Change in flashrom[master]: flashchips.c: Add support for XMC new spi flash types - flashrom-gerrit

30 Dec 2020

luke has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/49010 )
Change subject: flashchips.c: Add support for XMC new spi flash types
......................................................................
flashchips.c: Add support for XMC new spi flash types
XM25QU64C
    XM25QU128C
    XM25QU256C
    XM25QH64C
    XM25QH128C
    XM25QH256C
TEST=test
Signed-off-by: Luke He sixuerain@qq.com
Change-Id: I15c51b0f1ed789bcb2cabe33bc830f8d5d916969
Change-Id: I71e1ba0d739f080dd3030108d50da7667f75ced0
---
M flashchips.c
M flashchips.h
2 files changed, 245 insertions(+), 1 deletion(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/10/49010/1

diff --git a/flashchips.c b/flashchips.c
index c4a1e6f..3e27e79 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -18993,6 +18993,244 @@
    },
{
+		.vendor		= "XMC",
+		.name		= "XM25QH64C",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= ST_ID,
+		.model_id	= XMC_XM25QH64C,
+		.total_size	= 8192,
+		.page_size	= 256,
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
+		.tested		= TEST_OK_PREW,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 2048} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {32 * 1024, 256} },
+				.block_erase = spi_block_erase_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 128} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {8 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {8 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_plain,
+		.unlock		= spi_disable_blockprotect,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+		.voltage	= {2700, 3600},
+	},
+
+	{
+		.vendor		= "XMC",
+		.name		= "XM25QU64C",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= ST_ID,
+		.model_id	= XMC_XM25QU64C,
+		.total_size	= 8192,
+		.page_size	= 256,
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
+		.tested		= TEST_OK_PREW,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 2048} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {32 * 1024, 256} },
+				.block_erase = spi_block_erase_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 128} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {8 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {8 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_plain,
+		.unlock		= spi_disable_blockprotect,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+		.voltage	= {1650, 1950},
+	},
+
+	{
+		.vendor		= "XMC",
+		.name		= "XM25QH128C",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= ST_ID,
+		.model_id	= XMC_XM25QH128C,
+		.total_size	= 16384,
+		.page_size	= 256,
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
+		.tested		= TEST_OK_PREW,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 4096} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {32 * 1024, 512} },
+				.block_erase = spi_block_erase_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 256} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {16 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {16 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_plain,
+		.unlock		= spi_disable_blockprotect,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+		.voltage	= {2700, 3600},
+	},
+
+	{
+		.vendor		= "XMC",
+		.name		= "XM25QU128C",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= ST_ID,
+		.model_id	= XMC_XM25QU128C,
+		.total_size	= 16384,
+		.page_size	= 256,
+		/* supports SFDP */
+		/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
+		.tested		= TEST_OK_PREW,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 4096} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {32 * 1024, 512} },
+				.block_erase = spi_block_erase_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 256} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {16 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {16 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_plain, /* TODO: improve */
+		.unlock		= spi_disable_blockprotect,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+		.voltage	= {1650, 1950},
+	},
+
+	{
+		.vendor		= "XMC",
+		.name		= "XM25QH256C",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= ST_ID,
+		.model_id	= XMC_XM25QH256C,
+		.total_size	= 32768,
+		.page_size	= 256,
+		/* supports SFDP */
+		/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
+		/* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_ENTER_WREN
+			| FEATURE_4BA_EXT_ADDR | FEATURE_4BA_READ | FEATURE_4BA_FAST_READ,
+		.tested		= TEST_OK_PREW,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 8192} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {32 * 1024, 1024} },
+				.block_erase = spi_block_erase_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 512} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {32 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {32 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_plain, /* TODO: improve */
+		.unlock		= spi_disable_blockprotect,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+		.voltage	= {2700, 3600},
+	},
+
+	{
+		.vendor		= "XMC",
+		.name		= "XM25QU256C",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= ST_ID,
+		.model_id	= XMC_XM25QU256C,
+		.total_size	= 32768,
+		.page_size	= 256,
+		/* supports SFDP */
+		/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
+		/* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_ENTER_WREN
+			| FEATURE_4BA_EXT_ADDR | FEATURE_4BA_READ | FEATURE_4BA_FAST_READ,
+		.tested		= TEST_OK_PREW,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 8192} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {32 * 1024, 1024} },
+				.block_erase = spi_block_erase_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 512} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {32 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {32 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_plain, /* TODO: improve */
+		.unlock		= spi_disable_blockprotect,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+		.voltage	= {1650, 1950},
+	},
+
+	{
    	.vendor		= "Zetta Device",
    	.name		= "ZD25D20",
    	.bustype	= BUS_SPI,
diff --git a/flashchips.h b/flashchips.h
index 394eb30..a85fa6a 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -792,7 +792,7 @@
  * ST25P chips are SPI, first byte of device ID is memory type, second
  * byte of device ID is related to log(bitsize) at least for some chips.
  */
-#define ST_ID			0x20	/* ST / SGS/Thomson / Numonyx (later acquired by Micron) */
+#define ST_ID			0x20	/* ST / SGS/Thomson / Numonyx / XMC(later acquired by Micron) */
 #define ST_M25P05A		0x2010
 #define ST_M25P05_RES		0x05
 #define ST_M25P10A		0x2011
@@ -811,6 +811,12 @@
 #define ST_M45PE40		0x4013
 #define ST_M45PE80		0x4014
 #define ST_M45PE16		0x4015
+#define XMC_XM25QH64C		0x4017
+#define XMC_XM25QU64C		0x4117
+#define XMC_XM25QH128C		0x4018
+#define XMC_XM25QU128C		0x4118
+#define XMC_XM25QH256C		0x4019
+#define XMC_XM25QU256C		0x4119
 #define ST_M25PX80		0x7114
 #define ST_M25PX16		0x7115
 #define ST_M25PX32		0x7116
-- 
To view, visit https://review.coreboot.org/c/flashrom/+/49010
To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings

Gerrit-Project: flashrom
Gerrit-Branch: master
Gerrit-Change-Id: I71e1ba0d739f080dd3030108d50da7667f75ced0
Gerrit-Change-Number: 49010
Gerrit-PatchSet: 1
Gerrit-Owner: luke sixuerain@qq.com
Gerrit-MessageType: newchange



    