { .m = { .sec = X, .tb = X }, 0xe, {0x0000000, 64 * 512 * 1024} }, /* ALL */ + { .m = { .sec = X, .tb = X }, 0xf, {0x0000000, 64 * 512 * 1024} }, /* ALL */ +}; + +static struct wp_range_descriptor w25rq256_cmp1_ranges[] = { + { .m = { .sec = X, .tb = X }, 0x0, {0x0000000, 64 * 512 * 1024} }, /* ALL */ + + { .m = { .sec = X, .tb = 0 }, 0x1, {0x0000000, 64 * 511 * 1024} }, /* Lower 511/512 */ + { .m = { .sec = X, .tb = 0 }, 0x2, {0x0000000, 64 * 510 * 1024} }, /* Lower 255/256 */ + { .m = { .sec = X, .tb = 0 }, 0x3, {0x0000000, 64 * 508 * 1024} }, /* Lower 127/128 */ + { .m = { .sec = X, .tb = 0 }, 0x4, {0x0000000, 64 * 504 * 1024} }, /* Lower 63/64 */ + { .m = { .sec = X, .tb = 0 }, 0x5, {0x0000000, 64 * 496 * 1024} }, /* Lower 31/32 */ + { .m = { .sec = X, .tb = 0 }, 0x6, {0x0000000, 64 * 480 * 1024} }, /* Lower 15/16 */ + { .m = { .sec = X, .tb = 0 }, 0x7, {0x0000000, 64 * 448 * 1024} }, /* Lower 7/8 */ + { .m = { .sec = X, .tb = 0 }, 0x8, {0x0000000, 64 * 384 * 1024} }, /* Lower 3/4 */ + { .m = { .sec = X, .tb = 0 }, 0x9, {0x0000000, 64 * 256 * 1024} }, /* Lower 1/2 */ + + { .m = { .sec = X, .tb = 1 }, 0x1, {0x0010000, 64 * 511 * 1024} }, /* Upper 511/512 */ + { .m = { .sec = X, .tb = 1 }, 0x2, {0x0020000, 64 * 510 * 1024} }, /* Upper 255/256 */ + { .m = { .sec = X, .tb = 1 }, 0x3, {0x0040000, 64 * 508 * 1024} }, /* Upper 127/128 */ + { .m = { .sec = X, .tb = 1 }, 0x4, {0x0080000, 64 * 504 * 1024} }, /* Upper 63/64 */ + { .m = { .sec = X, .tb = 1 }, 0x5, {0x0100000, 64 * 496 * 1024} }, /* Upper 31/32 */ + { .m = { .sec = X, .tb = 1 }, 0x6, {0x0200000, 64 * 480 * 1024} }, /* Upper 15/16 */ + { .m = { .sec = X, .tb = 1 }, 0x7, {0x0400000, 64 * 448 * 1024} }, /* Upper 7/8 */ + { .m = { .sec = X, .tb = 1 }, 0x8, {0x0800000, 64 * 384 * 1024} }, /* Upper 3/4 */ + { .m = { .sec = X, .tb = 1 }, 0x9, {0x1000000, 64 * 256 * 1024} }, /* Upper 1/2 */ + + { .m = { .sec = X, .tb = X }, 0xa, {0x0000000, 0x0000000} }, /* NONE */ + { .m = { .sec = X, .tb = X }, 0xb, {0x0000000, 0x0000000} }, /* NONE */ + { .m = { .sec = X, .tb = X }, 0xc, {0x0000000, 0x0000000} }, /* NONE */ + { .m = { .sec = X, .tb = X }, 0xd, {0x0000000, 0x0000000} }, /* NONE */ + { .m = { .sec = X, .tb = X }, 0xe, {0x0000000, 0x0000000} }, /* NONE */ + { .m = { .sec = X, .tb = X }, 0xf, {0x0000000, 0x0000000} }, /* NONE */ +}; + +struct wp_range_descriptor w25x10_ranges[] = { + { .m = { .sec = X, .tb = X }, 0, {0, 0} }, /* none */ + { .m = { .sec = 0, .tb = 0 }, 0x1, {0x010000, 64 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x1, {0x000000, 64 * 1024} }, + { .m = { .sec = X, .tb = X }, 0x2, {0x000000, 128 * 1024} }, + { .m = { .sec = X, .tb = X }, 0x3, {0x000000, 128 * 1024} }, +}; + +struct wp_range_descriptor w25x20_ranges[] = { + { .m = { .sec = X, .tb = X }, 0, {0, 0} }, /* none */ + { .m = { .sec = 0, .tb = 0 }, 0x1, {0x030000, 64 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x2, {0x020000, 128 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x1, {0x000000, 64 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x2, {0x000000, 128 * 1024} }, + { .m = { .sec = 0, .tb = X }, 0x3, {0x000000, 256 * 1024} }, +}; + +struct wp_range_descriptor w25x40_ranges[] = { + { .m = { .sec = X, .tb = X }, 0, {0, 0} }, /* none */ + { .m = { .sec = 0, .tb = 0 }, 0x1, {0x070000, 64 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x2, {0x060000, 128 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x3, {0x040000, 256 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x1, {0x000000, 64 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x2, {0x000000, 128 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x3, {0x000000, 256 * 1024} }, + { .m = { .sec = 0, .tb = X }, 0x4, {0x000000, 512 * 1024} }, + { .m = { .sec = 0, .tb = X }, 0x5, {0x000000, 512 * 1024} }, + { .m = { .sec = 0, .tb = X }, 0x6, {0x000000, 512 * 1024} }, + { .m = { .sec = 0, .tb = X }, 0x7, {0x000000, 512 * 1024} }, +}; + +struct wp_range_descriptor w25x80_ranges[] = { + { .m = { .sec = X, .tb = X }, 0, {0, 0} }, /* none */ + { .m = { .sec = 0, .tb = 0 }, 0x1, {0x0F0000, 64 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x2, {0x0E0000, 128 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x3, {0x0C0000, 256 * 1024} }, + { .m = { .sec = 0, .tb = 0 }, 0x4, {0x080000, 512 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x1, {0x000000, 64 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x2, {0x000000, 128 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x3, {0x000000, 256 * 1024} }, + { .m = { .sec = 0, .tb = 1 }, 0x4, {0x000000, 512 * 1024} }, + { .m = { .sec = 0, .tb = X }, 0x5, {0x000000, 1024 * 1024} }, + { .m = { .sec = 0, .tb = X }, 0x6, {0x000000, 1024 * 1024} }, + { .m = { .sec = 0, .tb = X }, 0x7, {0x000000, 1024 * 1024} }, +}; + static uint8_t do_read_status(const struct flashctx *flash) { if (flash->chip->read_status) @@ -116,6 +442,591 @@ return spi_write_status_register(flash, status); } +/* FIXME: Move to spi25.c if it's a JEDEC standard opcode */ +static uint8_t w25q_read_status_register_2(const struct flashctx *flash) +{ + static const unsigned char cmd[JEDEC_RDSR_OUTSIZE] = { 0x35 }; + unsigned char readarr[2]; + int ret; + + /* Read Status Register */ + ret = spi_send_command(flash, sizeof(cmd), sizeof(readarr), cmd, readarr); + if (ret) { + /* + * FIXME: make this a benign failure for now in case we are + * unable to execute the opcode + */ + msg_cdbg("RDSR2 failed!\n"); + readarr[0] = 0x00; + } + + return readarr[0]; +} + +/* Given a flash chip, this function returns its range table. */ +static int w25_range_table(const struct flashctx *flash, + struct wp_range_descriptor **descrs, + int *num_entries) +{ + *descrs = 0; + *num_entries = 0; + + switch (flash->chip->manufacture_id) { + case WINBOND_NEX_ID: + switch(flash->chip->model_id) { + case WINBOND_NEX_W25X10: + *descrs = w25x10_ranges; + *num_entries = ARRAY_SIZE(w25x10_ranges); + break; + case WINBOND_NEX_W25X20: + *descrs = w25x20_ranges; + *num_entries = ARRAY_SIZE(w25x20_ranges); + break; + case WINBOND_NEX_W25X40: + *descrs = w25x40_ranges; + *num_entries = ARRAY_SIZE(w25x40_ranges); + break; + case WINBOND_NEX_W25X80: + *descrs = w25x80_ranges; + *num_entries = ARRAY_SIZE(w25x80_ranges); + break; + case WINBOND_NEX_W25Q80_V: + *descrs = w25q80_ranges; + *num_entries = ARRAY_SIZE(w25q80_ranges); + break; + case WINBOND_NEX_W25Q16_V: + *descrs = w25q16_ranges; + *num_entries = ARRAY_SIZE(w25q16_ranges); + break; + case WINBOND_NEX_W25Q32_V: + case WINBOND_NEX_W25Q32_W: + //case WINBOND_NEX_W25Q32JW: + *descrs = w25q32_ranges; + *num_entries = ARRAY_SIZE(w25q32_ranges); + break; + case WINBOND_NEX_W25Q64_V: + case WINBOND_NEX_W25Q64_W: + *descrs = w25q64_ranges; + *num_entries = ARRAY_SIZE(w25q64_ranges); + break; + case WINBOND_NEX_W25Q128_DTR: + case WINBOND_NEX_W25Q128_V_M: + case WINBOND_NEX_W25Q128_V: + case WINBOND_NEX_W25Q128_W: + if (w25q_read_status_register_2(flash) & (1 << 6)) { + /* CMP == 1 */ + *descrs = w25rq128_cmp1_ranges; + *num_entries = ARRAY_SIZE(w25rq128_cmp1_ranges); + } else { + /* CMP == 0 */ + *descrs = w25rq128_cmp0_ranges; + *num_entries = ARRAY_SIZE(w25rq128_cmp0_ranges); + } + break; + case WINBOND_NEX_W25Q256JV_M: + if (w25q_read_status_register_2(flash) & (1 << 6)) { + /* CMP == 1 */ + *descrs = w25rq256_cmp1_ranges; + *num_entries = ARRAY_SIZE(w25rq256_cmp1_ranges); + } else { + /* CMP == 0 */ + *descrs = w25rq256_cmp0_ranges; + *num_entries = ARRAY_SIZE(w25rq256_cmp0_ranges); + } + break; + default: + msg_cerr("%s() %d: WINBOND flash chip mismatch (0x%04x)" + ", aborting\n", __func__, __LINE__, + flash->chip->model_id); + return -1; + } + break; + default: + msg_cerr("%s: flash vendor (0x%x) not found, aborting\n", + __func__, flash->chip->manufacture_id); + return -1; + } + + return 0; +} + +int w25_range_to_status(const struct flashctx *flash, + unsigned int start, unsigned int len, + struct w25q_status *status) +{ + struct wp_range_descriptor *descrs; + int i, range_found = 0; + int num_entries; + + if (w25_range_table(flash, &descrs, &num_entries)) + return -1; + + for (i = 0; i < num_entries; i++) { + struct wp_range *r = &descrs[i].range; + + msg_cspew("comparing range 0x%x 0x%x / 0x%x 0x%x\n", + start, len, r->start, r->len); + if ((start == r->start) && (len == r->len)) { + status->bp0 = descrs[i].bp & 1; + status->bp1 = descrs[i].bp >> 1; + status->bp2 = descrs[i].bp >> 2; + status->tb = descrs[i].m.tb; + status->sec = descrs[i].m.sec; + + range_found = 1; + break; + } + } + + if (!range_found) { + msg_cerr("%s: matching range not found\n", __func__); + return -1; + } + + return 0; +} + +int w25_status_to_range(const struct flashctx *flash, + const struct w25q_status *status, + unsigned int *start, unsigned int *len) +{ + struct wp_range_descriptor *descrs; + int i, status_found = 0; + int num_entries; + + if (w25_range_table(flash, &descrs, &num_entries)) + return -1; + + for (i = 0; i < num_entries; i++) { + int bp; + int table_bp, table_tb, table_sec; + + bp = status->bp0 | (status->bp1 << 1) | (status->bp2 << 2); + msg_cspew("comparing 0x%x 0x%x / 0x%x 0x%x / 0x%x 0x%x\n", + bp, descrs[i].bp, + status->tb, descrs[i].m.tb, + status->sec, descrs[i].m.sec); + table_bp = descrs[i].bp; + table_tb = descrs[i].m.tb; + table_sec = descrs[i].m.sec; + if ((bp == table_bp || table_bp == X) && + (status->tb == table_tb || table_tb == X) && + (status->sec == table_sec || table_sec == X)) { + *start = descrs[i].range.start; + *len = descrs[i].range.len; + + status_found = 1; + break; + } + } + + if (!status_found) { + msg_cerr("matching status not found\n"); + return -1; + } + + return 0; +} + +/* Given a [start, len], this function calls w25_range_to_status() to convert + * it to flash-chip-specific range bits, then sets into status register. + */ +static int w25_set_range(const struct flashctx *flash, + unsigned int start, unsigned int len) +{ + struct w25q_status status; + int tmp = 0; + int expected = 0; + + memset(&status, 0, sizeof(status)); + tmp = do_read_status(flash); + memcpy(&status, &tmp, 1); + msg_cdbg("%s: old status: 0x%02x\n", __func__, tmp); + + if (w25_range_to_status(flash, start, len, &status)) + return -1; + + msg_cdbg("status.busy: %x\n", status.busy); + msg_cdbg("status.wel: %x\n", status.wel); + msg_cdbg("status.bp0: %x\n", status.bp0); + msg_cdbg("status.bp1: %x\n", status.bp1); + msg_cdbg("status.bp2: %x\n", status.bp2); + msg_cdbg("status.tb: %x\n", status.tb); + msg_cdbg("status.sec: %x\n", status.sec); + msg_cdbg("status.srp0: %x\n", status.srp0); + + memcpy(&expected, &status, sizeof(status)); + do_write_status(flash, expected); + + tmp = do_read_status(flash); + msg_cdbg("%s: new status: 0x%02x\n", __func__, tmp); + if ((tmp & MASK_WP_AREA) != (expected & MASK_WP_AREA)) { + msg_cerr("expected=0x%02x, but actual=0x%02x.\n", + expected, tmp); + return 1; + } + + return 0; +} + +/* Print out the current status register value with human-readable text. */ +static int w25_wp_status(const struct flashctx *flash) +{ + struct w25q_status status; + int tmp; + unsigned int start, len; + int ret = 0; + + memset(&status, 0, sizeof(status)); + tmp = do_read_status(flash); + memcpy(&status, &tmp, 1); + msg_cinfo("WP: status: 0x%02x\n", tmp); + msg_cinfo("WP: status.srp0: %x\n", status.srp0); + msg_cinfo("WP: write protect is %s.\n", + status.srp0 ? "enabled" : "disabled"); + + msg_cinfo("WP: write protect range: "); + if (w25_status_to_range(flash, &status, &start, &len)) { + msg_cinfo("(cannot resolve the range)\n"); + ret = -1; + } else { + msg_cinfo("start=0x%08x, len=0x%08x\n", start, len); + } + + return ret; +} + +static int w25q_large_range_to_status(const struct flashctx *flash, + unsigned int start, unsigned int len, + struct w25q_status_large *status) +{ + struct wp_range_descriptor *descrs; + int i, range_found = 0; + int num_entries; + + if (w25_range_table(flash, &descrs, &num_entries)) + return -1; + + for (i = 0; i < num_entries; i++) { + struct wp_range *r = &descrs[i].range; + + msg_cspew("comparing range 0x%x 0x%x / 0x%x 0x%x\n", + start, len, r->start, r->len); + if ((start == r->start) && (len == r->len)) { + status->bp0 = descrs[i].bp & 1; + status->bp1 = descrs[i].bp >> 1; + status->bp2 = descrs[i].bp >> 2; + status->bp3 = descrs[i].bp >> 3; + /* + * For MX25U12835E chip, Top/Bottom (T/B) bit is not + * part of status register and in that bit position is + * Quad Enable (QE) + */ + if (flash->chip->manufacture_id != MACRONIX_ID || + flash->chip->model_id != MACRONIX_MX25U12835E) + status->tb = descrs[i].m.tb; + + range_found = 1; + break; + } + } + + if (!range_found) { + msg_cerr("%s: matching range not found\n", __func__); + return -1; + } + + return 0; +} + +static int w25_large_status_to_range(const struct flashctx *flash, + const struct w25q_status_large *status, + unsigned int *start, unsigned int *len) +{ + struct wp_range_descriptor *descrs; + int i, status_found = 0; + int num_entries; + + if (w25_range_table(flash, &descrs, &num_entries)) + return -1; + + for (i = 0; i < num_entries; i++) { + int bp; + int table_bp, table_tb; + + bp = status->bp0 | (status->bp1 << 1) | (status->bp2 << 2) | + (status->bp3 << 3); + msg_cspew("comparing 0x%x 0x%x / 0x%x 0x%x\n", + bp, descrs[i].bp, + status->tb, descrs[i].m.tb); + table_bp = descrs[i].bp; + table_tb = descrs[i].m.tb; + if ((bp == table_bp || table_bp == X) && + (status->tb == table_tb || table_tb == X)) { + *start = descrs[i].range.start; + *len = descrs[i].range.len; + + status_found = 1; + break; + } + } + + if (!status_found) { + msg_cerr("matching status not found\n"); + return -1; + } + + return 0; +} + +/* Given a [start, len], this function calls w25_range_to_status() to convert + * it to flash-chip-specific range bits, then sets into status register. + * Returns 0 if successful, -1 on error, and 1 if reading back was different. + */ +static int w25q_large_set_range(const struct flashctx *flash, + unsigned int start, unsigned int len) +{ + struct w25q_status_large status; + int tmp; + int expected = 0; + + memset(&status, 0, sizeof(status)); + tmp = do_read_status(flash); + memcpy(&status, &tmp, 1); + msg_cdbg("%s: old status: 0x%02x\n", __func__, tmp); + + if (w25q_large_range_to_status(flash, start, len, &status)) + return -1; + + msg_cdbg("status.busy: %x\n", status.busy); + msg_cdbg("status.wel: %x\n", status.wel); + msg_cdbg("status.bp0: %x\n", status.bp0); + msg_cdbg("status.bp1: %x\n", status.bp1); + msg_cdbg("status.bp2: %x\n", status.bp2); + msg_cdbg("status.bp3: %x\n", status.bp3); + msg_cdbg("status.tb: %x\n", status.tb); + msg_cdbg("status.srp0: %x\n", status.srp0); + + memcpy(&expected, &status, sizeof(status)); + do_write_status(flash, expected); + + tmp = do_read_status(flash); + msg_cdbg("%s: new status: 0x%02x\n", __func__, tmp); + if ((tmp & MASK_WP_AREA_LARGE) != (expected & MASK_WP_AREA_LARGE)) { + msg_cerr("expected=0x%02x, but actual=0x%02x.\n", + expected, tmp); + return 1; + } + + return 0; +} + +static int w25q_large_wp_status(const struct flashctx *flash) +{ + struct w25q_status_large sr1; + struct w25q_status_2 sr2; + uint8_t tmp[2]; + unsigned int start, len; + int ret = 0; + + memset(&sr1, 0, sizeof(sr1)); + tmp[0] = do_read_status(flash); + memcpy(&sr1, &tmp[0], 1); + + memset(&sr2, 0, sizeof(sr2)); + tmp[1] = w25q_read_status_register_2(flash); + memcpy(&sr2, &tmp[1], 1); + + msg_cinfo("WP: status: 0x%02x%02x\n", tmp[1], tmp[0]); + msg_cinfo("WP: status.srp0: %x\n", sr1.srp0); + msg_cinfo("WP: status.srp1: %x\n", sr2.srp1); + msg_cinfo("WP: write protect is %s.\n", + (sr1.srp0 || sr2.srp1) ? "enabled" : "disabled"); + + msg_cinfo("WP: write protect range: "); + if (w25_large_status_to_range(flash, &sr1, &start, &len)) { + msg_cinfo("(cannot resolve the range)\n"); + ret = -1; + } else { + msg_cinfo("start=0x%08x, len=0x%08x\n", start, len); + } + + return ret; +} + +/* Set/clear the SRP0 bit in the status register. */ +static int w25_set_srp0(const struct flashctx *flash, int enable) +{ + struct w25q_status status; + int tmp = 0; + int expected = 0; + + memset(&status, 0, sizeof(status)); + tmp = do_read_status(flash); + /* FIXME: this is NOT endian-free copy. */ + memcpy(&status, &tmp, 1); + msg_cdbg("%s: old status: 0x%02x\n", __func__, tmp); + + status.srp0 = enable ? 1 : 0; + memcpy(&expected, &status, sizeof(status)); + do_write_status(flash, expected); + + tmp = do_read_status(flash); + msg_cdbg("%s: new status: 0x%02x\n", __func__, tmp); + if ((tmp & MASK_WP_AREA) != (expected & MASK_WP_AREA)) + return 1; + + return 0; +} + +static int w25_enable_writeprotect(const struct flashctx *flash, + enum wp_mode wp_mode) +{ + int ret; + + if (wp_mode != WP_MODE_HARDWARE) { + msg_cerr("%s(): unsupported write-protect mode\n", __func__); + return 1; + } + + ret = w25_set_srp0(flash, 1); + if (ret) + msg_cerr("%s(): error=%d.\n", __func__, ret); + return ret; +} + +static int w25_disable_writeprotect(const struct flashctx *flash) +{ + int ret; + + ret = w25_set_srp0(flash, 0); + if (ret) + msg_cerr("%s(): error=%d.\n", __func__, ret); + + return ret; +} + +static int w25_list_ranges(const struct flashctx *flash) +{ + struct wp_range_descriptor *descrs; + int i, num_entries; + + if (w25_range_table(flash, &descrs, &num_entries)) + return -1; + + for (i = 0; i < num_entries; i++) { + msg_cinfo("start: 0x%06x, length: 0x%06x\n", + descrs[i].range.start, + descrs[i].range.len); + } + + return 0; +} + +static int w25q_wp_status(const struct flashctx *flash) +{ + struct w25q_status sr1; + struct w25q_status_2 sr2; + uint8_t tmp[2]; + unsigned int start, len; + int ret = 0; + + memset(&sr1, 0, sizeof(sr1)); + tmp[0] = do_read_status(flash); + memcpy(&sr1, &tmp[0], 1); + + memset(&sr2, 0, sizeof(sr2)); + tmp[1] = w25q_read_status_register_2(flash); + memcpy(&sr2, &tmp[1], 1); + + msg_cinfo("WP: status: 0x%02x%02x\n", tmp[1], tmp[0]); + msg_cinfo("WP: status.srp0: %x\n", sr1.srp0); + msg_cinfo("WP: status.srp1: %x\n", sr2.srp1); + msg_cinfo("WP: write protect is %s.\n", + (sr1.srp0 || sr2.srp1) ? "enabled" : "disabled"); + + msg_cinfo("WP: write protect range: "); + if (w25_status_to_range(flash, &sr1, &start, &len)) { + msg_cinfo("(cannot resolve the range)\n"); + ret = -1; + } else { + msg_cinfo("start=0x%08x, len=0x%08x\n", start, len); + } + + return ret; +} + +/* + * W25Q adds an optional byte to the standard WRSR opcode. If /CS is + * de-asserted after the first byte, then it acts like a JEDEC-standard + * WRSR command. if /CS is asserted, then the next data byte is written + * into status register 2. + */ +#define W25Q_WRSR_OUTSIZE 0x03 +static int w25q_write_status_register_WREN(const struct flashctx *flash, uint8_t s1, uint8_t s2) +{ + int result; + struct spi_command cmds[] = { + { + /* FIXME: WRSR requires either EWSR or WREN depending on chip type. */ + .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = W25Q_WRSR_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WRSR, s1, s2 }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + result = spi_send_multicommand(flash, cmds); + if (result) { + msg_cerr("%s failed during command execution\n", + __func__); + } + + /* WRSR performs a self-timed erase before the changes take effect. */ + programmer_delay(100 * 1000); + + return result; +} + +/* + * Set/clear the SRP1 bit in status register 2. + * FIXME: make this more generic if other chips use the same SR2 layout + */ +static int w25q_set_srp1(const struct flashctx *flash, int enable) +{ + struct w25q_status sr1; + struct w25q_status_2 sr2; + uint8_t tmp, expected; + + tmp = do_read_status(flash); + memcpy(&sr1, &tmp, 1); + tmp = w25q_read_status_register_2(flash); + memcpy(&sr2, &tmp, 1); + + msg_cdbg("%s: old status 2: 0x%02x\n", __func__, tmp); + + sr2.srp1 = enable ? 1 : 0; + + memcpy(&expected, &sr2, 1); + w25q_write_status_register_WREN(flash, *((uint8_t *)&sr1), *((uint8_t *)&sr2)); + + tmp = w25q_read_status_register_2(flash); + msg_cdbg("%s: new status 2: 0x%02x\n", __func__, tmp); + if ((tmp & MASK_WP2_AREA) != (expected & MASK_WP2_AREA)) + return 1; + + return 0; +} + enum wp_mode get_wp_mode(const char *mode_str) { enum wp_mode wp_mode = WP_MODE_UNKNOWN; @@ -130,6 +1041,158 @@ return wp_mode; } +static int w25q_disable_writeprotect(const struct flashctx *flash, + enum wp_mode wp_mode) +{ + int ret = 1; + struct w25q_status_2 sr2; + uint8_t tmp; + + switch (wp_mode) { + case WP_MODE_HARDWARE: + ret = w25_set_srp0(flash, 0); + break; + case WP_MODE_POWER_CYCLE: + tmp = w25q_read_status_register_2(flash); + memcpy(&sr2, &tmp, 1); + if (sr2.srp1) { + msg_cerr("%s(): must disconnect power to disable " + "write-protection\n", __func__); + } else { + ret = 0; + } + break; + case WP_MODE_PERMANENT: + msg_cerr("%s(): cannot disable permanent write-protection\n", + __func__); + break; + default: + msg_cerr("%s(): invalid mode specified\n", __func__); + break; + } + + if (ret) + msg_cerr("%s(): error=%d.\n", __func__, ret); + + return ret; +} + +static int w25q_disable_writeprotect_default(const struct flashctx *flash) +{ + return w25q_disable_writeprotect(flash, WP_MODE_HARDWARE); +} + +static int w25q_enable_writeprotect(const struct flashctx *flash, + enum wp_mode wp_mode) +{ + int ret = 1; + struct w25q_status sr1; + struct w25q_status_2 sr2; + uint8_t tmp; + + switch (wp_mode) { + case WP_MODE_HARDWARE: + if (w25q_disable_writeprotect(flash, WP_MODE_POWER_CYCLE)) { + msg_cerr("%s(): cannot disable power cycle WP mode\n", + __func__); + break; + } + + tmp = do_read_status(flash); + memcpy(&sr1, &tmp, 1); + if (sr1.srp0) + ret = 0; + else + ret = w25_set_srp0(flash, 1); + + break; + case WP_MODE_POWER_CYCLE: + if (w25q_disable_writeprotect(flash, WP_MODE_HARDWARE)) { + msg_cerr("%s(): cannot disable hardware WP mode\n", + __func__); + break; + } + + tmp = w25q_read_status_register_2(flash); + memcpy(&sr2, &tmp, 1); + if (sr2.srp1) + ret = 0; + else + ret = w25q_set_srp1(flash, 1); + + break; + case WP_MODE_PERMANENT: + tmp = do_read_status(flash); + memcpy(&sr1, &tmp, 1); + if (sr1.srp0 == 0) { + ret = w25_set_srp0(flash, 1); + if (ret) { + msg_perr("%s(): cannot enable SRP0 for " + "permanent WP\n", __func__); + break; + } + } + + tmp = w25q_read_status_register_2(flash); + memcpy(&sr2, &tmp, 1); + if (sr2.srp1 == 0) { + ret = w25q_set_srp1(flash, 1); + if (ret) { + msg_perr("%s(): cannot enable SRP1 for " + "permanent WP\n", __func__); + break; + } + } + + break; + default: + msg_perr("%s(): invalid mode %d\n", __func__, wp_mode); + break; + } + + if (ret) + msg_cerr("%s(): error=%d.\n", __func__, ret); + return ret; +} + +/* W25P, W25X, and many flash chips from various vendors */ +struct wp wp_w25 = { + .list_ranges = w25_list_ranges, + .set_range = w25_set_range, + .enable = w25_enable_writeprotect, + .disable = w25_disable_writeprotect, + .wp_status = w25_wp_status, + +}; + +/* W25Q series has features such as a second status register and SFDP */ +struct wp wp_w25q = { + .list_ranges = w25_list_ranges, + .set_range = w25_set_range, + .enable = w25q_enable_writeprotect, + /* + * By default, disable hardware write-protection. We may change + * this later if we want to add fine-grained write-protect disable + * as a command-line option. + */ + .disable = w25q_disable_writeprotect_default, + .wp_status = w25q_wp_status, +}; + +/* W25Q large series has 4 block-protect bits */ +struct wp wp_w25q_large = { + .list_ranges = w25_list_ranges, + .set_range = w25q_large_set_range, + .enable = w25q_enable_writeprotect, + /* + * By default, disable hardware write-protection. We may change + * this later if we want to add fine-grained write-protect disable + * as a command-line option. + */ + .disable = w25q_disable_writeprotect_default, + .wp_status = w25q_large_wp_status, +}; + /* Given a flash chip, this function returns its writeprotect info. */ static int generic_range_table(const struct flashctx *flash, struct wp_context **wp, diff --git a/writeprotect.h b/writeprotect.h index bded4c8..632f169 100644 --- a/writeprotect.h +++ b/writeprotect.h @@ -35,6 +35,11 @@ int (*wp_status)(const struct flashctx *flash); }; +/* winbond w25-series */ +extern struct wp wp_w25; /* older winbond chips (w25p, w25x, etc) */ +extern struct wp wp_w25q; +extern struct wp wp_w25q_large; /* large winbond chips (>= 32MB) */ + extern struct wp wp_generic; enum wp_mode get_wp_mode(const char *mode_str); -- To view, visit https://review.coreboot.org/c/flashrom/+/45572 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I54eedaa8e24c69d6d088e9ebcfb9a284e0fbe893 Gerrit-Change-Number: 45572 Gerrit-PatchSet: 1 Gerrit-Owner: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-MessageType: newchange

1 5

Change in flashrom[master]: spi25_statusreg: implement w25q_write_status_register()
by Edward O'Callaghan (Code Review) 06 Dec '21

06 Dec '21

Edward O'Callaghan has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/45749 ) Change subject: spi25_statusreg: implement w25q_write_status_register() ...................................................................... spi25_statusreg: implement w25q_write_status_register() Change-Id: Idd9f818cb3464b3221330e7aa66f44b2b6d2adf7 Signed-off-by: Edward O'Callaghan <quasisec(a)google.com> --- M chipdrivers.h M spi25_statusreg.c 2 files changed, 24 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/49/45749/1 diff --git a/chipdrivers.h b/chipdrivers.h index 4e76588..c2764b9 100644 --- a/chipdrivers.h +++ b/chipdrivers.h @@ -65,6 +65,7 @@ uint8_t spi_read_status_register(const struct flashctx *flash); uint8_t spi_read_status_register_2(const struct flashctx *flash); int spi_write_status_register(const struct flashctx *flash, int status); +int w25q_write_status_register(const struct flashctx *flash, uint8_t s0, uint8_t s1); void spi_prettyprint_status_register_bit(uint8_t status, int bit); int spi_prettyprint_status_register_plain(struct flashctx *flash); int spi_prettyprint_status_register_default_welwip(struct flashctx *flash); diff --git a/spi25_statusreg.c b/spi25_statusreg.c index cad92e6..fb49c96 100644 --- a/spi25_statusreg.c +++ b/spi25_statusreg.c @@ -27,6 +27,15 @@ int result; int i = 0; /* + * W25Q adds an optional byte to the standard WRSR opcode. If /CS is + * de-asserted after the first byte, then it acts like a JEDEC-standard + * WRSR command. if /CS is asserted, then the next data byte is written + * into status register 2. + */ + uint8_t s0 = status & 0xff; + uint8_t s1 = (status >> 8) & 0xff; + + /* * WRSR requires either EWSR or WREN depending on chip type. * The code below relies on the fact hat EWSR and WREN have the same * INSIZE and OUTSIZE. @@ -38,8 +47,8 @@ .readcnt = 0, .readarr = NULL, }, { - .writecnt = JEDEC_WRSR_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WRSR, (unsigned char) status }, + .writecnt = s1 > 0 ? (JEDEC_WRSR_OUTSIZE + 1) /* W25Q_WRSR_OUTSIZE */ : JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WRSR, s0, s1 }, .readcnt = 0, .readarr = NULL, }, { @@ -90,6 +99,18 @@ return ret; } +int w25q_write_status_register(const struct flashctx *flash, uint8_t s0, uint8_t s1) +{ + int feature_bits = flash->chip->feature_bits; + int ret = 1; + + if (!(feature_bits & FEATURE_WRSR_WREN)) + msg_cdbg("Missing status register write definition\n"); + if (feature_bits & FEATURE_WRSR_WREN) + ret = spi_write_status_register_flag(flash, ((s1 << 8) | s0), JEDEC_WREN); + return ret; +} + static uint8_t spi_read_status_register_generic(const struct flashctx *flash, uint8_t opcode) { const unsigned char cmd[JEDEC_RDSR_OUTSIZE] = { opcode }; -- To view, visit https://review.coreboot.org/c/flashrom/+/45749 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Idd9f818cb3464b3221330e7aa66f44b2b6d2adf7 Gerrit-Change-Number: 45749 Gerrit-PatchSet: 1 Gerrit-Owner: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-MessageType: newchange

1 1

Change in flashrom[master]: flashchips.c: Add writeprotect to selected chips
by Edward O'Callaghan (Code Review) 06 Dec '21

06 Dec '21

Edward O'Callaghan has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/45752 ) Change subject: flashchips.c: Add writeprotect to selected chips ...................................................................... flashchips.c: Add writeprotect to selected chips These chips are the ones tested in the ChromiumOS Flashrom fork so we are just upstreaming those at the moment. BUG=b:153800563 BRANCH=none TEST=builds Change-Id: I90c34ff9c34ff40fa186244024614c40954f4498 Signed-off-by: Edward O'Callaghan <quasisec(a)google.com> --- M flashchips.c 1 file changed, 6 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/52/45752/1 diff --git a/flashchips.c b/flashchips.c index 7d10abf..7ece354 100644 --- a/flashchips.c +++ b/flashchips.c @@ -21,6 +21,7 @@ #include "flash.h" #include "flashchips.h" #include "chipdrivers.h" +#include "writeprotect.h" /** * List of supported flash chips. @@ -5959,6 +5960,7 @@ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1695, 1950}, + .wp = &wp_generic, }, { @@ -6396,6 +6398,7 @@ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, + .wp = &wp_generic, }, { @@ -8277,6 +8280,7 @@ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, + .wp = &wp_generic, }, { @@ -8613,6 +8617,7 @@ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, + .wp = &wp_generic, }, { @@ -8767,6 +8772,7 @@ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, + .wp = &wp_generic, }, { -- To view, visit https://review.coreboot.org/c/flashrom/+/45752 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I90c34ff9c34ff40fa186244024614c40954f4498 Gerrit-Change-Number: 45752 Gerrit-PatchSet: 1 Gerrit-Owner: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-MessageType: newchange

2 4

2024

2023

2022

2021

2020

2019

2018

2017

flashrom-gerrit October 2021