December 2019 - flashrom-gerrit

Change in flashrom[master]: cbtable.c: don't assume high addresses can fully map 1 MiB
by Edward O'Callaghan (Code Review) Jan. 25, 2021

Jan. 25, 2021

Edward O'Callaghan has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/37240 ) Change subject: cbtable.c: don't assume high addresses can fully map 1 MiB ...................................................................... cbtable.c: don't assume high addresses can fully map 1 MiB Forward port the downstream `commit b17e9e41838`. When using a forwarding table entry for finding the coreboot table don't assume one has access to a full 1 MiB where the forwarding table entry points to. The reason is that the 1 MiB may cover address regions that have differing cacheability type. As such the kernel will complain and the mapping will fail. Instead, check the header first then map in the bytes that it indicates after sanity validation. That way there is no attempt at requesting an invalid mapping that spans different memory cacheability attributes. BUG=b:66681446 BRANCH=None TEST=Can successfully run 'flashrom -p host --wp-status' on kahlee without generating PAT errors. Original-Change-Id: Ic6c5832b069300cced66e11f4ca4a0bbc6e496de Original-Signed-off-by: Aaron Durbin <adurbin(a)chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/685608 Original-Reviewed-by: Martin Roth <martinroth(a)chromium.org> Original-Reviewed-by: Justin TerAvest <teravest(a)chromium.org> Change-Id: I43705c19dd7c816098d03f528bde6f180c4c8f24 Signed-off-by: Edward O'Callaghan <quasisec(a)chromium.org> --- M cbtable.c 1 file changed, 61 insertions(+), 8 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/40/37240/1 diff --git a/cbtable.c b/cbtable.c index e566840..38a9f11 100644 --- a/cbtable.c +++ b/cbtable.c @@ -210,6 +210,66 @@ return NULL; } +static struct lb_header *find_lb_table_remap(unsigned long start_addr, + uint8_t **table_area) +{ + size_t offset; + unsigned long addr, end; + size_t mapping_size; + void *base; + + mapping_size = getpagesize(); + offset = start_addr % getpagesize(); + start_addr -= offset; + + base = physmap_ro("high tables", start_addr, mapping_size); + if (ERROR_PTR == base) { + msg_perr("Failed getting access to coreboot high tables.\n"); + return NULL; + } + + for (addr = offset, end = getpagesize(); addr < end; addr += 16) { + struct lb_record *recs; + struct lb_header *head; + + /* No more headers to check. */ + if (end - addr < sizeof(*head)) + return NULL; + + head = (struct lb_header *)(((char *)base) + addr); + + if (!lb_header_valid(head, addr)) + continue; + + if (mapping_size - addr < head->table_bytes + sizeof(*head)) { + size_t prev_mapping_size = mapping_size; + mapping_size = head->table_bytes + sizeof(*head); + mapping_size += addr; + mapping_size += getpagesize() - + (mapping_size % getpagesize()); + physunmap(base, prev_mapping_size); + base = physmap_ro("high tables", start_addr, + mapping_size); + if (ERROR_PTR == base) { + msg_perr("Failed getting access to coreboot high tables.\n"); + return NULL; + } + } + + head = (struct lb_header *)(((char *)base) + addr); + recs = + (struct lb_record *)(((char *)base) + addr + sizeof(*head)); + if (!lb_table_valid(head, recs)) + continue; + msg_pdbg("Found coreboot table at 0x%08lx.\n", addr); + *table_area = base; + return head; + } + + physunmap(base, mapping_size); + return NULL; +} + static void find_mainboard(struct lb_record *ptr, unsigned long addr) { struct lb_mainboard *rec; @@ -283,15 +343,8 @@ (((char *)lb_table) + lb_table->header_bytes); if (forward->tag == LB_TAG_FORWARD) { start = forward->forward; - start &= ~(getpagesize() - 1); physunmap_unaligned(table_area, BYTES_TO_MAP); - // FIXME: table_area is never unmapped below, nor is it unmapped above in the no-forward case - table_area = physmap_ro_unaligned("high tables", start, BYTES_TO_MAP); - if (ERROR_PTR == table_area) { - msg_perr("Failed getting access to coreboot high tables.\n"); - return -1; - } - lb_table = find_lb_table(table_area, 0x00000, 0x1000); + lb_table = find_lb_table_remap(start, &table_area); } } -- To view, visit https://review.coreboot.org/c/flashrom/+/37240 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I43705c19dd7c816098d03f528bde6f180c4c8f24 Gerrit-Change-Number: 37240 Gerrit-PatchSet: 1 Gerrit-Owner: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-MessageType: newchange

5 13

Change in flashrom[master]: flashchips: upstream AT25SF128A from chromiumos
by Alan Green (Code Review) Jan. 6, 2021

Jan. 6, 2021

Alan Green has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/37543 ) Change subject: flashchips: upstream AT25SF128A from chromiumos ...................................................................... flashchips: upstream AT25SF128A from chromiumos Upstream the AT25SF128A chip from chromiumos repository. Change-Id: I6349aa41eee0c997aaa507383aff7ce26441d24f --- M flashchips.c M flashchips.h 2 files changed, 39 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/43/37543/1 diff --git a/flashchips.c b/flashchips.c index 4324c11..fc4cdff 100644 --- a/flashchips.c +++ b/flashchips.c @@ -2293,6 +2293,44 @@ { .vendor = "Atmel", + .name = "AT25SF128A", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25SF128A, + .total_size = 16384, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PR, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 512} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 2000}, + }, + + { + .vendor = "Atmel", .name = "AT25SF161", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, diff --git a/flashchips.h b/flashchips.h index 2c2da6c..5609527 100644 --- a/flashchips.h +++ b/flashchips.h @@ -151,6 +151,7 @@ #define ATMEL_AT25SF081 0x8501 #define ATMEL_AT25SF161 0x8601 #define ATMEL_AT25SL128A 0x4218 +#define ATMEL_AT25SF128A 0x8901 /* Adesto AT25SF128A */ #define ATMEL_AT26DF041 0x4400 #define ATMEL_AT26DF081 0x4500 /* guessed, no datasheet available */ #define ATMEL_AT26DF081A 0x4501 -- To view, visit https://review.coreboot.org/c/flashrom/+/37543 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I6349aa41eee0c997aaa507383aff7ce26441d24f Gerrit-Change-Number: 37543 Gerrit-PatchSet: 1 Gerrit-Owner: Alan Green <avg(a)google.com> Gerrit-MessageType: newchange

3 4

Change in flashrom[master]: flashchips.c: Take GD25LQ128C/D from downstream
by Alan Green (Code Review) Jan. 6, 2021

Jan. 6, 2021

Alan Green has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/35478 ) Change subject: flashchips.c: Take GD25LQ128C/D from downstream ...................................................................... flashchips.c: Take GD25LQ128C/D from downstream Take the diffs for GD25LQ128C/D from the ChromiumOS flashrom repo. This chips was added in Chromium OS `commit 62cd8106` by furquan(a)google.com on 2016-07-18, and has been marked tested. Signed-off-by: Alan Green <avg(a)google.com> Change-Id: I4358392520507ddbfc654feb49fa982d49db2f28 --- M flashchips.c 1 file changed, 2 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/78/35478/1 diff --git a/flashchips.c b/flashchips.c index 3994c93..5c797fd 100644 --- a/flashchips.c +++ b/flashchips.c @@ -5894,7 +5894,7 @@ .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -5916,8 +5916,7 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1695, 1950}, -- To view, visit https://review.coreboot.org/c/flashrom/+/35478 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I4358392520507ddbfc654feb49fa982d49db2f28 Gerrit-Change-Number: 35478 Gerrit-PatchSet: 1 Gerrit-Owner: Alan Green <avg(a)google.com> Gerrit-MessageType: newchange

4 10

Change in flashrom[master]: flashchips.c: Take GD25LQ40 from downstream
by Alan Green (Code Review) Jan. 6, 2021

Jan. 6, 2021

Alan Green has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/35479 ) Change subject: flashchips.c: Take GD25LQ40 from downstream ...................................................................... flashchips.c: Take GD25LQ40 from downstream Take definition of GD25LQ40 from ChromiumOS repository. This chip was added in `commit 59543cd1` by dnschneid(a)chromium.org on 2016-04-27. The commit message notes that some testing had been done, even thought the .tested attribute was left as UNTESTED. Signed-off-by: Alan Green <avg(a)google.com> Change-Id: I978745b38536cda807adf07af4e4d093d0d93ad1 --- M flashchips.c 1 file changed, 2 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/79/35479/1 diff --git a/flashchips.c b/flashchips.c index 5c797fd..ac07fa8 100644 --- a/flashchips.c +++ b/flashchips.c @@ -6009,7 +6009,7 @@ .total_size = 512, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -6032,8 +6032,7 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1695, 1950}, -- To view, visit https://review.coreboot.org/c/flashrom/+/35479 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I978745b38536cda807adf07af4e4d093d0d93ad1 Gerrit-Change-Number: 35479 Gerrit-PatchSet: 1 Gerrit-Owner: Alan Green <avg(a)google.com> Gerrit-MessageType: newchange

2 7

Change in flashrom[master]: sb600spi.c: Don't access spibar directly
by Edward O'Callaghan (Code Review) Nov. 26, 2020

Nov. 26, 2020

Edward O'Callaghan has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/36433 ) Change subject: sb600spi.c: Don't access spibar directly ...................................................................... sb600spi.c: Don't access spibar directly Constrain the manner in which the global state of spibar is set and then subsequently accessed. This makes it easier to write unit-tests and instrument the code. Change-Id: Ic26372b9c1baebb20716eea1db1e942239ed3e48 Signed-off-by: Edward O'Callaghan <quasisec(a)chromium.org> --- M sb600spi.c 1 file changed, 53 insertions(+), 38 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/33/36433/1 diff --git a/sb600spi.c b/sb600spi.c index 23b36ee..7bdd11f 100644 --- a/sb600spi.c +++ b/sb600spi.c @@ -40,7 +40,13 @@ *}; */ -static uint8_t *sb600_spibar = NULL; +static uint8_t *g_sb600_spibar = NULL; + +static inline uint8_t * get_spibar(void) +{ + return g_sb600_spibar; +} + enum amd_chipset { CHIPSET_AMD_UNKNOWN, CHIPSET_SB6XX, @@ -180,16 +186,18 @@ static void reset_internal_fifo_pointer(void) { - mmio_writeb(mmio_readb(sb600_spibar + 2) | 0x10, sb600_spibar + 2); + uint8_t *spibar = get_spibar(); + mmio_writeb(mmio_readb(spibar + 2) | 0x10, spibar + 2); /* FIXME: This loop needs a timeout and a clearer message. */ - while (mmio_readb(sb600_spibar + 0xD) & 0x7) + while (mmio_readb(spibar + 0xD) & 0x7) msg_pspew("reset\n"); } static int compare_internal_fifo_pointer(uint8_t want) { - uint8_t have = mmio_readb(sb600_spibar + 0xd) & 0x07; + uint8_t *spibar = get_spibar(); + uint8_t have = mmio_readb(spibar + 0xd) & 0x07; want %= FIFO_SIZE_OLD; if (have != want) { msg_perr("AMD SPI FIFO pointer corruption! Pointer is %d, wanted %d\n", have, want); @@ -224,8 +232,9 @@ static void execute_command(void) { msg_pspew("Executing... "); - mmio_writeb(mmio_readb(sb600_spibar + 2) | 1, sb600_spibar + 2); - while (mmio_readb(sb600_spibar + 2) & 1) + uint8_t *spibar = get_spibar(); + mmio_writeb(mmio_readb(spibar + 2) | 1, spibar + 2); + while (mmio_readb(spibar + 2) & 1) ; msg_pspew("done\n"); } @@ -239,7 +248,8 @@ unsigned char cmd = *writearr++; writecnt--; msg_pspew("%s, cmd=0x%02x, writecnt=%d, readcnt=%d\n", __func__, cmd, writecnt, readcnt); - mmio_writeb(cmd, sb600_spibar + 0); + uint8_t *spibar = get_spibar(); + mmio_writeb(cmd, spibar + 0); int ret = check_readwritecnt(flash, writecnt, readcnt); if (ret != 0) @@ -253,14 +263,14 @@ */ unsigned int readoffby1 = (writecnt > 0) ? 0 : 1; uint8_t readwrite = (readcnt + readoffby1) << 4 | (writecnt); - mmio_writeb(readwrite, sb600_spibar + 1); + mmio_writeb(readwrite, spibar + 1); reset_internal_fifo_pointer(); msg_pspew("Filling FIFO: "); unsigned int count; for (count = 0; count < writecnt; count++) { msg_pspew("[%02x]", writearr[count]); - mmio_writeb(writearr[count], sb600_spibar + 0xC); + mmio_writeb(writearr[count], spibar + 0xC); } msg_pspew("\n"); if (compare_internal_fifo_pointer(writecnt)) @@ -291,7 +301,7 @@ /* Skip the bytes we sent. */ msg_pspew("Skipping: "); for (count = 0; count < writecnt; count++) { - msg_pspew("[%02x]", mmio_readb(sb600_spibar + 0xC)); + msg_pspew("[%02x]", mmio_readb(spibar + 0xC)); } msg_pspew("\n"); if (compare_internal_fifo_pointer(writecnt)) @@ -299,14 +309,14 @@ msg_pspew("Reading FIFO: "); for (count = 0; count < readcnt; count++) { - readarr[count] = mmio_readb(sb600_spibar + 0xC); + readarr[count] = mmio_readb(spibar + 0xC); msg_pspew("[%02x]", readarr[count]); } msg_pspew("\n"); if (compare_internal_fifo_pointer(writecnt+readcnt)) return SPI_PROGRAMMER_ERROR; - if (mmio_readb(sb600_spibar + 1) != readwrite) { + if (mmio_readb(spibar + 1) != readwrite) { msg_perr("Unexpected change in AMD SPI read/write count!\n"); msg_perr("Something else is accessing the flash chip and causes random corruption.\n" "Please stop all applications and drivers and IPMI which access the flash chip.\n"); @@ -325,21 +335,22 @@ unsigned char cmd = *writearr++; writecnt--; msg_pspew("%s, cmd=0x%02x, writecnt=%d, readcnt=%d\n", __func__, cmd, writecnt, readcnt); - mmio_writeb(cmd, sb600_spibar + 0); + uint8_t *spibar = get_spibar(); + mmio_writeb(cmd, spibar + 0); int ret = check_readwritecnt(flash, writecnt, readcnt); if (ret != 0) return ret; /* Use the extended TxByteCount and RxByteCount registers. */ - mmio_writeb(writecnt, sb600_spibar + 0x48); - mmio_writeb(readcnt, sb600_spibar + 0x4b); + mmio_writeb(writecnt, spibar + 0x48); + mmio_writeb(readcnt, spibar + 0x4b); msg_pspew("Filling buffer: "); unsigned int count; for (count = 0; count < writecnt; count++) { msg_pspew("[%02x]", writearr[count]); - mmio_writeb(writearr[count], sb600_spibar + 0x80 + count); + mmio_writeb(writearr[count], spibar + 0x80 + count); } msg_pspew("\n"); @@ -347,7 +358,7 @@ msg_pspew("Reading buffer: "); for (count = 0; count < readcnt; count++) { - readarr[count] = mmio_readb(sb600_spibar + 0x80 + (writecnt + count) % FIFO_SIZE_YANGTZE); + readarr[count] = mmio_readb(spibar + 0x80 + (writecnt + count) % FIFO_SIZE_YANGTZE); msg_pspew("[%02x]", readarr[count]); } msg_pspew("\n"); @@ -375,16 +386,17 @@ { bool success = false; uint8_t speed = spispeed->speed; + uint8_t *spibar = get_spibar(); msg_pdbg("Setting SPI clock to %s (0x%x).\n", spispeed->name, speed); if (amd_gen >= CHIPSET_YANGTZE) { - rmmio_writew((speed << 12) | (speed << 8) | (speed << 4) | speed, sb600_spibar + 0x22); - uint16_t tmp = mmio_readw(sb600_spibar + 0x22); + rmmio_writew((speed << 12) | (speed << 8) | (speed << 4) | speed, spibar + 0x22); + uint16_t tmp = mmio_readw(spibar + 0x22); success = (((tmp >> 12) & 0xf) == speed && ((tmp >> 8) & 0xf) == speed && ((tmp >> 4) & 0xf) == speed && ((tmp >> 0) & 0xf) == speed); } else { - rmmio_writeb((mmio_readb(sb600_spibar + 0xd) & ~(0x3 << 4)) | (speed << 4), sb600_spibar + 0xd); - success = (speed == ((mmio_readb(sb600_spibar + 0xd) >> 4) & 0x3)); + rmmio_writeb((mmio_readb(spibar + 0xd) & ~(0x3 << 4)) | (speed << 4), spibar + 0xd); + success = (speed == ((mmio_readb(spibar + 0xd) >> 4) & 0x3)); } if (!success) { @@ -396,11 +408,12 @@ static int set_mode(struct pci_dev *dev, uint8_t read_mode) { - uint32_t tmp = mmio_readl(sb600_spibar + 0x00); + uint8_t *spibar = get_spibar(); + uint32_t tmp = mmio_readl(spibar + 0x00); tmp &= ~(0x6 << 28 | 0x1 << 18); /* Clear mode bits */ tmp |= ((read_mode & 0x6) << 28) | ((read_mode & 0x1) << 18); - rmmio_writel(tmp, sb600_spibar + 0x00); - if (tmp != mmio_readl(sb600_spibar + 0x00)) + rmmio_writel(tmp, spibar + 0x00); + if (tmp != mmio_readl(spibar + 0x00)) return 1; return 0; } @@ -409,6 +422,7 @@ { uint32_t tmp; uint8_t spispeed_idx = 3; /* Default to 16.5 MHz */ + uint8_t *spibar = get_spibar(); char *spispeed = extract_programmer_param("spispeed"); if (spispeed != NULL) { @@ -450,7 +464,7 @@ "Normal (up to 66 MHz)", /* 6 */ "Fast Read", /* 7 (Not defined in the Bolton datasheet.) */ }; - tmp = mmio_readl(sb600_spibar + 0x00); + tmp = mmio_readl(spibar + 0x00); uint8_t read_mode = ((tmp >> 28) & 0x6) | ((tmp >> 18) & 0x1); msg_pdbg("SpiReadMode=%s (%i)\n", spireadmodes[read_mode], read_mode); if (read_mode != 6) { @@ -463,11 +477,11 @@ } if (amd_gen >= CHIPSET_YANGTZE) { - tmp = mmio_readb(sb600_spibar + 0x20); + tmp = mmio_readb(spibar + 0x20); msg_pdbg("UseSpi100 is %sabled\n", (tmp & 0x1) ? "en" : "dis"); if ((tmp & 0x1) == 0) { - rmmio_writeb(tmp | 0x1, sb600_spibar + 0x20); - tmp = mmio_readb(sb600_spibar + 0x20) & 0x1; + rmmio_writeb(tmp | 0x1, spibar + 0x20); + tmp = mmio_readb(spibar + 0x20) & 0x1; if (tmp == 0) { msg_perr("Enabling Spi100 failed.\n"); return 1; @@ -475,7 +489,7 @@ msg_pdbg("Enabling Spi100 succeeded.\n"); } - tmp = mmio_readw(sb600_spibar + 0x22); /* SPI 100 Speed Config */ + tmp = mmio_readw(spibar + 0x22); /* SPI 100 Speed Config */ msg_pdbg("NormSpeedNew is %s\n", spispeeds[(tmp >> 12) & 0xf].name); msg_pdbg("FastSpeedNew is %s\n", spispeeds[(tmp >> 8) & 0xf].name); msg_pdbg("AltSpeedNew is %s\n", spispeeds[(tmp >> 4) & 0xf].name); @@ -483,15 +497,15 @@ } } else { if (amd_gen >= CHIPSET_SB89XX && amd_gen <= CHIPSET_HUDSON234) { - bool fast_read = (mmio_readl(sb600_spibar + 0x00) >> 18) & 0x1; + bool fast_read = (mmio_readl(spibar + 0x00) >> 18) & 0x1; msg_pdbg("Fast Reads are %sabled\n", fast_read ? "en" : "dis"); if (fast_read) { msg_pdbg("Disabling them temporarily.\n"); - rmmio_writel(mmio_readl(sb600_spibar + 0x00) & ~(0x1 << 18), - sb600_spibar + 0x00); + rmmio_writel(mmio_readl(spibar + 0x00) & ~(0x1 << 18), + spibar + 0x00); } } - tmp = (mmio_readb(sb600_spibar + 0xd) >> 4) & 0x3; + tmp = (mmio_readb(spibar + 0xd) >> 4) & 0x3; msg_pdbg("NormSpeed is %s\n", spispeeds[tmp].name); } return set_speed(dev, amd_gen, &spispeeds[spispeed_idx]); @@ -581,14 +595,14 @@ return 0; /* Physical memory has to be mapped at page (4k) boundaries. */ - sb600_spibar = rphysmap("SB600 SPI registers", tmp & 0xfffff000, 0x1000); - if (sb600_spibar == ERROR_PTR) + g_sb600_spibar = rphysmap("SB600 SPI registers", tmp & 0xfffff000, 0x1000); + if (g_sb600_spibar == ERROR_PTR) return ERROR_FATAL; /* The low bits of the SPI base address are used as offset into * the mapped page. */ - sb600_spibar += tmp & 0xfff; + g_sb600_spibar += tmp & 0xfff; int amd_gen = determine_generation(dev); if (amd_gen < 0) @@ -649,7 +663,8 @@ * * <1> see handle_speed */ - tmp = mmio_readl(sb600_spibar + 0x00); + uint8_t *spibar = get_spibar(); + tmp = mmio_readl(spibar + 0x00); msg_pdbg("(0x%08" PRIx32 ") SpiArbEnable=%i", tmp, (tmp >> 19) & 0x1); if (amd_gen >= CHIPSET_YANGTZE) msg_pdbg(", IllegalAccess=%i", (tmp >> 21) & 0x1); @@ -679,7 +694,7 @@ } if (amd_gen >= CHIPSET_SB89XX) { - tmp = mmio_readb(sb600_spibar + 0x1D); + tmp = mmio_readb(spibar + 0x1D); msg_pdbg("Using SPI_CS%d\n", tmp & 0x3); /* FIXME: Handle SpiProtect* configuration on Yangtze. */ } -- To view, visit https://review.coreboot.org/c/flashrom/+/36433 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ic26372b9c1baebb20716eea1db1e942239ed3e48 Gerrit-Change-Number: 36433 Gerrit-PatchSet: 1 Gerrit-Owner: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-MessageType: newchange

2 2

Change in flashrom[master]: sb600spi.c: Remove 'amd_gen' out of global state.
by Edward O'Callaghan (Code Review) Nov. 25, 2020

Nov. 25, 2020

Edward O'Callaghan has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/36432 ) Change subject: sb600spi.c: Remove 'amd_gen' out of global state. ...................................................................... sb600spi.c: Remove 'amd_gen' out of global state. Have 'determine_generation()' explicitly return 'amd_gen' and then pass the state into what requires it. Thus making the code more pure, easier to read and more unit-testable. Change-Id: I99fbad9486123c6b921eab83756de54a53ddfa7a Signed-off-by: Edward O'Callaghan <quasisec(a)chromium.org> --- M sb600spi.c 1 file changed, 12 insertions(+), 13 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/32/36432/1 diff --git a/sb600spi.c b/sb600spi.c index 8daaf03..23b36ee 100644 --- a/sb600spi.c +++ b/sb600spi.c @@ -51,7 +51,6 @@ CHIPSET_YANGTZE, CHIPSET_PROMONTORY, }; -static enum amd_chipset amd_gen = CHIPSET_AMD_UNKNOWN; #define FIFO_SIZE_OLD 8 #define FIFO_SIZE_YANGTZE 71 @@ -110,7 +109,7 @@ /* Determine the chipset's version and identify the respective SMBUS device. */ static int determine_generation(struct pci_dev *dev) { - amd_gen = CHIPSET_AMD_UNKNOWN; + enum amd_chipset amd_gen = CHIPSET_AMD_UNKNOWN; msg_pdbg2("Trying to determine the generation of the SPI interface... "); if (dev->device_id == 0x438d) { amd_gen = CHIPSET_SB6XX; @@ -173,11 +172,10 @@ "Please report this to flashrom(a)flashrom.org and include this log and\n" "the output of lspci -nnvx, thanks!\n", __func__, dev->vendor_id, dev->device_id); - if (amd_gen == CHIPSET_AMD_UNKNOWN) { + if (amd_gen == CHIPSET_AMD_UNKNOWN) msg_perr("Could not determine chipset generation."); - return -1; - } - return 0; + + return amd_gen; } static void reset_internal_fifo_pointer(void) @@ -373,7 +371,7 @@ { "800 kHz", 0x07 }, }; -static int set_speed(struct pci_dev *dev, const struct spispeed *spispeed) +static int set_speed(struct pci_dev *dev, enum amd_chipset amd_gen, const struct spispeed *spispeed) { bool success = false; uint8_t speed = spispeed->speed; @@ -407,7 +405,7 @@ return 0; } -static int handle_speed(struct pci_dev *dev) +static int handle_speed(struct pci_dev *dev, enum amd_chipset amd_gen) { uint32_t tmp; uint8_t spispeed_idx = 3; /* Default to 16.5 MHz */ @@ -496,10 +494,10 @@ tmp = (mmio_readb(sb600_spibar + 0xd) >> 4) & 0x3; msg_pdbg("NormSpeed is %s\n", spispeeds[tmp].name); } - return set_speed(dev, &spispeeds[spispeed_idx]); + return set_speed(dev, amd_gen, &spispeeds[spispeed_idx]); } -static int handle_imc(struct pci_dev *dev) +static int handle_imc(struct pci_dev *dev, enum amd_chipset amd_gen) { /* Handle IMC everywhere but sb600 which does not have one. */ if (amd_gen == CHIPSET_SB6XX) @@ -592,7 +590,8 @@ */ sb600_spibar += tmp & 0xfff; - if (determine_generation(dev) < 0) + int amd_gen = determine_generation(dev); + if (amd_gen < 0) return ERROR_NONFATAL; /* How to read the following table and similar ones in this file: @@ -725,10 +724,10 @@ return 0; } - if (handle_speed(dev) != 0) + if (handle_speed(dev, amd_gen) != 0) return ERROR_FATAL; - if (handle_imc(dev) != 0) + if (handle_imc(dev, amd_gen) != 0) return ERROR_FATAL; /* Starting with Yangtze the SPI controller got a different interface with a much bigger buffer. */ -- To view, visit https://review.coreboot.org/c/flashrom/+/36432 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I99fbad9486123c6b921eab83756de54a53ddfa7a Gerrit-Change-Number: 36432 Gerrit-PatchSet: 1 Gerrit-Owner: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-MessageType: newchange

5 15

Change in ...flashrom[master]: dediprog: Use 4BA page program without 0x12
by David Hendricks (Code Review) Aug. 25, 2020

Aug. 25, 2020

David Hendricks has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/30521 Change subject: dediprog: Use 4BA page program without 0x12 ...................................................................... dediprog: Use 4BA page program without 0x12 It's not clear exactly what the difference is between WRITE_MODE_4B_ADDR_256B_PAGE_PGM with and without _0x12 from the SF600 command spec, but the former seems to work more reliably. Tested using an SF600 (FW v7.2.21), IS25LP256D, W25Q256JV, and MX25L25735. Change-Id: I3cb37ec8838f5bb02948ed52b4a2906fa033cf83 Signed-off-by: David Hendricks <david.hendricks(a)gmail.com> --- M dediprog.c 1 file changed, 2 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/21/30521/1 diff --git a/dediprog.c b/dediprog.c index 2a190d2..303f1d5 100644 --- a/dediprog.c +++ b/dediprog.c @@ -398,7 +398,8 @@ } } else if (dedi_spi_cmd == WRITE_MODE_PAGE_PGM) { if (flash->chip->feature_bits & FEATURE_4BA_WRITE) { - data_packet[3] = WRITE_MODE_4B_ADDR_256B_PAGE_PGM_0x12; +// data_packet[3] = WRITE_MODE_4B_ADDR_256B_PAGE_PGM_0x12; + data_packet[3] = WRITE_MODE_4B_ADDR_256B_PAGE_PGM; data_packet[4] = JEDEC_BYTE_PROGRAM_4BA; use_4ba = true; } else if (flash->in_4ba_mode) { -- To view, visit https://review.coreboot.org/c/flashrom/+/30521 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I3cb37ec8838f5bb02948ed52b4a2906fa033cf83 Gerrit-Change-Number: 30521 Gerrit-PatchSet: 1 Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-MessageType: newchange

1 1

Change in flashrom[master]: sb600spi -> fchspi: Rename AMD SPI programmer
by Edward O'Callaghan (Code Review) June 24, 2020

June 24, 2020

Edward O'Callaghan has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/36434 ) Change subject: sb600spi -> fchspi: Rename AMD SPI programmer ...................................................................... sb600spi -> fchspi: Rename AMD SPI programmer The AMD FCH controller has two main SPI ip core variants, the so-called 'sb600' variant and the newer 'spi100' variant. The sb600spi.c driver supports both variants and so its name isn't very general. Here we rename it to be more general. Change-Id: Iad92fb224954d66968e7aeb75cb515f075a26ac8 Signed-off-by: Edward O'Callaghan <quasisec(a)chromium.org> --- M Makefile M chipset_enable.c R fchspi.c M meson.build M programmer.h 5 files changed, 11 insertions(+), 11 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/34/36434/1 diff --git a/Makefile b/Makefile index f0a1b61..143a8c1 100644 --- a/Makefile +++ b/Makefile @@ -767,7 +767,7 @@ FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1' PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o internal.o ifeq ($(ARCH), x86) -PROGRAMMER_OBJS += it87spi.o it85spi.o sb600spi.o amd_imc.o wbsio_spi.o mcp6x_spi.o +PROGRAMMER_OBJS += it87spi.o it85spi.o fchspi.o amd_imc.o wbsio_spi.o mcp6x_spi.o PROGRAMMER_OBJS += ichspi.o dmi.o ifeq ($(CONFIG_INTERNAL_DMI), yes) FEATURE_CFLAGS += -D'CONFIG_INTERNAL_DMI=1' diff --git a/chipset_enable.c b/chipset_enable.c index b55852c..e57a18e 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -1297,7 +1297,7 @@ return enable_flash_amd_via(dev, name, 0xE0); } -static int enable_flash_sb600(struct pci_dev *dev, const char *name) +static int enable_flash_fch(struct pci_dev *dev, const char *name) { uint32_t prot; uint8_t reg; @@ -1330,7 +1330,7 @@ internal_buses_supported &= BUS_LPC | BUS_FWH; - ret = sb600_probe_spi(dev); + ret = fch_probe_spi(dev); /* Read ROM strap override register. */ OUTB(0x8f, 0xcd6); @@ -1685,16 +1685,16 @@ const struct penable chipset_enables[] = { #if defined(__i386__) || defined(__x86_64__) {0x1002, 0x4377, B_PFL, OK, "ATI", "SB400", enable_flash_sb400}, - {0x1002, 0x438d, B_FLS, OK, "AMD", "SB600", enable_flash_sb600}, - {0x1002, 0x439d, B_FLS, OK, "AMD", "SB7x0/SB8x0/SB9x0", enable_flash_sb600}, + {0x1002, 0x438d, B_FLS, OK, "AMD", "SB600", enable_flash_fch}, + {0x1002, 0x439d, B_FLS, OK, "AMD", "SB7x0/SB8x0/SB9x0", enable_flash_fch}, {0x100b, 0x0510, B_PFL, NT, "AMD", "SC1100", enable_flash_sc1100}, {0x1022, 0x2080, B_PFL, OK, "AMD", "CS5536", enable_flash_cs5536}, {0x1022, 0x2090, B_PFL, OK, "AMD", "CS5536", enable_flash_cs5536}, {0x1022, 0x3000, B_PFL, OK, "AMD", "Elan SC520", get_flashbase_sc520}, {0x1022, 0x7440, B_PFL, OK, "AMD", "AMD-768", enable_flash_amd_768_8111}, {0x1022, 0x7468, B_PFL, OK, "AMD", "AMD-8111", enable_flash_amd_768_8111}, - {0x1022, 0x780e, B_FLS, OK, "AMD", "FCH", enable_flash_sb600}, - {0x1022, 0x790e, B_FLS, OK, "AMD", "FP4", enable_flash_sb600}, + {0x1022, 0x780e, B_FLS, OK, "AMD", "FCH", enable_flash_fch}, + {0x1022, 0x790e, B_FLS, OK, "AMD", "FP4", enable_flash_fch}, {0x1039, 0x0406, B_PFL, NT, "SiS", "501/5101/5501", enable_flash_sis501}, {0x1039, 0x0496, B_PFL, NT, "SiS", "85C496+497", enable_flash_sis85c496}, {0x1039, 0x0530, B_PFL, OK, "SiS", "530", enable_flash_sis530}, diff --git a/sb600spi.c b/fchspi.c similarity index 99% rename from sb600spi.c rename to fchspi.c index 7bdd11f..e0eab07 100644 --- a/sb600spi.c +++ b/fchspi.c @@ -579,7 +579,7 @@ return amd_imc_shutdown(dev); } -int sb600_probe_spi(struct pci_dev *dev) +int fch_probe_spi(struct pci_dev *dev) { struct pci_dev *smbus_dev; uint32_t tmp; diff --git a/meson.build b/meson.build index d1f663f..d4bbff7 100644 --- a/meson.build +++ b/meson.build @@ -182,7 +182,7 @@ srcs += 'it85spi.c' srcs += 'it87spi.c' srcs += 'mcp6x_spi.c' - srcs += 'sb600spi.c' + srcs += 'fchspi.c' srcs += 'wbsio_spi.c' endif config_bitbang_spi = true diff --git a/programmer.h b/programmer.h index e42c6bb..e2cadd9 100644 --- a/programmer.h +++ b/programmer.h @@ -657,8 +657,8 @@ /* mcp6x_spi.c */ int mcp6x_spi_init(int want_spi); -/* sb600spi.c */ -int sb600_probe_spi(struct pci_dev *dev); +/* fchspi.c */ +int fch_probe_spi(struct pci_dev *dev); /* wbsio_spi.c */ int wbsio_check_for_spi(void); -- To view, visit https://review.coreboot.org/c/flashrom/+/36434 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Iad92fb224954d66968e7aeb75cb515f075a26ac8 Gerrit-Change-Number: 36434 Gerrit-PatchSet: 1 Gerrit-Owner: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-MessageType: newchange

3 2

Change in flashrom[master]: sb600spi.c: Improve IMC runtime detection in handle_imc()
by Edward O'Callaghan (Code Review) June 24, 2020

June 24, 2020

Edward O'Callaghan has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/36424 ) Change subject: sb600spi.c: Improve IMC runtime detection in handle_imc() ...................................................................... sb600spi.c: Improve IMC runtime detection in handle_imc() The IMC detection in sb600spi is very rudimentary and incomplete. This expands it so that it can actually detect not only whether an IMC is in the system, but whether it's active or not. This is based off ChromiumOS's fork of flashrom where the solution looks to be originally authored by Martin Roth in b/62141938. Change-Id: I13fb2300475c06aad09a4f0e8cd032e212556b14 Signed-off-by: Edward O'Callaghan <quasisec(a)chromium.org> --- M sb600spi.c 1 file changed, 34 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/24/36424/1 diff --git a/sb600spi.c b/sb600spi.c index c89d5a9..3c83b7b 100644 --- a/sb600spi.c +++ b/sb600spi.c @@ -55,6 +55,15 @@ #define FIFO_SIZE_OLD 8 #define FIFO_SIZE_YANGTZE 71 +#define PM_INDEX 0xCD6 +#define PM_DATA 0xCD7 +#define ISA_CONTROL 0x04 +#define MMIO_EN 0x02 +#define ACPI_MMIO_BASE 0xFED80000 +#define MISC_BASE 0xE00 +#define STRAP_STATUS 0x80 +#define EC_ENABLE_STRAP 0x04 + static int sb600_spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); static int spi100_spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, @@ -80,6 +89,12 @@ .write_aai = default_spi_write_aai, }; +static uint8_t pm_ioread(uint8_t addr) +{ + OUTB(addr, PM_INDEX); + return INB(PM_DATA); +} + static int find_smbus_dev(uint16_t vendor, uint16_t device) { struct pci_dev *smbus_dev = pci_dev_find(vendor, device); @@ -522,6 +537,25 @@ return 0; } + /* On Yangtze and newer chips, check the EcEnableStrap bit */ + if ((amd_gen >= CHIPSET_YANGTZE) && (pm_ioread(ISA_CONTROL) & MMIO_EN )) { + uint8_t *AcpiMMIO = rphysmap("AMD ACPI registers", ACPI_MMIO_BASE & 0xfffff000, 0x1000); + if (AcpiMMIO != ERROR_PTR) { + AcpiMMIO += MISC_BASE + STRAP_STATUS; + uint32_t straps = mmio_readl(AcpiMMIO); + if ((straps & EC_ENABLE_STRAP) == 0){ + msg_pinfo("IMC is not active.\n"); + return 0; + } else { + msg_pinfo("IMC IS active! Straps: %08x (%p)\n", straps, (void *)AcpiMMIO); + msg_pinfo("StrapOverride: %08x\n", mmio_readl(AcpiMMIO + 4)); + } + + } else { + msg_pinfo("Error reading AMD ACPI registers.\n"); + } + } + if (!amd_imc_force) programmer_may_write = 0; msg_pinfo("Writes have been disabled for safety reasons because the presence of the IMC\n" -- To view, visit https://review.coreboot.org/c/flashrom/+/36424 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I13fb2300475c06aad09a4f0e8cd032e212556b14 Gerrit-Change-Number: 36424 Gerrit-PatchSet: 1 Gerrit-Owner: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-MessageType: newchange

3 4

Change in flashrom[master]: Fix a handful of compiler warnings
by Ryan O'Leary (Code Review) May 27, 2020

May 27, 2020

Ryan O'Leary has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/36946 ) Change subject: Fix a handful of compiler warnings ...................................................................... Fix a handful of compiler warnings These warnings (which I believe are not enabled by default) were generated by -Wformat-security and -Wenum-conversion. Change-Id: I3d01f4ff620f4c4111dd675d49ce3254f2360b29 Signed-off-by: Ryan O'Leary <ryanoleary(a)google.com> --- M libflashrom.c M print.c M programmer.h 3 files changed, 7 insertions(+), 5 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/46/36946/1 diff --git a/libflashrom.c b/libflashrom.c index 0dec22e..b15b5f6 100644 --- a/libflashrom.c +++ b/libflashrom.c @@ -188,7 +188,8 @@ for (; i < boards_known_size; ++i) { supported_boards[i].vendor = binfo[i].vendor; supported_boards[i].name = binfo[i].name; - supported_boards[i].working = binfo[i].working; + supported_boards[i].working = + (enum flashrom_test_state)binfo[i].working; } } else { msg_gerr("Memory allocation error!\n"); @@ -226,8 +227,9 @@ supported_chipsets[i].chipset = chipset[i].device_name; supported_chipsets[i].vendor_id = chipset[i].vendor_id; supported_chipsets[i].chipset_id = chipset[i].device_id; - supported_chipsets[i].status = chipset[i].status; - } + supported_chipsets[i].status = + (enum flashrom_test_state)chipset[i].status; + } } else { msg_gerr("Memory allocation error!\n"); } diff --git a/print.c b/print.c index 596fc53..173c7da 100644 --- a/print.c +++ b/print.c @@ -401,7 +401,7 @@ for (i = 0; i < maxboardlen - strlen(b->name); i++) msg_ginfo(" "); - msg_pinfo(test_state_to_text(b->working)); + msg_pinfo("%s", test_state_to_text(b->working)); for (e = board_matches; e->vendor_name != NULL; e++) { if (strcmp(e->vendor_name, b->vendor) diff --git a/programmer.h b/programmer.h index 5a21b2e..96add05 100644 --- a/programmer.h +++ b/programmer.h @@ -307,7 +307,7 @@ /* cbtable.c */ int cb_parse_table(const char **vendor, const char **model); -int cb_check_image(const uint8_t *bios, unsigned int size); +int cb_check_image(const uint8_t *image, unsigned int size); /* dmi.c */ #if defined(__i386__) || defined(__x86_64__) -- To view, visit https://review.coreboot.org/c/flashrom/+/36946 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I3d01f4ff620f4c4111dd675d49ce3254f2360b29 Gerrit-Change-Number: 36946 Gerrit-PatchSet: 1 Gerrit-Owner: Ryan O'Leary <ryanoleary(a)google.com> Gerrit-MessageType: newchange

7 19